NEWS 2005 - Jan Havelka

AUTOMOTIVE
AEROSPACE
HEAVY EQUIPMENT
OIL & GAS
NEWS 2005
GENERAL ENGINEERING
www.kennametal.com
metric/inch
NEWS 1/05

To Our Valued Customers:
Since its inception in 1938, Kennametal has
precisely understood how to improve your
manufacturing performance and profitability
– by introducing unparalleled products and services
to reduce your operating costs and lead times.
These 200+ pages bring you the latest advancements
in holemaking, milling, and tooling systems products…
all specifically engineered to significantly boost your
overall productivity, even in the most challenging
metalworking applications.
At Kennametal, the world’s premier
tooling solutions supplier, we’re
engineering your competitive edge.
Kennametal Metalworking
Solutions and Services Group

Table of Contents
New
Holemaking Products
A1
New
Milling Products
B1
New
Tooling Systems Products
C1
New Lathe Tooling Catalog
D1

Holemaking pages A1-A59
• High-Performance Solid Carbide Drills
• KenTIP BF Version and 8xD
• KSEM HPG Inserts
• ModBORE HSK
• Romicron Modular System
NEW
Tooling Systems pages C1-C49
• Slim Line Hydraulic Chuck
• KM25 / KM3225
• Shrink Fit
• Driven Tools
NEW
2

NEW CUTTING TOOLS
...engineered specifically to boost your Metalcutting
productivity and profitability!
Milling pages B1-B113
• Mill1
• KSSM
• KSCM for Aluminum Machining
• KSOM Mini
• M780
• Solid Carbide End Mills for
Aerospace Applications
NEW
Lathe Tooling
• New Global Turning book!
• Hundreds of new Turning
Products!
• Available in 12 languages!
Ask your Kennametal
representative!
NEW
3

To place an order, contact your Kennametal
representative or visit www.kennametal.com.

Holemaking Products
Solid Carbide Drills
SE Drills B224HP & B225HP
SE Drills B210HP, B211HP, & B212HP
SE Drills B254HP, B255HP, & B256HP
Through Coolant High-Performance BF Drills
Modular Drills
KenTIP 3xD, 5xD, & 8xD, Round and SCF Shanks
KenTIP BF Drill Bodies
KenTIP HPM Insert Blades
KSEM HPGM Insert Blades
KSEM PCM Insert Blades
Indexable Insert Drills
DRILL-FIX DFR 4xD
HTS Cartridges with SPHX Inserts
HSK ModBORE
Simultaneous Twin Cutter
Single Cutter, Fine Boring Tooling
ROMICRON ®
Universal Application
Modular System
A4
A4
A8
A10
A12
A22
A22
A26
A30
A35
A38
A40
A40
A43
A46
A46
A48
A54
A54
A56
A1

SE DRILLS
B210HP / B211HP / B212HP
NEW
Outstanding geometry
and grade combination for
drilling stainless steel and hightemperature
alloys. Low cutting
forces – high hole quality!
Now available in new diameters
and lengths!
See page A8.
SE DRILLS
B224HP / B225HP
Ideal for super high-speed
drilling of unalloyed and
alloyed steel. Twice as fast as
competitive drills – with longer
tool life!
NEW
Now available in additional
diameters!
See page A4.
A2

FOR SOLID CARBIDE DRILLS
...engineered specifically to boost your Holemaking
productivity and profitability!
SE DRILLS
B254HPC / B255HPC / B256HPC
Get excellent hole quality in
difficult irons with the HPC point
geometry and grade KC7315!
NEW
Now available in additional
diameters!
See page A10.
BF DRILL B343HP
with Internal Cooling
NEW
Produce holes, chamfers, and spot
face in one high-speed operation!
Now available with coolant holes!
See page A13.
A3

SOLID CARBIDE DRILLING
SE DRILLS – B224HP
NEW
Diameter Expansion!
L5
A
Shank
F
Shank
Tolerances
135° D1
D
D1 Tolerance m7 D1 Tolerance h6
>3 to 6 0,004 /0,016 6 .0000/-.0008
>6 to 10 0,006/0,021 8 to 10 .0000/-.0009
>10 to 18 0,007 /0,025 12 to 18 .0000/-.0011
>18 to 20 0,008 /0,029 20 .0000/-.0013
MODULAR DRILLING
L4
L3
L
LS
INDEXABLE DRILLING
HOLEMAKING
HSK MODBORE
ROMICRON
D1
mm inch
Catalog number
A/F
KC7315
KC7315
A F D L L3
L4
max. LS L5
3,00 .1181 B224 03000HP 6 62 24 18 36 0,5
3,10 .1220 B224 03100HP 6 62 24 18 36 0,5
3,20 .1260 B224 03200HP 6 62 24 18 36 0,5
3,30 .1299 B224 03300HP 6 62 24 18 36 0,6
3,40 .1340 B224 03400HP 6 62 24 18 36 0,6
3,50 .1378 B224 03500HP 6 62 24 18 36 0,6
3,60 .1417 B224 03600HP 6 62 24 18 36 0,6
3,70 .1457 B224 03700HP 6 62 24 18 36 0,6
3,80 .1496 B224 03800HP 6 62 24 18 36 0,7
3,90 .1535 B224 03900HP 6 62 24 18 36 0,7
4,00 .1575 B224 04000HP 6 66 24 17 36 0,7
4,20 .1654 B224 04200HP 6 66 24 17 36 0,7
5,00 .1969 B224 05000HP 6 66 28 20 36 0,8
5,10 .2008 B224 05100HP 6 66 28 20 36 0,9
5,50 .2165 B224 05500HP 6 66 28 20 36 0,9
6,00 .2362 B224 06000HP 6 66 28 20 36 1
6,50 .2559 B224 06500HP 8 79 34 24 36 1,1
6,80 .2677 B224 06800HP 8 79 34 24 36 1,1
7,00 .2756 B224 07000HP 8 79 34 24 36 1,2
7,40 .2913 B224 07400HP 8 79 41 29 36 1,3
7,50 .2953 B224 07500HP 8 79 41 29 36 1,3
8,00 .3150 B224 08000HP 8 79 41 29 40 1,3
8,20 .3228 B224 08200HP 10 89 47 35 40 1,4
8,40 .3307 B224 08400HP 10 89 47 35 40 1,4
8,50 .3346 B224 08500HP 10 89 47 35 40 1,4
8,70 .3425 B224 08700HP 10 89 47 35 40 1,5
8,80 .3465 B224 08800HP 10 89 47 35 40 1,5
9,00 .3543 B224 09000HP 10 89 47 35 40 1,5
9,50 .3740 B224 09500HP 10 89 47 35 40 1,6
10,00 .3937 B224 10000HP 10 89 47 35 40 1,7
10,20 .4016 B224 10200HP 12 102 55 40 45 1,7
10,30 .4055 B224 10300HP 12 102 55 40 45 1,7
10,40 .4094 B224 10400HP 12 102 55 40 45 1,7
10,50 .4134 B224 10500HP 12 102 55 40 45 1,8
10,80 .4252 B224 10800HP 12 102 55 40 45 1,8
11,00 .4331 B224 11000HP 12 102 55 40 45 1,8
11,50 .4528 B224 11500HP 12 102 55 40 45 1,9
12,00 .4724 B224 12000HP 12 102 55 40 45 2
12,50 .4921 B224 12500HP 14 107 60 43 45 2,1
13,00 .5118 B224 13000HP 14 107 60 43 45 2,2
13,50 .5315 B224 13500HP 14 107 60 43 45 2,3
14,00 .5512 B224 14000HP 14 107 60 43 45 2,3
14,50 .5709 B224 14500HP 16 115 65 45 48 2,4
15,00 .5906 B224 15000HP 16 115 65 45 48 2,5
15,50 .6102 B224 15500HP 16 115 65 45 48 2,6
15,60 .6142 B224 15600HP 16 115 65 45 48 2,6
16,00 .6299 B224 16000HP 16 115 65 45 48 2,7
16,50 .6496 B224 16500HP 18 123 73 51 48 2,8
17,00 .6693 B224 17000HP 18 123 73 51 48 2,8
17,50 .6890 B224 17500HP 18 123 73 51 48 2,9
18,00 .7087 B224 18000HP 18 123 73 51 48 3
19,00 .7480 B224 19000HP 20 131 79 55 50 3,2
20,00 .7874 B224 20000HP 20 131 79 55 50 3,3
Order example:
(Ø 3,0 mm, straight shank without clamping
surface, TiAIN coated carbide)
Type Ø Cutting material
B224 A 03000HP KC7315
Shank design
A4
To place an order, contact your Kennametal representative or visit www.kennametal.com.

L5
A
Shank
F
Shank
SE DRILLS – B225HP
Diameter Expansion!
Tolerances
NEW
SOLID CARBIDE DRILLING
135° D1
D
D1 Tolerance m7 D1 Tolerance h6
>3 to 6 0,004 /0,016 6 .0000/-.0008
>6 to 10 0,006/0,021 8 to 10 .0000/-.0009
>10 to 18 0,007 /0,025 12 to 18 .0000/-.0011
>18 to 20 0,008 /0,029 20 .0000/-.0013
L4
L3
L
LS
MODULAR DRILLING
D1
mm inch
Catalog number
A/F
KC7315
KC7315
A
F
D L L3
L4
max. LS L5
3,00 .1181 B225 03000HP 6 66 28 23 36 0,5
3,10 .1220 B225 03100HP 6 66 28 23 36 0,5
3,20 .1260 B225 03200HP 6 66 28 23 36 0,5
3,30 .1299 B225 03300HP 6 66 28 23 36 0,6
3,40 .1340 B225 03400HP 6 66 28 23 36 0,6
3,50 .1378 B225 03500HP 6 66 28 23 36 0,6
3,60 .1417 B225 03600HP 6 66 28 23 36 0,6
3,70 .1457 B225 03700HP 6 66 28 23 36 0,6
3,80 .1496 B225 03800HP 6 66 28 23 36 0,7
3,90 .1535 B225 03900HP 6 66 28 23 36 0,7
3,97 .1563 B225 03970HP 6 66 28 23 36 0,7
4,76 .1875 B225 04760HP 6 82 44 35 36 0,7
5,20 .2047 B225 05200HP 6 82 44 35 36 0,9
5,30 .2087 B225 05300HP 6 82 44 35 36 0,9
5,40 .2126 B225 05400HP 6 82 44 35 36 0,9
5,50 .2165 B225 05500HP 6 82 44 35 36 0,9
5,56 .2188 B225 05560HP 6 82 44 35 36 0,9
5,60 .2205 B225 05600HP 6 82 44 35 36 0,9
5,70 .2244 B225 05700HP 6 82 44 35 36 1
5,80 .2283 B225 05800HP 6 82 44 35 36 1
5,90 .2323 B225 05900HP 6 82 44 35 36 1
6,00 .2362 B225 06000HP 6 82 44 35 36 1
6,10 .2402 B225 06100HP 8 91 53 43 36 1
6,20 .2441 B225 06200HP 8 91 53 43 36 1
6,30 .2480 B225 06300HP 8 91 53 43 36 1,1
6,35 .2500 B225 06350HP 8 91 53 43 36 1,1
6,40 .2520 B225 06400HP 8 91 53 43 36 1,1
6,50 .2559 B225 06500HP 8 91 53 43 36 1,1
6,52 .2570 B225 06527HP 8 91 53 43 36 1,1
6,60 .2598 B225 06600HP 8 91 53 43 36 1,1
6,70 .2638 B225 06700HP 8 91 53 43 36 1,1
6,80 .2677 B225 06800HP 8 91 53 43 36 1,1
6,90 .2717 B225 06900HP 8 91 53 43 36 1,2
7,00 .2756 B225 07000HP 8 91 53 43 36 1,2
7,10 .2795 B225 07100HP 8 91 53 43 36 1,2
7,15 .2813 B225 07150HP 8 91 53 43 36 1,2
7,20 .2835 B225 07200HP 8 91 53 43 36 1,2
7,30 .2874 B225 07300HP 8 91 53 43 36 1,2
7,40 .2913 B225 07400HP 8 91 53 43 36 1,2
7,50 .2953 B225 07500HP 8 91 53 43 36 1,3
7,60 .2992 B225 07600HP 8 91 53 43 36 1,3
7,70 .3031 B225 07700HP 8 91 53 43 36 1,3
7,80 .3071 B225 07800HP 8 91 53 43 36 1,3
7,90 .3110 B225 07900HP 8 91 53 43 36 1,3
7,94 .3125 B225 07940HP 8 91 53 43 36 1,3
8,00 .3150 B225 08000HP 8 91 53 43 36 1,3
8,10 .3189 B225 08100HP 10 103 61 49 40 1,4
8,20 .3228 B225 08200HP 10 103 61 49 40 1,4
8,30 .3268 B225 08300HP 10 103 61 49 40 1,4
8,40 .3307 B225 08400HP 10 103 61 49 40 1,4
8,50 .3346 B225 08500HP 10 103 61 49 40 1,4
8,60 .3386 B225 08600HP 10 103 61 49 40 1,4
8,70 .3425 B225 08700HP 10 103 61 49 40 1,5
Continued on page A6.
D1
mm inch
KC7315
KC7315
Catalog number
A/F A
F
D L L3
L4
max. LS L5
8,80 .3465 B225 08800HP 10 103 61 49 40 1,5
8,90 .3504 B225 08900HP 10 103 61 49 40 1,5
9,00 .3543 B225 09000HP 10 103 61 49 40 1,5
9,10 .3583 B225 09100HP 10 103 61 49 40 1,5
9,20 .3622 B225 09200HP 10 103 61 49 40 1,5
9,30 .3661 B225 09300HP 10 103 61 49 40 1,6
9,40 .3701 B225 09400HP 10 103 61 49 40 1,6
9,50 .3740 B225 09500HP 10 103 61 49 40 1,6
9,53 .3750 B225 09530HP 10 103 61 49 40 1,6
9,60 .3780 B225 09600HP 10 103 61 49 40 1,6
9,70 .3819 B225 09700HP 10 103 61 49 40 1,6
9,80 .3858 B225 09800HP 10 103 61 49 40 1,6
9,90 .3898 B225 09900HP 10 103 61 49 40 1,7
10,00 .3937 B225 10000HP 10 103 61 49 40 1,7
10,10 .3976 B225 10100HP 12 118 71 56 45 1,7
10,20 .4016 B225 10200HP 12 118 71 56 45 1,7
10,30 .4055 B225 10300HP 12 118 71 56 45 1,7
10,40 .4094 B225 10400HP 12 118 71 56 45 1,7
10,50 .4134 B225 10500HP 12 118 71 56 45 1,8
10,60 .4173 B225 10600HP 12 118 71 56 45 1,8
10,70 .4213 B225 10700HP 12 118 71 56 45 1,8
10,72 .4219 B225 10720HP 12 118 71 56 45 1,8
10,80 .4252 B225 10800HP 12 118 71 56 45 1,8
10,90 .4291 B225 10900HP 12 118 71 56 45 1,8
11,00 .4331 B225 11000HP 12 118 71 56 45 1,8
11,10 .4370 B225 11100HP 12 118 71 56 45 1,9
11,11 .4375 B225 11110HP 12 118 71 56 45 1,9
11,20 .4409 B225 11200HP 12 118 71 56 45 1,9
11,30 .4449 B225 11300HP 12 118 71 56 45 1,9
11,40 .4488 B225 11400HP 12 118 71 56 45 1,9
11,50 .4528 B225 11500HP 12 118 71 56 45 1,9
11,60 .4567 B225 11600HP 12 118 71 56 45 1,9
11,70 .4606 B225 11700HP 12 118 71 56 45 2
11,80 .4646 B225 11800HP 12 118 71 56 45 2
11,90 .4685 B225 11900HP 12 118 71 56 45 2
12,00 .4724 B225 12000HP 12 118 71 56 45 2
12,10 .4764 B225 12100HP 14 124 77 60 45 2
12,20 .4803 B225 12200HP 14 124 77 60 45 2
12,30 .4843 B225 12300HP 14 124 77 60 45 2,1
12,40 .4882 B225 12400HP 14 124 77 60 45 2,1
12,50 .4921 B225 12500HP 14 124 77 60 45 2,1
12,60 .4961 B225 12600HP 14 124 77 60 45 2,1
12,70 .5000 B225 12700HP 14 124 77 60 45 2,1
12,80 .5039 B225 12800HP 14 124 77 60 45 2,1
12,90 .5079 B225 12900HP 14 124 77 60 45 2,2
13,00 .5118 B225 13000HP 14 124 77 60 45 2,2
13,10 .5157 B225 13100HP 14 124 77 60 45 2,2
13,20 .5197 B225 13200HP 14 124 77 60 45 2,2
13,30 .5236 B225 13300HP 14 124 77 60 45 2,2
13,40 .5276 B225 13400HP 14 124 77 60 45 2,2
13,50 .5315 B225 13500HP 14 124 77 60 45 2,3
13,60 .5354 B225 13600HP 14 124 77 60 45 2,3
13,70 .5394 B225 13700HP 14 124 77 60 45 2,3
HOLEMAKING
INDEXABLE DRILLING
HSK MODBORE
ROMICRON
Order example:
(Ø 3,0 mm, straight shank without clamping
surface, TiAIN coated carbide)
Type Ø Cutting material
B225 A 03000HP KC7315
Shank design
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A5

SOLID CARBIDE DRILLING
SE DRILLS – B225HP
NEW
Diameter Expansion!
Continued from page A5.
L5
A
Shank
F
Shank
Tolerances
135° D1
D
D1 Tolerance m7 D1 Tolerance h6
>3 to 6 0,004 /0,016 6 .0000/-.0008
>6 to 10 0,006/0,021 8 to 10 .0000/-.0009
>10 to 18 0,007 /0,025 12 to 18 .0000/-.0011
>18 to 20 0,008 /0,029 20 .0000/-.0013
MODULAR DRILLING
L4
L3
L
LS
INDEXABLE DRILLING
HOLEMAKING
HSK MODBORE
ROMICRON
D1
mm inch
KC7315
KC7315
Catalog number
A/F A
F
D L L3
L4
max. LS L5
13,80 .5433 B225 13800HP 14 124 77 60 45 2,3
13,90 .5472 B225 13900HP 14 124 77 60 45 2,3
14,00 .5512 B225 14000HP 14 124 77 60 45 2,3
14,10 .5551 B225 14100HP 16 133 83 63 48 2,4
14,20 .5591 B225 14200HP 16 133 83 63 48 2,4
14,30 .5630 B225 14300HP 16 133 83 63 48 2,4
14,40 .5669 B225 14400HP 16 133 83 63 48 2,4
14,50 .5709 B225 14500HP 16 133 83 63 48 2,4
14,60 .5748 B225 14600HP 16 133 83 63 48 2,4
14,70 .5787 B225 14700HP 16 133 83 63 48 2,5
14,80 .5827 B225 14800HP 16 133 83 63 48 2,5
14,90 .5866 B225 14900HP 16 133 83 63 48 2,5
15,00 .5906 B225 15000HP 16 133 83 63 48 2,5
15,10 .5945 B225 15100HP 16 133 83 63 48 2,5
15,20 .5984 B225 15200HP 16 133 83 63 48 2,5
15,30 .6024 B225 15300HP 16 133 83 63 48 2,6
15,40 .6063 B225 15400HP 16 133 83 63 48 2,6
15,50 .6102 B225 15500HP 16 133 83 63 48 2,6
15,60 .6142 B225 15600HP 16 133 83 63 48 2,6
15,70 .6181 B225 15700HP 16 133 83 63 48 2,6
15,80 .6220 B225 15800HP 16 133 83 63 48 2,6
15,90 .6260 B225 15900HP 16 133 83 63 48 2,7
16,00 .6299 B225 16000HP 16 133 83 63 48 2,7
16,10 .6339 B225 16100HP 18 143 93 71 48 2,7
16,50 .6496 B225 16500HP 18 143 93 71 48 2,8
17,00 .6693 B225 17000HP 18 143 93 71 48 2,8
17,50 .6890 B225 17500HP 18 143 93 71 48 2,9
17,70 .6969 B225 17700HP 18 143 93 71 48 3
18,00 .7087 B225 18000HP 18 143 93 71 48 3
18,50 .7283 B225 18500HP 20 153 101 77 50 3,1
19,00 .7480 B225 19000HP 20 153 101 77 50 3,2
19,05 .7500 B225 19050HP 20 153 101 77 50 3,2
19,25 .7580 B225 19250HP 20 153 101 77 50 3,2
19,30 .7598 B225 19300HP 20 153 101 77 50 3,2
19,50 .7677 B225 19500HP 20 153 101 77 50 3,3
20,00 .7874 B225 20000HP 20 153 101 77 50 3,3
20,50 .8071 B225 20500HP 20 153 101 77 50 3,4
21,00 .8268 B225 21000HP 20 167 112 85 50 3,5
Order example:
(Ø 13,8 mm, straight shank without clamping
surface, TiAIN coated carbide)
Type Ø Cutting material
B225 A 13800HP KC7315
Shank design
A6
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Cutting Groups
1.1
1.2
2.1
2.2
3
4
5
6
7
8
9
10
11
15
16
17
18
19
20
Material
Group
Unalloyed
Steel, Cast
Steel,
Machining
Steel
Low-Alloy
Steel, Cast
Steel,
Machining
Steel
High-Alloy
Steel, Cast
Steel, High-
Alloy Tool Steel
Gray Cast Iron
Cast Iron with
Nodular Cast
Iron
Malleable
Cast Iron
C = 0,10 - 0,25
C = 0,10 - 0,25
C = 0,25 - 0,55
C = 0,25 - 0,55
C = 0,25 - 0,55
C = 0,25 - 0,80
Composition /Structure
Annealed, long-chipping
Annealed, short-chipping
Annealed, long-chipping
Annealed, short-chipping
Tempered
Annealed
Tempered
Annealed
Tempered
Tempered
Tempered
Annealed
Hardened and Tempered
Pearlitic/Ferritic
Pearlitic (Martensitic)
Ferritic
Pearlitic
Ferritic
Pearlitic
Tensile Strength
RM (Mpa)
Hardness HB
420 125
420 125
640 190
640 190
850 250
915 270
1020 300
610 180
930 275
1020 300
1190 350
680 200
1100 325
180
260
160
250
130
230
Cutting
Speed vc:
(m/min)
(sfm)
200 - 240
660 - 790
220 - 260
720 - 850
180 - 220
590 - 720
200 - 240
660 - 790
140 - 180
460 - 590
140 - 180
460 - 590
120 - 160
390 - 520
140 - 180
460 - 590
120 - 160
390 - 520
120 - 160
390 - 520
100 - 140
330 - 460
140 - 180
460 - 590
100 - 140
330 - 460
140 - 180
460 - 590
100 - 140
330 - 460
140 - 180
460 - 590
100 - 140
330 - 460
160 - 200
520 - 660
160 - 200
520 - 660
SE DRILLS – B224HP & B225HP
D =
3 mm
.1181’’
D =
6 mm
.2362’’
Cutting Data Recommendations
Feed Rate Per Revolution by Drill Diameter:
(mm/rev)
(ipr)
D =
8 mm
.3150’’
D =
12 mm
.4724’’
D =
16 mm
.6299’’
D =
20 mm
.7843’’
0,07 - 0,11 0,10 - 0,17 0,13 - 0,21 0,17 - 0,28 0,19 - 0,32 0,22 - 0,36
.003 - .004 .004 - .007 .005 - .008 .007 - .011 .007 - .013 .009 - .014
0,07 - 0,11 0,10 - 0,17 0,13 - 0,21 0,17 - 0,28 0,19 - 0,32 0,22 - 0,36
.003 - .004 .004 - .007 .005 - .008 .007 - .011 .007 - .013 .009 - .014
0,08 - 0,13 0,11 - 0,19 0,14 - 0,23 0,18 - 0,30 0,21 - 0,35 0,24 - 0,39
.003 - .005 .004 - .007 .006 - .009 .007 - .012 .008 - .014 .009 - .015
0,08 - 0,13 0,11 - 0,19 0,14 - 0,23 0,18 - 0,30 0,21 - 0,35 0,24 - 0,39
.003 - .005 .004 - .007 .006 - .009 .007 - .012 .008 - .014 .009 - .015
0,10 - 0,16 0,14 - 0,23 0,17 - 0,29 0,22 - 0,37 0,26 - 0,44 0,29 - 0,49
.004 - .006 .006 - .009 .007 - .011 .009 - .015 .010 - .017 .011 - .019
0,10 - 0,16 0,14 - 0,23 0,17 - 0,29 0,22 - 0,37 0,26 - 0,44 0,29 - 0,49
.004 - .006 .006 - .009 0.01- .011 .009 - .015 .010 - .017 .011 - .014
0,10 - 0,16 0,14 - 0,23 0,17 - 0,29 0,22 - 0,37 0,26 - 0,44 0,29 - 0,49
.004 - .006 .006 - .009 .007 - .011 .009 - .015 .010 - .017 .011 - .014
0,09 - 0,16 0,13 - 0,22 0,16 - 0,27 0,21 - 0,35 0,25 - 0,41 0,28 - 0,46
.004 - .006 .005 - .009 .006 - .011 .008 - .014 .010 - .016 .011 - .018
0,08 - 0,14 0,11 - 0,20 0,15 - 0,25 0,19 - 0,32 0,23 - 0,38 0,25 - 0,42
.003 - .006 .004 - .008 .006 - .010 .007 - .013 .009 - .015 .010 - .017
0,08 - 0,13 0,11 - 0,19 0,14 - 0,23 0,18 - 0,30 0,21 - 0,35 0,24 - 0,39
.003 - .005 .004 - .007 .006 - .009 .007 - .012 .008 - .014 .009 - .015
0,08 - 0,13 0,11 - 0,19 0,14 - 0,23 0,18 - 0,30 0,21 - 0,35 0,24 - 0,39
.003 - .005 .004 - .007 .006 - .009 .007 - .012 .008 - .014 .009 - .015
0,07 - 0,12 0,10 - 0,16 0,12 - 0,20 0,16 - 0,26 0,18 - 0,31 0,21 - 0,34
.003 - .005 .004 - .006 .005 - .008 .006 - 0.01 .007 - .012 .008 - .013
0,07 - 0,12 0,10 - 0,16 0,12 - 0,20 0,16 - 0,26 0,18 - 0,31 0,21 - 0,34
.003 - .005 .004 - .006 .005 - .008 .006 - .010 .007 - .012 .008 - .013
0,10 - 0,17 0,15 - 0,25 0,18 - 0,31 0,24 - 0,39 0,28 - 0,46 0,31 - 0,52
.004 - .007 .006 - .010 .007 - .012 .009 - .015 .011 - .018 .012 - .020
0,09 - 0,15 0,13 - 0,22 0,16 - 0,26 0,20 - 0,34 0,24 - 0,40 0,27 - 0,45
.004 - .006 .005 - .009 .006 - .010 .008 - .013 .009 - .016 .011 - .018
0,09 - 0,15 0,12 - 0,21 0,15 - 0,26 0,20 - 0,33 0,23 - 0,39 0,26 - 0,44
.004 - .006 .005 - .008 .006 - .010 .008 - .013 .009 - .015 .010 - .017
0,08 - 0,13 0,11 - 0,18 0,14 - 0,23 0,17 - 0,29 0,21 - 0,34 0,23 - 0,38
.003 - .005 .004 - .007 .006 - .009 .007 - .011 .008 - .013 .009 - .015
0,07 - 0,12 0,11 - 0,18 0,13 - 0,22 0,17 - 0,28 0,20 - 0,33 0,22 - 0,37
.003 - .005 .004 - .007 .005 - .009 .007 - .011 .008 - .013 .009 - .015
0,08 - 0,13 0,11 - 0,19 0,14 - 0,23 0,18 - 0,30 0,21 - 0,35 0,23 - 0,39
.003 - .005 .004 - .007 .006 - .009 .007 - .012 .008 - .014 .009 - .015
SOLID CARBIDE DRILLING
MODULAR DRILLING
ROMICRON
HOLEMAKING
INDEXABLE DRILLING
HSK MODBORE
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A7

SOLID CARBIDE DRILLING
SE DRILLS – B210HP/B211HP & B212HP
NEW
Diameter Expansion!
L5
A
Shank
Tolerances
135° D1
D
D1 Tolerance m7 D Tolerance h6
>3 to 6 0,004 /0,016 6 .0000/-.0008
>6 to 10 0,006/0,021 8 to 10 .0000/-.0009
>10 to 18 0,007 /0,025 12 to 18 .0000/-.0011
>18 to 20 0,008 /0,029 20 .0000/-.0013
MODULAR DRILLING
L4
L3
L
LS
INDEXABLE DRILLING
HOLEMAKING
HSK MODBORE
ROMICRON
mm
D1
inch
Catalog number D L L3
L4
max. LS L5
3,00 .1181 B210A03000HP 6 62 24 18 36 0,55
3,18 .1250 B210A03175HP 6 62 24 18 36 0,59
3,30 .1299 B210A03300HP 6 62 24 18 36 0,61
3,50 .1378 B210A03500HP 6 62 24 18 36 0,65
3,70 .1457 B210A03700HP 6 62 24 18 36 0,68
3,00 .1181 B211A03000HP 6 66 28 23 36 0,55
3,05 .1200 B211A03048HP 6 66 28 23 36 0,56
3,10 .1220 B211A03100HP 6 66 28 23 36 0,57
3,18 .1250 B211A03175HP 6 66 28 23 36 0,59
3,20 .1260 B211A03200HP 6 66 28 23 36 0,59
3,30 .1299 B211A03300HP 6 66 28 23 36 0,61
3,40 .1340 B211A03400HP 6 66 28 23 36 0,63
3,45 .1360 B211A03454HP 6 66 28 23 36 0,64
3,50 .1378 B211A03500HP 6 66 28 23 36 0,65
3,60 .1417 B211A03600HP 6 66 28 23 36 0,66
3,66 .1440 B211A03658HP 6 66 28 23 36 0,68
3,70 .1457 B211A03700HP 6 66 28 23 36 0,68
3,80 .1496 B211A03800HP 6 66 28 23 36 0,7
3,86 .1520 B211A03861HP 6 66 28 23 36 0,71
3,90 .1535 B211A03900HP 6 66 28 23 36 0,72
3,00 .1181 B212A03000HP 6 78 40 33 36 0,55
3,18 .1250 B212A03175HP 6 78 40 33 36 0,59
3,30 .1299 B212A03300HP 6 78 40 33 36 0,61
3,50 .1378 B212A03500HP 6 78 40 33 36 0,65
3,70 .1457 B212A03700HP 6 78 40 33 36 0,68
4,00 .1575 B212A04000HP 6 87 49 41 36 0,74
4,10 .1614 B212A04100HP 6 87 49 41 36 0,76
4,20 .1654 B212A04200HP 6 87 49 41 36 0,77
4,50 .1772 B212A04500HP 6 87 49 41 36 0,83
4,80 .1890 B212A04800HP 6 94 56 48 36 0,89
8,00 .3150 B212A08000HP 8 110 72 61 36 1,48
8,40 .3307 B212A08400HP 10 122 80 68 40 1,54
8,50 .3346 B212A08500HP 10 122 80 68 40 1,57
8,80 .3465 B212A08800HP 10 122 80 68 40 1,63
9,00 .3543 B212A09000HP 10 122 80 68 40 1,66
9,50 .3740 B212A09500HP 10 122 80 68 40 1,76
10,00 .3937 B212A10000HP 10 122 80 68 40 1,85
10,20 .4016 B212A10200HP 12 141 94 79 45 1,89
10,50 .4134 B212A10500HP 12 141 94 79 45 1,94
11,00 .4331 B212A11000HP 12 141 94 79 45 2,03
11,80 .4646 B212A11800HP 12 141 94 79 45 2,18
12,00 .4724 B212A12000HP 12 141 94 79 45 2,22
12,50 .4921 B212A12500HP 14 155 108 91 45 2,31
13,00 .5118 B212A13000HP 14 155 108 91 45 2,4
13,50 .5315 B212A13500HP 14 155 108 91 45 2,49
14,00 .5512 B212A14000HP 14 155 108 91 45 2,59
15,00 .5906 B212A15000HP 16 171 121 101 48 2,77
16,00 .6299 B212A16000HP 16 171 121 101 48 2,96
KC7515
Order example:
(Ø 3,0 mm, straight shank without clamping
surface, TiAIN coated carbide)
Type Ø Cutting material
B210 A 03000HP KC7515
Shank design
A8
To place an order, contact your Kennametal representative or visit www.kennametal.com.

