Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Camshaft Recommendation Form<br />
Name:_________________________________________________ Date:____________________________________________<br />
Address:_______________________________________________________________________________________________<br />
City:_______________________________________________State/Zip:____________________________________________<br />
Phone:_________________________________________________ Fax:____________________________________________<br />
Which Type Of Camshaft Are You Interested In:<br />
Hydraulic Roller Mushroom Other:<br />
Solid Hydraulic Roller Regrind<br />
Desired Engine Performance:<br />
More Low Speed Torque<br />
More Mid-Range Power<br />
Type Of Service Required:<br />
Recommend Cam and Kit<br />
Regrind Enclosed Cam<br />
Engine Application:<br />
Mid-Range and Top End Power<br />
Street Only Drag Race: Off-Road Only Marine:<br />
Street/Strip Oval Track: Truck/Tractor Pull Other:<br />
Engine SPECIFICATIONS:<br />
Track Length<br />
CYLINDER HEAD FLOW DATA:<br />
Engine Make:___________________________________Year:____________________________<br />
Bore: ______________Stroke:_______________Cubic Inches:____________________________<br />
Number of Cylinders:_____________________________Fuel:____________________________<br />
Circle 25" or 28" of water<br />
.200" Int______ Exh______<br />
.300" Int______ Exh______<br />
Rocker Arm Ratio:_Intake:__________Exhaust:____________Carburetor cfm:________________ .400" Int______ Exh______<br />
Rod Length:________________________ Total Venturi Area:____________________________ .500" Int______ Exh______<br />
Compression Ratio:____________________ Intake Manifold:____________________________ .600" Int______ Exh______<br />
Supercharger: Turbo: Boost P.S.I._________Valve Head Diameter:___________________ .700" Int______ Exh______<br />
Drive Ratio:________________________________ Valve Size:____________________________<br />
Intake: Exhaust:<br />
Tappet Diameter:______________________ Ported/Amount:____________________________<br />
.800" Int______ Exh______<br />
.900" Int______ Exh______<br />
CHASSIS/RPM INFORMATION:<br />
Weight:__________________________________________Year and Make:____________________________________________<br />
Rear Axle Ratio:_________________________________Transmission Type:____________________________________________<br />
Minimum and Maximum RPM:_________________________ to<br />
Overdrive%:____________________________________________<br />
Stall Speed:________________________________ Tire Size and Diameter:____________________________________________<br />
CURRENT CAMSHAFT INFORMATION:<br />
Complete all of the above information and send to:<br />
Type Of Tappet Design (Hydraulic, Solid, Roller, etc):__________________<br />
Attn: Camshaft Technical Support<br />
Advertised Duration: Intake:______________ Exhaust:_______________ CROWER CAMS & EQUIPMENT COMPANY, Inc.<br />
Duration at .050": Intake:______________ Exhaust:_______________ 6180 Business Center Court<br />
San Diego, CA 92154-5604<br />
Lobe Lift (w/o ratio): Intake:______________ Exhaust:_______________<br />
For faster service fax this form to 619-661-6466 or<br />
Lobe Separation:______________________________________________ complete the form online at www.crower.com<br />
Performance Remarks:__________________________________________<br />
118 For technical support call 619-661-6477 or visit www.crower.com<br />
Class<br />
Hull Specs/Prop or Jet Drive
Change language