Owners Manual - MotorGuide
Owners Manual - MotorGuide
Owners Manual - MotorGuide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
12 Volt Battery Hook-up<br />
D<br />
E<br />
F<br />
36 Volt Battery Hook-up<br />
A<br />
D<br />
E<br />
F<br />
G<br />
H<br />
G<br />
I<br />
A) Black battery lead (-) D) Positive lead to main<br />
engine, bilge pumps,<br />
B) Red battery lead (+) aerators, accessories<br />
C) 50 amp circuit E) Common ground<br />
breaker<br />
F) Power cable<br />
G) Jumper Wire<br />
Connect the red battery lead to the battery positive (+)<br />
post and the black battery lead to the battery negative (-)<br />
post. Install a 50 amp circuit breaker in line with the<br />
positive lead as shown above.<br />
24 Volt Battery Hook-up<br />
C<br />
D<br />
C<br />
H<br />
E<br />
B<br />
F<br />
G<br />
J<br />
A<br />
K<br />
L<br />
B K<br />
C K<br />
A) Battery A H) To foot pedal<br />
B) Battery B (DS models only)<br />
C) Battery C I) To optional sonar display<br />
D) Positive lead to main (sonar ready models only)<br />
engine, bilge pumps, J) 50 amp circuit breaker<br />
aerators, accessories K) Jumper wire<br />
E) Common ground L) Red battery lead (+)<br />
F) Black battery lead (-)<br />
G) Power Cable<br />
Connect the black battery lead from the power cable to the<br />
negative (-) post on battery A. Connect the red battery<br />
lead from the power cable to the positive (+) post of<br />
battery C. Connect a jumper wire between the positive (+)<br />
post of battery A to the negative (-) post of battery B.<br />
Connect another jumper wire between the positive (+) post<br />
of battery B to negative (-) post of battery C. Install a 50<br />
amp circuit breaker in line with the positive battery lead as<br />
shown above.<br />
K<br />
A<br />
J<br />
I<br />
B<br />
J<br />
A) Battery A F) To foot pedal<br />
B) Battery B (DS models only)<br />
C) Positive lead to main G) To optional sonar display<br />
engine bilge pumps, (sonar ready models only)<br />
aerators, accessories H) Black battery lead (-)<br />
D) Common ground I) Red battery leads (+)<br />
E) Power cable J) Jumper wire<br />
K) 50 amp circuit breaker<br />
Connect the black battery lead from the power cable to the<br />
negative (-) post on battery A and the red lead to the<br />
positive (+) post on battery B. Connect a jumper wire<br />
between the negative (-) post of battery B and the positive<br />
(+) post of battery A. Install a 50 amp circuit breaker in<br />
line with the positive lead to battery B as shown above.<br />
90-MM6900 4