1.1
1.2
2.1
2.2
3
4
5
6
7
8
9
Cutting Groups
10
11
12
13
14.1
14.2
31
32
33
34
36
37
Material
Group
Unalloyed
Steel,
Cast Steel,
Machining
Steel
Low-Alloy
Steel,
Cast Steel,
Machining
Steel
High-Alloy
Steel, Cast
Steel, High-
Alloy Tool Steel
Stainless Steel,
Cast Steel
Stainless
Steel
Heat-Resistant
Alloys
Titanium
Alloys
Composition /Structure
C = 0,10 - 0,25 Annealed, long-chipping
C = 0,10 - 0,25 Annealed, short-chipping
C = 0,25 - 0,55 Annealed, long-chipping
C = 0,25 - 0,55 Annealed, short-chipping
C = 0,25 - 0,55
Tempered
C = 0,25 - 0,80
Annealed
Tempered
Annealed
Tempered
Tempered
Tempered
Annealed
Hardened and Tempered
Ferritic/Martensitic
Annealed
Martensitic
Tempered
Austenitic
Austenitic/Ferritic (duplex)
Fe-based
Annealed
Heat treated
Ni or Co-based
Annealed
Heat treated
Pure Titanium
Alpha-Beta Alloys
Tensile Strength
RM (Mpa)
Hardness HB
420 125
420 125
640 190
640 190
850 250
915 270
1020 300
610 180
930 275
1020 300
1190 350
680 200
1100 325
680 200
810 240
610 180
880 260
200
230
250
350
400 55 HRC
1050 55 HRC
SE DRILLS – B210HP/B211HP & B212HP
Cutting
Speed vc:
(m/min)
(sfm)
125 - 200
410 -660
125 - 200
410 - 660
125 - 190
410 - 620
125 - 180
410 - 590
100 - 180
330 - 590
100 - 180
330 - 590
100 - 180
330 - 590
140 - 180
460 - 590
120 - 160
390 - 520
100 - 140
330 - 460
80 - 120
260 - 390
120 - 160
390 - 520
70 - 100
230 - 330
70 - 90
220 - 300
60 - 90
200 - 300
60 - 90
200 - 300
40 - 70
131 - 230
15 20
45 65
15 20
45 65
20 30
65 90
10 30
35 90
30 55
90 180
30 55
90 180
D =
3 mm
.1181’’
Cutting Data Recommendations
Feed Rate Per Revolution by Drill Diameter:
(mm/rev)
(ipr)
D =
6 mm
.2362’’
D =
8 mm
.3150’’
D =
12 mm
.4724’’
D =
16 mm
.6299’’
D =
20 mm
.7843’’
0,05 - 0,08 0,10 - 0,17 0,13 - 0,21 0,17 - 0,28 0,19 - 0,32 0,22 - 0,36
.002 - .003 .004 - .007 .005 - .008 .007 - .011 .007 - .013 .009 - .014
0,05 - 0,08 0,10 - 0,17 0,13 - 0,21 0,17 - 0,28 0,19 - 0,32 0,22 - 0,36
.002 - .003 .004 - .007 .005 - .008 .007 - .011 .007 - .013 .009 - .014
0,06 - 0,09 0,11 - 0,19 0,14 - 0,23 0,18 - 0,30 0,21 - 0,35 0,24 - 0,39
.002 - .004 .004 - .007 .006 - .009 .007 - .012 .008 - .014 .009 - .015
0,08 - 0,12 0,12 - 0,19 0,14 - 0,23 0,18 - 0,30 0,21 - 0,35 0,24 - 0,39
.003 - .005 .005 - .007 .006 - .009 .007 - .012 .008 - .014 .009 - .015
0,08 - 0,12 0,14 - 0,23 0,17 - 0,29 0,22 - 0,37 0,26 - 0,44 0,29 - 0,49
.003 - .005 .006 - .009 .007 - .011 .009 - .015 .010 - .017 .011 - .019
0,08 - 0,12 0,14 - 0,23 0,17 - 0,29 0,22 - 0,37 0,26 - 0,44 0,29 - 0,49
.003 - .005 .006 - .009 .007 - .011 .009 - .015 .010 - .017 .011 - .014
0,08 - 0,12 0,14 - 0,23 0,17 - 0,29 0,22 - 0,37 0,26 - 0,44 0,29 - 0,49
.003 - .005 .006 - .009 .007 - .011 .009 - .015 .010 - .017 .011 - .014
0,08 - 0,12 0,13 - 0,22 0,16 - 0,27 0,21 - 0,35 0,25 - 0,41 0,28 - 0,46
.003 - .005 .005 - .009 .006 - .011 .008 - .014 .010 - .016 .011 - .018
0,08 - 0,12 0,12 - 0,20 0,15 - 0,25 0,19 - 0,32 0,23 - 0,38 0,25 - 0,42
.003 - .005 .005 - .008 .006 - .010 .007 - .013 .009 - .015 .010 - .017
0,08 - 0,12 0,12 - 0,19 0,14 - 0,23 0,18 - 0,30 0,21 - 0,35 0,24 - 0,39
.003 - .005 .005 - .007 .006 - .009 .007 - .012 .008 - .014 .009 - .015
0,08 - 0,12 0,11 - 0,19 0,14 - 0,23 0,18 - 0,30 0,21 - 0,35 0,24 - 0,39
.003 - .005 .004 - .007 .006 - .009 .007 - .012 .008 - .014 .009 - 0.02
0,05 - 0,10 0,10 - 0,16 0,12 - 0,20 0,16 - 0,26 0,18 - 0,31 0,21 - 0,34
.002 - .004 .004 - .006 .005 - .008 .006 - .010 .007 - .012 .008 - .013
0,05 - 0,10 0,10 - 0,16 0,12 - 0,20 0,16 - 0,26 0,18 - 0,31 0,21 - 0,34
.002 - .004 .004 - .006 .005 - .008 .006 - .010 .007 - .012 .008 - .013
0,05 - 0,10 0,05 - 0,10 0,05 - 0,13 0,10 - 0,20 0,13 - 0,23 0,15 - 0,25
.002 - .004 .002 - .004 .002 - .005 .004 - .008 .005 - .009 .006 - .010
0,03 - 0,08 0,05 - 0,10 0,05 - 0,13 0,10 - 0,20 0,13 - 0,23 0,15 - 0,25
.001 - .003 .002 - .004 .002 - .005 .004 - .008 .005 - .009 .006 - .010
0,03 - 0,08 0,08 - 0,18 0,10 - 0,20 0,13 - 0,23 0,15 - 0,25 0,18 - 0,28
.001 - .003 .003 - .007 .004 - .008 .005 - .009 .006 - .010 .007 - .011
0,03 - 0,08 0,08 - 0,18 0,10 - 0,20 0,13 - 0,23 0,15 - 0,25 0,18 - 0,28
.001 - .003 .003 - .007 .004 - .008 .005 - .009 .006 - .010 .007 - .011
0,03 - 0,08 0,05 - 0,10 0,05 - 0,10 0,10 - 0,15 0,13 - 0,18 0,15 - 0,20
.001 - .003 .002 - .004 .002 - .004 .004 - .006 .005 - .007 .006 - .008
0,03 - 0,08 0,05 - 0,10 0,05 - 0,10 0,10 - 0,15 0,13 - 0,18 0,15 - 0,20
.001 - .003 .002 - .004 .002 - .004 .004 - .006 .005 - .007 .006 - .008
0,05 - 0,10 0,05 - 0,10 0,05 - 0,10 0,10 - 0,15 0,13 - 0,18 0,15 - 0,20
.002 - .004 .002 - .004 .002 - .004 .004 - .006 .005 - .007 .006 - .008
0,03 - 0,08 0,05 - 0,10 0,05- 0,10 0,10 - 0,15 0,13 - 0,18 0,15 - 0,20
.001 - .003 .002 - .004 .002 - .004 .004 - .006 .005 - .007 .006 - .008
0,05 - 0,10 0,08 - 0,13 0,08 - 0,13 0,08 - 0,13 0,10 - 0,15 0,10 - 0,15
.002 - .004 .003 - .005 .003 - .005 .003 - .005 .004 - .006 .004 - .006
0,05 - 0,10 0,08 - 0,13 0,08 - 0,13 0,08 - 0,13 0,10 - 0,15 0,10 - 0,15
.002 - .004 .003 - .005 .003 - .005 .003 - .005 .004 - .006 .004 - .006
SOLID CARBIDE DRILLING
MODULAR DRILLING
HOLEMAKING
INDEXABLE DRILLING
HSK MODBORE
ROMICRON
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A9

SOLID CARBIDE DRILLING
SE DRILLS – B254HPC/B255HPC & B256HPC
NEW
Diameter Expansion!
A
Shank
135° D1
D
Tolerances
MODULAR DRILLING
L5
L4
L3
L
LS
D1 Tolerance m7 D Tolerance h6
>3 to 6 0,004 /0,016 6 .0000/-.0008
>6 to 10 0,006/0,021 8 to 10 .0000/-.0009
>10 to 18 0,007 /0,025 12 to 18 .0000/-.0011
>18 to 20 0,008 /0,029 20 .0000/-.0013
D1
L4
mm inch Catalog number D L L3 max. LS L5
3,50 .1378 B254A03500HPC 6 62 24 18 36 0,65
KC7315
INDEXABLE DRILLING
HOLEMAKING
3,00 .1181 B255A03000HPC 6 66 28 23 36 0,55
3,30 .1299 B255A03300HPC 6 66 28 23 36 0,61
3,40 .1340 B255A03400HPC 6 66 28 23 36 0,63
3,50 .1378 B255A03500HPC 6 66 28 23 36 0,65
3,70 .1457 B255A03700HPC 6 66 28 23 36 0,68
3,80 .1496 B255A03800HPC 6 66 28 23 36 0,7
8,20 .3228 B255A08200HPC 10 103 61 49 40 1,51
20,50 .8071 B255A20500HPC 20 167 115 85 50 3,78
3,00 .1181 B256A03000HPC 6 78 40 33 36 0,55
3,50 .1378 B256A03500HPC 6 78 40 33 36 0,65
5,90 .2322 B256A05900HPC 6 94 56 48 36 1,09
8,20 .3228 B256A08200HPC 10 122 80 68 40 1,51
HSK MODBORE
Cutting Data Recommendations
ROMICRON
Cutting Groups
15
16
17
18
19
20
Material
Group
Gray Cast Iron
Cast Iron with
Nodular Cast
Iron
Malleable
Cast Iron
Composition /Structure
Pearlitic/Ferritic
Pearlitic (Martensitic)
Ferritic
Pearlitic
Ferritic
Pearlitic
Austempered Ductile Iron
Compacted Graphite Iron
Tensile Strength
RM (Mpa)
Hardness HB
180
260
160
250
130
230
300
300
Cutting
Speed vc:
(m/min)
(sfm)
180 - 230
590 - 750
160 - 200
520 - 660
160 - 200
520 - 660
100 - 140
330 - 460
160 - 200
520 - 660
140 - 170
460 - 560
80 - 100
250 - 325
140 - 170
450 - 550
D =
3 mm
.1181"
D =
4 mm
.1575"
Feed Rate Per Revolution by Drill Diameter:
(mm/rev)
(ipr)
D =
6 mm
.2362"
D =
8 mm
.3150"
D =
10 mm
.3937"
D =
12 mm
.4724"
D =
16 mm
.6299
D =
20 mm
.7843
0,10 - 0,18 0,13 - 0,22 0,16 - 0,27 0,19 - 0,32 0,22 - 0,36 0,26 - 0,43 0,33 - 0,55 0,40 - 0,70
.004 - .007 .005 - .009 .006 - .011 .007 - .013 .009 - .014 .010 - .017 .013 - .022 .016 - .028
0,09 - 0,14 0,11 - 0,18 0,13 - 0,21 0,15 - 0,26 0,18 - 0,33 0,21 - 0,36 0,29 - 0,48 0,38 - 0,68
.003 - .006 .004 - .007 .005 - .008 .006 - .010 .007 - .013 .008 - .014 .011 - .019 .015 - .027
0,09 - 0,15 0,11 - 0,19 0,13 - 0,22 0,15 - 0,26 0,18 - 0,30 0,21 - 0,35 0,27 - 0,45 0,38 - 0,64
.003 - .006 .004 - .007 .005 - .009 .006 - .010 .007 - .012 .008 - .014 .011 - .018 .015 - .025
0,06 - 0,11 0,08 - 0,14 0,09 - 0,16 0,11 - 0,19 0,13 - 0,22 0,15 - 0,26 0,21 - 0,36 0,33 - 0,55
.003 - .004 .003 - .006 .004 - .006 .004 - .007 .005 - .009 .006 - .010 .008 - .014 .013 - .022
0,10 - 0,18 0,13 - 0,22 0,16 - 0,27 0,19 - 0,32 0,22 - 0,36 0,26 - 0,43 0,33 - 0,55 0,40 - 0,70
.004 - .007 .005 - .009 .006 - .011 .007 - .013 .009 - .014 .010 - .017 .013 - .022 .016 - .028
0,06 - 0,11 0,08 - 0,14 0,09 - 0,16 0,11 - 0,19 0,13 - 0,22 0,15 - 0,26 0,21 - 0,36 0,33 - 0,55
.003 - .004 .003 - 0.01 .004 - .006 .004 - .007 .005 - .009 .006 - .010 .008 - .014 .013 - .022
0,09 - 0,15 0,11 - 0,19 0,13 - 0,22 0,15 - 0,26 0,18 - 0,30 0,21 - 0,35 0,27 - 0,45 0,38 - 0,64
.003 - .006 .004 - .007 .005 - .009 .006 - .010 .007 - .012 .008 - .014 .011 - .018 .015 - .025
0,09 - 0,15 0,11 - 0,19 0,13 - 0,22 0,15 - 0,26 0,18 - 0,30 0,21 - 0,35 0,27 - 0,45 0,38 - 0,64
.003 - .006 .004 - .007 .005 - .009 .006 - .010 .007 - .012 .008 - .014 .011 - .018 .015 - .025
Order example:
(Ø 3,5 mm, straight shank without clamping
surface, TiAIN coated carbide)
Type Ø Cutting material
B254 A 03500HPC KC7315
Shank design
A10
To place an order, contact your Kennametal representative or visit www.kennametal.com.

®
FOR
®
AUTOMOTIVE
Kennametal enables leading vehicle
manufacturers to reduce cost per
part. Every day, in 60 countries
worldwide – we deliver customized
tooling innovations and processoptimization
services to meet tough
productivity targets.
Engine Block
Brake Disc
The new “Automotive“ CD:
Please ask your Kennametal
representative.
(Order no.: A04-44)
Transmission Housing
Additional information:
Visit us online at
www.kennametal.com
or ask your Kennametal representative!
A11

SOLID CARBIDE DRILLING
High-Performance BF Solid Carbide Drills
- Through-Coolant Drills
NEW
D1
L
D1
135°
D
MODULAR DRILLING
L5
L5
L7
INDEXABLE DRILLING
HOLEMAKING
HSK MODBORE
ROMICRON
mm
D1
inch
ISO
Catalog number
ANSI
Catalog number
D
(mm)
L
Adjustment Range
3,40 .1339 B343S03400HPG K343S01339HPG 4 55 1,0 10,0 0,63
3,50 .1378 B343S03500HPG K343S01378HPG 4 55 1,6 10,6 0,65
3,80 .1495 B343S03797HPG K343S01495HPG 4 55 3,3 12,2 0,70
3,80 .1496 B343S03800HPG K343S01496HPG 4 55 3,3 12,3 0,70
3,97 .1563 B343S03970HPG K343S01563HPG 4 55 4,3 13,3 0,73
4,00 .1575 B343S04000HPG K343S01575HPG 4 55 4,4 13,4 0,74
4,10 .1614 B343S04100HPG K343S01614HPG 5 62 3,7 13,7 0,08
4,20 .1654 B343S04200HPG K343S01654HPG 5 62 4,2 14,2 0,78
4,30 .1693 B343S04300HPG K343S01693HPG 5 62 4,7 14,7 0,79
4,50 .1772 B343S04500HPG K343S01772HPG 5 62 5,6 15,6 0,83
4,60 .1811 B343S04600HPG K343S01811HPG 5 62 5,8 15,8 0,83
4,62 .1820 B343S04623HPG K343S01820HPG 5 62 5,9 15,9 0,85
4,76 .1875 B343S04763HPG K343S01875HPG 5 62 6,6 16,6 0,88
4,90 .1929 B343S04900HPG K343S01929HPG 5 62 7,2 17,2 0,90
5,00 .1969 B343S05000HPG K343S01969HPG 5 62 7,6 17,6 0,92
5,10 .2008 B343S05100HPG K343S02008HPG 6 66 6,8 17,8 0,94
5,20 .2047 B343S05200HPG K343S02047HPG 6 66 7,2 18,2 0,96
5,30 .2087 B343S05300HPG K343S02087HPG 6 66 7,6 18,6 0,98
5,40 .2126 B343S05400HPG K343S02126HPG 6 66 8,0 19,0 1,00
5,41 .2130 B343S05410HPG K343S02130HPG 6 66 8,0 19,0 1,00
5,50 .2165 B343S05500HPG K343S02165HPG 6 66 8,4 19,4 1,02
5,55 .2185 B343S05550HPG K343S02185HPG 6 66 8,3 19,3 1,02
5,56 .2188 B343S05558HPG K343S02188HPG 6 66 8,3 19,3 1,02
5,60 .2205 B343S05600HPG K343S02205HPG 6 66 8,5 19,5 1,03
5,80 .2283 B343S05800HPG K343S02283HPG 6 66 9,3 20,3 1,07
6,00 .2362 B343S06000HPG K343S02362HPG 6 66 10,0 21,0 1,11
6,10 .2402 B343S06100HPG K343S02402HPG 7 74 9,1 21,1 1,13
6,20 .2441 B343S06200HPG K343S02441HPG 7 74 9,5 21,5 1,15
6,30 .2480 B343S06300HPG K343S02480HPG 7 74 9,8 21,8 1,16
6,35 .2500 B343S06350HPG K343S02500HPG 7 74 10,0 21,9 1,17
6,40 .2520 B343S06400HPG K343S02520HPG 7 74 10,2 22,2 1,18
6,50 .2559 B343S06500HPG K343S02559HPG 7 74 10,5 22,5 1,20
6,53 .2570 B343S06528HPG K343S02570HPG 7 74 10,6 22,6 1,20
6,60 .2598 B343S06600HPG K343S02598HPG 7 74 10,9 22,9 1,22
6,70 .2638 B343S06700HPG K343S02638HPG 7 74 11,2 23,2 1,24
6,75 .2656 B343S06746HPG K343S02656HPG 7 74 11,4 23,3 1,25
6,80 .2677 B343S06800HPG K343S02677HPG 7 74 11,5 23,5 1,26
6,90 .2717 B343S06900HPG K343S02717HPG 7 74 11,9 23,9 1,27
6,10 .2720 B343S06909HPG K343S02720HPG 7 74 11,9 23,9 1,28
7,00 .2756 B343S07000HPG K343S02756HPG 7 74 12,2 24,2 1,29
7,15 .2813 B343S07145HPG K343S02813HPG 8 79 11,1 24,1 1,32
7,30 .2874 B343S07300HPG K343S02874HPG 8 79 11,6 24,6 1,35
7,40 .2913 B343S07400HPG K343S02913HPG 8 79 11,9 24,9 1,37
7,50 .2953 B343S07500HPG K343S02953HPG 8 79 12,3 25,3 1,39
7,54 .2969 B343S07541HPG K343S02969HPG 8 79 12,4 25,4 1,39
7,70 .3031 B343S07700HPG K343S03031HPG 8 79 12,9 25,9 1,42
7,80 .3071 B343S07800HPG K343S03071HPG 8 79 13,2 26,2 1,44
7,90 .3110 B343S07900HPG K343S03110HPG 8 79 13,5 26,5 1,46
7,94 .3125 B343S07938HPG K343S03125HPG 8 79 13,6 26,6 1,47
8,00 .3150 B343S08000HPG K343S03150HPG 8 79 13,8 26,8 1,48
8,10 .3189 B343S08100HPG K343S03189HPG 9 84 12,6 26,6 1,50
8,20 .3228 B343S08200HPG K343S03228HPG 9 84 12,8 26,8 1,51
8,30 .3268 B343S08300HPG K343S03268HPG 9 84 13,1 27,1 1,53
8,33 .3281 B343S08334HPG K343S03281HPG 9 84 13,2 27,2 1,54
8,40 .3307 B343S08400HPG K343S03307HPG 9 84 13,4 27,4 1,55
8,43 .3320 B343S08433HPG K343S03320HPG 9 84 13,5 27,5 1,56
8,50 .3346 B343S08500HPG K343S03346HPG 9 84 13,7 27,7 1,57
8,60 .3386 B343S08600HPG K343S03386HPG 9 84 14,0 28,0 1,59
8,70 .3425 B343S08700HPG K343S03425HPG 9 84 14,3 28,3 1,61
8,73 .3438 B343S08733HPG K343S03438HPG 9 84 14,4 28,4 1,61
Continued on page A13.
L7
min.
L7
max.
L5
KC7315
Order example:
ISO Catalog number:
ANSI Catalog number:
Insert grade:
A12
B343S03175HPG
K343S01250HPG
KC7315
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Continued from page A12.
High-Performance BF Solid Carbide Drills
Through-Coolant Drills
NEW
SOLID CARBIDE DRILLING
D1
L
D1
135°
D
L5
L5
L7
MODULAR DRILLING
mm
D1
inch
ISO
Catalog number
ANSI
Catalog number
D
(mm)
L
Adjustment Range
8,80 .3465 B343S08800HPG K343S03465HPG 9 84 14,5 28,5 1,63
8,90 .3504 B343S08900HPG K343S03504HPG 9 84 14,8 28,8 1,64
9,00 .3543 B343S09000HPG K343S03543HPG 9 84 15,1 29,1 1,66
9,10 .3583 B343S09100HPG K343S03583HPG 10 89 14,3 28,8 1,68
9,13 .3594 B343S09129HPG K343S03594HPG 10 89 14,4 28,9 1,69
9,35 .3680 B343S09347HPG K343S03680HPG 10 89 15,0 29,5 1,73
9,40 .3701 B343S09400HPG K343S03701HPG 10 89 15,1 29,6 1,74
9,50 .3740 B343S09500HPG K343S03740HPG 10 89 15,4 29,9 1,76
9,53 .3750 B343S09525HPG K343S03750HPG 10 89 15,4 29,0 1,76
9,60 .3780 B343S09600HPG K343S03780HPG 10 89 15,6 29,9 1,77
9,70 .3819 B343S09700HPG K343S03819HPG 10 89 15,9 30,4 1,79
9,80 .3858 B343S09800HPG K343S03858HPG 10 89 16,2 30,7 1,81
9,92 .3906 B343S09921HPG K343S03906HPG 10 89 16,5 30,9 1,83
10,00 .3937 B343S10000HPG K343S03937HPG 10 89 16,7 31,2 1,85
10,10 .3976 B343S10100HPG K343S03976HPG 11 95 15,9 30,9 1,86
10,20 .4016 B343S10200HPG K343S04016HPG 11 95 16,2 31,2 1,89
10,30 .4055 B343S10300HPG K343S04055HPG 11 95 16,4 31,4 1,90
10,32 .4063 B343S10320HPG K343S04063HPG 11 95 16,5 31,5 1,90
10,40 .4094 B343S10400HPG K343S04094HPG 11 95 16,7 31,7 1,92
10,50 .4134 B343S10500HPG K343S04134HPG 11 95 16,9 31,9 1,94
10,60 .4173 B343S10600HPG K343S04173HPG 11 95 17,2 32,2 1,96
10,70 .4213 B343S10700HPG K343S04213HPG 11 95 17,4 32,4 1,98
10,71 .4217 B343S10710HPG K343S04219HPG 11 95 17,5 32,5 1,98
10,80 .4252 B343S10800HPG K343S04252HPG 11 95 17,7 32,7 2,00
11,00 .4331 B343S11000HPG K343S04331HPG 11 95 18,1 33,1 2,03
11,10 .4370 B343S11100HPG K343S04370HPG 12 102 17,4 32,9 2,05
11,11 .4374 B343S11110HPG K343S04375HPG 12 102 17,4 32,9 2,05
11,20 .4409 B343S11200HPG K343S04409HPG 12 102 17,6 33,1 2,07
11,30 .4449 B343S11300HPG K343S04449HPG 12 102 17,9 33,4 2,09
11,50 .4528 B343S11500HPG K343S04528HPG 12 102 18,3 33,8 2,13
11,51 .4531 B343S11508HPG K343S04531HPG 12 102 18,3 33,8 2,12
11,70 .4606 B343S11700HPG K343S04606HPG 12 102 18,8 34,3 2,12
11,80 .4646 B343S11800HPG K343S04646HPG 12 102 19,0 34,5 2,18
11,90 .4685 B343S11900HPG K343S04688HPG 12 102 19,3 34,7 2,20
12,00 .4724 B343S12000HPG K343S04724HPG 12 102 19,5 35,0 2,22
12,20 .4803 B343S12200HPG K343S04803HPG 13 102 18,9 34,9 2,25
12,30 .4843 B343S12300HPG K343S04844HPG 13 102 19,2 35,2 2,27
12,50 .4921 B343S12500HPG K343S04921HPG 13 102 19,6 35,6 2,31
12,70 .5000 B343S12700HPG K343S05000HPG 13 102 20,0 30,0 2,34
12,80 .5039 B343S12800HPG K343S05039HPG 13 102 20,3 36,3 2,37
13,00 .5118 B343S13000HPG K343S05118HPG 13 102 20,7 36,7 2,40
13,10 .5156 B343S13096HPG K343S05156HPG 14 107 20,1 36,7 2,42
13,10 .5157 B343S13100HPG K343S05157HPG 14 107 20,2 36,7 2,42
13,20 .5197 B343S13200HPG K343S05197HPG 14 107 20,4 36,9 2,44
13,50 .5315 B343S13500HPG K343S05315HPG 14 107 21,1 37,6 2,49
14,00 .5512 B343S14000HPG K343S05512HPG 14 107 22,1 38,6 2,58
14,10 .5551 B343S14100HPG K343S05551HPG 15 107 21,3 38,3 2,60
14,2 .5591 B343S14200HPG K343S05591HPG 15 107 21,5 38,5 2,62
14,28 .5622 B343S14280HPG K343S05625HPG 15 107 21,7 38,7 2,62
15,00 .5906 B343S15000HPG K343S05906HPG 15 107 23,2 40,2 2,77
15,50 .6102 B343S15500HPG K343S06102HPG 16 115 23,2 40,7 2,86
15,87 .6248 B343S15870HPG K343S06250HPG 16 115 24,0 41,5 2,93
16,00 .6299 B343S16000HPG K343S06299HPG 16 115 24,2 41,7 2,96
16,50 .6496 B343S16500HPG K343S06496HPG 17 115 24,2 42,2 3,05
16,67 .6563 B343S16670HPG K343S06562HPG 17 115 24,5 42,4 3,08
17,00 .6693 B343S17000HPG K343S06693HPG 17 115 25,1 43,1 3,14
17,46 .6874 B343S17460HPG K343S06875HPG 18 117 24,9 43,5 3,22
17,50 .6890 B343S17500HPG K343S06890HPG 18 117 25,1 43,6 3,23
17,70 .6969 B343S17700HPG K343S06969HPG 18 117 25,0 44,0 3,27
18,00 .7087 B343S18000HPG K343S07087HPG 18 117 26,0 44,5 3,32
L7
min.
L7
max.
L5
KC7315
HOLEMAKING
ROMICRON
HSK MODBORE
INDEXABLE DRILLING
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A13

SOLID CARBIDE DRILLING
BF Drill Bodies
Round Shank – Metric DIN 1835 Form A
D1
D4
D2
D
MODULAR DRILLING
metric
D3
45°
L
LS
See page A17.
INDEXABLE DRILLING
HOLEMAKING
HSK MODBORE
D1
Order number
Catalog number
BF Basic Body
*NOTE: Dimensions are factored with a 45° insert positioned in insert pocket.
D4 D
D2* D3 L LS Insert
3,40 - 4,00 1245716 3.37042R320 4 20 9,0 14,9 85 50 3.41020R901
4,10 - 4,50 1245718 3.37051R320 5 20 9,5 15,4 85 50 3.41020R901
4,60 - 5,00 1191046 3.37052R320 5 20 10,0 15,9 85 50 3.41020R901
5,10 - 5,50 1191048 3.37061R320 6 20 10,5 16,4 85 50 3.41020R901
5,55 - 6,00 1245720 3.37062R320 6 20 11,0 16,9 85 50 3.41020R901
6,10 - 7,00 1191050 3.37071R320 7 20 11,5 17,4 95 50 3.41020R901
7,30 - 8,00 1245722 3.37081R320 8 20 12,6 18,4 95 50 3.41020R901
8,10 - 9,00 1191052 3.37091R320 9 20 13,6 19,4 95 50 3.41020R901
9,10 - 10,00 1245724 3.37101R332 10 32 14,7 27,9 115 60 3.41220R901
10,10 - 11,00 1191056 3.37111R332 11 32 15,7 28,9 115 60 3.41220R901
11,10 - 12,00 1245725 3.37121R332 12 32 16,7 29,9 125 60 3.41220R901
12,20 - 13,00 1191060 3.37131R332 13 32 17,7 31,0 125 60 3.41220R901
13,10 - 14,00 1245727 3.37141R332 14 32 18,2 31,5 125 60 3.41220R901
14,10 - 15,00 1191063 3.37151R332 15 32 19,3 32,5 125 60 3.41220R901
15,50 - 16,00 1245729 3.37161R332 16 32 20,3 33,5 125 60 3.41220R901
16,50 - 17,00 1245731 3.37171R332 17 32 21,3 34,5 125 60 3.41220R901
17,50 - 18,00 1245733 3.37181R332 18 32 22,3 35,5 125 60 3.41220R901
Custom Solutions Available
Countersinking for countersunk
head screws
Tapped hole with protection countersinking
ROMICRON
Countersinking for round sealing rings
Countersinking for aluminum rim
Ordering information
• Drill body shipped with all screws and wrenches.
• Order the inserts and drills separately.
• Drills up to and including 9 mm shanks use only one insert.
• Some metric drills may be used in inch bodies.
Contact your Kennametal representative.
A14
To place an order, contact your Kennametal representative or visit www.kennametal.com.

BF Drill Bodies
2° Whistle Notch Shank – Metric
SOLID CARBIDE DRILLING
D4
D1
D2
D
metric
D3
45°
L
LS
See page A17.
MODULAR DRILLING
Order number
Catalog number
BF basic body
*NOTE: Dimensions are factored with a 45° insert positioned in insert pocket.
D4 D
D2* D3 L LS Insert
3,40 - 4,00 1245717 3.37042R820 4 20 9,0 14,9 85 50 3.41020R901
4,10 - 4,50 1245719 3.37051R820 5 20 9,5 15,4 85 50 3.41020R901
4,60 - 5,00 1191047 3.37052R820 5 20 10,0 15,9 85 50 3.41020R901
5,10 - 5,50 1191049 3.37061R820 6 20 10,5 16,4 85 50 3.41020R901
5,55 - 6,00 1245721 3.37062R820 6 20 11,0 16,9 85 50 3.41020R901
6,10 - 7,00 1191051 3.37071R820 7 20 11,5 17,4 95 50 3.41020R901
7,30 - 8,00 1245723 3.37081R820 8 20 12,6 18,4 95 50 3.41020R901
8,10 - 9,00 1191053 3.37091R820 9 20 13,6 19,4 95 50 3.41020R901
9,10 - 10,00 1191055 3.37101R832 10 32 14,7 27,9 115 60 3.41220R901
10,10 - 11,00 1191057 3.37111R832 11 32 15,7 28,9 115 60 3.41220R901
11,10 - 12,00 1191059 3.37121R832 12 32 16,7 29,9 125 60 3.41220R901
12,20 - 13,00 1245726 3.37131R832 13 32 17,7 31,0 125 60 3.41220R901
13,10 - 14,00 1191062 3.37141R832 14 32 18,2 31,5 125 60 3.41220R901
14,10 - 15,00 1245728 3.37151R832 15 32 19,3 32,5 125 60 3.41220R901
15,50 - 16,00 1245730 3.37161R832 16 32 20,3 33,5 125 60 3.41220R901
16,50 - 17,00 1245732 3.37171R832 17 32 21,3 34,5 125 60 3.41220R901
17,50 - 18,00 1245734 3.37181R832 18 32 22,3 35,5 125 60 3.41220R901
metric
D1
Spare Parts
Round Shank
Catalog number
BF Basic Body
Whistle Notch Shank
Catalog number
Adjusting
Screw
Drill
Clamp
Screw
Insert
Screw
Torx
Wrench
3.37042R320 3.37042R820 192.888 192.718 192.432 170.028 (T8)
3.37051R320 3.37051R820 192.888 192.718 192.432 170.028 (T8)
3.37052R320 3.37052R820 192.888 192.718 192.432 170.028 (T8)
3.37061R320 3.37061R820 192.888 192.718 192.432 170.028 (T8)
3.37062R320 3.37062R820 192.888 192.718 192.432 170.028 (T8)
3.37071R320 3.37071R820 192.888 192.718 192.432 170.028 (T8)
3.37081R320 3.37081R820 192.888 192.718 192.432 170.028 (T8)
3.37091R320 3.37091R820 192.888 192.718 192.432 170.028 (T8)
3.37101R332 3.37101R832 192.889 192.720 191.725 170.025 (T15)
3.37111R332 3.37111R832 192.889 192.720 191.725 170.025 (T15)
3.37121R332 3.37121R832 192.889 192.720 191.725 170.025 (T15)
3.37131R332 3.37131R832 192.889 192.720 191.725 170.025 (T15)
3.37141R332 3.37141R832 192.889 192.720 191.725 170.025 (T15)
3.37151R332 3.37151R832 192.889 192.720 191.725 170.025 (T15)
3.37161R332 3.37161R832 192.889 192.720 191.725 170.025 (T15)
3.37171R332 3.37171R832 192.889 192.720 191.725 170.025 (T15)
3.37181R332 3.37181R832 192.889 192.720 191.725 170.025 (T15)
HOLEMAKING
INDEXABLE DRILLING
HSK MODBORE
ROMICRON
Ordering information
• Drill body shipped with all screws and wrenches.
• Order the inserts and drills separately.
• Drills up to and including 9 mm shanks use only one insert.
• Some inch drills may be used in metric bodies. Contact your Kennametal representative.
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A15

SOLID CARBIDE DRILLING
BF Drill Bodies
Round Shank – Inch
D4
D1
D2
D
MODULAR DRILLING
inch
D3
45°
L
LS
See page A17
INDEXABLE DRILLING
HOLEMAKING
D1
Order number
Catalog number
BF basic body
D4
(mm) D
D2* D3 L LS Insert
.1250 - .1563 1246688 KBFI4 4 .750 .360 .585 3.34 1.97 3.41020R901
.1820 - .1875 1246691 KBFI5B 5 .750 .400 .624 3.34 1.97 3.41020R901
.2130 - .2188 1246696 KBFI6B 6 .750 .440 .664 3.34 1.97 3.41020R901
.2500 - .2656 1246700 KBFI7 7 .750 .460 .684 3.73 1.97 3.41020R901
.2813 - .3125 1246703 KBFI8 8 .750 .500 .724 3.74 1.97 3.41020R901
.3281 - .3438 1246704 KBFI9 9 1.000 .540 .764 4.21 2.20 3.41020R901
.3594 - .3906 1246707 KBFI10 10 1.000 .581 1.099 4.53 2.20 3.41220R901
.4063 - .4219 1246708 KBFI11 11 1.000 .620 1.138 4.53 2.20 3.41220R901
.4375 - .4688 1246710 KBFI12 12 1.000 .660 1.177 4.92 2.20 3.41220R901
.4844 - .5000 1246714 KBFI13 13 1.000 .699 1.221 4.91 2.20 3.41220R901
.5156 - .5512 1770928 KBFI14 14 1.250 .720 1.240 4.91 2.40 3.41220R901
.5551 - .5906 1246716 KBFI15 15 1.250 .759 1.280 4.91 2.36 3.41220R901
.6102 - .6299 1246718 KBFI16 16 1.250 .799 1.319 5.06 2.36 3.41220R901
.6496 - .6693 1770929 KBFI17 17 1.250 .839 1.358 4.91 2.40 3.41220R901
.6874 - .7087 1246720 KBFI18 18 1.250 .880 1.398 4.91 2.36 3.41220R901
*NOTE: Dimensions are factored with a 45° insert positioned in insert pocket.
HSK MODBORE
ROMICRON
inch
Spare Parts
BF Basic Body
Catalog number
Adjusting
Screw
Clamp
Screw
Insert
Screw
Torx
Wrench
KBFI4 192.888 192.718 192.432 170.028
KBFI5B 192.888 192.718 192.432 170.028
KBFI6B 192.888 192.718 192.432 170.028
KBFI7 192.888 192.718 192.432 170.028
KBFI8 192.888 192.718 192.432 170.028
KBFI9 192.889 192.718 192.432 170.028
KBFI10 192.889 192.720 191.725 170.025
KBFI11 192.889 192.720 191.725 170.025
KBFI12 192.889 192.720 191.725 170.025
KBFI13 192.889 192.720 191.725 170.025
KBFI14 192.889 192.720 191.725 170.025
KBFI15 192.889 192.720 191.725 170.025
KBFI16 192.889 192.720 191.725 170.025
KBFI17 192.889 192.720 191.725 170.025
KBFI18 192.889 192.720 191.725 170.025
KBFI20 192.889 192.720 191.725 170.025
Ordering information
• Drill body shipped with all screws and wrenches.
• Order the inserts and drills separately.
• Drills up to and including 9 mm shanks use only one insert.
• Some metric drills may be used in inch bodies.
Contact your Kennametal representative.
A16
To place an order, contact your Kennametal representative or visit www.kennametal.com.

