SSANGYONG - Tiger-Tools Kft.
SSANGYONG - Tiger-Tools Kft.
SSANGYONG - Tiger-Tools Kft.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Turning & Milling<br />
Turning & Milling<br />
GRADE INFORMATION<br />
GRADE INFORMATION<br />
Turning & Milling<br />
CERMET<br />
A matrix of TiCN with carbide as a metal binder, Ssangyong Cermets are tougher than ceramics and harder than<br />
tungsten carbides. It shows greater wear resistance than carbide and its cutting speed is also much higher than<br />
carbide. Cermet inserts give an excellent surface finish and high-speed machining.<br />
Four different grades for different workpiece and cutting condition.<br />
Ideal for high-speed finishing to milling of mild steel, carbon steel and alloy steel.<br />
Excellent performance in turning, grooving, boring, bearing and milling.<br />
Recommended Cutting Condition<br />
Application Grade Workpiece Cutting Style Velocity (V) Feed (f) Depth (DOC)<br />
(m/min) (mm/rev) (mm)<br />
Turning<br />
TX510<br />
TX515<br />
TX520<br />
Mild Steel, Carbon Steel,<br />
Alloy Steel<br />
Mild Steel, Carbon Steel,<br />
Alloy Steel<br />
Bearing Steel,<br />
General Steel<br />
Finishing<br />
Finishing<br />
Medium<br />
Finishing<br />
Medium<br />
100~600 0.03~0.3 0.1~1.5<br />
100~500 0.03~0.3 0.1~2.0<br />
100~400 0.03~0.3 0.1~2.0<br />
Turning & Milling<br />
TX510<br />
Excellent wear resistance<br />
Outstanding surface finish<br />
TiCN<br />
Fine-finishing and boring of steel<br />
Harder<br />
Milling<br />
TX530<br />
Mild Steel, Carbon Steel,<br />
Alloy Steel<br />
Medium<br />
Roughing<br />
100~400 0.1~0.3 < 5<br />
100~500 0.1~0.5 < 3<br />
TX515<br />
Wear resistance and high mechanical strength<br />
TiCN<br />
Finishing and boring of carbon steel<br />
and alloy steel<br />
Choice of Chipbreaker<br />
TX520<br />
Excellent thermal conducting and wear<br />
resistance<br />
TiCN<br />
The first choice for machining steel<br />
Turning, grooving, boring and bearing of steel<br />
TX530<br />
The toughest cermet grade<br />
TiCN<br />
Wide range of milling for steel materials<br />
Tougher<br />
Physical Properties<br />
Grade Composition Color Density Hardness Toughness Thermal Conductivity<br />
(g/cm 3 ) (HRA) (MPam 1/2 ) (cal/cm. sec. )<br />
TX510 TiCN Silver 6.50 93.50 7.00 0.08<br />
TX515 TiCN Silver 6.48 93.00 7.50 0.08<br />
TX520 TiCN Silver 6.53 92.50 8.00 0.09<br />
TX530 TiCN Silver 6.35 91.00 8.40 0.09<br />
Choice of Cermet Grade for Workpiece<br />
TX510 TX515 TX520 TX530<br />
GRAY CAST IRON <br />
MILD STEEL <br />
CARBON STEEL <br />
ALLOY STEEL <br />
FORGED STEEL<br />
<br />
Chipbreaker Style Shape Application Characteristics<br />
SF<br />
SY<br />
SG<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
HEAT TREATED STEEL<br />
<br />
A10<br />
STAINLESS STEEL <br />
HEAT RESISTANT STEEL <br />
: Excellent : Good<br />
A<br />
11
Change language