41° chamfer 45° chamfer 45° full-length chamfer
Insert Grade
BF Inserts
NEW
60° chamfer
SOLID CARBIDE DRILLING
T
W1
41°
S
finish spotface
(uncoated)
T
W1
45°
S
finish spotface
(TiN coated)
W1
45°
S
*semi-finished
T
W1
60°
S
Catalog number
W1
S
W1
D1 mm
D1 inch
Insert Thickness
S
First Choice
Alternate Choice
Insert Width
W1
Chamfer Offset
T
Insert Description min. max. min. max. mm inch mm inch mm inch
KMF
KC7015
KC7315
3.41020R900 *semi-finished 3,40 9,0 .1250 .3438 3,00 .118 6,1 .240 - -
3.41020R901 45° chamfer 3,40 9,0 .1250 .3438 3,00 .118 6,1 .240 2,90 .114
3.41020R902 45° full-length chamfer 3,40 9,0 .1250 .3438 3,00 .118 6,1 .240 - -
3.41020R903 60° chamfer 3,40 9,0 .1250 .3438 3,00 .118 6,1 .240 2,90 .114
3.41020R904 41° chamfer 3,40 9,0 .1250 .3438 3,00 .118 6,1 .240 2,90 .114
3.41020R900SF finish spotface (uncoated) 3,40 9,0 .1250 .3438 3,00 .118 6,1 .240 - -
3.41020R900STF finish spotface (TiN coated) 3,40 9,0 .1250 .3438 3,00 .118 6,1 .240 - -
S
W1
S
H
S
N
K
M
P
MODULAR DRILLING
HOLEMAKING
INDEXABLE DRILLING
3.41220R900 *semi-finished >9,0 18,0 >.3438 .7500 3,50 .138 10,1 .398 - -
3.41220R901 45° chamfer >9,0 18,0 >.3438 .7500 3,50 .138 10,1 .398 3,05 .120
3.41220R902 45° full-length chamfer >9,0 18,0 >.3438 .7500 3,50 .138 10,1 .398 - -
3.41220R903 60° chamfer >9,0 18,0 >.3438 .7500 3,50 .138 10,1 .398 3,05 .120
3.41220R904 41° chamfer >9,0 18,0 >.3438 .7500 3,50 .138 10,1 .398 3,05 .120
3.41220R900SF finish spotface (uncoated) >9,0 18,0 >.3438 .7500 3,50 .138 10,1 .398 - -
3.41220R900STF finish spotface (TiN coated) >9,0 18,0 >.3438 .7500 3,50 .138 10,1 .398 - -
*Insert requires additional grinding at cutting face prior to machine use. All contact surfaces are ground.
ROMICRON
HSK MODBORE
Type Grade Designation Grade Description
PVD-coated
carbide
KC7315
HC-P25
PVD-TiAlN coated, universal fine-grain carbide
- Highest degree of wear resistance for highest cutting
speeds.
- Higher efficiency than PVD-TiN coated carbides.
- First choice for alloyed and high alloyed steels
- and cast iron materials.
Standard Designation
P
M
K
N
S
H
Wear Resistance
01
Application Range
Toughness
05 10 15 20 25 30 35 40 45 50
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A17

SOLID CARBIDE DRILLING
MODULAR DRILLING
1.1
1.2
2.1
2.2
3
4
5
6
7
8
9
BF Solid Carbide Drills
Cutting Data Recommendations
Cutting Groups
10
11
15
16
17
18
19
20
Material
Group
Unalloyed
Steel, Cast
Steel,
Machining
Steel
Low-Alloy
Steel,
Cast Steel,
Machining
Steel
High-Alloy
Steel, Cast
Steel, High-
Alloy Tool Steel
Gray Cast Iron
Cast Iron with
Nodular Cast
Iron
Malleable
Cast Iron
C = 0,10 - 0,25
Annealed, long-chipping
C = 0,10 - 0,25 Annealed, short-chipping
C = 0,25 - 0,55
Annealed, long-chipping
C = 0,25 - 0,55 Annealed, short-chipping
C = 0,25 - 0,55
C = 0,25 - 0,80
Composition /Structure
Tempered
Annealed
Tempered
Annealed
Tempered
Tempered
Tempered
Annealed
Hardened and Tempered
Pearlitic/Ferritic
Pearlitic (Martensitic)
Ferritic
Pearlitic
Ferritic
Pearlitic
Tensile Strength
RM (Mpa)
Hardness HB
420 125
420 125
640 190
640 190
850 250
915 270
1020 300
610 180
930 275
1020 300
1190 350
680 200
1100 325
180
260
160
250
130
230
Cutting
Speed vc:
(m/min)
(sfm)
D =
3 mm
.1181’’
Feed Rate Per Revolution by Drill Diameter:
(mm/rev)
(ipr)
D =
6 mm
.2362’’
D =
8 mm
.3150’’
D =
12 mm
.4724’’
D =
16 mm
.6299’’
D =
18 mm
.7087’’
140 - 168
462 - 553
154 - 182
504 - 595
126 - 154
413 - 504
140 - 168
0,07 - 0,12
.003 - .005
0,07 - 0,12
.003 - .005
0,08 - 0,13
.003 - .005
0,08 - 0,13
0,10 - 0,17
.004 - .007
0,10 - 0,17
.004 - .007
0,11 - 0,19
.004 - .007
0,11 - 0,19
0,13 - 0,21
.005 - .008
0,13 - 0,21
.005 - .008
0,14 - 0,23
.006 - .009
0,14 - 0,23
0,17 - 0,28
.007 - .011
0,17 - 0,28
.007 - .011
0,18 - 0,30
.007 - .012
0,18 - 0,30
0,19 - 0,32
.007 - .013
0,19 - 0,32
.007 - .013
0,21 - 0,35
.008 - .014
0,21 - 0,35
0,22 - 0,36
.009 - .014
0,22 - 0,36
.009 - .014
0,24 - 0,39
.009 - .015
0,24 - 0,39
462 - 553 . 003 - .005 .004 - .007 .006 - .009 .007 - .012 .008 - .014 .009 - .015
98 - 126
322 - 413
98 - 126
322 - 413
84 - 112
273 - 364
98 - 126
322 - 413
84 - 112
273 - 364
84 - 112
273 - 364
70 - 98
231 - 322
98 - 126
322 - 413
70 - 98
231 - 322
98 - 126
322 - 413
70 - 98
231 - 322
98 - 126
322 - 413
70 - 98
231 - 322
0,10 - 0,16
.004 - .006
0,10 - 0,16
.004 - .006
0,10 - 0,16
.004 - .006
0,09 - 0,16
.004 - .006
0,08 - 0,14
.003 - .006
0,08 - 0,13
.003 - .005
0,08 - 0,13
.003 - .005
0,07 - .12
.003 - .005
0,07 - 0,12
.003 - .005
0,10 - 0,17
.004 - .007
0,09 - 0,15
.004 - .006
0,09 - 0,15
.004 - .006
0,08 - 0,13
.003 - .005
0,14 - 0,23
.006 - .009
0,14 - 0,23
.006 - .009
0,14 - 0,23
.006 - .009
0,13 - 0,22
.005 - .009
0,11 - 0,20
.004 - .008
0,11 - 0,19
.004 - .007
0,11 - 0,19
.004 - .007
0,10 - 0,16
.004 - .006
0,10 - 0,16
.004 - .006
0,15 - 0,25
.006 - .010
0,13 - -0,22
.005 - .009
0,12 - 0,21
.005 - .008
0,11 - 0,18
.004 - .007
0,17 - 0,29
.007 - .011
0,17 - 0,29
.007 - .011
0,17 - 0,29
.007 - .011
0,16 - 0,27
.006 - .011
0,15 - 0,25
.006 - .010
0,14 - 0,23
.006 - .009
0,14 - 0,23
.006 - .009
0,12 - 0,20
.005 - .008
0,12 - 0,20
.005 - .008
0,18 - 0,31
.007 - .012
0,16 - 0,26
.006 - .010
0,15 - 0,26
.006 - .010
0,14 - 0,23
.006 - .009
0,22 - 0,37
.009 - .015
0,22 - 0,37
.009 - .015
0,22 - 0,37
.009 - .015
0,21 - 0,35
.008 - .014
0,19 - 0,32
.007 - .013
0,18 - 0,30
.007 - .012
0,18 - 0,30
.007 - .012
0,16 - 0,26
.006 - .010
0,16 - 0,26
.006 - .010
0,24 - 0,39
.009 - .015
0,20 - 0,34
.008 - .013
0,20 - 0,33
.008 - .013
0,17 - 0,29
.007 - .011
0,26 - 0,44
.010 - .017
0,26 - 0,44
.010 - .017
0,26 - 0,44
.010 - .017
0,25 - 0,41
.010 - .016
0,23 - 0,38
.009 - .015
0,21 - 0,35
.008 - .014
0,21 - 0,35
.008 - .014
0,18 - 0,31
.007 - .012
0,18 - 0,31
.007 - .012
0,28 - 0,46
.011 - .018
0,24 - 0,40
.009 - .016
0,23 - 0,39
.009 - .015
0,21 - 0,34
.008 - .013
0,29 - 0,49
.011 - .019
0,29 - 0,49
.011 - .014
0,29 - 0,49
.011 - .014
0,28 - 0,46
.011 - .018
0,25 - 0,42
.010 - .017
0,24 - 0,39
.009 - .015
0,24 - 0,39
.009 - .015
0,21 - 0,34
.008 - .013
0,21 - 0,34
.008 - .013
0,31 - 0,52
.012 - .020
0,27 - 0,45
.011 - .018
0,26 - 0,44
.010 - .017
0,23 - 0,38
.009 - .015
112 - 140 0,07 - 0,12 0,11 0,18 0,13 - 0,22 0,17 - 0,28 0,20 - 0,33 0,22 - 0,37
364 - 462
112 - 140
364 - 462
.003 - .005
0,08 - 0,13
.003 - .005
.004 - .007
0,11 - 0,19
.004 - .007
.005 - .009
0,14 - 0,23
.006 - .009
.007 - .011
0,18 - 0,30
.007 - .012
.008 - .013
0,21 - 0,35
.008 - .014
.009 - .015
0,23 - 0,39
.009 - .015
ROMICRON
INDEXABLE DRILLING
HOLEMAKING
HSK MODBORE
A18
To place an order, contact your Kennametal representative or visit www.kennametal.com.

®
FOR HEAVY
EQUIPMENT
®
Kennametal enables leading heavy
equipment manufacturers to reduce
cost per part. Every day, in 60
countries worldwide – we deliver
tooling innovations and processoptimization
services to meet tough
productivity targets.
Agricultural
Component
Additional information:
Visit us online at
www.kennametal.com
or ask your Kennametal representative!
A19

KenTIP SCF Shank Tools
New KenTIP shank features
ground flange and flat for
secure clamping in holders
and turning machine turrets!
Available in metric diameter
shanks only.
See page A22.
NEW
KenTIP 8xD Tool Bodies
Drill 8xD holes – with no
pre-centering needed!
Excellent centering enabled
by KenTIP HP insert design!
Available in inch and metric
diameter shanks.
See page A23.
NEW
HTS Exterior Cartridges with SPHX Insert
Greatly reduce risk of drill breakage with new
square insert design. Get better workpiece surface
finishes! Use standard components in existing
HTS heads for most cutting diameters!
See page A43.
NEW
A20

FOR MODULAR AND INDEXABLE DRILLS
...engineered specifically to boost your Holemaking
productivity and profitability!
KenTIP BF Tools
Slash cycle times and
improve hole quality with
interchangeable standard or
custom-designed inserts for
your application!
KSEM-HPG Geometry
See page A26.
NEW
Drill up to 7xD without
pre-centering – reduce
cycle times, achieve higher
cutting speeds!
KSEM-PCM inserts for 150°
pre-centering are redesigned
with new HP technology and
grade KC7135 for longer tool
life!
See page A34.
NEW
DRILL-FIX DFR 4xD Drills
Get the security and dependability
of Kennametal DFR indexable drills
in a 4xD cutting depth. Exceptional
performance at higher feed rates!
Available in metric diameter
whistle-notch shanks only.
See page A40.
NEW
A21

SOLID CARBIDE DRILLING
KenTIP 3xD and 5xD SCF Shank – Metric
NEW
SCF Shank Version!
3xD
5xD
L3
L4
L3
L4
MODULAR DRILLING
D1
L5
metric
L1
3xD SCF Shank
LS
D
D1
D
L5
See page A30. L1
LS
See page A30.
INDEXABLE DRILLING
HOLEMAKING
D1
Insert
mm
inch
Order Catalog number Seat
min. max. min. max. number 3xD Tool Body Size D
L1 L3 L4 L5
LS
Insert
Wrench
8,00 8,49 .3125 .3343 2405161 KTIP080R3SCF12M F 12 40,5 35 25,5 1,4 45 170.306
8,50 8,99 .3346 .3539 2405162 KTIP085R3SCF12M G 12 42,5 37 27,0 1,5 45 170.306
9,00 9,49 .3543 .3736 2405203 KTIP090R3SCF12M H 12 44,5 39 28,5 1,6 45 170.306
9,50 9,99 .3740 .3933 2405204 KTIP095R3SCF12M I 12 46,5 41 30,0 1,6 45 170.306
10,00 10,49 .3937 .4130 2405205 KTIP100R3SCF16M J 16 48,5 43 31,5 1,7 48 170.307
10,50 10,99 .4134 .4327 2405206 KTIP105R3SCF16M K 16 50,5 45 33,0 1,8 48 170.307
11,00 11,49 .4331 .4524 2405207 KTIP110R3SCF16M L 16 52,5 47 34,5 1,9 48 170.307
11,50 11,99 .4528 .4720 2405208 KTIP115R3SCF16M M 16 54,5 49 36,0 2,0 48 170.307
12,00 12,49 .4724 .4917 2405209 KTIP120R3SCF16M N 16 57,5 52 37,5 2,1 48 170.308
12,50 12,99 .4921 .5114 2405210 KTIP125R3SCF16M O 16 59,5 54 39,0 2,2 48 170.308
13,00 13,49 .5118 .5311 2405211 KTIP130R3SCF16M P 16 61,5 56 40,5 2,2 48 170.308
13,50 13,99 .5315 .5508 2405212 KTIP135R3SCF16M Q 16 63,5 58 42,0 2,3 48 170.308
14,00 14,49 .5512 .5705 2405213 KTIP140R3SCF16M R 16 65,5 60 43,5 2,4 48 170.309
14,50 14,99 .5709 .5902 2405214 KTIP145R3SCF16M S 16 67,5 62 45,0 2,5 48 170.309
15,00 15,99 .5906 .6295 2405215 KTIP150R3SCF20M T 20 71,5 66 48,0 2,6 50 170.309
16,00 16,99 .6299 .6689 2405216 KTIP160R3SCF20M U 20 75,5 70 51,0 2,8 50 170.309
HSK MODBORE
ROMICRON
metric
min.
mm
5xD SCF Shank
max.
D1
inch
min. max.
Order
number
Catalog number
5xD Tool Body
Insert
Seat
Size D L1 L3 L4 L5
LS
Insert
Wrench
8,00 8,49 .3125 .3343 2405248 KTIP080R5SCF12M F 12 58,5 53 42,5 1,4 45 170.306
8,50 8,99 .3346 .3539 2405249 KTIP085R5SCF12M G 12 61,5 56 45,0 1,5 45 170.306
9,00 9,49 .3543 .3736 2405250 KTIP090R5SCF12M H 12 64,5 59 47,5 1,6 45 170.306
9,50 9,99 .3740 .3933 2405251 KTIP095R5SCF12M I 12 68,5 63 50,0 1,6 45 170.306
10,00 10,49 .3937 .4130 2405252 KTIP100R5SCF16M J 16 71,5 66 52,5 1,7 48 170.307
10,50 10,99 .4134 .4327 2405273 KTIP105R5SCF16M K 16 74,5 69 55,0 1,8 48 170.307
11,00 11,49 .4331 .4524 2405274 KTIP110R5SCF16M L 16 77,5 72 57,5 1,9 48 170.307
11,50 11,99 .4528 .4720 2405275 KTIP115R5SCF16M M 16 80,5 75 60,0 2,0 48 170.307
12,00 12,49 .4724 .4917 2405276 KTIP120R5SCF16M N 16 83,5 78 62,5 2,1 48 170.308
12,50 12,99 .4921 .5114 2405277 KTIP125R5SCF16M O 16 86,5 81 65,0 2,2 48 170.308
13,00 13,49 .5118 .5311 2405278 KTIP130R5SCF16M P 16 89,5 84 67,5 2,2 48 170.308
13,50 13,99 .5315 .5508 2405279 KTIP135R5SCF16M Q 16 93,5 88 70,0 2,3 48 170.308
14,00 14,49 .5512 .5705 2405280 KTIP140R5SCF16M R 16 96,5 91 72,5 2,4 48 170.309
14,50 14,99 .5709 .5902 2405281 KTIP145R5SCF16M S 16 99,5 94 75,0 2,5 48 170.309
15,00 15,99 .5906 .6295 2405282 KTIP150R5SCF20M T 20 105,5 100 80,0 2,6 50 170.309
16,00 16,99 .6299 .6689 2405283 KTIP160R5SCF20M U 20 111,5 106 85,0 2,8 50 170.309
Order example:
(KenTIP tool body 3xD for drill diameters of 8,00 to 8,49 mm)
Type Ø Direction of cut
KTIP 080 R 3 SCF12M
Shank
relative drilling depth
or by order number: 1 x 2405161
Included:
Tool body with insert wrench
A22
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Round Shank
KenTIP 8xD Round and SCF Shank – Metric
SCF Shank
8xD Expansion
NEW
SOLID CARBIDE DRILLING
L3
L4
L3
L4
D1
L5
metric
8xD Round Shank
L
LS
D
D1
D
L5
See page A30. L1
LS See page A30.
MODULAR DRILLING
min.
mm
max.
D1
inch
min. max.
Order
number
Catalog number
8xD Tool Body
Insert
Seat
Size D L
L3 L4 L5
LS
Insert
Wrench
8,00 8,49 .3125 .3343 2548776 KTIP080R8SS10M F 10 122,5 78,5 68 1,4 41 170.306
8,50 8,99 .3346 .3539 2440526 KTIP085R8SS10M G 10 127,0 83,0 72 1,5 41 170.306
9,00 9,49 .3543 .3736 2548777 KTIP090R8SS10M H 10 131,5 87,5 76 1,6 41 170.306
9,50 9,99 .3740 .3933 2548778 KTIP095R8SS10M I 10 137,0 93,0 80 1,6 41 170.306
10,00 10,49 .3937 .4130 2548779 KTIP100R8SS12M J 12 146,5 97,5 84 1,7 46 170.307
10,50 10,99 .4134 .4327 2548780 KTIP105R8SS12M K 12 151,0 102,0 88 1,8 46 170.307
11,00 11,49 .4331 .4524 2548781 KTIP110R8SS12M L 12 155,5 106,5 92 1,9 46 170.307
11,50 11,99 .4528 .4720 2548782 KTIP115R8SS12M M 12 160,0 111,0 96 2,0 46 170.307
12,00 12,49 .4724 .4917 2548913 KTIP120R8SS14M N 14 164,5 115,5 100 2,1 46 170.308
12,50 12,99 .4921 .5114 2548914 KTIP125R8SS14M O 14 169,0 120,0 104 2,2 46 170.308
13,00 13,49 .5118 .5311 2548915 KTIP130R8SS14M P 14 173,5 124,5 108 2,2 46 170.308
13,50 13,99 .5315 .5508 2548916 KTIP135R8SS14M Q 14 179,0 130,0 112 2,3 46 170.308
14,00 14,49 .5512 .5705 2548917 KTIP140R8SS16M R 16 186,5 134,5 116 2,4 49 170.309
14,50 14,99 .5709 .5902 2548918 KTIP145R8SS16M S 16 191,0 139,0 120 2,5 49 170.309
15,00 15,99 .5906 .6295 2548919 KTIP150R8SS16M T 16 200,0 148,0 128 2,6 49 170.309
16,00 16,99 .6299 .6689 2440527 KTIP160R8SS18M U 18 209,0 157,0 136 2,8 49 170.309
HOLEMAKING
INDEXABLE DRILLING
metric
min.
mm
8xD SCF Shank
max.
D1
inch
min. max.
Order
number
Catalog number
8xD Tool Body
Insert
Seat
Size D L1 L3 L4 L5
LS
Insert
Wrench
8,00 8,49 .3125 .3343 2548920 KTIP080R8SCF12M F 12 84,0 78,5 68 1,4 45 170.306
8,50 8,99 .3346 .3539 2548921 KTIP085R8SCF12M G 12 88,5 83,0 72 1,5 45 170.306
9,00 9,49 .3543 .3736 2548922 KTIP090R8SCF12M H 12 93,0 87,5 76 1,6 45 170.306
9,50 9,99 .3740 .3933 2548923 KTIP095R8SCF12M I 12 98,5 93,0 80 1,6 45 170.306
10,00 10,49 .3937 .4130 2548924 KTIP100R8SCF16M J 16 103,0 97,5 84 1,7 48 170.307
10,50 10,99 .4134 .4327 2548925 KTIP105R8SCF16M K 16 107,5 102,0 88 1,8 48 170.307
11,00 11,49 .4331 .4524 2548926 KTIP110R8SCF16M L 16 112,0 106,5 92 1,9 48 170.307
11,50 11,99 .4528 .4720 2548927 KTIP115R8SCF16M M 16 116,5 111,0 96 2,0 48 170.307
12,00 12,49 .4724 .4917 2548928 KTIP120R8SCF16M N 16 121,0 115,5 100 2,1 48 170.308
12,50 12,99 .4921 .5114 2548929 KTIP125R8SCF16M O 16 125,5 120,0 104 2,2 48 170.308
13,00 13,49 .5118 .5311 2548930 KTIP130R8SCF16M P 16 130,0 124,5 108 2,2 48 170.308
13,50 13,99 .5315 .5508 2548931 KTIP135R8SCF16M Q 16 135,5 130,0 112 2,3 48 170.308
14,00 14,49 .5512 .5705 2548932 KTIP140R8SCF16M R 16 140,0 134,5 116 2,4 48 170.309
14,50 14,99 .5709 .5902 2548933 KTIP145R8SCF16M S 16 144,5 139,0 120 2,5 48 170.309
15,00 15,99 .5906 .6295 2548934 KTIP150R8SCF20M T 20 153,5 148,0 128 2,6 50 170.309
16,00 16,99 .6299 .6689 2548935 KTIP160R8SCF20M U 20 162,5 157,0 136 2,8 50 170.309
HSK MODBORE
ROMICRON
Order example:
(KenTIP tool body 8xD for drill diameters of 8,00 to 8,49 mm)
Type Ø Direction of cut
KTIP 080 R 8 SS10M
Shank
relative drilling depth
or by order number: 1 x 2548776
Included:
Tool body with insert wrench
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A23

SOLID CARBIDE DRILLING
KenTIP 8xD Round Shank – Inch
NEW
8xD
8xD Expansion
L3
L4
MODULAR DRILLING
inch
D1
L5
L
LS
D
See page A30
INDEXABLE DRILLING
HOLEMAKING
HSK MODBORE
D1
inch
mm
min. max. min. max.
Order
number
Catalog number
8xD Tool Body
Insert
Seat
Size D L L3 L4 L5
LS
Insert
Wrench
.3125 .3343 7,94 8,49 2542068 KTIP0313R8SS038 F .3750 4.88 3.10 2.67 .05 1.59 170.306
.3346 .3539 8,50 8,99 2542069 KTIP0335R8SS038 G .3750 5.13 3.36 2.83 .06 1.59 170.306
.3543 .3736 9,00 9,49 2542071 KTIP0354R8SS038 H .3750 5.25 3.47 2.99 .06 1.59 170.306
.3740 .3933 9,50 9,99 2542072 KTIP0374R8SS038 I .3750 5.38 3.60 3.15 .06 1.59 170.306
.3740 .3933 9,50 9,99 2542083 KTIP0374R8SS044 I .4375 5.38 3.52 3.15 .06 1.67 170.306
.3937 .4130 10,00 10,49 2542084 KTIP0394R8SS044 J .4375 5.75 3.89 3.31 .07 1.67 170.307
.4134 .4327 10,50 10,99 2542085 KTIP0413R8SS044 K .4375 6.00 4.14 3.46 .07 1.67 170.307
.4331 .4524 11,00 11,49 2542086 KTIP0433R8SS044 L .4375 6.25 4.38 3.62 .08 1.67 170.307
.4528 .4720 11,50 11,99 2542087 KTIP0453R8SS050 M .5000 6.50 4.52 3.78 .08 1.79 170.307
.4724 .4917 12,00 12,49 2443608 KTIP0472R8SS050 N .5000 6.75 4.76 3.94 .08 1.79 170.308
.4921 .5114 12,50 12,99 2542088 KTIP0492R8SS050 O .5000 7.00 5.02 4.10 .09 1.79 170.308
.4921 .5114 12,50 12,99 2542089 KTIP0492R8SS056 O .5625 7.00 5.02 4.10 .09 1.79 170.308
.5118 .5311 13,00 13,49 2542090 KTIP0512R8SS056 P .5625 7.13 5.13 4.26 .09 1.79 170.308
.5315 .5508 13,50 13,99 2542091 KTIP0532R8SS056 Q .5625 7.25 5.26 4.40 .09 1.79 170.308
.5512 .5705 14,00 14,49 2542092 KTIP0551R8SS056 R .5625 7.38 5.37 4.56 .10 1.79 170.309
.5709 .5902 14,50 14,99 2542093 KTIP0571R8SS063 S .6250 7.50 5.39 4.72 .10 1.91 170.309
.5906 .6295 15,00 15,99 2542094 KTIP0591R8SS063 T .6250 7.75 5.65 5.04 .10 1.91 170.309
.6299 .6689 16,00 16,99 2542095 KTIP0630R8SS069 U .6875 8.00 5.87 5.34 .11 1.91 170.309
ROMICRON
Order example:
(KenTIP tool body 8xD for drill diameters of .3125 to .3343 inch)
Type Ø Direction of cut
KTIP 0313 R 8 SS038
Shank
relative drilling depth
or by order number: 1 x 2542068
Included:
Tool body with insert wrench
A24
To place an order, contact your Kennametal representative or visit www.kennametal.com.

With chipbreaker and radial relief grinding
SEFAS Inserts for KenTIP Bodies
SOLID CARBIDE DRILLING
W1
45°
S
First Choice
Alternate Choice
H
S
N
K
M
P
MODULAR DRILLING
D1
Catalog number
W1
mm inch
S
mm inch
KMF
KC7015
KC73115

SOLID CARBIDE DRILLING
BF Drill Bodies – Metric and Inch
NEW
Straight Shank
Two Pockets Seats for Small Diameters
Whistle Notch Shank
2°
D3
D2 D1
D
D3
D2
D1
D
MODULAR DRILLING
metric
BF Basic Body
D4
L
LS
KenTIP
D4
L
LS
INDEXABLE DRILLING
HOLEMAKING
D1
mm mm
Straight Shank
Catalog number
Whistle Notch
D4
(mm)
BF
Tool Body D SEAT D2 D3 L LS
Insert
Catalog
number
7,94 8,00 3.37082R320 3.37081R320 1) 3.37082R820 3.37081R820 1) 8 KTIP…BF08M 20 F 12,6 18,4 95 50 3.41020R9..
7,94 9,00 3.37092R320 3.37091R320 1) 3.37092R820 3.37091R820 1) 9 KTIP…BF09M 20 F,G,H 13,6 19,4 95 50 3.41020R9..
9,00 10,00 3.37101R332 3.37101R832 10 KTIP…BF10M 32 H,I,J 14,7 27,9 115 60 3.41220R9..
10,00 11,00 3.37111R332 3.37111R832 11 KTIP…BF11M 32 J,K,L 15,7 28,9 115 60 3.41220R9..
11,00 12,00 3.37121R332 3.37121R832 12 KTIP…BF12M 32 L,M,N 16,7 29,9 125 60 3.41220R9..
12,00 13,00 3.37131R332 3.37131R832 13 KTIP…BF13M 32 N,O,P 17,7 31,0 125 60 3.41220R9..
13,00 14,00 3.37141R332 3.37141R832 14 KTIP…BF14M 32 P,Q,R 18,2 31,5 125 60 3.41220R9..
14,00 15,00 3.37151R332 3.37151R832 15 KTIP…BF15M 32 R,S,T 19,3 32,5 125 60 3.41220R9..
15,00 16,00 3.37161R332 3.37161R832 16 KTIP…BF16M 32 T,U 20,3 33,5 125 60 3.41220R9..
16,00 16,99 3.37171R332 3.37171R832 17 KTIP…BF17M 32 U 21,3 34,5 125 60 3.41220R9..
1) One BF-Insert pocket seat only.
inch
BF Basic Body
KenTIP
HSK MODBORE
D1
inch inch
Catalog number
Straight Shank
D4
(mm)
BF
Tool Body
D SEAT D2 D3 L LS
Insert
Catalog
number
.3125 .3150 KBFI8 1) 8 KTIP…BF08M .750 F .500 .724 3.74 1.97 3.41020R9..
.3125 .3543 KBFI9 1) 9 KTIP…BF09M 1.000 F,G,H .540 .764 4.21 2.20 3.41020R9..
.3543 .3937 KBFI10 10 KTIP…BF10M 1.000 H,I,J .581 1.099 4.53 2.20 3.41220R9..
.3937 .4331 KBFI11 11 KTIP…BF11M 1.000 J,K,L .620 1.138 4.53 2.20 3.41220R9..
.4331 .4724 KBFI12 12 KTIP…BF12M 1.000 L,M,N .660 1.177 4.72 2.20 3.41220R9..
.4724 .5118 KBFI13 13 KTIP…BF13M 1.000 N,O,P .699 1.221 4.91 2.20 3.41220R9..
.5118 .5512 KBFI14 14 KTIP…BF14M 1.250 P,Q,R .720 1.240 4.91 2.40 3.41220R9..
.5512 .5906 KBFI15 15 KTIP…BF15M 1.250 R,S,T .759 1.280 4.91 2.36 3.41220R9..
.5906 .6299 KBFI16 16 KTIP…BF16M 1.250 T,U .799 1.319 5.06 2.36 3.41220R9..
.6299 .6689 KBFI17 17 KTIP…BF17M 1.250 U .839 1.358 4.91 2.40 3.41220R9..
1) One BF-Insert pocket seat only.
ROMICRON
D1
mm
inch
min. max. min. max.
Spare parts for BF body
Adjusting
Screw
Clamping
Screw
Hex
Wrench
Clamping
Screw
Screw
Driver
8,00 8,99 .3125 .3539 192.888 192.718 170.003 192.432 170.028 8
9,00 16,99 .3543 .6689 192.889 192.720 170.005 191.725 170.025 15
Tx
Order example:
(BF Basic Body for drill diameters of 8,00 mm)
Type Ø
3.37 082 R 3 20
Shank
Included:
Tool body with assembly wrench
A26
To place an order, contact your Kennametal representative or visit www.kennametal.com.

3 x D
KenTIP 3xD BF Shank – Metric
Tool Body Version!
NEW
SOLID CARBIDE DRILLING
L5
D1
L7min
L7max
Drill
Diameter
D1
Insert
mm
inch
Catalog number Seat
Adjustment Range
min. max. min. max. 3xD Tool Body
Size
D
L
L5 L7 min. L7 max.
L
D
Insert
Wrench
8,00 .3125 .3343 KTIP080R3BF08M* F 8 80 1,6 11,5 25,5 170.314
8,00 8,49 .3125 .3343 KTIP080R3BF09M F 9 81 1,6 11,5 25,5 170.314
8,50 8,99 .3346 .3539 KTIP085R3BF09M G 9 82 1,7 12,5 27,0 170.314
9,00 .3543 .3736 KTIP090R3BF09M* H 9 82 1,8 13,5 28,5 170.314
9,00 9,49 .3543 .3736 KTIP090R3BF10M H 10 91 1,8 13,5 28,5 170.314
9,50 9,99 .3740 .3933 KTIP095R3BF10M I 10 92 1,9 15,0 30,0 170.314
10,00 .3937 .4130 KTIP100R3BF10M* J 10 93 2,0 16,0 31,5 170.314
10,00 10,49 .3937 .4130 KTIP100R3BF11M J 11 94 2,0 16,0 31,5 170.314
10,50 10,99 .4134 .4327 KTIP105R3BF11M K 11 94 2,1 17,0 33,0 170.314
11,00 .4331 .4524 KTIP110R3BF11M* L 11 96 2,2 18,5 34,5 170.314
11,00 11,49 .4331 .4524 KTIP110R3BF12M L 12 106 2,2 18,5 34,5 170.314
11,50 11,99 .4528 .4720 KTIP115R3BF12M M 12 107 2,3 19,5 36,0 170.314
12,00 .4724 .4917 KTIP120R3BF12M* N 12 108 2,4 20,5 37,5 170.314
12,00 12,49 .4724 .4917 KTIP120R3BF13M N 13 108 2,4 20,5 37,5 170.314
12,50 12,99 .4921 .5114 KTIP125R3BF13M O 13 110 2,5 22,0 39,0 170.314
13,00 .5118 .5311 KTIP130R3BF13M* P 13 111 2,6 23,0 40,5 170.314
13,00 13,49 .5118 .5311 KTIP130R3BF14M P 14 111 2,6 23,0 40,5 170.314
13,50 13,99 .5315 .5508 KTIP135R3BF14M Q 14 112 2,7 24,5 42,0 170.314
14,00 .5512 .5705 KTIP140R3BF14M* R 14 113 2,8 25,5 43,5 170.314
14,00 14,49 .5512 .5705 KTIP140R3BF15M R 15 118 2,8 25,5 43,5 170.314
14,50 14,99 .5709 .5902 KTIP145R3BF15M S 15 118 3,0 26,5 45,0 170.314
15,00 .5906 .6295 KTIP150R3BF15M* T 15 121 3,1 29,0 48,0 170.314
15,00 15,99 .5906 .6295 KTIP150R3BF16M T 16 121 3,1 29,0 48,0 170.314
16,00 .6299 .6689 KTIP160R3BF16M* U 16 123 3,3 31,5 51,0 170.314
16,00 16,99 .6299 .6689 KTIP160R3BF17M U 17 124 3,3 31,5 51,0 170.314
* Use for direct conversion of old solid carbide BF Drills, if needed. D1min equals shank diameter D.
See page A30
MODULAR DRILLING
HOLEMAKING
INDEXABLE DRILLING
HSK MODBORE
NEW
ROMICRON
Order example:
(KenTIP tool body 3xD for drill diameters of 8,00 mm)
Type Ø Direction of cut
KTIP 080 R 3 BF08M
Shank
relative drilling depth
Included:
Tool body with insert wrench
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A27

SOLID CARBIDE DRILLING
KenTIP 4xD and 5xD BF Shank – Metric
NEW
Tool Body Version!
4xD
5xD
See page A30
L5
L5
D1
D
D1
D
MODULAR DRILLING
metric
L7min
L7max
4xD BF Shank
L
L7min
L7max
L
INDEXABLE DRILLING
HOLEMAKING
mm
min. max.
D1
inch
min. max.
Catalog number
4xD Tool Body
Insert
Seat
Size
D
L
L5
Adjustment Range
L7 min. L7 max.
Insert
Wrench
8,00 8,49 .3125 .3343 KTIP080R4BF09M F 9 89,5 1,6 20,0 34,0 170.314
8,50 8,99 .3346 .3539 KTIP085R4BF09M G 9 91,0 1,7 21,5 36,0 170.314
9,00 9,49 .3543 .3736 KTIP090R4BF10M H 10 100,5 1,8 23,0 38,0 170.314
9,50 9,99 .3740 .3933 KTIP095R4BF10M I 10 102,0 1,9 25,0 40,0 170.314
10,00 10,49 .3937 .4130 KTIP100R4BF11M J 11 104,5 2,0 26,5 42,0 170.314
10,50 10,99 .4134 .4327 KTIP105R4BF11M K 11 105,0 2,1 28,0 44,0 170.314
11,00 11,49 .4331 .4524 KTIP110R4BF12M L 12 117,5 2,2 30,0 46,0 170.314
11,50 11,99 .4528 .4720 KTIP115R4BF12M M 12 119,0 2,3 31,5 48,0 170.314
12,00 12,49 .4724 .4917 KTIP120R4BF13M N 13 120,5 2,4 33,0 50,0 170.314
12,50 12,99 .4921 .5114 KTIP125R4BF13M O 13 123,0 2,5 35,0 52,0 170.314
13,00 13,49 .5118 .5311 KTIP130R4BF14M P 14 124,5 2,6 36,5 54,0 170.314
13,50 13,99 .5315 .5508 KTIP135R4BF14M Q 14 126,0 2,7 38,5 56,0 170.314
14,00 14,49 .5512 .5705 KTIP140R4BF15M R 15 132,5 2,8 40,0 58,0 170.314
14,50 14,99 .5709 .5902 KTIP145R4BF15M S 15 133,0 3,0 41,5 60,0 170.314
15,00 15,99 .5906 .6295 KTIP150R4BF16M T 16 137,0 3,1 45,0 64,0 170.314
16,00 16,99 .6299 .6689 KTIP160R4BF17M U 17 141,0 3,3 48,5 68,0 170.314
HSK MODBORE
ROMICRON
metric
mm
min. max.
5xD BF Shank
D1
inch
min. max.
Catalog number
5xD Tool Body
Insert
Seat
Size
D
L
L5
Adjustment Range
L7 min. L7 max.
Insert
Wrench
8,00 8,49 .3125 .3343 KTIP080R5BF09M F 9 98 1,6 28,5 42,5 170.314
8,50 8,99 .3346 .3539 KTIP085R5BF09M G 9 100 1,7 30,5 45,0 170.314
9,00 9,49 .3543 .3736 KTIP090R5BF10M H 10 110 1,8 32,5 47,5 170.314
9,50 9,99 .3740 .3933 KTIP095R5BF10M I 10 112 1,9 35,0 50,0 170.314
10,00 10,49 .3937 .4130 KTIP100R5BF11M J 11 115 2,0 37,0 52,5 170.314
10,50 10,99 .4134 .4327 KTIP105R5BF11M K 11 116 2,1 39,0 55,0 170.314
11,00 11,49 .4331 .4524 KTIP110R5BF12M L 12 129 2,2 41,5 57,5 170.314
11,50 11,99 .4528 .4720 KTIP115R5BF12M M 12 131 2,3 43,5 60,0 170.314
12,00 12,49 .4724 .4917 KTIP120R5BF13M N 13 133 2,4 45,5 62,5 170.314
12,50 12,99 .4921 .5114 KTIP125R5BF13M O 13 136 2,5 48,0 65,0 170.314
13,00 13,49 .5118 .5311 KTIP130R5BF14M P 14 138 2,6 50,0 67,5 170.314
13,50 13,99 .5315 .5508 KTIP135R5BF14M Q 14 140 2,7 52,5 70,0 170.314
14,00 14,49 .5512 .5705 KTIP140R5BF15M R 15 147 2,8 54,5 72,5 170.314
14,50 14,99 .5709 .5902 KTIP145R5BF15M S 15 148 3,0 56,5 75,0 170.314
15,00 15,99 .5906 .6295 KTIP150R5BF16M T 16 153 3,1 61,0 80,0 170.314
16,00 16,99 .6299 .6689 KTIP160R5BF17M U 17 158 3,3 65,5 85,0 170.314
Order example:
(KenTIP tool body 4xD for drill diameters of 8,00 to 8,49 mm)
Type Ø Direction of cut
KTIP 080 R 4 BF09M
Shank
relative drilling depth
Included:
Tool body with insert wrench
A28
To place an order, contact your Kennametal representative or visit www.kennametal.com.

41° chamfer 45° chamfer 45° full-length chamfer
Insert Grade!
BF Inserts
NEW
60° chamfer
SOLID CARBIDE DRILLING
T
W1
41°
S
finish spotface
(uncoated)
T
W1
45°
S
finish spotface
(TiN coated)
W1
45°
S
*semi-finished
T
W1
60°
S
Catalog number
W1
S
W1
D1 mm
D1 inch
Insert Thickness
S
First Choice
Alternate Choice
Insert Width
W1
Chamfer Offset
L
Insert Description min. max. min. max. mm inch mm inch mm inch
KMF
KC7015
KC7315
3.41020R900 *semi-finished 3,40 9,0 .1250 .3438 3,00 .118 6,1 .240 - -
3.41020R901 45° chamfer 3,40 9,0 .1250 .3438 3,00 .118 6,1 .240 2,90 .114
3.41020R902 45° full-length chamfer 3,40 9,0 .1250 .3438 3,00 .118 6,1 .240 - -
3.41020R903 60° chamfer 3,40 9,0 .1250 .3438 3,00 .118 6,1 .240 2,90 .114
3.41020R904 41° chamfer 3,40 9,0 .1250 .3438 3,00 .118 6,1 .240 2,90 .114
3.41020R900SF finish spotface (uncoated) 3,40 9,0 .1250 .3438 3,00 .118 6,1 .240 - -
3.41020R900STF finish spotface (TiN coated) 3,40 9,0 .1250 .3438 3,00 .118 6,1 .240 - -
S
W1
S
H
S
N
K
M
P
MODULAR DRILLING
HOLEMAKING
INDEXABLE DRILLING
3.41220R900 *semi-finished >9,0 18,0 >.3438 .7500 3,50 .138 10,1 .398 - -
3.41220R901 45° chamfer >9,0 18,0 >.3438 .7500 3,50 .138 10,1 .398 3,05 .120
3.41220R902 45° full-length chamfer >9,0 18,0 >.3438 .7500 3,50 .138 10,1 .398 - -
3.41220R903 60° chamfer >9,0 18,0 >.3438 .7500 3,50 .138 10,1 .398 3,05 .120
3.41220R904 41° chamfer >9,0 18,0 >.3438 .7500 3,50 .138 10,1 .398 3,05 .120
3.41220R900SF finish spotface (uncoated) >9,0 18,0 >.3438 .7500 3,50 .138 10,1 .398 - -
3.41220R900STF finish spotface (TiN coated) >9,0 18,0 >.3438 .7500 3,50 .138 10,1 .398 - -
*Insert requires additional grinding at cutting face prior to machine use. All contact surfaces are ground.
HSK MODBORE
KenTIP Custom Solutions
• Drilling and chamfering in one operation.
• No height adjustment required.
• Low set-up time.
ROMICRON
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A29

SOLID CARBIDE DRILLING
KenTIP HPM Insert Blades
NEW
Intermediate Diameters!
D1 Tolerances k8
MODULAR DRILLING
140°
D1
D1
metric
Tolerance
8,0 - 10,0 + 0,022 / 0,000 .315 - .394 +.0009 / .0000
>10,0 - 16,9 + 0,027 / 0,000 >.394 - .669 +.0011 / .0000
D1
inch
Tolerance
INDEXABLE DRILLING
HOLEMAKING
HSK MODBORE
ROMICRON
mm
D1
inch
Order
number
ISO
Catalog
number
ANSI
Catalog
number
KC7315
Insert
Seat
Size
7,94 .312 2269793 KTIP0794HPM KTIP03125HP F
8,00 .315 2258306 KTIP0800HPM KTIP0800HPM F
8,10 .319 2268550 KTIP0810HPM KTIP0810HPM F
8,16 .321 2269753 KTIP0816HPM KTIP03214HP F
8,20 .323 2269754 KTIP0820HPM KTIP03230HP F
8,30 .327 2268551 KTIP0830HPM KTIP0830HPM F
8,33 .328 2269755 KTIP0833HPM KTIP03281HP F
8,40 .331 2268552 KTIP0840HPM KTIP0840HPM F
8,43 .332 2269756 KTIP0843HPM KTIP03320HP F
8,50 .335 2268973 KTIP0850HPM KTIP0850HPM G
8,60 .339 2268974 KTIP0860HPM KTIP0860HPM G
8,61 .339 2269757 KTIP0861HPM KTIP03390HP G
8,70 .343 2268975 KTIP0870HPM KTIP0870HPM G
8,73 .343 2269758 KTIP0873HPM KTIP03438HP G
8,80 .346 2268976 KTIP0880HPM KTIP0880HPM G
8,84 .348 2269759 KTIP0884HPM KTIP03480HP G
8,90 .350 2268977 KTIP0890HPM KTIP0890HPM G
9,00 .354 2268978 KTIP0900HPM KTIP0900HPM H
9,09 .358 2269760 KTIP0909HPM KTIP03580HP H
9,10 .358 2268979 KTIP0910HPM KTIP0910HPM H
9,13 .359 2269761 KTIP0913HPM KTIP03594HP H
9,20 .362 2268980 KTIP0920HPM KTIP0920HPM H
9,30 .366 2268981 KTIP0930HPM KTIP0930HPM H
9,35 .368 2269762 KTIP0935HPM KTIP03680HP H
9,40 .370 2268982 KTIP0940HPM KTIP0940HPM H
9,50 .374 2268983 KTIP0950HPM KTIP0950HPM I
9,53 .375 2269763 KTIP0953HPM KTIP03750HP I
9,56 .376 2269764 KTIP0956HPM KTIP03763HP I
9,58 .377 2269765 KTIP0958HPM KTIP03770HP I
9,60 .378 2268984 KTIP0960HPM KTIP0960HPM I
9,70 .382 2269766 KTIP0970HPM KTIP03820HP I
9,80 .386 2269767 KTIP0980HPM KTIP03860HP I
9,90 .390 2268985 KTIP0990HPM KTIP0990HPM I
9,92 .390 2269768 KTIP0992HPM KTIP03906HP I
10,00 .394 2258307 KTIP1000HPM KTIP1000HPM J
10,02 .394 2269769 KTIP1002HPM KTIP03946HP J
10,08 .397 2269770 KTIP1008HPM KTIP03970HP J
10,10 .398 2268986 KTIP1010HPM KTIP1010HPM J
10,20 .402 2268987 KTIP1020HPM KTIP1020HPM J
10,26 .404 2269771 KTIP1026HPM KTIP04040HP J
10,30 .406 2268988 KTIP1030HPM KTIP1030HPM J
10,32 .406 2269772 KTIP1032HPM KTIP04062HP J
10,40 .409 2240041 KTIP1040HPM KTIP1040HPM J
10,49 .413 2269773 KTIP1049HPM KTIP04130HP J
10,50 .413 2268989 KTIP1050HPM KTIP1050HPM K
10,60 .417 2268990 KTIP1060HPM KTIP1060HPM K
10,70 .421 2268991 KTIP1070HPM KTIP1070HPM K
10,72 .421 2269774 KTIP1072HPM KTIP04219HP K
10,80 .425 2268992 KTIP1080HPM KTIP1080HPM K
10,90 .429 2268993 KTIP1090HPM KTIP1090HPM K
11,00 .433 2268994 KTIP1100HPM KTIP1100HPM L
11,10 .437 2268995 KTIP1110HPM KTIP1110HPM L
11,11 .437 2269775 KTIP1111HPM KTIP04375HP L
11,20 .441 2268996 KTIP1120HPM KTIP1120HPM L
11,30 .445 2254192 KTIP1130HPM KTIP1130HPM L
11,40 .449 2268997 KTIP1140HPM KTIP1140HPM L
11,50 .453 2268998 KTIP1150HPM KTIP1150HPM M
11,51 .453 2269776 KTIP1151HPM KTIP04531HP M
11,60 .457 2268999 KTIP1160HPM KTIP1160HPM M
mm
D1
inch
Order
number
ISO
Catalog
number
ANSI
Catalog
number
KC7315
Insert
Seat
Size
11,61 .457 2269777 KTIP1161HPM KTIP04571HP M
11,70 .461 2269000 KTIP1170HPM KTIP1170HPM M
11,80 .465 2269001 KTIP1180HPM KTIP1180HPM M
11,90 .469 2269002 KTIP1190HPM KTIP1190HPM M
11,91 .468 2269778 KTIP1191HPM KTIP04688HP M
12,00 .472 2258308 KTIP1200HPM KTIP1200HPM N
12,10 .476 2269003 KTIP1210HPM KTIP1210HPM N
12,20 .480 2269004 KTIP1220HPM KTIP1220HPM N
12,30 .484 2269779 KTIP1230HPM KTIP04844HP N
12,40 .488 2269005 KTIP1240HPM KTIP1240HPM N
12,47 .491 2269780 KTIP1247HPM KTIP04911HP N
12,50 .492 2269006 KTIP1250HPM KTIP1250HPM O
12,60 .496 2269007 KTIP1260HPM KTIP1260HPM O
12,70 .500 2269781 KTIP1270HPM KTIP05000HP O
12,80 .504 2491380 KTIP1280HPM KTIP1280HPM O
12,90 .508 2269782 KTIP1290HPM KTIP05080HP O
13,00 .512 2266152 KTIP1300HPM KTIP1300HPM P
13,10 .515 2269783 KTIP1310HPM KTIP05156HP P
13,20 .520 2610194 KTIP1320HPM KTIP1320HPM P
13,30 .524 2269008 KTIP1330HPM KTIP1330HPM P
13,40 .528 2641557 KTIP1340HPM KTIP1340HPM P
13,49 .531 2269784 KTIP1349HPM KTIP05312HP P
13,50 .531 2269009 KTIP1350HPM KTIP1350HPM Q
13,60 .535 2630538 KTIP1360HPM KTIP1360HPM Q
13,70 .539 2396961 KTIP1370HPM KTIP1370HPM Q
13,80 .543 2419341 KTIP1380HPM KTIP1380HPM Q
13,89 .546 2269785 KTIP1389HPM KTIP05469HP Q
13,90 .547 2269786 KTIP1390HPM KTIP05471HP Q
14,00 .551 2269010 KTIP1400HPM KTIP1400HPM R
14,10 .555 2401860 KTIP1410HPM KTIP1410HPM R
14,20 .559 2269011 KTIP1420HPM KTIP1420HPM R
14,29 .562 2269787 KTIP1429HPM KTIP05625HP R
14,30 .563 2269012 KTIP1430HPM KTIP1430HPM R
14,40 .567 2401211 KTIP1440HPM KTIP1440HPM R
14,50 .571 2269013 KTIP1450HPM KTIP1450HPM S
14,60 .575 2398855 KTIP1460HPM KTIP1460HPM S
14,67 .577 2269788 KTIP1467HPM KTIP05774HP S
14,68 .578 2269789 KTIP1468HPM KTIP05781HP S
14,70 .579 2269014 KTIP1470HPM KTIP1470HPM S
14,80 .583 2269015 KTIP1480HPM KTIP1480HPM S
14,90 .587 2646798 KTIP1490HPM KTIP1490HPM S
15,00 .591 2269016 KTIP1500HPM KTIP1500HPM T
15,08 .593 2269790 KTIP1508HPM KTIP05938HP T
15,10 .594 2646799 KTIP1510HPM KTIP1510HPM T
15,20 .598 2646800 KTIP1520HPM KTIP1520HPM T
15,30 .602 2269017 KTIP1530HPM KTIP1530HPM T
15,40 .606 2488572 KTIP1540HPM KTIP1540HPM T
15,48 .609 2269791 KTIP1548HPM KTIP06094HP T
15,50 .610 2269018 KTIP1550HPM KTIP1550HPM T
15,60 .614 2459124 KTIP1560HPM KTIP1560HPM T
15,70 .618 2269019 KTIP1570HPM KTIP1570HPM T
15,80 .622 2269020 KTIP1580HPM KTIP1580HPM T
15,88 .625 2269792 KTIP1588HPM KTIP06250HP T
16,00 .630 2258309 KTIP1600HPM KTIP1600HPM U
16,03 .631 2646801 KTIP1603HPM KTIP06310HP U
16,08 .633 2646802 KTIP1608HPM KTIP06330HP U
16,10 .634 2448304 KTIP1610HPM KTIP1610HPM U
16,20 .638 2496158 KTIP1620HPM KTIP1620HPM U
16,27 .640 2646923 KTIP1627HPM KTIP06406HP U
A30
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KenTIP HPM Insert Blades
Expanded Diameter Range!
NEW
SOLID CARBIDE DRILLING
D1 Tolerances k8
140°
D1
D1
metric
Tolerance
8,0 - 10,0 + 0,022 / 0,000 .315 - .394 +.0009 / .0000
>10,0 - 16,9 + 0,027 / 0,000 >.394 - .669 +.0011 / .0000
D1
inch
Tolerance
MODULAR DRILLING
mm
D1
inch
Order
number
ISO
Catalog
number
ANSI
Catalog
number
KC7315
Insert
Seat
Size
16,30 .642 2611859 KTIP1630HPM KTIP1630HPM U
16,40 .646 2646924 KTIP1640HPM KTIP1640HPM U
16,50 .650 2504824 KTIP1650HPM KTIP1650HPM U
16,60 .654 2619484 KTIP1660HPM KTIP1660HPM U
16,67 .656 2611860 KTIP1667HPM KTIP06562HP U
16,70 .657 2623676 KTIP1670HPM KTIP1670HPM U
16,80 .661 2646925 KTIP1680HPM KTIP1680HPM U
16,87 .664 2646926 KTIP1687HPM KTIP06643HP U
16,90 .665 2646927 KTIP1690HPM KTIP1690HPM U
HOLEMAKING
INDEXABLE DRILLING
HSK MODBORE
Get the metalcutting industry’s most experienced and reliable technical
and product application advice! Our problem-solving / troubleshooting
professionals are available to ensure that your Kennametal tools provide
optimum performance.
ROMICRON
Visit us online at
www.kennametal.com
to find your local contact.
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A31

SOLID CARBIDE DRILLING
MODULAR DRILLING
INDEXABLE DRILLING
HOLEMAKING
HSK MODBORE
KenTIP Drills
Cutting Data Recommendations
Cutting Groups
1.1
1.2
2.1
2.2
3
4
5
6
7
8
9
15
16
17
18
19
20
Material Group
Unalloyed Steel,
Cast Steel,
Machining Steel
Low-Alloy Steel,
Cast Steel,
Machining Steel
Gray Cast Iron
Cast Iron with
Nodular Cast Iron
Malleable Cast
Iron
C = 0,10 - 0,25 Annealed, long-chipping
C = 0,10 - 0,25 Annealed, short-chipping
C = 0,25 - 0,55 Annealed, long-chipping
C = 0,25 - 0,55 Annealed, short-chipping
C = 0,25 - 0,55 Tempered
C = 0,25 - 0,80 Annealed
C = 0,25 - 0,80 Tempered
Annealed
Tempered
Tempered
Tempered
Pearlitic/Ferritic
Pearlitic (Martensitic)
Ferritic
Pearlitic
Ferritic
Pearlitic
Composition /Structure
Tensile Strength RM
(Mpa)
Hardness HB
420 125
420 125
640 190
640 190
850 250
915 270
1020 300
610 180
930 275
1020 300
1190 350
180
260
160
250
130
230
Cutting
Speed vc:
(m/min)
(sfm)
D =
8 mm
.3150”
Feed Rate Per Revolution by Drill Diameter:
(mm/rev)
(ipr)
D =
10 mm
.3937”
D =
12 mm
.4724”
D =
14 mm
.5512”
D =
16 mm
.6299”
110 - 170 0,11 - 0,20 0,13 - 0,24 0,14 - 0,28 0,17 - 0,32 0,19 - 0,35
360 - 560 .004 - .008 .005 - .009 .006 - .011 .007 - .013 .008 - .014
120 - 180 0,11 - 0,20 0,13 - 0,24 0,14 - 0,28 0,17 - 0,32 0,19 - 0,35
390 - 590 .004 - .008 .005 - .009 .006 - .011 .007 - .013 .008 - .014
100 - 150 0,13 - 0,24 0,15 - 0,29 0,17 - 0,33 0,19 - 0,36 0,22 - 0,41
330 - 490 .005 - .009 .006 - .011 .008 - .013 .008 - .014 .009 - .016
110 - 155 0,13 - 0,24 0,15 - 0,29 0,17 - 0,33 0,19 - 0,36 0,22 - 0,41
360 - 510 .005 - .009 .006 - .011 .008 - .013 .008 - .014 .009 - .016
80 - 120 0,13 - 0,21 0,15 - 0,25 0,18 - 0,31 0,21 - 0,39 0,23 - 0,45
260 - 390 .005 - .008 .006 - .010 .007 - .012 .008 - .015 .009 - .018
70 - 95 0,11 - 0,20 0,15 - 0,24 0,16 - 0,29 0,21 - 0,34 0,23 - 0,37
230 - 310 .004 - .008 .006 - .009 .006 - .011 .008 - .013 .009 - .015
50 - 75 0,11 - 0,19 0,12 - 0,23 0,16 - 0,28 0,21 - 0,32 0,23 - 0,35
160 - 250 .004 - .008 .005 - .009 .006 - .011 .008 - .013 .009 - .014
70 - 95 0,15 - 0,28 0,16 - 0,35 0,21 - 0,37 0,23 - 0,46 0,25 - 0,46
230 - 310 .006 - .011 .006 - .014 .008 - .015 .009 - .018 .010 - .018
70 - 95 0,11 - 0,21 0,14 - 0,25 0,19 - 0,30 0,21 - 0,33 0,23 - 0,37
230 - 310 .004 - .008 .006 - .010 .008 - .012 .008 - .013 .009 - .015
60 - 90 0,11 - 0,19 0,12 - 0,23 0,16 - 0,26 0,18 - 0,31 0,21 - 0,33
200 - 300 .004 - .008 .005 - .009 .006 - .010 .007 - .012 .008 - .013
50 - 75 0,11 - 0,20 0,12 - 0,23 0,16 - 0,25 0,17 - 0,29 0,18 - 0,32
160 - 250 .004 - .008 .005 - .009 .006 - .010 .007 - .011 .007 - .013
120 - 170 0,17 - 0,32 0,20 - 0,37 0,23 - 0,43 0,27 - 0,48 0,30 - 0,55
390 - 560 .007 - .013 .008 - .015 .009 - .017 .011 - .019 .012 - .022
90 - 120 0,14 - 0,25 0,16 - 0,31 0,19 - 0,35 0,23 - 0,42 0,26 - 0,47
300 - 390 .006 - .010 .006 - .012 .008 - .014 .009 - .017 .010 - .019
60 - 90 0,14 - 0,25 0,16 - 0,30 0,19 - 0,35 0,22 - 0,40 0,24 - 0,45
200 - 300 .006 - .010 .006 - .012 .008 - .014 .009 - .016 .009 - .018
40 - 65 0,10 - 0,19 0,12 - 0,22 0,14 - 0,25 0,16 - 0,31 0,19 - 0,35
130 - 210 .004 - .008 .005 - .009 .006 - .010 .006 - .012 .008 - .019
80 - 105 0,14 - 0,26 0,17 - 0,31 0,19 - 0,35 0,21 - 0,40 0,23 - 0,44
260 - 340 .006 - .010 .007 - .012 .008 - .014 .008 - .016 .009 - .017
80 - 105 0,13 - 0,24 0,15 - 0,28 0,17 - 0,32 0,19 - 0,35 0,21 - 0,39
260 - 340 .005 - .010 .006 - .011 .007 - .013 .008 - .014 .008 - .015
ROMICRON
Performance Diagrams
Note:
The diagrams are used to determine the feed force,
drive power, and torque.
They are based on cutting force measurements in
steel with a tensile strength of: Rm = 800 N/mm 2 .
The base cutting speed used is: vc = 80 m/min (260 sfm).
Drive Power Feed Force Torque
P s [kW]
F f [kN]
Md [Nm]
4,5
3,0
30
f = 0,35 mm
4,0
f = 0,35 mm
2,5
25
3,5
f = 0,35 mm
3,0
2,0
20
2,5
2,0
1,5
f = 0,25 mm
f = 0,15 mm
1,5
1,0
f = 0,25 mm
f = 0,15 mm
15
10
f = 0,25 mm
1,0
0,5
0,5
5
f = 0,15 mm
0
0
0
0 8 10 12 14 16
0 8 10 12 14 16
0 8 10 12 14 16
Drill diameter D1 [mm] => Drill diameter D1 [mm] => Drill diameter D1 [mm] =>
A32
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Mounting the
KenTIP Inserts
KenTIP – Application Guidelines
SOLID CARBIDE DRILLING
MODULAR DRILLING
Cooling the KenTIP Drill
Dry
machining
HOLEMAKING
INDEXABLE DRILLING
External
cooling
HSK MODBORE
✔
✔
only when using the 3xD tool bodies
ROMICRON
Note
Max. 0,02 mm
(.001”)
Max. 0,02 mm
(.001”)
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A33

®
FOR GENERAL ®
ENGINEERING
Kennametal enables leading general
engineering manufacturers to compete
globally. Every day, in 60 countries
worldwide – we deliver the latest
advanced tooling technologies that
drive total cost savings to meet tough
productivity targets.
Power Component
Medical
Component
Additional information:
Visit us online at
www.kennametal.com
or ask your Kennametal representative!
A34

KSEM HPG Insert Blades
New Geometry
NEW
SOLID CARBIDE DRILLING
D1 Tolerances h8
140°
D1
D1
metric
Tolerance
12,5 - 18,0 0,000 / -0,027 .500 - .709 .0000 / -.0010
>18,0 - 30,0 0,000 / -0,033 >.709 -1.181 .0000 / -.0013
>30,0 - 40,0 0,000 / -0,039 >1.181 -1.575 .0000 / -.0015
D1
inch
Tolerance
MODULAR DRILLING
mm
D1
inch
Order
number
ISO
Catalog
number
ANSI
Catalog
number
12,50 .492 2449924 KSEM1250HPGM KSEM1250HPGM C
12,60 .496 2499723 KSEM1260HPGM KSEM1260HPGM C
12,70 .500 2499607 KSEM1270HPGM KSEM0500HPG C
12,80 .504 2499725 KSEM1280HPGM KSEM1280HPGM C
12,93 .509 2499608 KSEM1293HPGM KSEM0509HPG C
13,00 .512 2499727 KSEM1300HPGM KSEM1300HPGM C
13,10 .516 2499609 KSEM1310HPGM KSEM0516HPG C
13,20 .520 2499729 KSEM1320HPGM KSEM1320HPGM C
13,50 .531 2499730 KSEM1350HPGM KSEM1350HPGM C
13,60 .535 2499731 KSEM1360HPGM KSEM1360HPGM B
13,70 .539 2499732 KSEM1370HPGM KSEM1370HPGM B
13,80 .543 2499733 KSEM1380HPGM KSEM1380HPGM B
13,89 .547 2499610 KSEM1389HPGM KSEM0547HPG B
14,00 .551 2499735 KSEM1400HPGM KSEM1400HPGM B
14,10 .555 2499736 KSEM1410HPGM KSEM1410HPGM B
14,20 .559 2499737 KSEM1420HPGM KSEM1420HPGM B
14,29 .563 2499611 KSEM1429HPGM KSEM0563HPG B
14,40 .567 2499739 KSEM1440HPGM KSEM1440HPGM B
14,50 .571 2499740 KSEM1450HPGM KSEM1450HPGM B
14,60 .575 2499741 KSEM1460HPGM KSEM1460HPGM A
14,68 .578 2499612 KSEM1468HPGM KSEM0578HPG A
14,80 .583 2499743 KSEM1480HPGM KSEM1480HPGM A
15,00 .591 2499744 KSEM1500HPGM KSEM1500HPGM A
15,08 .594 2499843 KSEM1508HPGM KSEM0594HPG A
15,30 .602 2499746 KSEM1530HPGM KSEM1530HPGM A
15,48 .609 2499844 KSEM1548HPGM KSEM0609HPG A
15,50 .610 2499748 KSEM1550HPGM KSEM1550HPGM A
15,60 .614 2499749 KSEM1560HPGM KSEM1560HPGM A
15,70 .618 2499750 KSEM1570HPGM KSEM1570HPGM A
15,80 .622 2499751 KSEM1580HPGM KSEM1580HPGM A
15,88 .625 2499845 KSEM1588HPGM KSEM0625HPG A
16,00 .630 2499753 KSEM1600HPGM KSEM1600HPGM 1
16,09 .634 2499846 KSEM1609HPGM KSEM0634HPG 1
16,20 .638 2499755 KSEM1620HPGM KSEM1620HPGM 1
16,27 .641 2499847 KSEM1627HPGM KSEM0641HPG 1
16,50 .650 2499757 KSEM1650HPGM KSEM1650HPGM 1
16,67 .656 2499848 KSEM1667HPGM KSEM0656HPG 1
17,00 .669 2499759 KSEM1700HPGM KSEM1700HPGM 1
17,07 .672 2499849 KSEM1707HPGM KSEM0672HPG 1
17,46 .688 2499850 KSEM1746HPGM KSEM0688HPG 1
17,50 .689 2487433 KSEM1750HPGM KSEM1750HPGM 1
17,86 .703 2499851 KSEM1786HPGM KSEM0703HPG 1
18,00 .709 2499763 KSEM1800HPGM KSEM1800HPGM 1
18,26 .719 2499852 KSEM1826HPGM KSEM0719HPG 2
18,50 .728 2499765 KSEM1850HPGM KSEM1850HPGM 2
18,65 .734 2499853 KSEM1865HPGM KSEM0734HPG 2
19,00 .748 2499767 KSEM1900HPGM KSEM1900HPGM 2
19,05 .750 2499854 KSEM1905HPGM KSEM0750HPG 2
19,27 .759 2499855 KSEM1927HPGM KSEM0759HPG 2
19,45 .766 2499856 KSEM1945HPGM KSEM0766HPG 2
19,50 .768 2499771 KSEM1950HPGM KSEM1950HPGM 2
19,84 .781 2499857 KSEM1984HPGM KSEM0781HPG 2
20,00 .787 2450909 KSEM2000HPGM KSEM2000HPGM 3
20,24 .797 2499858 KSEM2024HPGM KSEM0797HPG 3
20,50 .807 2465988 KSEM2050HPGM KSEM2050HPGM 3
20,64 .813 2499859 KSEM2064HPGM KSEM0813HPG 3
21,00 .827 2499775 KSEM2100HPGM KSEM2100HPGM 3
21,43 .844 2499860 KSEM2143HPGM KSEM0844HPG 3
21,50 .846 2499777 KSEM2150HPGM KSEM2150HPGM 3
KC7315
Insert
Seat
Size
mm
D1
inch
Order
number
21,83 .859 2499861 KSEM2183HPGM KSEM0859HPG 3
22,00 .866 2499779 KSEM2200HPGM KSEM2200HPGM 3
22,23 .875 2499862 KSEM2223HPGM KSEM0875HPG 4
22,44 .884 2499863 KSEM2244HPGM KSEM0884HPG 4
22,50 .886 2499782 KSEM2250HPGM KSEM2250HPGM 4
23,00 .906 2449518 KSEM2300HPGM KSEM2300HPGM 4
23,42 .922 2499864 KSEM2342HPGM KSEM0922HPG 4
23,50 .925 2499784 KSEM2350HPGM KSEM2350HPGM 4
23,81 .938 2499865 KSEM2381HPGM KSEM0938HPG 4
24,00 .945 2499786 KSEM2400HPGM KSEM2400HPGM 4
24,50 .965 2499787 KSEM2450HPGM KSEM2450HPGM 5
24,61 .969 2499866 KSEM2461HPGM KSEM0969HPG 5
25,00 .984 2499789 KSEM2500HPGM KSEM2500HPGM 5
25,40 1.000 2499867 KSEM2540HPGM KSEM1000HPG 5
25,50 1.004 2499791 KSEM2550HPGM KSEM2550HPGM 5
25,67 1.011 2499868 KSEM2567HPGM KSEM1011HPG 5
26,00 1.024 2449473 KSEM2600HPGM KSEM2600HPGM 5
26,19 1.031 2499869 KSEM2619HPGM KSEM1031HPG 6
26,50 1.043 2494500 KSEM2650HPGM KSEM2650HPGM 6
26,59 1.047 2499870 KSEM2659HPGM KSEM1047HPG 6
27,00 1.063 2499795 KSEM2700HPGM KSEM2700HPGM 6
27,50 1.083 2499796 KSEM2750HPGM KSEM2750HPGM 6
27,78 1.094 2499871 KSEM2778HPGM KSEM1094HPG 6
28,00 1.102 2499798 KSEM2800HPGM KSEM2800HPGM 6
28,18 1.109 2499872 KSEM2818HPGM KSEM1109HPG 7
28,50 1.122 2499800 KSEM2850HPGM KSEM2850HPGM 7
28,58 1.125 2499873 KSEM2858HPGM KSEM1125HPG 7
29,00 1.142 2499802 KSEM2900HPGM KSEM2900HPGM 7
29,50 1.161 2499803 KSEM2950HPGM KSEM2950HPGM 7
29,73 1.156 2499874 KSEM2973HPGM KSEM1156HPG 7
29,77 1.172 2499875 KSEM2977HPGM KSEM1172HPG 7
30,00 1.181 2449475 KSEM3000HPGM KSEM3000HPGM 7
30,16 1.188 2499876 KSEM3016HPGM KSEM1188HPG 8
30,50 1.201 2499807 KSEM3050HPGM KSEM3050HPGM 8
30,56 1.203 2499877 KSEM3056HPGM KSEM1203HPG 8
30,96 1.219 2499878 KSEM3096HPGM KSEM1219HPG 8
31,00 1.220 2499810 KSEM3100HPGM KSEM3100HPGM 8
31,50 1.240 2499811 KSEM3150HPGM KSEM3150HPGM 8
31,75 1.250 2499879 KSEM3175HPGM KSEM1250HPG 8
32,00 1.260 2499813 KSEM3200HPGM KSEM3200HPGM 8
Continued on page A36.
ISO
Catalog
number
ANSI
Catalog
number
KC7315
Insert
Seat
Size
HOLEMAKING
INDEXABLE DRILLING
HSK MODBORE
ROMICRON
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A35

SOLID CARBIDE DRILLING
KSEM HPG Insert Blades
NEW
New Geometry
Continued from page A35.
D1 Tolerances h8
MODULAR DRILLING
140°
D1
D1
metric
Tolerance
12,5 - 18,0 0,000 / -0,027 .500 - .709 .0000 / -.0010
>18,0 - 30,0 0,000 / -0,033 >.709 -1.181 .0000 / -.0013
>30,0 - 40,0 0,000 / -0,039 >1.181 -1.575 .0000 / -.0015
D1
inch
Tolerance
INDEXABLE DRILLING
HOLEMAKING
HSK MODBORE
mm
Diameter
D1
inch
Order
number
ISO
Catalog
number
ANSI
Catalog
number
KC7315
Insert
Seat
Size
32,50 1.280 2499814 KSEM3250HPGM KSEM3250HPGM 9
32,54 1.281 2499880 KSEM3254HPGM KSEM1281HPG 9
32,94 1.297 2499881 KSEM3294HPGM KSEM1297HPG 9
33,00 1.299 2494501 KSEM3300HPGM KSEM3300HPGM 9
33,34 1.313 2499882 KSEM3334HPGM KSEM1313HPG 9
33,50 1.319 2499818 KSEM3350HPGM KSEM3350HPGM 9
33,73 1.328 2499883 KSEM3373HPGM KSEM1328HPG 9
34,00 1.339 2499820 KSEM3400HPGM KSEM3400HPGM 9
34,13 1.344 2499884 KSEM3413HPGM KSEM1344HPG 9
34,50 1.358 2499822 KSEM3450HPGM KSEM3450HPGM 9
34,93 1.375 2499885 KSEM3493HPGM KSEM1375HPG 9
35,00 1.378 2466477 KSEM3500HPGM KSEM3500HPGM 9
35,50 1.398 2499824 KSEM3550HPGM KSEM3550HPGM 9
35,72 1.406 2499886 KSEM3572HPGM KSEM1406HPG 9
36,00 1.417 2499826 KSEM3600HPGM KSEM3600HPGM 9
36,12 1.422 2499887 KSEM3612HPGM KSEM1422HPG 10
36,50 1.437 2499828 KSEM3650HPGM KSEM3650HPGM 10
36,51 1.438 2499888 KSEM3651HPGM KSEM1438HPG 10
37,00 1.457 2466598 KSEM3700HPGM KSEM3700HPGM 10
37,31 1.469 2499889 KSEM3731HPGM KSEM1469HPG 10
37,50 1.476 2499831 KSEM3750HPGM KSEM3750HPGM 10
38,00 1.496 2466478 KSEM3800HPGM KSEM3800HPGM 10
38,10 1.500 2499890 KSEM3810HPGM KSEM1500HPG 10
38,46 1.514 2499891 KSEM3846HPGM KSEM1514HPG 10
38,50 1.516 2499834 KSEM3850HPGM KSEM3850HPGM 10
39,00 1.535 2499835 KSEM3900HPGM KSEM3900HPGM 10
39,50 1.555 2499836 KSEM3950HPGM KSEM3950HPGM 10
40,00 1.575 2449476 KSEM4000HPGM KSEM4000HPGM 10
ROMICRON
KSEM HPG
Geometry
Drill up to 7xD without
pre-centering – reduce
cyle times, achieve higher
cutting speeds!
A36
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Cutting Groups
1.1
1.2
2.1
2.2
3
4
5
6
7
8
9
10
11
12
13
15
16
17
18
19
20
Material Group
Unalloyed Steel,
Cast Steel,
Machining Steel
Low-Alloy Steel,
Cast Steel,
Machining Steel
High-Alloy Steel,
Cast Steel, High-
Alloy Tool Steel
Stainless Steel,
Cast Steel
Gray Cast Iron
Cast Iron with
Nodular Cast Iron
Malleable
Cast Iron
C = 0,10 - 0,25 Annealed, long-chipping
C = 0,10 - 0,25 Annealed, short-chipping
C = 0,25 - 0,55 Annealed, long-chipping
C = 0,25 - 0,55 Annealed, short-chipping
C = 0,25 - 0,55 Tempered
C = 0,25 - 0,80 Annealed
C = 0,25 - 0,80 Tempered
Annealed
Tempered
Tempered
Tempered
Annealed
Hardened and Tempered
Ferritic/Martensitic
Martensitic
Pearlitic/Ferritic
Pearlitic (Martensitic)
Ferritic
Pearlitic
Ferritic
Pearlitic
Composition /Structure
Annealed
Tempered
Tensile Strength RM
(Mpa)
Hardness HB
420 125
420 125
640 190
640 190
850 250
915 270
1020 300
610 180
930 275
1020 300
1190 350
680 200
1100 325
680 200
810 240
180
260
160
250
130
230
Cutting
Speed vc:
(m/min)
(sfm)
D =
12,5 mm
.4921”
D =
16 mm
.6299”
KSEM HPG Insert Blades
Cutting Data Recommendations
Feed Rate Per Revolution by Drill Diameter:
(mm/rev)
(ipr)
D =
20 mm
.7874”
D =
22 mm
.8661”
D =
26 mm
1.0236”
D =
32 mm
1.2598”
D =
40 mm
1.5757”
100 - 140 0,15 - 0,28 0,17 - 0,32 0,19 - 0,35 0,22 - 0,41 0,25 - 0,46 0,29 - 0,53 0,33 - 0,61
330 - 460 .006 - .011 .007 - .013 .008 - .014 .009 - .016 .010 - .018 .011 - .021 .013 - .024
110 - 150 0,19 - 0,34 0,21 - 0,40 0,24 - 0,45 0,28 - 0,51 0,32 - 0,58 0,36 - 0,66 0,41 - 0,76
360 - 490 .008 - .013 .008 - .016 .009 - .018 .011 - .020 .013 - .023 .014 - .026 .016 - .030
90 - 125 0,15 - 0,28 0,17 - 0,32 0,19 - 0,35 0,22 - 0,41 0,25 - 0,46 0,29 - 0,53 0,33 - 0,61
300 - 410 .006 - .011 .007 - .013 .008 - .014 .009 - .016 .010 - .018 .011 - .021 .013 - .024
100 - 140 0,19 - 0,34 0,21 - 0,40 0,24 - 0,45 0,28 - 0,51 0,32 - 0,58 0,36 - 0,66 0,41 - 0,76
330 - 460 .008 - .013 .083 - .016 .009 - .018 .011 - .020 .013 - .023 .014 - .026 .016 - .030
75 - 115 0,17 - 0,31 0,19 - 0,34 0,21 - 0,40 0,24 - 0,45 0,28 - 0,51 0,32 - 0,58 0,36 - 0,66
250 - 380 .007 - .012 .008 - .013 .008 - .016 .009 - .018 .011 - .020 .013 - .023 .014 - .026
70 - 100 0,17 - 0,31 0,19 - 0,34 0,21 - 0,40 0,24 - 0,45 0,28 - 0,51 0,32 - 0,58 0,36 - 0,66
230 - 330 .007 - .012 .008 - .013 .008 - .016 .009 - .018 .011 - .020 .013 - .023 .014 - .026
60 - 80 0,15 - 0,28 0,17 - 0,32 0,19 - 0,35 0,22 - 0,41 0,25 - 0,46 0,29 - 0,53 0,33 - 0,61
200 - 260 .006 - .011 .007 - .013 .008 - .014 .009 - .016 .010 - .018 .011 - .021 .013 - .024
70 - 95 0,17 - 0,31 0,19 - 0,34 0,21 - 0,40 0,24 - 0,45 0,28 - 0,51 0,32 - 0,58 0,36 - 0,66
230 - 310 .007 - .012 .008 - .013 .008 - .016 .009 - .018 .011 - .020 .013 - .023 .014 - .026
65 - 90 0,15 - 0,28 0,17 - 0,32 0,19 - 0,35 0,22 - 0,41 0,25 - 0,46 0,29 - 0,53 0,33 - 0,61
210 - 300 .006 - .011 .007 - .013 .008 - .014 .009 - .016 .010 - .018 .011 - .021 .013 - .024
60 - 80 0,14 - 0,25 0,15 - 0,29 0,18 - 0,32 0,20 - 0,36 0,23 - 0,42 0,26 - 0,47 0,30 - 0,54
200 - 260 .006 - .010 .006 - .011 .007 - .013 .008 - .014 .009 - .017 .010 - .019 .012 - .021
55 - 75 0,12 - 0,22 0,14 - 0,25 0,16 - 0,29 0,18 - 0,33 0,20 - 0,37 0,23 - 0,43 0,26 - 0,48
180 - 250 .005 - .009 .006 - .010 .006 - .011 .007 - .013 .008 - .015 .009 - .017 .010 - .019
60 - 80 0,14 - 0,25 0,15 - 0,29 0,18 - 0,32 0,20 - 0,36 0,23 - 0,42 0,26 - 0,47 0,30 - 0,54
200 - 260 .006 - .010 .006 - .011 .007 - .013 .008 - .014 .009 - .017 .010 - .019 .012 - .021
50 - 70 0,12 - 0,22 0,14 - 0,25 0,16 - 0,29 0,18 - 0,33 0,20 - 0,37 0,23 - 0,43 0,26 - 0,48
160 - 230 .005 - .009 .006 - .010 .006 - .011 .007 - .013 .008 - .015 .009 - .017 .010 - .019
55 - 80 0,09 - 0,17 0,11 - 0,20 0,12 - 0,23 0,13 - 0,24 0,15 - 0,28 0,17 - 0,32 0,20 - 0,36
180 - 260 .004 - .007 .004 - .008 .005 - .009 .005 - .009 .006 - .011 .007 - .013 .008 - .014
50 - 70 0,09 - 0,17 0,11 - 0,20 0,12 - 0,23 0,13 - 0,24 0,15 - 0,28 0,17 - 0,32 0,20 - 0,36
160 - 230 .004 - .007 .004 - .008 .005 - .009 .005 - .009 .006 - .011 .007 - .013 .008 - .014
55 - 100 0,22 - 0,35 0,26 - 0,42 0,30 - 0,48 0,32 - 0,52 0,36 - 0,58 0,42 - 0,67 0,48 - 0,76
180 - 330 .009 - .014 .010 -.0165 .012 - .019 .013 - .021 .014 - .023 .017 - .026 .019 - .030
65 - 100 0,20 - 0,36 0,23 - 0,42 0,27 - 0,48 0,28 - 0,52 0,31 - 0,57 0,36 - 0,65 0,41 - 0,73
210 - 330 .008 -.0142 .009 - .017 .011 - .019 .011 - .021 .012 - .022 .014 - .026 .016 - .029
90 - 125 0,17 - 0,33 0,21 - 0,41 0,25 - 0,48 0,27 - 0,52 0,31 - 0,59 0,37 - 0,70 0,43 - 0,81
300 - 410 .007 - .013 .008 - .016 .010 - .019 .011 - .021 .012 - .023 .015 - .028 .017 - .032
65 - 100 0,20 - 0,36 0,22 - 0,41 0,24 - 0,44 0,25 - 0,45 0,26 - 0,48 0,28 - 0,53 0,30 - 0,57
210 - 330 .008 - .014 .009 - .016 .009 - .017 .010 - .018 .010 - .019 .011 - .021 .012 - .023
90 - 125 0,20 - 0,36 0,22 - 0,41 0,24 - 0,44 0,25 - 0,45 0,26 - 0,48 0,28 - 0,53 0,30 - 0,57
300 - 410 .008 - .014 .009 - .016 .094 -.0173 .010 - .018 .010 - .019 .011 - .021 .012 - .022
90 - 125 0,18 - 0,32 0,20 - 0,35 0,21 - 0,39 0,22 - 0,40 0,23 - 0,42 0,25 - 0,45 0,27 - 0,48
300 - 410 .007 - .013 .008 - .014 .008 - .015 .009 - .016 .009 - .017 .010 - .018 .011 - .019
SOLID CARBIDE DRILLING
MODULAR DRILLING
HOLEMAKING
INDEXABLE DRILLING
HSK MODBORE
ROMICRON
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A37

SOLID CARBIDE DRILLING
KSEM PCM Insert Blades for Pre-Centering
NEW
New Grade and Geometry
D1 Tolerances k7
MODULAR DRILLING
150°
D1
D1
metric
Tolerance
12,5 - 18,0 +0,019 /+0,001 .500 - .709 +.0007 / +.0000
>18,0 - 30,0 +0,023 /+0,002 >.709 -1.181 +.0009 / +.0001
>30,0 - 32,0 +0,027 /+0,002 >1.181 -1.260 +.0011 / +.0001
D1
inch
Tolerance
INDEXABLE DRILLING
HOLEMAKING
HSK MODBORE
ROMICRON
Diameter
D1
mm
inch
Order
number
ISO
Catalog
number
ANSI
Catalog
number
KC7135
Insert
Seat
Size
12,50 .492 2252989 KSEM1250PCM KSEM1250PCM C
12,60 .496 2646063 KSEM1260PCM KSEM1260PCM C
12,80 .504 2646064 KSEM1280PCM KSEM1280PCM C
13,00 .512 2541511 KSEM1300PCM KSEM1300PCM C
13,20 .520 2646065 KSEM1320PCM KSEM1320PCM C
13,50 .531 2541512 KSEM1350PCM KSEM1350PCM C
13,60 .535 2548881 KSEM1360PCM KSEM1360PCM B
13,70 .539 2646066 KSEM1370PCM KSEM1370PCM B
13,80 .543 2646067 KSEM1380PCM KSEM1380PCM B
14,00 .551 2646068 KSEM1400PCM KSEM1400PCM B
14,10 .555 2646069 KSEM1410PCM KSEM1410PCM B
14,20 .559 2646070 KSEM1420PCM KSEM1420PCM B
14,40 .567 2646071 KSEM1440PCM KSEM1440PCM B
14,50 .571 2646072 KSEM1450PCM KSEM1450PCM B
14,60 .575 2646073 KSEM1460PCM KSEM1460PCM A
14,80 .583 2646074 KSEM1480PCM KSEM1480PCM A
15,00 .591 2646075 KSEM1500PCM KSEM1500PCM A
15,30 .602 2646076 KSEM1530PCM KSEM1530PCM A
15,50 .610 2646077 KSEM1550PCM KSEM1550PCM A
15,60 .614 2646078 KSEM1560PCM KSEM1560PCM A
15,70 .618 2646079 KSEM1570PCM KSEM1570PCM A
15,80 .622 2646080 KSEM1580PCM KSEM1580PCM A
16,00 .630 2646081 KSEM1600PCM KSEM1600PCM 1
16,20 .638 2646082 KSEM1620PCM KSEM1620PCM 1
16,50 .650 2646083 KSEM1650PCM KSEM1650PCM 1
17,00 .669 2646084 KSEM1700PCM KSEM1700PCM 1
17,50 .689 2252992 KSEM1750PCM KSEM1750PCM 1
18,00 .709 2541018 KSEM1800PCM KSEM1800PCM 1
18,50 .728 2541019 KSEM1850PCM KSEM1850PCM 2
19,00 .748 2646085 KSEM1900PCM KSEM1900PCM 2
19,50 .768 2646086 KSEM1950PCM KSEM1950PCM 2
20,00 .787 2623860 KSEM2000PCM KSEM2000PCM 3
20,50 .807 2646087 KSEM2050PCM KSEM2050PCM 3
21,00 .827 2646088 KSEM2100PCM KSEM2100PCM 3
21,50 .846 2646089 KSEM2150PCM KSEM2150PCM 3
22,00 .866 2646090 KSEM2200PCM KSEM2200PCM 3
22,50 .886 2646091 KSEM2250PCM KSEM2250PCM 4
23,00 .906 2541020 KSEM2300PCM KSEM2300PCM 4
23,50 .925 2646092 KSEM2350PCM KSEM2350PCM 4
24,00 .945 2646093 KSEM2400PCM KSEM2400PCM 4
24,50 .965 2646094 KSEM2450PCM KSEM2450PCM 5
25,00 .984 2542822 KSEM2500PCM KSEM2500PCM 5
25,50 1.004 2646095 KSEM2550PCM KSEM2550PCM 5
26,00 1.024 2253024 KSEM2600PCM KSEM2600PCM 5
26,50 1.043 2646096 KSEM2650PCM KSEM2650PCM 6
27,00 1.063 2646097 KSEM2700PCM KSEM2700PCM 6
27,50 1.083 2646098 KSEM2750PCM KSEM2750PCM 6
28,00 1.102 2646099 KSEM2800PCM KSEM2800PCM 6
28,50 1.122 2646100 KSEM2850PCM KSEM2850PCM 7
29,00 1.142 2646101 KSEM2900PCM KSEM2900PCM 7
29,50 1.161 2646102 KSEM2950PCM KSEM2950PCM 7
30,00 1.181 2542849 KSEM3000PCM KSEM3000PCM 7
30,50 1.201 2646103 KSEM3050PCM KSEM3050PCM 8
31,00 1.220 2646104 KSEM3100PCM KSEM3100PCM 8
31,50 1.240 2646105 KSEM3150PCM KSEM3150PCM 8
32,00 1.260 2405616 KSEM3200PCM KSEM3200PCM 8
KSEM PCM
Geometry
KSEM-PCM inserts for 150°
pre-centering are redesigned
with new HP technology
and grade KC7135
for longer tool life!
A38
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Cutting Groups
1.1
1.2
2.1
2.2
3
4
5
6
7
8
9
10
11
12
13
15
16
17
18
19
20
Material Group
Unalloyed Steel,
Cast Steel,
Machining Steel
Low-Alloy Steel,
Cast Steel,
Machining Steel
High-Alloy Steel,
Cast Steel, High-
Alloy Tool Steel
Stainless Steel,
Cast Steel
Gray Cast Iron
Cast Iron with
Nodular Cast Iron
Malleable
Cast Iron
Composition /Structure
C = 0,10 - 0,25 Annealed, long-chipping
C = 0,10 - 0,25 Annealed, short-chipping
C = 0,25 - 0,55 Annealed, long-chipping
C = 0,25 - 0,55 Annealed, short-chipping
C = 0,25 - 0,55 Tempered
C = 0,25 - 0,80 Annealed
C = 0,25 - 0,80 Tempered
Annealed
Tempered
Tempered
Tempered
Annealed
Hardened and Tempered
Ferritic/Martensitic
Martensitic
Pearlitic/Ferritic
Pearlitic (Martensitic)
Ferritic
Pearlitic
Ferritic
Pearlitic
Annealed
Tempered
Tensile Strength RM
(Mpa)
Hardness HB
420 125
420 125
640 190
640 190
850 250
915 270
1020 300
610 180
930 275
1020 300
1190 350
680 200
1100 325
680 200
810 240
180
260
160
250
130
230
Cutting
Speed vc:
(m/min)
(sfm)
D =
12,5 mm
.4921”
KSEM PCM Insert Blades
Cutting Data Recommendations
Feed Rate Per Revolution by Drill Diameter:
(mm/rev)
(ipr)
D =
16 mm
.6299”
D =
20 mm
.7874”
D =
22 mm
.8661”
D =
26 mm
1.0236”
D =
32 mm
1.2598”
90 - 110 0,14 - 0,18 0,15 - 0,20 0,17 - 0,23 0,20 - 0,26 0,23 - 0,30 0,26 - 0,35
300 - 360 .006 - .007 .006 - .008 .007 - .009 .008 - .010 .009 - .012 .010 - .014
100 - 120 0,17 - 0,23 0,19 - 0,25 0,22 - 0,29 0,25 - 0,34 0,29 - 0,38 0,32 - 0,43
330 - 390 .007 - .009 .008 - .010 .009 - .011 .010 - .013 .011 - .015 .013 - .017
80 - 100 0,14 - 0,18 0,15 - 0,20 0,17 - 0,23 0,20 - 0,26 0,23 - 0,30 0,26 - 0,35
260 - 330 .006 - .007 .006 - .008 .007 - .009 .008 - .010 .009 - .012 .010 - .014
90 - 110 0,17 - 0,23 0,19 - 0,25 0,22 - 0,29 0,25 - 0,34 0,29 - 0,38 0,32 - 0,43
300 - 360 .007 - .009 .008 - .010 .009 - .011 .010 - .013 .011 - .015 .013 - .017
70 - 90 0,15 - 0,20 0,17 - 0,23 0,19 - 0,25 0,22 - 0,29 0,25 - 0,34 0,29 - 0,38
230 - 300 .006 - .008 .007 - .009 .008 - .010 .009 - .011 .010 - .013 .011 - .015
65 - 75 0,15 - 0,20 0,17 - 0,23 0,19 - 0,25 0,22 - 0,29 0,25 - 0,34 0,29 - 0,38
210 - 250 .006 - .008 .007 - .009 .008 - .010 .009 - .011 .010 - .013 .011 - .015
55 - 65 0,14 - 0,18 0,15 - 0,20 0,17 - 0,23 0,20 - 0,26 0,23 - 0,30 0,26 - 0,35
180 - 210 .006 - .007 .006 - .008 .007 - .009 .008 - .010 .009 - .012 .010 - .014
55 - 65 0,15 - 0,20 0,17 - 0,23 0,19 - 0,25 0,22 - 0,29 0,25 - 0,34 0,29 - 0,38
180 - 210 .006 - .008 .007 - .009 .008 - .010 .009 - .011 .010 - .013 .011 - .015
60 - 70 0,14 - 0,18 0,15 - 0,20 0,17 - 0,23 0,20 - 0,26 0,23 - 0,30 0,26 - 0,35
200 - 230 .006 - .007 .006 - .008 .007 - .009 .008 - .010 .009 - .012 .010 - .014
55 - 65 0,13 - 0,17 0,14 - 0,18 0,15 - 0,20 0,18 - 0,24 0,21 - 0,28 0,23 - 0,31
180 - 210 .005 - .007 .006 - .007 .006 - .008 .007 - .009 .008 - .011 .009 - .012
50 - 60 0,11 - 0,14 0,13 - 0,17 0,14 - 0,19 0,16 - 0,22 0,18 - 0,24 0,21 - 0,28
160 - 200 .004 - .006 .005 - .007 .006 - .008 .006 - .009 .007 - .009 .008 - .011
55 - 65 0,13 - 0,17 0,14 - 0,18 0,15 - 0,20 0,18 - 0,24 0,21 - 0,28 0,23 - 0,31
180 - 210 .005 - .007 .006 - .007 .006 - .008 .007 - .009 .008 - .011 .009 - .012
45 - 55 0,11 - 0,14 0,13 - 0,17 0,14 - 0,19 0,16 - 0,22 0,18 - 0,24 0,21 - 0,28
150 - 180 .004 - .006 .005 - .007 .006 - .008 .006 - .009 .007 - .009 .008 - .011
50 - 60 0,08 - 0,11 0,10 - 0,13 0,11 - 0,14 0,12 - 0,16 0,14 - 0,18 0,15 - 0,20
160 - 200 .003 - .004 .004 - .005 .004 - .006 .005 - .006 .006 - .007 .006 - .008
45 - 55 0,08 - 0,11 0,10 - 0,13 0,11 - 0,14 0,12 - 0,16 0,14 - 0,18 0,15 - 0,20
150 - 180 .003 - .004 .004 - .005 .004 - .006 .005 - .006 .006 - .007 .006 - .008
35 - 45 0,08 - 0,11 0,09 - 0,12 0,11 - 0,14 0,12 - 0,16 0,14 - 0,18 0,15 - 0,20
110 - 150 .003 - .004 .004 - .005 .004 - .006 .005 - .006 .006 - .007 .006 - .008
60 - 70 0,22 - 0,29 0,23 - 0,31 0,26 - 0,35 0,29 - 0,38 0,32 - 0,43 0,36 - 0,48
200 - 230 .009 - .011 .009 - .012 .010 - .014 .011 - .015 .013 - .017 .014 - .019
65 - 75 0,18 - 0,24 0,21 - 0,28 0,23 - 0,31 0,25 - 0,34 0,28 - 0,37 0,32 - 0,42
210 - 250 .007 - .009 .008 - .011 .009 - .012 .010 - .013 .011 - .015 .013 - .017
80 - 100 0,15 - 0,20 0,18 - 0,24 0,21 - 0,28 0,24 - 0,32 0,28 - 0,37 0,31 - 0,42
260 - 330 .006 - .008 .007 - .009 .008 - .011 .009 - .013 .011 - .015 .012 - .017
65 - 75 0,18 - 0,24 0,20 - 0,26 0,22 - 0,29 0,23 - 0,30 0,23 - 0,31 0,25 - 0,34
210 - 250 .007 - .009 .008 - .010 .009 - .011 .009 - .012 .009 - .012 .010 - .013
80 - 100 0,18 - 0,24 0,20 - 0,26 0,22 - 0,29 0,23 - 0,30 0,23 - 0,31 0,25 - 0,34
260 - 330 .007 - .009 .008 - .010 .009 - .011 .009 - .012 .009 - .012 .010 - .013
SOLID CARBIDE DRILLING
MODULAR DRILLING
HOLEMAKING
INDEXABLE DRILLING
HSK MODBORE
ROMICRON
Centering using PCM inserts
HPM/HPGM inserts of the following drill
t z
150°
140°
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A39

SOLID CARBIDE DRILLING
DRILL-FIX DFR Drill Bodies – Metric
NEW
3xD and 4xD
Shank Version and Length Expansion
MODULAR DRILLING
INDEXABLE DRILLING
HOLEMAKING
L5
3xD WD25M Shank Expansion
min.
D1
D1
mm
[+-0,2]
L1
L4
max.
Order
number
Catalog number
3xD Tool Body
25 mm Shank Insert
L1
L4 L5
Insert
Screw
Torx
Wrench
17,5 17,5 18,5 2498749 DFR175R3WD25M DFR0302.. 81,5 52,5 0,6 192.416 170.023 7
18,0 18,0 19,0 2498750 DFR180R3WD25M DFR0302.. 83,0 54,0 0,6 192.416 170.023 7
18,5 18,5 19,5 2498751 DFR185R3WD25M DFR0302.. 84,5 55,5 0,6 192.416 170.023 7
19,0 19,0 20,0 2498752 DFR190R3WD25M DFR0302.. 86,0 57,0 0,6 192.416 170.023 7
19,5 19,5 20,5 2499003 DFR195R3WD25M DFR0302.. 87,5 58,5 0,6 192.416 170.023 7
20,0 20,0 21,0 2499004 DFR200R3WD25M DFR0302.. 92,0 60,0 0,6 192.416 170.023 7
20,5 20,5 21,5 2499005 DFR205R3WD25M DFR0403.. 93,5 61,5 0,7 192.432 170.028 8
21,0 21,0 22,0 1799056 DFR210R3WD25M DFR0403.. 95,0 63,0 0,7 192.432 170.028 8
22,0 22,0 23,0 1799059 DFR220R3WD25M DFR0403.. 98,0 66,0 0,7 192.432 170.028 8
23,0 23,0 24,0 2499006 DFR230R3WD25M DFR0403.. 101,0 69,0 0,7 192.432 170.028 8
24,0 24,0 25,0 2499007 DFR240R3WD25M DFR0403.. 104,0 72,0 0,7 192.432 170.028 8
LS
2°
D
Shank
Size
Shank
Dia.
D
Shank
Length
LS
WD20 20 45
WD25 25 45
WD32 32 58
Torx
Size
4xD Product Expansion
D1
HSK MODBORE
ROMICRON
min.
mm
[+-0,2]
max.
Order
number
Catalog number
4xD Tool Body Insert
L1
L4 L5
Insert
Screw
Torx
Wrench
12,5 12,5 13,5 2456906 DFR125R4WD20M DFR0202.. 72,0 50,0 0,5 193.281 170.027 6
12,7 12,7 13,7 2456907 DFR127R4WD20M DFR0202.. 72,8 50,8 0,5 193.281 170.027 6
13,0 13,0 14,0 2456908 DFR130R4WD20M DFR0202.. 74,0 52,0 0,5 193.281 170.027 6
13,5 13,5 14,5 2456909 DFR135R4WD20M DFR0202.. 76,0 54,0 0,5 193.281 170.027 6
14,0 14,0 15,0 2456910 DFR140R4WD20M DFR0202.. 78,0 56,0 0,5 193.281 170.027 6
14,5 14,5 15,5 2456911 DFR145R4WD20M DFR0202.. 82,0 58,0 0,5 193.281 170.027 6
15,0 15,0 16,0 2456912 DFR150R4WD20M DFR0202.. 84,0 60,0 0,5 193.281 170.027 6
15,5 15,5 16,5 2457733 DFR155R4WD20M DFR0202.. 86,0 62,0 0,5 193.281 170.027 6
16,0 16,0 17,0 2457734 DFR160R4WD20M DFR0202.. 88,0 64,0 0,5 193.281 170.027 6
16,5 16,5 17,5 2457735 DFR165R4WD32M DFR0302.. 95,0 66,0 0,6 192.416 170.023 7
17,0 17,0 18,0 2457736 DFR170R4WD32M DFR0302.. 97,0 68,0 0,6 192.416 170.023 7
17,5 17,5 18,5 2457737 DFR175R4WD32M DFR0302.. 99,0 70,0 0,6 192.416 170.023 7
18,0 18,0 19,0 2457738 DFR180R4WD32M DFR0302.. 101,0 72,0 0,6 192.416 170.023 7
18,5 18,5 19,5 2457739 DFR185R4WD32M DFR0302.. 103,0 74,0 0,6 192.416 170.023 7
19,0 19,0 20,0 2035319 DFR190R4WD32M DFR0302.. 105,0 76,0 0,6 192.416 170.023 7
19,5 19,5 20,5 2457741 DFR195R4WD32M DFR0302.. 107,0 78,0 0,6 192.416 170.023 7
20,0 20,0 21,0 1963407 DFR200R4WD32M DFR0302.. 109,0 80,0 0,6 192.416 170.023 7
20,5 20,5 21,5 2457743 DFR205R4WD32M DFR0403.. 111,0 82,0 0,7 192.432 170.028 8
21,0 21,0 22,0 2457744 DFR210R4WD32M DFR0403.. 113,0 84,0 0,7 192.432 170.028 8
22,0 22,0 23,0 2040139 DFR220R4WD32M DFR0403.. 117,0 88,0 0,7 192.432 170.028 8
23,0 23,0 24,0 2457746 DFR230R4WD32M DFR0403.. 121,0 92,0 0,7 192.432 170.028 8
25,0 24,0 25,0 2457747 DFR240R4WD32M DFR0403.. 125,0 96,0 0,7 192.432 170.028 8
Torx
Size
DRILL-FIX DFR 4xD
Get the security and dependability
of Kennametal DFR indexable drills
in a 4xD cutting depth.
Exceptional performance at higher
feed rates!
Available in metric diameter
whistle-notch shanks only.
Order example:
1x DFR175R3WD25M
10 x DFR020204GD
or by order number: 1 x 2498749
A40
To place an order, contact your Kennametal representative or visit www.kennametal.com.

DFR
DFR-GD
DFR-LD
DRILL-FIX DFR
Inserts
SOLID CARBIDE DRILLING
LI
Catalog number
W
10°
R
S
mm
LI
inch
mm
Dimensions
inch
mm
inch
First Choice
Alternate Choice
W S R
mm
inch
KC7020
KC7225
KC7140
HOLEMAKING
INDEXABLE DRILLING
DFR020204GD 7,12 .280 4,90 .193 2,79 .110 0,40 .016
DFR030204GD 8,71 .343 6,00 .236 2,88 .113 0,40 .016
DFR040304GD 10,76 .424 7,38 .291 3,79 .149 0,40 .016
DFR020204LD 7,12 .280 4,90 .193 2,79 .110 0,40 .016
DFR030204LD 8,71 .343 6,00 .236 2,88 .113 0,40 .016
DFR040304LD 10,76 .424 7,38 .291 3,79 .149 0,40 .016
H
S
N
K
M
P
MODULAR DRILLING
KENNA PERFECT – DRILL-FIX DFR
KENNA PERFECT
HSK MODBORE
A: Outer insert
I: Inner insert
Stable Normal Unstable
Interrupted
Cut
Steel
DFR…GD KC7140
DFR…GD KC7020
A: DFR…GD KC7140
I: DFR…LD KC7225
Stainless Steel
DFR…GD KC7020
A: DFR…GD KC7140
I: DFR…LD KC7225
ROMICRON
Cast Iron
DFR…LD KC7225
A: DFR…GD KC7020
I: DFR…LD KC7225
Non-Ferrous
Metals
DFR…LD KC7225
A: DFR…GD KC7020
I: DFR…LD KC7225
Super Alloys and
Titanium
A: DFR…GD KC7020
I: DFR…LD KC7225
Example:
Stable conditions
Material: GG25
DFR…LD KC7225
Order example:
1x DFR175R3WD25M
10 x DFR020204GD KC7020
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A41

ROMICRON
HSK MODBORE
INDEXABLE DRILLING
MODULAR DRILLING
SOLID CARBIDE DRILLING
HOLEMAKING
DRILL-FIX DFR
Cutting Data Recommendations
Cutting Groups
1.1
1.2
2.1
2.2
3
4
5
6
7
8
9
10
11
12
13
14.1
14.2
15
16
17
18
19
20
21
22
23
24
25
26
27
28
31
32
33
34
35
36
37
Material Group
Unalloyed Steel,
Cast Steel,
Machining Steel
Low-Alloy Steel,
Cast Steel,
Machining Steel
High-Alloy Steel,
Cast Steel, High-
Alloy Tool Steel
Stainless Steel,
Cast Steel
Stainless Steel
Gray Cast Iron
Cast Iron with
Nodular
Cast Iron
Malleable Cast
Iron
Aluminum
Forging Alloys
Aluminum
Casting Alloys
Copper and
Copper Alloys
(Bronze, Brass)
Heat-Resistant
Alloys
Titanium Alloys
C = 0,10 - 0,25 Annealed, long-chipping
C = 0,10 - 0,25 Annealed, short-chipping
C = 0,25 - 0,55 Annealed, long-chipping
C = 0,25 - 0,55 Annealed, short-chipping
C = 0,25 - 0,55 Tempered
C = 0,25 - 0,80 Annealed
C = 0,25 - 0,80 Tempered
Annealed
Tempered
Tempered
Tempered
Annealed
Hardened and Tempered
Ferritic/Martensitic
Martensitic
Austenitic
Austenitic/Ferritic (duplex)
Pearlitic/Ferritic
Pearlitic (Martensitic)
Ferritic
Pearlitic
Ferritic
Pearlitic
Not heat treatable
Heat treatable/Heat treated
Annealed
Tempered
1%
CuZn, CuSnZn
Cu, lead-free copper/electrolytic copper
Fe-based
Ni or Co-based
Cast
Pure Titanium
Composition /Structure
Alpha-Beta Alloys
Annealed
Heat treated
Annealed
Heat treated
Tensile Strength
RM (Mpa)
Hardness HB
420 125
420 125
640 190
640 190
850 250
915 270
1020 300
610 180
930 275
1020 300
1190 350
680 200
1100 325
680 200
810 240
610 180
880 260
180
260
160
250
130
230
60
100
75
90
130
110
90
100
200
230
250
350
320
400 55 HRC
1050 55 HRC
Cutting Speed vc:
(m/min)
(sfm)
Stable Normal Unstable
Feed Rate Per Revolution by Insert Size:
(mm/rev)
(ipr)
Interrupted
Cut DFR 02... DFR 03... DFR 04...
340 280 220 140 0,06 - 0,12 0,08 - 0,15 0,11 - 0,21
1120 920 720 460 .002 - .005 .003 - .006 .004 - .008
340 280 220 140 0,06 - 0,12 0,08 - 0,15 0,11 - 0,21
1120 920 720 460 .002 - .005 .003 - .006 .004 - .008
310 260 210 130 0,06 - 0,12 0,08 - 0,15 0,11 - 0,21
1020 850 690 430 .002 -.0045 .003 - .006 .004 - .008
340 280 220 140 0,06 - 0,12 0,08 - 0,15 0,11 - 0,21
1120 920 720 460 .002 - .005 .003 - .006 .004 - .008
310 260 210 130 0,05 - 0,10 0,06 - 0,12 0,10 - 0,18
1020 850 690 430 .002 - .004 .002 - .005 .004 - .007
300 250 200 130 0,05 - 0,10 0,06 - 0,12 0,10 - 0,18
980 820 660 430 .002 - .004 .002 - .005 .004 - .007
260 220 180 110 0,05 - 0,10 0,06 - 0,12 0,10 - 0,18
850 720 590 360 .002 - .004 .002 - .005 .004 - .007
310 260 210 130 0,06 - 0,12 0,08 - 0,15 0,11 - 0,21
1020 850 690 430 .002 - .005 .003 - .006 .004 - .008
280 230 180 120 0,06 - 0,12 0,08 - 0,15 0,11 - 0,21
920 750 590 390 .002 - .005 .003 - .006 .004 - .008
240 200 160 100 0,06 - 0,12 0,08 - 0,15 0,11 - 0,21
790 660 520 330 .002 - .005 .003 - .006 .004 - .008
220 180 140 90 0,06 - 0,12 0,08 - 0,15 0,11 - 0,21
720 590 460 300 .002 - .005 .003 - .006 .004 - .008
240 200 160 100 0,06 - 0,12 0,08 - 0,15 0,11 - 0,21
790 660 520 330 .002 - .005 .003 - .006 .004 - .008
190 160 130 80 0,05 - 0,09 0,05 - 0,10 0,08 - 0,16
620 520 430 260 .002 - .004 .002 - .004 .003 - .006
220 180 140 90 0,04 - 0,07 0,05 - 0,09 0,07 - 0,13
720 590 460 300 .002 - .003 .002 - .004 .003 - .005
190 160 130 80 0,03 - 0,06 0,04 - 0,07 0,05 - 0,10
620 520 430 260 .001 - .003 .002 - .003 .002 - .004
190 160 130 80 0,04 - 0,09 0,05 - 0,10 0,08 - 0,16
620 520 430 260 .002 - .004 .002 - .004 .003 - .006
190 160 130 80 0,04 - 0,09 0,05 - 0,10 0,08 - 0,16
620 520 430 260 .002 - .004 .002 - .004 .003 - .006
260 220 180 110 0,07 - 0,15 0,08 - 0,18 0,11 - 0,24
850 720 590 360 .003 - .006 .003 - .007 .004 - .009
220 180 140 90 0,07 - 0,15 0,08 - 0,18 0,11 - 0,24
720 590 460 300 .003 - .006 .003 - .007 .004 - .009
220 180 140 90 0,06 - 0,12 0,07 - 0,15 0,10 - 0,21
720 590 460 300 .002 - .005 .003 - .006 .004 - .008
180 150 120 80 0,06 - 0,12 0,07 - 0,15 0,10 - 0,21
590 490 390 260 .002 - .005 .003 - .006 .0039 - .008
240 200 160 100 0,06 - 0,12 0,07 - 0,15 0,10 - 0,21
790 660 520 330 .002 - .005 .003 - .006 .004 - .008
220 180 140 90 0,06 - 0,12 0,07 - 0,15 0,10 - 0,21
720 590 460 300 .002 - .005 .003 - .006 .004 - .008
720 600 480 300 0,03 - 0,06 0,04 - 0,07 0,06 - 0,09
2360 1970 1570 980 .001 - .002 .002 - .003 .002 - .004
720 600 480 300 0,03 - 0,06 0,04 - 0,07 0,06 - 0,09
2360 1970 1570 980 .001 - .002 .002 - .003 .002 - .004
720 600 480 300 0,07 - 0,10 0,09 - 0,14 0,12 - 0,18
2360 1970 1570 980 .003 - .004 .004 - .006 .005 - .007
600 500 400 250 0,07 - 0,10 0,09 - 0,14 0,12 - 0,18
1970 1640 1310 820 .003 - .004 .004 - .006 .005 - .007
480 400 320 200 0,07 - 0,10 0,09 - 0,14 0,12 - 0,18
1570 1310 1050 660 .003 - .004 .004 - .006 .005 - .007
600 500 400 250 0,07 - 0,10 0,09 - 0,14 0,12 - 0,18
1970 1640 1310 820 .003 - .004 .004 - .006 .005 - .007
600 500 400 250 0,07 - 0,10 0,09 - 0,14 0,12 - 0,18
1970 1640 1310 820 .003 - .004 .004 - .006 .005 - .007
480 400 320 200 0,07 - 0,10 0,09 - 0,14 0,12 - 0,18
1570 1310 1050 660 .003 - .004 .004 - .006 .005 - .007
70 60 50 30 0,03 - 0,06 0,04 - 0,07 0,05 - 0,10
230 200 160 100 .001 - .002 .002 - .003 .002 - .004
70 60 50 30 0,03 - 0,06 0,04 - 0,07 0,05 - 0,10
230 200 160 100 .001 - .002 .002 - .003 .002 - .004
60 50 40 30 0,03 - 0,06 0,04 - 0,07 0,05 - 0,10
200 160 130 100 .001 - .002 .002 - .003 .002 - .004
60 50 40 30 0,03 - 0,06 0,04 - 0,07 0,05 - 0,10
200 160 130 100 .001 - .002 .002 - .003 .002 - .004
60 50 40 30 0,03 - 0,06 0,04 - 0,07 0,05 - 0,10
200 160 130 100 .001 - .002 .002 - .003 .002 - .004
100 80 60 40 0,03 - 0,06 0,04 - 0,07 0,05 - 0,10
330 260 200 130 .001 - .002 .002 - .003 .002 - .004
70 60 50 30 0,03 - 0,06 0,04 - 0,07 0,05 - 0,10
230 200 160 100 .001 - .002 .002 - .003 .002 - .004
A42
To place an order, contact your Kennametal representative or visit www.kennametal.com.

HTS Cartridges with SPHX Inserts
Exterior Cartridge Version!
NEW
SOLID CARBIDE DRILLING
D1
D D5
Drill Head Pilot Drill Inserts Cartridges Cartridges
D1
min. max.
Catalog number
D5
D
Number of
Inserts
45 - 50 3.76045R028V 28 13 B510S08000... DFT0303... 3 SPHX0703... 1 3.77000R250V 3) 1 3.77000R251V 1
50 - 55 3.76050R028V 28 13 B510S08000... DFT0303... 3 SPHX0703... 1 3.77000R252V 3) 1 3.77000R253V 1
55 - 58 3.76055R032V 32 16 B510S08000... DFT05T3... 3 SPHX0903... 1 3.77000R038V 1 3.77000R239V 1
58 - 63 3.76058R032V 32 16 B510S10000... DFT05T3... 3 SPHX0903... 1 3.77000R023V 1 3.77000R224V 1
63 - 68 3.76063R032V 32 16 B510S10000... DFT05T3... 3 SPHX0903... 1 3.77000R025V 1 3.77000R224V 1
63 - 68 3.76063R040V 1) 40 22 B510S10000... DFT05T3... 3 SPHX0903... 1 3.77000R025V 1 3.77000R224V 1
68 - 73 3.76068R040V 40 22 B510S10000... DFT05T3... 3 SPHX0903... 1 3.77000R026V 1 3.77000R227V 1
73 - 78 3.76073R040V 40 22 B510S15000... DFT05T3... 3 SPHX0903... 1 3.77000R026V 1 3.77000R227V 1
78 - 84 3.76078R040V 40 22 B510S15000... DFT06T3... 3 SPHX0903... 1 3.77000R028V 1 3.77000R229V 1
78 - 84 3.76078R048V 1) 48 27 B510S15000... DFT06T3... 3 SPHX0903... 1 3.77000R028V 1 3.77000R229V 1
84 - 90 3.76084R048V 48 27 B510S15000... DFT06T3... 3 SPHX0903... 1 3.77000R228V 3) 1 3.77000R229V 1
90 - 94 2) 3.76090R048V 48 27 B510S15000... DFT06T3... 3 SPHX0903... 1 3.77000R230V 2) 3) 1 3.77000R231V 1
96 - 100 2) 3.76096R048V 48 27 B510S20000... DFT06T3... 3 SPHX0903... 1 3.77000R230V 2) 3) 1 3.77000R231V 1
96 - 100 2) 3.76096R058V 1) 58 32 B510S20000... DFT06T3... 3 SPHX0903... 1 3.77000R230V 2) 3) 1 3.77000R231V 1
102 - 108 3.76102R058V 58 32 B510S20000... DFT05T3... 5 SPHX0903... 1 3.77000R081V 1 3.77000R282V 1
108 - 115 3.76108R058V 58 32 B510S20000... DFT06T3... 5 SPHX1204... 1 3.77000R083V 1 3.77000R284V 1
115 - 122 3.76115R070V 70 40 B510S20000... DFT06T3... 5 SPHX1204... 1 3.77000R085V 1 3.77000R286V 1
122 - 130 3.76122R070V 70 40 B510S25000... DFT06T3... 5 SPHX1204... 1 3.77000R079V 1 3.77000R280V 1
130 - 140 3.76130R070V 70 40 B510S25000... DFT06T3... 5 SPHX1204... 1 3.77000R087V 1 3.77000R288V 1
140 - 150 3.76140R080V 80 50 B510S25000... DFT0704... 5 SPHX1505... 1 3.77000R077V 1 3.77000R278V 1
150 - 158 3.76150R080V 80 50 B510S25000... DFT0704... 5 SPHX1505... 1 3.77000R075V 1 3.77000R276V 1
158 - 162 3.76158R080V 80 50 B510S25000... DFT0704... 5 SPHX1505... 1 3.77000R073V 1 3.77000R274V 1
162 - 170 3.76162R080V 80 50 B510S30000... DFT0704... 5 SPHX1505... 1 3.77000R248V 3) 1 3.77000R249V 1
180 - 184 2) 3.76180R110 110 60 B510S30000... DFT06T3... 7 SPHX0903... 1 3.77000R230V 2) 3) 3 3.77000R231V 1
195 - 201 3.76195R110 110 60 B510S30000... DFT05T3... 11 SPHX0903... 1 3.77000R081V 3 3.77000R282V 1
213 - 220 3.76213R125 125 60 B510S30000... DFT06T3... 11 SPHX1204... 1 3.77000R083V 3 3.77000R284V 1
230 - 240 3.76230R160 160 80 B510S30000... DFT06T3... 11 SPHX1204... 1 3.77000R079V 2 3.77000R080V 1 3.77000R280V 1
Number of
Inserts
1) Drill heads with reinforced body for short-chipping materials.
2) Decreased diameter range due to SPHX insert in exterior cartridges.
3) Modified interior cartridge, for use together with SPHX equipped exterior cartridges only.
Interior
Number of
Cartridges
Exterior
Number of
Cartridges
NEW
Exterior
SPHX
Number of
Cartridges
MODULAR DRILLING
HOLEMAKING
INDEXABLE DRILLING
HSK MODBORE
ROMICRON
HTS Exterior Cartridges with SPHX Inserts
Greatly increase process security
with new square insert design.
Get better workpiece surface finishes!
Use standard components in existing HTS heads
for most cutting diameters!
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A43

SOLID CARBIDE DRILLING
Inserts
NEW
TPGX for KSEM/KenTIP Chamfering Tools
60°
NEW
New Grades
MODULAR DRILLING
INDEXABLE DRILLING
HOLEMAKING
M D
R
Catalog number
61°
11°
S
M
H
Dimensions S
N
First Choice
Alternate Choice
K
M
P
D S R
mm inch mm inch mm inch mm inch
KC7015
KC7140
KC7315
TPGX0902ZPRGD 6,00 .236 5,56 .219 2,38 .094 0,2 .008
TPGX1102ZPRGD 7,00 .276 6,35 .250 2,38 .094 0,2 .008
TPGX1303ZPRGD 8,75 .344 7,94 .313 3,18 .125 0,4 .016
TPGX1603ZPRGD 10,50 .413 9,52 .375 3,18 .125 0,4 .016
HSK MODBORE
WOGX for Small-Size HTS-C Drilling Tools
NEW
New Grades
84°
D
ROMICRON
R
L10
8°
S
Catalog number
L10
Dimensions
First Choice
Alternate Choice
D S R
mm inch mm inch mm inch mm inch
H
S
N
K
M
P
KC7140
KC7215
WOGX03020424 6,00 .236 3,97 .156 2,50 .098 0,40 .016
Order example:
10 x TPGX0902ZPRGD
10 x WOGX03020424
A44
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Get the metalcutting industry’s most experienced and reliable technical
and product application advice! Our problem-solving / troubleshooting
professionals are available to ensure that your Kennametal tools provide
optimum performance.
Visit us online at
www.kennametal.com
to find your local contact.
A45

SOLID CARBIDE DRILLING
HSK ModBORE – Twin Cutter for Rough Machining and Pre-Finishing
Twin cutter boring head RBHT
Set of insert holders for simultaneous adjustment
Insert holder for splitting depth of cut
(staggered)
MODULAR DRILLING
D1
90°
metric
D2
L2
L1
RBHT
HSK63A
D1
D1
INDEXABLE DRILLING
HOLEMAKING
min.
mm
max.
D1
inch
min. max.
Order Catalog
number number
L1 D2 L2
Insert Holder
90°
23,5 30,5 .925 1.201 2652856 HSK63RBHT2490 90 20 62 B24RBHT06F CC..0602... CC..215...
29,5 40,0 1.161 1.575 2652857 HSK63RBHT30105 105 25 77 B24RBHT06F CC..0602... CC..215...
39,5 50,5 1.555 1.988 2652858 HSK63RBHT40110 110 32 82 B24RBHT09F CC..09T3... CC..325...
49,5 66,5 1.949 2.618 2652860 HSK63RBHT50120 120 42 92 B24RBHT09F CC..09T3... CC..325...
65,5 87,5 2.579 3.445 2652861 HSK63RBHT66125 125 55 123 B66RBHT12F CC..1204... CC..43...
86,5 115,5 3.406 4.547 2652862 HSK63RBHT87145 145 72 143 B87RBHT12F CC..1206... CC..43...
ISO
Insert
ANSI
metric
SYB-K 90° Set of insert holders for simultaneous adjustment
HSK MODBORE
min.
mm
max.
D1
inch
min. max.
Order
number
Catalog
number
Boring Head
RBHT
23,5 30,5 .925 1.201 2652965 SYB24RBHT06F HSK63FBHS2490 CC..0602... CC..215...
29,5 40,0 1.161 1.575 2652967 SYB30RBHT06F HSK63FBHS31105 CC..0602... CC..215...
39,5 50,5 1.555 1.988 2652968 SYB40RBHT09F HSK63FBHS40110 CC..09T3... CC..325...
49,5 66,5 1.949 2.618 2652969 SYB50RBHT09F HSK63FBHS51120 CC..09T3... CC..325...
65,5 87,5 2.579 3.445 2652970 SYB66RBHT12F HSK63FBHS67125 CC..1204... CN..43...
86,5 115,5 3.406 4.547 2652972 SYB87RBHT12F HSK63FBHS87145 CC..1204... CN..43...
ISO
Insert
ANSI
metric
STB- 90° Insert holder for splitting depth of cut
ROMICRON
min.
mm
max.
D1
inch
min. max.
Order
number
Catalog
number
Boring Head
RBHT
23,5 30,5 .925 1.201 2652987 STB24RBHT06F HSK63FBHS2490 CC..0602... CC..215...
29,5 40,0 1.161 1.575 2652995 STB30RBHT06F HSK63FBHS31105 CC..0602... CC..215...
39,5 50,5 1.555 1.988 2652997 STB40RBHT09F HSK63FBHS40110 CC..09T3... CC..325...
49,5 66,5 1.949 2.618 2652998 STB50RBHT09F HSK63FBHS51120 CC..09T3... CC..325...
65,5 87,5 2.579 3.445 2652999 STB66RBHT12F HSK63FBHS67125 CC..1204... CC..43...
86,5 115,5 3.406 4.547 2653001 STB87RBHT12F HSK63FBHS87145 CC..1204... CC..43...
ISO
Insert
ANSI
Splitting depth machining
insert holder
RBHT
insert holder
STB
0,4 offset
Order example:
Completely equipped Twin cutter boring head RBHT
1 x HSK63RBHT2490
A46
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Assembling the boring head for synchronized machining
Operating Instructions
For the “ST System“ – Rough Boring Head with 2 Cutting Edges
SOLID CARBIDE DRILLING
right
1
2
left
MODULAR DRILLING
Push central ring (1) toward the center
of the synchronization screw (2).
The hexagonal part on the inner side
of the synchronization screw has a
right-hand thread on one side and a
left-hand thread on the opposite side.
Tighten one of the 3 screws of the
central ring (1).
The toolholders have dots: one dot
for right-hand threads and 2 dots for
left-hand threads.
HOLEMAKING
INDEXABLE DRILLING
3
HSK MODBORE
Insert the central ring together with
the synchronization screw into the
central bore. Align the toolholder with
left-hand thread (2 dots), moving it
towards the synchronization screw. The
inner hexagon has to be opposite the
toolholder (3).
Align the second toolholder by moving it
toward the screw. Now turn the screw
with the key until at least one toolholder
contacts the central ring.
Adjustment
Remove the previously fixed screw
of the central ring. Now turn the
synchronization screw until both
toolholders touch the central ring.
Splitting depth machining
ROMICRON
4
Now the toolholders are in a central
position. Tighten the 3 screws of the
central ring. Mount clamping screws (4)
and tighten them slightly. The head is
now ready for synchronized machining.
Set bore diameter with the setting key
and fix the two clamping screws.
(Presetting equipment is necessary.)
The toolholders for splitting depth
machining are black finished and their
z-axis has an offset of 0,4 mm (.016 inch).
They are identified with a right-hand
thread and have 3 dots.
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A47

SOLID CARBIDE DRILLING
HSK ModBORE – Single Cutter – Fine Boring Tool
FBHS 90°
R-FBHS Cartridges 90°
MODULAR DRILLING
INDEXABLE DRILLING
HOLEMAKING
HSK MODBORE
D1
90°
L2
metric FBHS 90° Fine Boring Tool
including cartridge
D1
mm
inch
min. max. min. max.
D2
L1
HSK63A
Extension Items 90°
Order Catalog
number number
L1 D2 L2
D1
Cartridge
90°
90°
11
Possible
Extension
24 31 .954 1.220 2649392 HSK63FBHS2490 90 20 60 R24FBHS06 CC...0602... CC..215... 30 - 37
31 40 1.220 1.575 2649543 HSK63FBHS31105 105 25 75 R31FBHS06 CC...0602... CC..215... 38 - 47
40 51 1.575 1.614 2649544 HSK63FBHS40110 110 32 80 R40FBHS06 CC...0602... CC..215... 48 - 59
51 67 2.008 2.638 2649545 HSK63FBHS51120 120 42 90 R51FBHS06 CC...0602... CC..215... 65 - 81
67 87 2.638 3.425 2649546 HSK63FBHS67125 125 55 95 R67FBHS09 CC...09T3... CC..325... 85 - 105
87 116 3.425 4.657 2649547 HSK63FBHS87145 145 72 119 R67FBHS09 CC...09T3... CC..325... 125 - 154
metric
Extension Items
D1
mm
min. max.
R-FBHS 90° Cartridges
inch
min. max.
Order
number
Catalog
number
Fine Boring Head
30 37 1.181 1.457 2649548 R30FBHS06 HSK63FBHS2490 CC...0602... CC..215...
38 47 1.496 1.850 2649549 R38FBHS06 HSK63FBHS31105 CC...0602... CC..215...
48 59 1.890 2.323 2649550 R48FBHS06 HSK63FBHS40110 CC...0602... CC..215...
65 81 2.559 3.189 2649551 R65FBHS06 HSK63FBHS51120 CC...0602... CC..215...
67 87 2.638 3.425 1834274 R67FBHS06 HSK63FBHS67125 CC...0602... CC..215...
85 105 3.346 4.134 2649552 R85FBHS06 HSK63FBHS67125 CC...0602... CC..215...
85 105 3.346 4.134 2649553 R85FBHS09 HSK63FBHS67125 CC...09T3... CC..325...
125 154 4.921 6.063 2649554 R125FBHS09 HSK63FBHS87145 CC...09T3... CC..325...
ISO
Insert
ISO
ANSI
Insert
ANSI
ROMICRON
Order example:
Completely equipped FBHS single cutting tool
1x HSK63FBHS2490
A48
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Cartridge 95° (for wiper insert)
HSK ModBORE – Single Cutter – Fine Boring Tool
SOLID CARBIDE DRILLING
metric Cartridge 95°
D1
95°
11
MODULAR DRILLING
min.
mm
max.
D1
inch
min. max.
Reversal adapter for back boring
Order
number
Catalog
number
Fine Boring Head
24 31 .945 1.220 2649555 R24FBHS06LF HSK63FBHS2490 CC...0602... CC..215...
31 40 1.220 1.575 2649556 R31FBHS06LF HSK63FBHS31105 CC...0602... CC..215...
40 51 1.575 1.614 2649556 R40FBHS06LF HSK63FBHS40110 CC...0602... CC..215...
51 67 2.006 2.638 2649558 R51FBHS06LF HSK63FBHS51120 CC...0602... CC..215...
67 87 2.638 3.425 2649559 R67FBHS06LF HSK63FBHS67125 CC...09T3... CC..325...
ISO
Insert
ANSI
The reversal adapter enables the cartridge to be fitted in
a 180° turned position, to allow back boring.
HOLEMAKING
INDEXABLE DRILLING
BR1
metric
Reversal Adapter
L3
HSK MODBORE
BR1
mm
inch
min. max. min. max.
Order
number
Catalog number
Insert Holder
Fine Boring Head
37 44 1.457 1.732 2649560 R37FBHSRB HSK63FBHS2490 37,0
40 51 1.575 2.008 2649561 R40FBHSRB HSK63FBHS2490 37,0
44 53 1.732 2.087 2649562 R44FBHSRB HSK63FBHS31105 50,3
51 60 2.008 2.362 2649563 R51FBHSRB HSK63FBHS31105 50,3
53 64 2.087 2.520 2649564 R53FBHSRB HSK63FBHS40110 50,3
60 71 2.362 2.795 2649565 R60FBHSRB HSK63FBHS40110 50,3
64 80 2.520 3.150 2649566 R64FBHSRB HSK63FBHS51120 53,2
75 91 2.953 3.583 2649567 R75FBHSRB HSK63FBHS51120 53,2
87 107 3.425 4.213 2649568 R87FBHSRB HSK63FBHS67125 46,0
L3
ROMICRON
Order example:
1x R24FBHS06LF
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A49

SOLID CARBIDE DRILLING
HSK ModBORE – Precision Boring Bars for FBHO Fine Boring Tools
AFB Boring Bar
FBHO
Single cutter for fine boring
tool with internal coolant
supply
max. adjustment range 2,5 mm (.098’’)
D1
D
D2 D1
HSK63A
MODULAR DRILLING
metric
AFB Boring Bar
L4
L1
L1
INDEXABLE DRILLING
HOLEMAKING
D1
mm
inch
min. max. min. max.
Order
number
Catalog
number
D L4 L1
9,75 15,1 .384 .594 1125110 AFB09075SCFCR06 16 30 75,0 CC...0602... CC..215...
13,75 19,1 .541 .752 1133883 AFB13085SCFCR06 16 40 85,0 CC...0602... CC..215...
17,75 23,1 .699 .909 1133894 AFB17100SCFCR06 16 55 100,0 CC...0602... CC..215...
21,75 27,1 .656 1.067 1137835 AFB21110SCFCR09 16 60 110,0 CC...09T3... CC..325...
24,75 30,1 .974 1.185 1128324 AFB24115SCFCR09 16 65 115,0 CC...09T3... CC..325...
27,75 33,1 1.093 1.303 1126838 AFB27115SCFCR09 16 85 115,0 CC...09T3... CC..325...
31,75 37,1 1.250 1.461 1120731 AFB31115SCFCR09 16 85 115,0 CC...09T3... CC..325...
34,75 40,1 1.368 1.579 1127271 AFB34115SCFCR09 16 85 115,0 CC...09T3... CC..325...
38,75 44,1 1.526 1.736 2651038 AFB38115SCFCR09 16 85 115,0 CC...09T3... CC..325...
42,75 48,1 1.683 1.894 2651039 AFB42115SCFCR09 16 85 115,0 CC...09T3... CC..325...
47,75 53,1 1.880 2.091 2651040 AFB47115SCFCR09 16 85 115,0 CC...09T3... CC..325...
ISO
Insert
ANSI
metric
FBHO Boring Head
HSK MODBORE
Order number Catalog number L1 D1 D2
2651037 HSK63FBHO1695 95 16 55
ROMICRON
Order example:
1x HSK63FBHO1695
A50
To place an order, contact your Kennametal representative or visit www.kennametal.com.

High-Speed Boring Head
HSK ModBORE – High-Speed Fine Boring Tools
High-Speed Fine Boring Head
Solid Carbide Shank for High-Speed Boring Heads
SOLID CARBIDE DRILLING
metric
D1 D2
D1
D2
D1
L1
L1 assembly
High-Speed Boring Head
L1
MODULAR DRILLING
min.
mm
max.
D1
inch
min. max.
Order
number
Catalog
number D2 L1
High-Speed
Boring Bar
10,75 16,00 .423 .630 2651168 HFB1023SCFPR06 10 23,0 CFB10082 CC...0602... CC..215...
12,75 18,10 .502 .713 2651169 HFB1223SCFPR06 12 23,0 CFB12096 CC...0602... CC..215...
16,75 22,10 .659 .870 2651170 HFB1627SCFPR06 16 27,0 CFB16120 CC...0602... CC..215...
21,75 27,10 .856 1.067 2651171 HFB2127SCFPR06 16 27,0 CFB16120 CC...0602... CC..215...
24,75 30,10 .974 1.185 2651172 HFB2427SCFPR06 16 27,0 CFB16120 CC...0602... CC..215...
27,75 33,10 1.093 1.303 2651173 HFB2727SCFPR06 16 27,0 CFB16120 CC...0602... CC..215...
31,75 37,10 1.250 1.461 2651174 HFB3127SCFPR06 16 27,0 CFB16120 CC...0602... CC..215...
34,75 40,10 1.368 1.579 2651175 HFB3427SCFPR06 16 27,0 CFB16120 CC...0602... CC..215...
ISO
Insert
ANSI
HOLEMAKING
INDEXABLE DRILLING
metric
High-Speed Fine Boring Head
D1
mm
inch
min. max. min. max.
Order
number
Catalog
number
D2
L1
assembly
High-Speed
Boring Bar
Insert
Holder
14,70 17,10 .579 .673 2651176 HFB14FBHS1440 14 40,0 CFB14110 R14FBHS02 WC..0201.. WC..0201..
16,70 20,10 .857 .791 2651177 HFB16FBHS1640 16 40,0 CFB16120 R14FBHS02 WC..0201.. WC..0201..
19,70 24,10 .778 .949 2651178 HFB19FBHS1840 18 40,0 CFB18140 R14FBHS02 WC..0201.. WC..0201..
ISO
Insert
ANSI
HSK MODBORE
metric
Solid Carbide Shank for
High-Speed Boring Heads
D1
Order
number
Catalog
number
10 2651163 CFB10082 82
12 2651164 CFB12096 96
14 2651165 CFB14110 110
16 2651166 CFB16120 120
18 2651167 CFB18140 140
L1
ROMICRON
Cartridge for fine boring head
metric
Cartridge for
Fine Boring Head
Order
Catalog
number number Insert
2651179 R14FBHS02 WC..0201..
Order example:
1x CFB10082
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A51

SOLID CARBIDE DRILLING
HSK ModBORE – High-Speed Fine Boring Tools
RS Reducers
High-Speed Boring Bar
MODULAR DRILLING
metric
D1
RS Reducer
D
D1
L4
L1
D2
INDEXABLE DRILLING
HOLEMAKING
D1
Order
number
Catalog
number
5 2651042 RS1605 16
6 1125092 RS1606 16
8 1133914 RS1608 16
10 1135642 RS1610 16
12 1135662 RS1612 16
metric
High-Speed Solid Carbide Boring Bar
D1
mm
inch
min. max. min. max.
D
Order number
Catalog number D2 L4 L1 Insert
5,80 11,20 .228 .441 2651041 EFB05045WCGT02 5 45 80,0 WC..0201..
ROMICRON
HSK MODBORE
A52
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Inserts
ModBORE Inserts
SOLID CARBIDE DRILLING
80°
Rε
D
metric
L10
Catalog number
7°
S
D1
D
Dimensions
mm inch mm inch mm inch
mm
First Choice
Alternate Choice
L10 S D1 Rε
WCMT020102 3,97 5/32 2,72 .107 1,59 1/16 2,3 .091 0,2 .008
WCGT020102 3,97 5/32 2,72 .107 1,59 1/16 2,3 .091 0,2 .008
inch
mm
H
S
N
K
M
P
inch
KT608
K610
MODULAR DRILLING
HOLEMAKING
INDEXABLE DRILLING
Romicron Wiper Inserts
HSK MODBORE
NEW
D
D1
Rε
L10
11°
S
ROMICRON
metric
ISO
Catalog number
ANSI
Catalog number
mm
D
inch
mm
inch
Dimensions
mm
inch
mm
First Choice
Alternate Choice
L10 S D1 Rε
inch
mm
H
S
N
K
M
P
inch
KC5410
CPGT060204FWL20 CPGT2151WL20 6,35 .25 6,45 .254 2,38 .094 2,85 .112 0,40 .0157
Wiper insert for cardridges with 90 degree lead angle.
Chip former geometry specially developed for high speed machining of aluminium.
Excellent even for long extensions, as cutting forces are led in axial direction.
Order example:
1x RS1605
10 x WCGT020102
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A53

SOLID CARBIDE DRILLING
Romicron ® Universal Application
Use with SVUBB2 Boring Head 25,5 mm -100,0 mm (1.003"- 3.937")
Accessories – Typical assembly for different diameters
MODULAR DRILLING
16
(.630)
56,3 mm (2.204")
25,5
33,5
25,5-33,5 mm
1.003-1.318"
33,5
43,5
33,5-43,5 mm
1.318-1.712"
mark
KRDEA046AM
KRDE025010M
KRDE033010M
INDEXABLE DRILLING
HOLEMAKING
Ø 25,5 - 43,5 mm (Ø 1.003" - 1.712")
61 mm (2.401")
HSK MODBORE
43
16
(.630)
65
43-65 mm
1.692-2.559"
mark
KRDEA051AM
KRDE043010M
ROMICRON
Ø 43,0 - 65,0 mm (Ø 1.692" - 2.559")
24 mm (.944")
mark
ø 65
ø 100
ø 65-100 mm
ø 2.559-3.937"
16
(.630)
KRDE065012M
KRCW032A
Ø 65,0 - 100,0 mm (Ø 2.559" - 3.937")
KRDEA012AM
Used Above
DIA. 79,5 mm
(3.219")
A54
To place an order, contact your Kennametal representative or visit www.kennametal.com.

L
L1
Romicron ® Universal Application
Use with SVUBB2 Boring Head 25,5 mm -100,0 mm (1.003"-3.937")
L
L1
L1
G
SOLID CARBIDE DRILLING
G BR1
G BR1
BR1
Accessories – Adapters
L
M4 x 0,7
MODULAR DRILLING
BR1
mm
inch
min. max. min. max.
Order
number
Catalog
D5
G
number mm inch mm inch
L1
mm inch
mm
L
inch
Weight
Kg lbs.
Clamping
Screw
25,5 43,5 1.004 1.713 2541200 KRDEA046AM 24,0 .945 16,0 .629 46,4 1.827 76,4 3.000 0,205 .50 M4 x 0,7
43,0 65,0 1.700 2.560 2541201 KRDEA051AM 25,0 .985 16,0 .629 51,7 2.035 81,7 3.217 0,235 .52 M6 x 1
65,0 100,0 2.560 3.937 2541202 KRDEA012AM 63,5 2.500 16,0 .629 12,5 .492 42,5 1.673 0,190 .42 M8 x 1,25
F
F
HOLEMAKING
INDEXABLE DRILLING
F
F
*
Accessories –
Diameter Extenders
Dmin.-max.
mm inch
min. max. min. max.
Order
number
*
*
Catalog
F
Adjustment Range
*Axial Weight
number mm inch mm inch Kg lbs. Adapter Insert
Screw
for
Insert Wrench Torx
25,5 33,5 1.004 1.319 2541213 KRDE025010M 10 .394 4,0 .157 0,015 .04 KRDEA046AM CPGT060204 MS1153 FT7 7
33,5 43,5 1.319 1.713 2541214 KRDE033010M 10 .394 5,0 .197 0,020 .05 KRDEA046AM CPGT060204 MS1153 FT7 7
43,0 65,0 1.700 2.560 2541215 KRDE043010M 10 .394 11,0 .433 0,030 .07 KRDEA051AM CPGT060204 MS1153 FT7 7
65,0 100,0 2.560 3.937 2541216 KRDE065012M 12 .472 17,5 .689 0,045 1.00 KRDEA012AM CPGT060204 MS1153 FT7 7
*
HSK MODBORE
ROMICRON
B
L2
H
Accessories – Counter Weight
Order Catalog
B
H
L2
Weight
Clamping
number number mm inch mm inch mm inch Kg lbs. Adapter
Screw
2541217 KRCW032A 18 .709 22 .866 12 .472 0,035 .080 KRDEA012AM M4 x 0,7
Note:
For inserts, see page A53.
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A55

Romicron ® Modular System
SOLID CARBIDE DRILLING
from Ø 40,0 mm (Ø 1.575")
Front mounting
KRMSVS00MF0039M
Application:
Minimum Diameter = 40 mm (1.525")
Insert Cartridge KRCSCFPR062L
38,7
Ø 20
MODULAR DRILLING
20,5 max.
19,9 min.
INDEXABLE DRILLING
HOLEMAKING
Front mounting
KRMSVS500MF60055M
Application:
Minimum Diameter = 60 mm (2.36")
Insert Cartridge KRCSCFPR061M
57
26
15,95 max.
15,15 min.
HSK MODBORE
Radial mounting
KRMSVS00M50049M
Application:
Minimum Diameter = 50 mm (1.969")
Insert Cartridge KRCSCZPR061M
50
25,625 max.
25,175 min.
ROMICRON
Radial mounting
KRMSVS00M055M
Application:
Minimum Diameter = 60 mm (2.362")
Insert Cartridge KRCSCFPR061M
55
27,85 max.
27,35 min.
Radial mounting
KRMSVS2M100080M
Application:
Minimum Diameter = 100 mm (3.937")
Insert Cartridge KRCSCFPR0610
80
48,5 max.
47,5 min.
A56
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Radial Model Example 1
Economc solution to machine a specific
diameter, which can be machined to the
customer’s requirements.
Romicron ® Modular System
from Ø 40,0 mm (Ø 1.575")
Example 2
Special bar to machine seven diameters in the
same operation.
SOLID CARBIDE DRILLING
Frontal Model
MODULAR DRILLING
Radial Mounting
Modular Unit (Cartridges included)
D1
mm
inch Order
min. max. min. max. number
Catalog
Weight
number Kg lbs.
50 .... 1.968 ... 2541218 KRMSVS00M50049M 0,17 .400
60 .... 2.362 ... 2202444 KRMSVS00M055M 0,25 .600
100 .... 3.497 ... 2541219 KRMSVS2M100080M 0,97 2.100
HOLEMAKING
INDEXABLE DRILLING
Accessories – Cartridges (Spare Part)
Order
number
Catalog
Use with
Weight
number modular Unit
Kg lbs. Insert
Screw for
Insert
2541220 KRCSCFPR061N KRMSVS00M50049M 0,010 .020 CPGT060204 MS1153 FT7 7
2202449 KRCSCFPR061M KRMSVS00M055M 0,015 .030 MS1153 FT7 7
2541221 KRCSCFPR0610 KRMSVS2M100080M 0,600 .026 MS1153 FT7 7
Driver
Torx
HSK MODBORE
Axial Mounting
Modular Unit (Cartridges included)
D1
mm
inch
min. max. min. max.
Order
number
Catalog
Weight
number Kg lbs.
40 .... 1.575 ... 2541222 KRMSVS00MF40039M 0,02 .500
60 .... 2.369 ... 2541223 KRMSVS00MF60055M 0,25 .600
ROMICRON
Accessories – Cartridges (Spare Part)
Order
number
Catalog
Use with
Weight
number modular Unit
Kg lbs. Insert
Screw for
Insert Driver Torx
1500650 KRCSCFPR062L KRMSVS00MF40039M 0,015 .030 CPGT060204 MS2005 FT7 7
2202449 KRCSCFPR061M KRMSVS00MF60055M 0,015 .030 MS2005 FT7 7
Note:
Inserts see page A53
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A57

SOLID CARBIDE DRILLING
Romicron ® Modular System
from Ø 40,0 mm (Ø 1.575")
Mounting Dimensions – Axial model KRMSVS00MF40039M
MODULAR DRILLING
13,5 (.531")
4,96 (.195")
A
20°
2,0 +0,150
(.079" )
+0,050
+.006
section
A-A
2 (.079")
17,0 +0,20
0
(.669"
+.008 )
0
22,2 (.874")
2 (.079")
INDEXABLE DRILLING
HOLEMAKING
ø 2 (.079")
A 15,5 (.61")
31,0 (1.22")
+.002
13,63
(.536")
ø 3,3 (.13") x 12,0 (.472")
M4 x 0,7-6H x 10,0 (.394")
A
ø 20,5
(.807")
ø 20,0 H7
0,8
(.787" H7)
0,8
0,0200 A
mean dimension
20,2 (.795")
20,45 max. (.8051")
19,95 min. (.7854")
HSK MODBORE
Dimensions in mm (inches)
Mounting Dimensions – Axial model KRMSVS00MF60055M
ROMICRON
ø 3 (.118")
14,5 (.571")
38,4 (1.512")
31,8 (1.251")
3 (.118")
0,8
26,0 (1.022")
(.0012")
0,030 A
0,020
(.0008")
mean dimen.
15,55 (.612")
45° (2x)
3,4 (.133")
16,5 (.65")
22,5 +0,300
0
( .886" +.012 )
0
13,7 0
-0,150
( .539" -.006 )
0
ø 23,5 H7
(.925" H7)
60°
A
M4 x 0,7 (3 x)
(.628")
15,95 max.
15,15 min.
(.596")
R5 (.197")
30 (1.181")
Dimensions in mm (inches)
A58
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Mounting Dimensions – Radial Models
30°
A
B
30°
Romicron ® Modular System
from Ø 40,0 mm (Ø 1.575")
I +0,30 ( +.0118" )
0 0
"A"
J
K Detail "A"
T
S
SOLID CARBIDE DRILLING
0,8
U
( 0 ) -.0078"
G -0,20
0
0,8
C
D
Q H7
P +0,30 ( +.0118" )
0 0
R
( +.0078" )
0
V
L +0,20
0
MODULAR DRILLING
F
H
0,020
(.00078")
0,8
Dimensions
E
2x
KRMSVS00M50049M
inch
mm
KRMSVS00M055M
inch mm
KRMSVS2M100080M
inch mm
A .067 1,7 .067 1,7 .157 4,0
B .492 12,5 .590 15,0 1.385 22,7
C .570 14,5 .623 14,5 1.102 28,0
D (mean dimension) 1.000 25,4 1.086 27,6 1.889 48,0
E M4 x 0,7 M4 x 0,7 M8 x 1,25
F .433 11,0 .472 12,0 .984 25,0
G .059 1,5 .059 1,5 .590 1,5
H .314 8,0 .393 10,0 .866 22,0
I 1.496 40,0 1.633 41,5 2.322 59,0
J .944 25,5 .964 24,0 1.338 34,0
K .118 3,0 .118 3,0 .157 4,0
L 1.161 29,5 1.200 30,5 2.165 55,0
M .472 12,0 .669 15,0 .964 24,5
N .787 20,0 .826 21,0 1.220 31,0
O .275 7,0 .433 11,0 .492 12,5
P .905 23,0 .905 23,0 1.574 40,0
Q 1.228 34,0 1.574 40,0 2.559 65,0
R 1.023 26,0 1.200 30,5 1.968 50,0
S .078 2,0 .056 1,5 .157 4,0
T .078 2,0 .118 3,0 .157 4,0
U .000 0,0 .019 0,5 .000 0,0
V .393 6,5 .393 7,0 .688 10,5
X .118 7,1 .216 10,0 .236 15,7
0,8
O X
N +0,30 ( +.0118" )
( )
0 0 M +0,20 +.0078"
0 0
HOLEMAKING
ROMICRON
HSK MODBORE
INDEXABLE DRILLING
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A59

To place an order, contact your Kennametal
representative or visit www.kennametal.com.

Milling Products
Milling Inserts
Face Mills
KSRM – Titanium Machining (RCGT....)
KSOM Mini – Universal Machining (OF.T06)
KSOM – Universal Machining (OF.T07...)
M780 – Steel and Cast Iron Machining (SNXF12...)
FIX-PERFECT – Aluminum Machining (BGHX15..., PCD-tipped)
KSCM – Aluminum Machining (adjustable)
End Mills
NGE-A – Universal Machining (ADKT1035...)
Mill1-14 – Universal Machining (ED.T14...)
Mill1-18 – Universal Machining (ED.T18...)
Mill1-MAX – Aluminum Machining (KE.T25...)
Solid Carbide End Mills
Tapered and Multi-Flute, Stainless Steel,
Titanium and High Temp Alloys Machining
Rougher, Aluminum Machining
Slotting / Helical
KSSM – Adjustable and Fixed Width Slotting Cutter
KSSM – Helical End Mill for Universal Machining
Die and Mold
RDHX/RDPX – SCREW-ON End Mill (RDHX…)
KSWM KenFEED – High-Feed Milling (WPM…)
KDMB/KDMT – Ball Nose Finisher
B2
B18
B18
B22
B28
B32
B36
B38
B44
B44
B50
B56
B64
B70
B70
B72
B75
B75
B90
B94
B94
B98
B104
B1

Milling Inserts
Grade Selection
First Choice
Alternate Choice
H
S
N
K
M
P
INSERTS
ISO catalog number
ANSI catalog number
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC530M
KC715M
KC725M
KC915M
KC935M
ADKT-LC See page B46 ADKT103504PDERLC ADKT16221PDERLC
ADKT103504PDFRLC ADKT16221PDFR5LC
ADKT103504PDSRLC ADKT16221PDSRLC
ADKT1035PDERLC ADKT1622PDER5LC
ADKT1035PDFRLC ADKT1622PDFR5LC
ADKT1035PDSRLC ADKT1622PDSR5LC
ADKT103516PDERLC ADKT16224PDERLC
ADKT103524PDERLC ADKT16226PDERLC
ADKT103532PDERLC ADKT16228PDERLC
KD1410
KD1415
FACE MILLING
BGHX See page B36 BGHX15L5PCERGGTM BGHX15L5PCERGGTM
BGHX15L5PCSRLET BGHX15L5PCSRLET
BGHX15L504ERGET BGHX15L504ERGET
END MILLING
MILLING
EDCT-GD See pages B52, B56 EDCT140404PDERGD EC1404EGD
EDCT140408PDERGD EC1408EGD
EDCT140412PDERGD EC1412EGD
EDCT140416PDERGD EC1416EGD
EDCT140431PDERGD EC1431EGD
EDCT180504PDERGD EC1804E
EDCT180508PDERGD EC1808E
EDCT180512PDERGD EC1812E
EDCT-LD See pages B52, B56 EDCT140404PDERLD EC1404ELD
EDCT140408PDERLD EC1408ELD
EDCT140412PDERLD EC1412ELD
EDCT140416PDERLD EC1416ELD
EDCT140431PDERLD EC1431ELD
EDCT140404PDFRLDJ EC1404FLDJ
EDCT140408PDFRLDJ EC1408FLDJ
EDCT140412PDFRLDJ EC1412FLDJ
EDCT140416PDFRLDJ EC1416FLDJ
EDCT140431PDFRLDJ EC1431FLDJ
EDCT180504PDFRLDJ EC1804FJ
EDCT180508PDERLD EC1808E2
EDCT180508PDFRLDJ EC1808FJ
EDCT180512PDFRLDJ EC1812FJ
EDCT180516PDERLD EC1816E
EDCT180516PDFRLDJ EC1816FJ
EDCT180520PDFRLDJ EC1820FJ
EDCT180524PDFRLDJ EC1824FJ
EDCT180532PDERLD EC1832E
EDCT180532PDFRLDJ EC1832FJ
EDCT180540PDERLD EC1840E
EDCT180540PDFRLDJ EC1840FJ
EDCT180548PDERLD EC1848E
EDCT180548PDFRLDJ EC1848FJ
EDCT180564PDERLD EC1864E
EDCT180564PDFRLDJ EC1864FJ
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC530M
KC715M
KC725M
KC915M
KC935M
KD1410
KD1415
SLOTTING / HELICAL
DIE & MOLD
B2
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Milling Inserts
Dimensions
Dimensions
LI W S BS Rε L10 BCH
ISO catalog number
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
ADKT103504PDERLC 10,00 .394 6,70 .264 3,50 .138 1,59 .063 0,40 .015 - - - - ADKT-LC
ADKT103504PDFRLC 10,00 .394 6,70 .264 3,50 .138 1,59 .063 0,40 .015 - - - -
ADKT103504PDSRLC 10,00 .394 6,70 .264 3,50 .138 1,59 .063 0,40 .015 - - - -
ADKT1035PDERLC 10,00 .394 6,70 .264 3,50 .138 1,22 .048 0,80 .031 - - - -
ADKT1035PDFRLC 10,00 .394 6,70 .264 3,50 .138 1,22 .048 0,80 .031 - - - -
ADKT1035PDSRLC 10,00 .394 6,70 .264 3,50 .138 1,22 .048 0,80 .031 - - - -
ADKT103516PDERLC 10,00 .394 6,70 .264 3,50 .138 1,22 .048 1,60 .062 - - - -
BS
ADKT103524PDERLC 10,00 .394 6,70 .264 3,50 .138 1,22 .048 2,40 .093 - - - -
ADKT103532PDERLC 10,00 .394 6,70 .264 3,50 .138 1,22 .048 3,20 .125 - - - -
LI
Rε
W
5°
S
INSERTS
BGHX15L5PCERGGTM 3,00 - - - 5,00 .197 1,20 .035 - - 10,50 .157 0,60 .024 BGHX
BGHX15L5PCSRLET 5,00 - - - 5,00 .197 0,90 .035 - - 10,50 .157 0,60 .024
BGHX15L504ERGET 5,00 - - - 5,00 .197 - - - - 10,50 .157 - -
24°
FACE MILLING
90°
L10
LI
BS
EDCT140404PDERGD 17,48 .688 8,46 .333 4,50 .177 2,95 .116 0,40 .015 - - - - EDCT-GD
EDCT140408PDERGD 17,48 .688 8,46 .333 4,50 .177 2,56 .101 0,80 .032 - - - -
EDCT140412PDERGD 17,48 .688 8,46 .333 4,50 .177 2,17 .085 1,20 .047 - - - -
EDCT140416PDERGD 17,48 .688 8,46 .333 4,50 .177 1,77 .070 1,60 .063 - - - -
EDCT140431PDERGD 17,48 .688 8,46 .333 4,50 .177 0,26 .010 3,10 .122 - - - -
W
EDCT180504PDERGD 21,76 .857 10,97 .432 5,50 .220 2,35 .090 0,40 .015 - - - -
EDCT180508PDERGD 21,76 .857 10,97 .432 5,50 .220 1,90 .075 0,80 .032 - - - -
EDCT180512PDERGD 21,76 .857 10,97 .432 5,50 .220 1,45 .060 1,20 .047 - - - - Rε
LI
S BCH
BS
15°
S
MILLING
END MILLING
EDCT140404PDERLD 17,48 .688 8,46 .333 4,50 .177 2,95 .116 0,40 .015 - - - - EDCT-LD
EDCT140408PDERLD 17,48 .688 8,46 .333 4,50 .177 2,56 .101 0,80 .032 - - - -
EDCT140412PDERLD 17,48 .688 8,46 .333 4,50 .177 2,17 .085 1,20 .047 - - - -
EDCT140416PDERLD 17,48 .688 8,46 .333 4,50 .177 1,77 .070 1,60 .063 - - - -
EDCT140431PDERLD 17,48 .688 8,46 .333 4,50 .177 0,26 .010 3,10 .122 - - - - W
EDCT140404PDFRLDJ 17,48 .688 8,46 .333 4,50 .177 2,95 .116 0,40 .015 - - - -
EDCT140408PDFRLDJ 17,48 .688 8,46 .333 4,50 .177 2,56 .101 0,80 .032 - - - -
EDCT140412PDFRLDJ 17,48 .688 8,46 .333 4,50 .177 2,17 .085 1,20 .047 - - - -
Rε
EDCT140416PDFRLDJ 17,48 .688 8,46 .333 4,50 .177 1,77 .070 1,60 .063 - - - -
EDCT140431PDFRLDJ 17,48 .688 8,46 .333 4,50 .177 0,26 .010 3,20 .122 - - - -
EDCT180504PDFRLDJ 21,76 .857 10,97 .432 5,50 .220 3,07 .121 0,40 .015 - - - -
EDCT180508PDERLD 21,76 .857 10,97 .432 5,50 .220 2,69 .106 0,80 .032 - - - -
EDCT180508PDFLLDJ 21,76 .857 10,97 .432 5,50 .220 2,69 .106 0,80 .032 - - - -
EDCT180512PDFRLDJ 21,76 .857 10,97 .432 5,50 .220 2,29 .090 1,20 .047 - - - -
EDCT180516PDERLD 21,76 .857 10,97 .432 5,50 .220 1,90 .075 1,60 .062 - - - -
EDCT180516PDFRLDJ 21,76 .857 10,97 .432 5,50 .220 1,90 .075 1,60 .062 - - - -
EDCT180520PDFRLDJ 21,76 .857 10,97 .432 5,50 .220 1,44 .059 2,00 .078 - - - -
EDCT180524PDFRLDJ 21,76 .857 10,97 .432 5,50 .220 1,11 .044 2,40 .093 - - - -
EDCT180532PDERLD 21,76 .857 10,97 .432 5,50 .220 0,32 .013 3,20 .125 - - - -
EDCT180532PDFRLDJ 21,76 .857 10,97 .432 5,50 .220 0,32 .013 3,20 .125 - - - -
EDCT180540PDERLD 21,76 .857 10,97 .432 5,50 .220 - - 4,00 .156 - - - -
EDCT180540PDFRLDJ 21,76 .857 10,97 .432 5,50 .220 - - 4,00 .156 - - - -
EDCT180548PDERLD 21,76 .857 10,97 .432 5,50 .220 - - 4,80 .187 - - - -
EDCT180548PDFRLDJ 21,76 .857 10,97 .432 5,50 .220 - - 4,80 .187 - - - -
EDCT180564PDERLD 21,76 .857 10,97 .432 5,50 .220 - - 6,40 .250 - - - -
EDCT180564PDFRLDJ 21,76 .857 10,97 .432 5,50 .220 - - 6,40 .250 - - - -
Ll
15°
BS
S
SLOTTING / HELICAL
DIE & MOLD
Order example:
ISO catalog number: ADKT103504PDERLC
ANSI catalog number: ADKT16221PDERLC
Insert grade: KC520M
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B3

Milling Inserts
Grade Selection
First Choice
Alternate Choice
H
S
N
K
M
P
INSERTS
ISO catalog number
ANSI catalog number
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC530M
KC715M
KC725M
KC915M
KC935M
EDPT-GD See pages B52, B56 EDPT140408PDSRGD EP1408SGD
EDPT140412PDSRGD EP1412SGD
EDPT140416PDSRGD EP1416SGD
EDPT180508PDERGD EP1808E
EDPT180508PDSRGD EP1808S
EDPT180512PDERGD EP1812E
EDPT180512PDSRGD EP1812S
EDPT180516PDERGD EP1816E
EDPT180516PDSRGD EP1816S
EDPT180524PDERGD EP1824E
EDPT180532PDERGD EP1832E
EDPT180532PDSRGD EP1832S
EDPT180548PDERGD EP1848E
EDPT180564PDERGD EP1864E
KD1410
KD1415
KEGT-LDJ See page B64 KEGT25L508PEERLDJ KG2508ELDJ
KEGT25L512PEERLDJ KG2512ELDJ
KEGT25L516PEERLDJ KG2516ELDJ
KEGT25L520PEERLDJ KG2520ELDJ
KEGT25L524PEERLDJ KG2524ELDJ
KEGT25L531PEERLDJ KG2531ELDJ
KEGT25L540PEERLDJ KG2540ELDJ
KEGT25L547PEERLDJ KG2547ELDJ
KEGT25L550PEERLDJ KG2550ELDJ
KEGT25L560PEERLDJ KG2560ELDJ
KEGT25L564PEERLDJ KG2564ELDJ
KEEW-LNJ See page B64 KEEW25L508PEFRLNJ KE2508FLNJ
KEEW25L516PEFRLNJ KE2516FLNJ
KEEW25L531PEFRLNJ KE2531FLNJ
KEEW25L547PEFRLNJ KE2547FLNJ
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC530M
KC715M
KC725M
KC915M
KC935M
KD1410
KD1415
DIE & MOLD
SLOTTING / HELICAL
FACE MILLING
END MILLING
MILLING
B4
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Milling Inserts
Dimensions
Dimensions
LI W S BS Rε L10 e
ISO catalog number
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
EDPT140408PDSRGD 17,48 .688 8,46 .333 4,5 .177 2,56 .101 0,8 .032 - - - - EDPT-GD
EDPT140412PDSRGD 17,48 .688 8,46 .333 4,5 .177 2,17 .085 1,2 .047 - - - -
EDPT140416PDSRGD 17,48 .688 8,46 .333 4,5 .177 1,77 .070 1,6 .063 - - - -
EDPT180508PDERGD 21,76 .875 10,97 .432 5,50 .220 2,69 .106 0,80 .032 - - - -
EDPT180508PDSRGD 21,76 .875 10,97 .432 5,50 .220 2,69 .106 0,80 .032 - - - - W
EDPT180512PDERGD 21,76 .875 10,97 .432 5,50 .220 2,29 .090 1,20 .047 - - - -
EDPT180512PDSRGD 21,76 .875 10,97 .432 5,50 .220 2,29 .090 1,20 .047 - - - -
EDPT180516PDERGD 21,76 .875 10,97 .432 5,50 .220 1,90 .075 1,60 .063 - - - - Rε
EDPT180516PDSRGD 21,76 .875 10,97 .432 5,50 .220 1,90 .075 1,60 .063 - - - -
EDPT180524PDERGD 21,76 .875 10,97 .432 5,50 .220 1,11 .044 2,40 .093 - - - -
EDPT180532PDERGD 21,76 .875 10,97 .432 5,50 .220 0,32 .013 3,20 .125 - - - -
EDPT180532PDSRGD 21,76 .875 10,97 .432 5,50 .220 0,32 .013 3,20 .125 - - - -
EDPT180548PDERGD 21,76 .875 10,97 .432 5,50 .220 - - 4,80 .187 - - - -
EDPT180564PDERGD 21,76 .875 10,97 .432 5,50 .220 - - 6,40 .250 - - - -
LI
BS
15°
S
FACE MILLING
INSERTS
KEGT25L508PEERLDJ 31,47 1.239 14,60 .575 5,21 .205 5,34 .210 0,80 .031 - - - - KEGT-LDJ
KEGT25L512PEERLDJ 31,47 1.239 14,60 .575 5,21 .205 4,94 .195 1,20 .047 - - - -
KEGT25L516PEERLDJ 31,47 1.239 14,60 .575 5,21 .205 4,55 .179 1,60 .062 - - - -
KEGT25L520PEERLDJ 31,47 1.239 14,60 .575 5,21 .205 4,15 .164 2,00 .079 - - - -
KEGT25L524PEERLDJ 31,47 1.239 14,60 .575 5,21 .205 3,78 .149 2,40 .094 - - - - W
KEGT25L531PEERLDJ 31,47 1.239 14,60 .575 5,21 .205 3,06 .120 3,10 .122 - - - -
KEGT25L540PEERLDJ 31,47 1.239 14,60 .575 5,21 .205 2,16 .085 4,00 .157 - - - -
KEGT25L547PEERLDJ 31,47 1.239 14,60 .575 5,21 .205 1,40 .055 4,70 .187 - - - -
Rε
KEGT25L550PEERLDJ 31,47 1.239 14,60 .575 5,21 .205 1,14 .045 5,00 .196 - - - -
KEGT25L560PEERLDJ 31,47 1.239 14,60 .575 5,21 .205 0,13 .005 6,00 .236 - - - -
KEGT25L564PEERLDJ 29,99 1.181 14,60 .575 5,21 .205 - - 6,40 .250 - - - -
LI
BS
20°
S
MILLING
END MILLING
KEEW25L508PEFRLNJ 31,47 1.239 14,60 .575 5,21 .205 5,34 .210 0,80 .031 - - - - KEEW-LNJ
KEEW25L516PEFRLNJ 31,47 1.239 14,60 .575 5,21 .205 4,55 .179 1,60 .062 - - - -
KEEW25L531PEFRLNJ 31,47 1.239 14,60 .575 5,21 .205 3,06 .200 3,10 .122 - - - -
KEEW25L547PEFRLNJ 31,47 1.239 14,60 .575 5,21 .205 1,40 .055 4,70 .187 - - - -
W
BS
R
ε
LI
20°
S
DIE & MOLD
SLOTTING / HELICAL
Order example:
ISO catalog number: EDPT140408PDSRGD
ANSI catalog number: EP1408S
Insert grade: KC520M
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B5

Milling Inserts
Grade Selection
First Choice
Alternate Choice
H
S
N
K
M
P
INSERTS
Old
Catalog number
New
Catalog number
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC525M
KC530M
KC715M
KC725M
KC915M
KDMB-GN See page B104 KBN08GN KDMB08M0ERGN
KBN10GN KDMB10M0ERGN
KBN12GN KDMB12M0ERGN
KBN16GN KDMB16M0ERGN
KBN20GN KDMB20M0ERGN
KBN25GN KDMB25M0ERGN
KDMB0500M0ERGN
KDMB0750M0ERGN
KDMB1000M0ERGN
KC935M
KD1410
KDMB-GC See page B104 KBN08GC KDMB08M0ERGC
KBN10GC KDMB10M0ERGC
KBN12GC KDMB12M0ERGC
KBN16GC KDMB16M0ERGC
KBN20GC KDMB20M0ERGC
KBN25GC KDMB25M0ERGC
KDMB-LD See page B104 KBN08LD KDMB08M0FRLD
KBN10LD KDMB10M0FRLD
KBN12LD KDMB12M0FRLD
KBN16LD KDMB16M0FRLD
KBN20LD KDMB20M0FRLD
KBN25LD KDMB25M0FRLD
KDMS-GN See page B108 KTC08GN KDMS0806ERGN
KTC10GN KDMS1008ERGN
KTC12GN KDMS1210ERGN
KTC16GN KDMS1613ERGN
KTC20GN KDMS2016ERGN
KTC25GN KDMS2520ERGN
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC525M
KC530M
KC715M
KC725M
KC915M
KC935M
KD1410
DIE & MOLD
SLOTTING / HELICAL
FACE MILLING
END MILLING
MILLING
B6
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Milling Inserts
Dimensions
Dimensions
New
Catalog number
LI W S BS Rε L10 BCH
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
KDMB08M0ERGN - - 8,00 .315 2,00 .079 - - 4,00 .160 - - - - KDMB-GN
KDMB10M0ERGN - - 10,00 .394 2,50 .098 - - 5,00 .200 - - - -
KDMB12M0ERGN - - 12,00 .472 2,50 .098 - - 6,00 .240 - - - -
KDMB16M0ERGN - - 16,00 .630 3,00 .118 - - 8,00 .310 - - - -
Rε
KDMB20M0ERGN - - 20,00 .787 3,00 .118 - - 10,00 .390 - - - -
KDMB25M0ERGN - - 25,00 .984 4,00 .157 - - 12,50 .490 - - - -
KDMB0500M0ERGN - - 12,70 .500 2,50 .098 - - 6,35 .250 - - - -
KDMB0750M0ERGN - - 19,05 .750 3,00 .118 - - 9,53 .375 - - - -
KDMB1000M0ERGN - - 25,40 1.000 4,00 .157 - - 12,70 .500 - - - -
S
W
FACE MILLING
INSERTS
KDMB08M0ERGC - - 8,00 .315 2,00 .079 - - 4,00 .160 - - - - KDMB-GC
KDMB10M0ERGC - - 10,00 .394 2,50 .098 - - 5,00 .200 - - - -
KDMB12M0ERGC - - 12,00 .472 2,50 .098 - - 6,00 .240 - - - -
KDMB16M0ERGC - - 16,00 .630 3,00 .118 - - 8,00 .310 - - - -
R ε
KDMB20M0ERGC - - 20,00 .787 3,00 .118 - - 10,00 .390 - - - -
KDMB25M0ERGC - - 25,00 .984 4,00 .157 - - 12,50 .490 - - - -
W
KDMB08M0FRLD - - 8,00 .315 2,00 .079 - - 4,00 .160 - - - - KDMB-LD
KDMB10M0FRLD - - 10,00 .394 2,50 .098 - - 5,00 .200 - - - -
KDMB12M0FRLD - - 12,00 .472 2,50 .098 - - 6,00 .240 - - - -
KDMB16M0FRLD - - 16,00 .630 3,00 .118 - - 8,00 .310 - - - -
Rε
KDMB20M0FRLD - - 20,00 .787 3,00 .118 - - 10,00 .390 - - - -
KDMB25M0FRLD - - 25,00 .984 4,00 .157 - - 12,50 .490 - - - -
S
W
MILLING
END MILLING
S
SLOTTING / HELICAL
KDMS0806ERGN 9,50 .374 8,00 .315 2,00 .079 - - 0,60 .024 - - - - KDMS-GN
KDMS1008ERGN 11,50 .453 10,00 .394 2,50 .098 - - 0,80 .031 - - - -
KDMS1210ERGN 14,00 .551 12,00 .472 2,50 .098 - - 1,00 .039 - - - -
KDMS1613ERGN 16,00 .630 16,00 .630 3,00 .118 - - 2,00 .079 - - - -
KDMS2016ERGN 18,00 .709 20,00 .787 3,00 .118 - - 1,60 .063 - - - -
KDMS2520ERGN 23,50 .925 25,00 .984 4,00 .157 - - 2,00 .079 - - - -
W
Rε
LI
S
DIE & MOLD
Order example:
Old catalog number:
New catalog number:
Insert grade:
KBN08GN
KDMB08M0ERGN
KC515M
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B7

Milling Inserts
Grade Selection
First Choice
Alternate Choice
H
S
N
K
M
P
INSERTS
Old
Catalog number
New
Catalog number
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC525M
KC530M
KC715M
KC725M
KC915M
KC935M
KD1410
KDMS-GC See page B108 KTC08GN KDMS0806ERGC
KTC10GN KDMS1008ERGC
KTC12GCR10 KDMS1210ERGC
KTC16GCR13 KDMS1613ERGC
KTC20GCR16 KDMS2016ERGC
KTC25GCR20 KDMS2520ERGC
END MILLING
MILLING
KDMT-GN See page B108 KTC12BD KDMT1210ERGN
KDMT1220ERGN
KDMT1610ERGN
KTC16BD KDMT1630ERGN
KDMT2010ERGN
KTC20BD KDMT2040ERGN
KDMT2510ERGN
KTC25BD KDMT2550ERGN
KDMT05002ERGN
KDMT05004ERGN
KDMT06252ERGN
KDMT06254ERGN
KDMT07502ERGN
KDMT07504ERGN
KDMT10002ERGN
KDMT10004ERGN
KDMT10002ERGN
SLOTTING / HELICAL
KDMT-GC See page B108 KDMT1210ERGC
KTC12BCDF KDMT1220ERGC
KDMT1610ERGC
KTC16BCDF KDMT1630ERGC
KDMT2010ERGC
KTC20BCDF KDMT2040ERGC
KDMT2510ERGC
KTC25BCDF KDMT2550ERGC
KDMT05004ERGC
KDMT05002ERGC
KDMT06254ERGC
KDMT06252ERGC
KDMT07504ERGC
KDMT07502ERGC
KDMT10004ERGC
KDMT10002ERGC
KDMT10004ERGC
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC525M
KC530M
KC715M
KC725M
KC915M
KC935M
KD1410
FACE MILLING
DIE & MOLD
B8
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Milling Inserts
Dimensions
Dimensions
New
Catalog number
LI W S BS Rε L10 BCH
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
KDMS0806ERGC 9,50 .374 8,00 .315 2,00 .079 - - 0,60 .024 - - - - KDMS-GC
KDMS1008ERGC 11,50 .453 10,00 .394 2,50 .098 - - 0,80 .031 - - - -
KDMS1210ERGC 14,00 .551 12,00 .472 2,50 .098 - - 1,00 .039 - - - -
KDMS1613ERGC 16,00 .630 16,00 .630 3,00 .118 - - 1,30 .051 - - - -
KDMS2016ERGC 18,00 .709 20,00 .787 3,00 .118 - - 1,60 .063 - - - -
KDMS2520ERGC 23,50 .925 25,00 .984 4,00 .157 - - 2,00 .079 - - - -
W
INSERTS
Rε
LI
S
KDMT1210ERGN 14,00 .551 12,00 .472 2,50 .098 - - 1,00 .039 - - - - KDMT-GN
KDMT1220ERGN 14,00 .551 12,00 .472 2,50 .098 - - 2,00 .039 - - - -
KDMT1610ERGN 16,00 .630 16,00 .630 3,00 .118 - - 1,00 .039 - - - -
KDMT1630ERGN 16,00 .630 16,00 .630 3,00 .118 - - 3,00 .051 - - - -
KDMT2010ERGN 18,00 .709 20,00 .787 3,00 .118 - - 1,00 .039 - - - -
KDMT2040ERGN 18,00 .709 20,00 .787 3,00 .118 - - 4,00 .051 - - - -
KDMT2510ERGN 23,50 .925 25,00 .984 4,00 .157 - - 1,00 .039 - - - -
KDMT2550ERGN 23,50 .925 25,00 .984 4,00 .157 - - 5,00 .079 - - - -
KDMT05002ERGN - - 12,70 .500 2,50 .098 - - 2,00 .079 - - - - Rε
KDMT05004ERGN - - 12,70 .500 2,50 .098 - - 4,00 .157 - - - -
KDMT06252ERGN - - 15,88 .625 3,00 .118 - - 2,00 .079 - - - -
KDMT06254ERGN - - 15,88 .625 3,00 .118 - - 4,00 .157 - - - -
KDMT07502ERGN - - 19,05 .750 3,00 .118 - - 2,00 .079 - - - -
KDMT07504ERGN - - 19,05 .750 3,00 .118 - - 4,00 .157 - - - -
KDMT10002ERGN 11,50 .453 25,40 1.000 4,00 .157 - - 2,00 .079 - - - -
KDMT10004ERGN 11,50 .453 25,40 1.000 4,00 .157 - - 4,00 .157 - - - -
KDMT10002ERGN 11,50 .453 25,40 1.000 4,00 .157 - - 8,00 .315 - - - -
LI
S
W
MILLING
END MILLING
KDMT1210ERGC 14,00 .551 12,00 .472 2,50 .098 - - 1,00 .039 - - - - KDMT-GC
KDMT1220ERGC 14,00 .551 12,00 .472 2,50 .098 - - 2,00 .039 - - - -
KDMT1610ERGC 16,00 .630 16,00 .630 3,00 .118 - - 1,00 .039 - - - -
KDMT1630ERGC 16,00 .630 16,00 .630 3,00 .118 - - 3,00 .051 - - - -
KDMT2010ERGC 18,00 .709 20,00 .787 3,00 .118 - - 1,00 .039 - - - -
KDMT2040ERGC 18,00 .709 20,00 .787 3,00 .118 - - 4,00 .051 - - - -
KDMT2510ERGC 23,50 .925 25,00 .984 4,00 .157 - - 1,00 .039 - - - -
KDMT2550ERGC 23,50 .925 25,00 .984 4,00 .157 - - 5,00 .079 - - - -
KDMT05004ERGC - - 12,70 .500 2,50 .098 - - 2,00 .079 - - - - R ε
KDMT05002ERGC - - 12,70 .500 2,50 .098 - - 4,00 .157 - - - -
KDMT06254ERGC - - 15,88 .625 3,00 .118 - - 2,00 .079 - - - -
KDMT06252ERGC - - 15,88 .625 3,00 .118 - - 4,00 .157 - - - -
KDMT07504ERGC - - 19,05 .750 3,00 .118 - - 2,00 .079 - - - -
KDMT07502ERGC - - 19,05 .750 3,00 .118 - - 4,00 .157 - - - -
KDMT10004ERGC 11,50 .453 25,40 1.000 4,00 .157 - - 2,00 .079 - - - -
KDMT10002ERGC 11,50 .453 25,40 1.000 4,00 .157 - - 4,00 .157 - - - -
KDMT10004ERGC 11,50 .453 25,40 1.000 4,00 .157 - - 8,00 .315 - - - -
LI
S
W
DIE & MOLD
FACE MILLING
SLOTTING / HELICAL
Order example:
Old catalog number: KTC08GN
New catalog number: KDMS0806ERGC
Insert grade: KC515M
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B9

Milling Inserts
Grade Selection
First Choice
Alternate Choice
H
S
N
K
M
P
INSERTS
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC530M
KC715M
KC725M
KC915M
KC935M
OFKT See page B28 OFKT06L5AFENGB OFKT53AFEN4GB
OFKT06L5AFSNHB OFKT53AFSN4GB
OFKT06L5AFFNLNJ OFKT53AFFN4LNJ
OFKT07L6AFENGB OFKT64AFEN6GB
OFKT07L6AFSNHB OFKT64AFSN6HB
OFKT07L6AFFNLNJ OFKT64AFFN6LNJ
6
7
5
8
4
1
3
2
ISO catalog number
ANSI catalog number
KD1410
KD1415
TN2510
TN5515
TN7525
TN450
TN6510
TN6520
TN6525
TN6540
FACE MILLING
OFPT See page B28 OFPT06L5AFENGB OFPT53AFEN4HB
OFPT06L5AFSNHB OFPT53AFSN6HB
OFPT07L6AFENGB OFPT64AFEN6GB
OFPT07L6AFSNHB OFPT64AFSN6HB
6
7
5
8
4
1
3
2
END MILLING
MILLING
RCGT-LF See page B18 RCGT190600ELF RCGT64ELF
RCGT250900ELF RCGT86ELF
RCGT-HF See page B18 RCGT190600SHF RCGT64SHF
RCGT250900SHF RCGT86SHF
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC530M
KC715M
KC725M
KC915M
KC935M
RDHX-SLN See page B94 RDHX07T1M0SLN RDHX07T1M0SLN
RDHX0702M0SLN RDHX0702M0SLN
KD1410
KD1415
TN2510
TN5515
TN7525
TN450
TN6510
TN6520
TN6525
TN6540
SLOTTING / HELICAL
DIE & MOLD
B10
To place an order, contact your Kennametal representative or visit www.kennametal.com.

7
2
Milling Inserts
Dimensions
Dimensions
D W S BS Rε L10 BCH
ISO catalog number
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
OFKT06L5AFENGB - - 14,70 .578 5,00 .197 - - 0,80 .030 6,00 .236 - - OFKT
OFKT06L5AFSNHB - - 14,70 .578 5,00 .197 - - 0,80 .030 6,00 .236 0,20 .008
OFKT06L5AFFNLNJ - - 14,70 .578 5,00 .197 - - 0,80 .030 6,00 .236 - -
OFKT06L5AFNLB - - 14,70 .578 5,00 .197 1,2 .047 0,80 .030 6,00 .236 - -
OFKT07L6AFENGB - - 18,70 .735 6,00 .236 - - 1,20 .047 7,50 .295 - -
OFKT07L6AFSNHB - - 18,70 .735 6,00 .236 - - 1,20 .047 7,50 .295 - -
OFKT07L6AFFNLNJ - - 18,70 .735 6,00 .236 - - 1,20 .047 7,50 .295 - -
OFKT07L6AFENLB - - 18,70 .735 6,00 .236 2,1 .083 - - - - - -
Rε
6
7
5
8
4
1
3
2
BS
25°
S
BCH
INSERTS
L10
W
OFPT06L5AFENGB - - 14,70 .578 5,00 .197 - - 0,80 .030 6,00 .236 - - OFPT
OFPT06L5AFSNHB - - 14,70 .578 5,00 .197 - - 0,80 .030 6,00 .236 0,20 .008
OFPT07L6AFENGB - - 18,70 .735 6,00 .236 - - 11,90 .470 7,50 .295 - -
OFPT07L6AFSNHB - - 18,70 .735 6,00 .236 - - 11,90 .470 7,50 .295 - -
6
5
4
3
FACE MILLING
Rε
8
1
L10
W
25°
S
BCH
RCGT190600ELF 19,05 .750 - - 6,35 .250 - - - - - - - - RCGT-LF
RCGT250900ELF 25,40 1.000 - - 9,53 .375 - - - - - - - -
MILLING
END MILLING
D
7°
S
RCGT190600SHF 19,05 .750 - - 6,35 .250 - - - - - - - - RCGT-HF
RCGT250900SHF 25,40 1.000 - - 9,53 .375 - - - - - - - -
SLOTTING / HELICAL
D
7°
S
RDHX07T1M0SLN 7,00 .276 - - 1,98 5/64 - - - - - - - - RDHX-SLN
RDHX0702M0SLN 7,00 .276 - - 2,38 3/32 - - - - - - - -
DIE & MOLD
D
15°
S
Order example:
ISO catalog number: OFKT06L5AFENGB
ANSI catalog number: OFKT53AFEN4GB
Insert grade: KC520M
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B11

Milling Inserts
Grade Selection
First Choice
Alternate Choice
H
S
N
K
M
P
INSERTS
ISO catalog number
ANSI catalog number
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC530M
KC715M
KC725M
KC915M
KC935M
RDHX-SGN See page B94 RDHX1003M0SGN RDHX1003M0SGN
RDHX12T3M0SGN RDHX12T3M0SGN
RDHX1604M0SGN RDHX1604M0SGN
KD1410
KD1415
TN2510
TN5515
TN7525
TN450
TN6510
TN6520
TN6525
TN6540
FACE MILLING
RDPX-SHN See page B94 RDPX1003M0SHN RDPX1003M0SHN
RDPX12T3M0SHN RDPX12T3M0SHN
RDPX1604M0SHN RDPX1604M0SHN
END MILLING
MILLING
RDPX-SHP See page B94 RDPX1003M0SHP RDPX1003M0SHP
RDPX12T3M0SHP RDPX12T3M0SHP
RDPX1604M0SHP RDPX1604M0SHP
SDCT-LD2 See page B82 SDCT120404PDELLD2 SDCT431PDEL8LD2
SDCT120404PDERLD2 SDCT431PDER8LD2
SDCT120408PDELLD2 SDCT43PDEL8LD2
SDCT120408PDERLD2 SDCT43PDER8LD2
SDCT120412PDELLD2 SDCT433PDEL8LD2
SDCT120412PDERLD2 SDCT433PDER8LD2
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC530M
KC715M
KC725M
KC915M
KC935M
SDCT-LD2 See page B82 SDCT120416ENLD2 SDCT434ENLD2
SDCT120420ENLD2 SDCT435ENLD2
SDCT120424ENLD2 SDCT436ENLD2
SDCT120432ENLD2 SDCT438ENLD2
KD1410
KD1415
TN2510
TN5515
TN7525
TN450
TN6510
TN6520
TN6525
TN6540
SLOTTING / HELICAL
DIE & MOLD
B12
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Milling Inserts
Dimensions
Dimensions
D/LI W S BS Rε L10 BCH
ISO catalog number
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
RDHX1003M0SGN 10,00 .394 - - 3,18 1/8 - - - - - - - - RDHX-SGN
RDHX12T3M0SGN 12,00 .472 - - 3,97 5/32 - - - - - - - -
RDHX1604M0SGN 16,00 .630 - - 4,76 3/16 - - - - - - - -
INSERTS
D
15°
S
RDPX1003M0SHN 10,00 .394 - - 3,18 1/8 - - - - - - - - RDPX-SHN
RDPX12T3M0SHN 12,00 .472 - - 3,97 5/32 - - - - - - - -
RDPX1604M0SHN 16,00 .630 - - 4,76 3/16 - - - - - - - -
FACE MILLING
D
15°
S
RDPX1003M0SHP 10,00 .394 - - 3,18 1/8 - - - - - - - - RDPX-SHP
RDPX12T3M0SHP 12,00 .472 - - 3,97 5/32 - - - - - - - -
RDPX1604M0SHP 16,00 .630 - - 4,76 3/16 - - - - - - - -
MILLING
END MILLING
D
15°
S
SDCT120404PDELLD2 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 0,40 1/64 - - - - SDCT-LD2
SDCT120404PDERLD2 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 0,40 1/64 - - - -
SDCT120408PDELLD2 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 0,80 1/32 - - - -
SDCT120408PDERLD2 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 0,80 1/32 - - - -
SDCT120412PDELLD2 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 1,20 3/64 - - - -
SDCT120412PDERLD2 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 1,20 3/64 - - - -
W
BS
SLOTTING / HELICAL
R
ε
LI
11°
S
SDCT120416ENLD2 12,70 1/2 12,70 1/2 4,76 3/16 - - 1,60 1/16 - - - - SDCT-LD2
SDCT120420ENLD2 12,70 1/2 12,70 1/2 4,76 3/16 - - 2,00 5/64 - - - -
SDCT120424ENLD2 12,70 1/2 12,70 1/2 4,76 3/16 - - 2,40 3/32 - - - -
SDCT120432ENLD2 12,70 1/2 12,70 1/2 4,76 3/16 - - 3,20 1/8 - - - -
DIE & MOLD
W
R
ε
LI
15°
S
Order example:
ISO catalog number: RDHX1003M0SGN
ANSI catalog number: RDHX1003M0SGN
Insert grade: KC510M
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B13

Milling Inserts
Grade Selection
First Choice
Alternate Choice
H
S
N
K
M
P
INSERTS
ISO catalog number
ANSI catalog number
SDCT-LE See page B82 SDCT120404PDFLLE SDCT431PDFL8LE
SDCT120404PDFRLE SDCT431PDFR8LE
SDCT120408PDFLLE SDCT43PDFL8LE
SDCT120408PDFRLE SDCT43PDFR8LE
SDCT120412PDFLLE SDCT433PDFL8LE
SDCT120412PDFRLE SDCT433PDFR8LE
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC530M
KC715M
KC725M
KC915M
KC935M
KD1410
KD1415
TN2510
TN5515
TN7525
TN450
TN6510
TN6520
TN6525
TN6540
FACE MILLING
SDCT-LE See page B82 SDCT120416FNLE SDCT434FNLE
SDCT120420FNLE SDCT435FNLE
SDCT120424FNLE SDCT436FNLE
SDCT120432FNLE SDCT438FNLE
END MILLING
MILLING
SDET-GB2 See page B82 SDET120408PDELGB2 SDET43PDEL8GB2
SDET120408PDERGB2 SDET43PDER8GB2
SDET120408PDSLGB2 SDET43PDSL8GB2
SDET120408PDSRGB2 SDET43PDSR8GB2
SDET120412PDELGB2 SDET433PDEL8GB2
SDET120412PDERGB2 SDET433PDER8GB2
SDET-GB2 See page B82 SDET120416SNGB2 SDET434SNGB2
SDET120420SNGB2 SDET435SNGB2
SDET120424SNGB2 SDET436SNGB2
SDET120432SNGB2 SDET438SNGB2
SDPT-GB2 See page B90 SDPT1204PDERGB2 SDPT43PDER8GB2
SDPT1204PDSRGB2 SDPT43PDSR8GB2
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC530M
KC715M
KC725M
KC915M
KC935M
SNXF See page B32 SNXF120412ENLD SNXF433ENLD
SNXF120412SNGP SNXF433SNGP
SNXF120412SNHE SNXF433SNHE
KD1410
KD1415
TN2510
TN5515
TN7525
TN450
TN6510
TN6520
TN6525
TN6540
SLOTTING / HELICAL
DIE & MOLD
B14
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Milling Inserts
Dimensions
Dimensions
LI W S BS Rε L10 BCH
ISO catalog number
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
SDCT120404PDFLLE 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 0,40 1/64 - - - - SDCT-LE
SDCT120404PDFRLE 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 0,40 1/64 - - - -
SDCT120408PDFLLE 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 0,80 1/32 - - - -
SDCT120408PDFRLE 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 0,80 1/32 - - - -
SDCT120412PDFLLE 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 1,20 3/64 - - - -
SDCT120412PDFRLE 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 1,20 3/64 - - - -
W
BS
INSERTS
R
ε
LI
15°
S
SDCT120416FNLE 12,70 1/2 12,70 1/2 4,76 3/16 - - 1,60 1/16 - - - - SDCT-LE
SDCT120420FNLE 12,70 1/2 12,70 1/2 4,76 3/16 - - 2,00 5/64 - - - -
SDCT120424FNLE 12,70 1/2 12,70 1/2 4,76 3/16 - - 2,40 3/32 - - - -
SDCT120432FNLE 12,70 1/2 12,70 1/2 4,76 3/16 - - 3,20 1/8 - - - -
W
FACE MILLING
R
ε
LI
15°
S
SDET120408PDELGB2 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 0,80 1/32 - - - - SDET-GB2
SDET120408PDERGB2 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 0,80 1/32 - - - -
SDET120408PDSLGB2 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 0,80 1/32 - - - -
SDET120408PDSRGB2 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 0,80 1/32 - - - -
SDET120412PDELGB2 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 1,20 3/64 - - - -
SDET120412PDERGB2 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 1,20 3/64 - - - -
W
R
ε
LI
15°
BS
S
MILLING
END MILLING
SDET120416SNGB2 12,70 1/2 12,70 1/2 4,76 3/16 - - 1,60 1/16 - - - - SDET-GB2
SDET120420SNGB2 12,70 1/2 12,70 1/2 4,76 3/16 - - 2,00 5/64 - - - -
SDET120424SNGB2 12,70 1/2 12,70 1/2 4,76 3/16 - - 2,40 3/32 - - - -
SDET120432SNGB2 12,70 1/2 12,70 1/2 4,76 3/16 - - 3,20 1/8 - - - -
W
SDPT1204PDERGB2 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 0,80 1/32 - - - - SDPT-GB2
SDPT1204PDSRGB2 12,70 1/2 12,70 1/2 4,76 3/16 2,70 .106 0,80 1/32 - - - -
R
ε
LI
15°
BS
S
SLOTTING / HELICAL
W
Rε
LI
15°
S
SNXF120412ENLD 12,70 .500 12,70 .500 4,76 .187 - - 1,2 .05 - - - - SNXF
SNXF120412SNGP 12,70 .500 12,70 .500 4,76 .187 - - 1,2 .05 - - - -
SNXF120412SNHE 12,70 .500 12,70 .500 4,76 .187 - - 1,2 .05 - - - -
DIE & MOLD
W
Rε
LI
S
Order example:
ISO catalog number: SDCT120404PDFLLE
ANSI catalog number: SDCT431PDFL8LE
Insert grade: KC410M
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B15

Milling Inserts
Grade Selection
First Choice
Alternate Choice
H
S
N
K
M
P
INSERTS
ISO catalog number
ANSI catalog number
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC525M
KC715M
KC725M
KC915M
KC935M
KD1410
KD1415
TN2510
TN5515
TN7525
TN450
TN6510
TN6520
TN6525
TN6540
SNXF See page B32 SNXF1204ZNENLD SNXF43ZNENLD
SNXF1204ZNSNGP SNXF43ZNSNGP
SNXF1204ZNSNHE SNXF43ZNSNHE
FACE MILLING
SPCT See page B75 SPCT10T304PPELLD2 SPCT31251PPEL8LD2
SPCT10T304PPERLD2 SPCT31251PPER8LD2
SPCT10T308PPELLD2 SPCT3125PPEL8LD2
SPCT10T308PPERLD2 SPCT3125PPER8LD2
SPCT10T312PPELLD2 SPCT31253PPEL8LD2
SPCT10T312PPERLD2 SPCT31253PPER8LD2
SPCT10T316ENLD2 SPCT31254ENLD2
SPCT10T320ENLD2 SPCT31255ENLD2
SPCT10T304PPFLLE SPCT31251PPFL8LE
SPCT10T304PPFRLE SPCT31251PPFR8LE
SPCT10T308PPFLLE SPCT3125PPFL8LE
SPCT10T308PPFRLE SPCT3125PPFR8LE
SPCT10T312PPFLLE SPCT31253PPFL8LE
SPCT10T312PPFRLE SPCT31253PPFR8LE
SPCT10T316FNLE SPCT31254FNLE
SPCT10T320FNLE SPCT31255FNLE
SPET10T308PPELGB2 SPET3125PPEL8GB2
SPET10T308PPERGB2 SPET3125PPER8GB2
SPET10T308PPSLGB2 SPET3125PPSL8GB2
SPET10T308PPSRGB2 SPET3125PPSR8GB2
WPM.-HN See page B98 WPMW05X315ZZSRHN WPMW05X315ZZSRHN
WPMW06X415ZZSRHN WPMW06X415ZZSRHN
WPMT080615ZZSRHN WPMT080615ZZSRHN
WPM.-GP See page B98 WPMT05X315ZZSRGP WPMT05X315ZZSRGP
WPMW06X415ZZERGP WPMW06X415ZZERGP
WPMT080615ZZERGP WPMT080615ZZERGP
K313M
K115M
KC410M
KC510M
KC515M
KC520M
KC522M
KC530M
KC715M
KC725M
KC915M
KC935M
KD1410
KD1415
TN2510
TN5515
TN7525
TN450
TN6510
TN6520
TN6525
TN6540
DIE & MOLD
END MILLING
MILLING
SLOTTING / HELICAL
B16
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Milling Inserts
Dimensions
Dimensions
ISO catalog number
LI W S BS Rε L10 BCH
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
SNXF1204ZNENLD 12,70 .500 12,70 .500 4,76 .187 1,0 .04 1,2 .05 - - - - SNXF
SNXF1204ZNSNGP 12,70 .500 12,70 .500 4,76 .187 1,0 .04 1,2 .05 - - - -
SNXF1204ZNSNHE 12,70 .500 12,70 .500 4,76 .187 1,0 .04 1,2 .05 - - - -
W
BS
INSERTS
Rε
LI
S
SPCT10T304PPELLD2 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 0,40 1/64 - - - - SPCT
SPCT10T304PPERLD2 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 0,40 1/64 - - - -
SPCT10T308PPELLD2 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 0,80 1/32 - - - -
SPCT10T308PPERLD2 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 0,80 1/32 - - - -
SPCT10T312PPELLD2 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 1,20 3/64 - - - -
SPCT10T312PPERLD2 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 1,20 3/64 - - - -
W
SPCT10T316ENLD2 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 1,60 1/16 - - - -
SPCT10T320ENLD2 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 2,00 5/64 - - - -
SPCT10T304PPFLLE 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 0,40 1/64 - - - -
R ε
SPCT10T304PPFRLE 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 0,40 1/64 - - - -
SPCT10T308PPFLLE 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 0,80 1/32 - - - -
SPCT10T308PPFRLE 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 0,80 1/32 - - - -
SPCT10T312PPFLLE 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 1,20 3/64 - - - -
SPCT10T312PPFRLE 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 1,20 3/64 - - - -
SPCT10T316FNLE 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 1,60 1/16 - - - -
SPCT10T320FNLE 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 2,00 5/64 - - - -
SPET10T308PPELGB2 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 0,80 1/32 - - - -
SPET10T308PPERGB2 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 0,80 1/32 - - - -
SPET10T308PPSLGB2 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 0,80 1/32 - - - -
SPET10T308PPSRGB2 10,00 .394 10,00 .394 3,97 5/32 2,70 .106 0,80 1/32 - - - -
LI
11°
BS
S
FACE MILLING
MILLING
END MILLING
WPMW05X315ZZSRHN 7,94 .313 - - 3,50 .140 - - 1,50 .059 5,00 .196 - - WPM.-HN
WPMW06X415ZZSRHN 9,53 .375 - - 4,20 .165 - - 1,50 .059 6,00 .236 - -
WPMT080615ZZSRHN 12,70 .500 - - 6,40 .250 - - 1,50 .059 8,00 .315 - -
L10
Rε
11°
LI
S
SLOTTING / HELICAL
WPMT05X315ZZSRGP 7,94 .313 - - 3,50 .140 - - 1,50 .059 5,00 .196 - - WPM.-GP
WPMW06X415ZZERGP 9,53 .375 - - 4,20 .165 - - 1,50 .059 6,00 .236 - -
WPMT080615ZZERGP 12,70 .500 - - 6,40 .250 - - 1,50 .059 8,00 .315 - -
L10
Rε
11°
LI
S
DIE & MOLD
Order example:
ISO catalog number: SNXF1204ZNENLD
ANSI catalog number: SNXF43ZNENLD
Insert grade: TN2510
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B17

KSRM Face Mills
NEW
Indexable Inserts for KSRM
D1
INSERTS
D
7°
S
FACE MILLING
ISO
Catalog number
ANSI
Catalog number
mm
D
inch
mm
D1
inch
mm
H
Dimensions S
N
K
M
S
inch
mm
inch
mm
First Choice
Alternate Choice
inch
P
Chipload min.
fz min.
mm inch
KC522M
KC715M
KC725M
KC935M
RCGT190600ELF RCGT64ELF 19,05 .75 6,5 .256 6,35 .250 - - - - 0,08 .003
RCGT190600SHF RCGT64SHF 19,05 .75 6,5 .256 6,35 .250 - - - - 0,46 .018
RCGT250900ELF RCGT86ELF 25,40 1.00 6,5 .256 9,53 .375 - - - - 0,08 .003
RCGT250900SHF RCGT86SHF 25,40 1.00 6,5 .256 9,53 .375 - - - - 0,70 .027
DIE & MOLD
SLOTTING / HELICAL
END MILLING
MILLING
B18
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSRM Face Mills
RCGT...
NEW
End Mills
Shell Mills
D
K1
D1MAX D2 D1
D
L
AP1
L2
L
D1
D2
D1MAX
AP1
INSERTS
inch
End Mills
Weldon
Shank
D1
Order
number
ANSI
Catalog number
Number
of
Inserts Z
D1
max D2 D D4 L L2 K1 AP1 Insert Ibs.
max.
RPM
1.250 2610667 BMD200R6403W150L200 3 2.000 1.944 1.500 - 4,69 2 - .375 RCGT64... 2.160 29000
inch
D1
Shell Mills
Order
number
ANSI
Catalog number
Number
of
Inserts Z
D1
max D2 D D4 L L2 K1 AP1 Insert
1.750 2610668 BMD250R6404S075L200 4 2.500 2.431 .750 - 2.000 - .312 .375 RCGT64... 1.160 26000
2.250 2610670 BMD300R6405S100L200 5 3.000 2.922 1.000 - 2.000 - .375 .375 RCGT64... 1.780 22000
3.250 2610672 BMD400R6405S125L200 5 4.000 3.912 1.250 - 2.000 - .500 .375 RCGT64... 3.220 18000
3.250 2610683 BMD400R6406S125L200 6 4.000 3.912 1.250 - 2.000 - .500 .375 RCGT64... 3.180 18000
4.250 2610684 BMD500R6406S150L250 6 5.000 4.905 1.500 - 2.500 - .625 .375 RCGT64... 7.160 15000
4.250 2610685 BMD500R6408S150L250 8 5.000 4.905 1.500 - 2.500 - .625 .375 RCGT64... 7.150 15000
5.250 2610686 BMD600R6407S150L250 7 6.000 5.901 1.500 - 2.500 - .625 .375 RCGT64... 9.560 14000
5.250 2610687 BMD600R6408S150L250 8 6.000 5.901 1.500 - 2.500 - .625 .375 RCGT64... 9.600 14000
7.250 2610688 BMD800R6409S250L250 9 8.000 7.874 2.500 4.000 2.500 - 1.000 .375 RCGT64... 13.080 12500
2.000 2610689 BMD300R8603S075L200 3 3.000 2.923 2.000 - 2.000 - .312 .500 RCGT86... 1.220 15500
3.000 2610691 BMD400R8605S125L250 5 4.000 3.899 1.250 - 2.500 - .500 .500 RCGT86... 4.110 12000
4.000 2610697 BMD500R8606S150L250 6 5.000 4.885 1.500 - 2.500 - .625 .500 RCGT86... 6.690 9000
5.000 2610694 BMD600R8607S150L250 7 6.000 5.875 1.500 - 2.500 - .625 .500 RCGT86... 8.760 8800
7.000 2610696 BMD800R8608S250L250 8 8.000 7.863 2.500 4.000 2.500 - 1.000 .500 RCGT86... 11.810 8500
Ibs.
max.
RPM
FACE MILLING
MILLING
END MILLING
inch
Spare Parts
D1 max
Insert
Screw in.-lbs .
Antirotation
Screw
Coolant
Screw
Coolant
Cap
T-handle
Wrench
2.000 MS1162 45 S2160 n/a - TT25 T25
2.500 MS1162 45 S2160 S445CG - TT25 T25
3.000 MS1162 45 S2160 S458CG - TT25 T25
4.000 (3/4"I.C. insert) MS1162 45 S2160 S2162C - TT25 T25
4.000 (1"I.C. insert) MS1162 45 S2160 S2164C - TT25 T25
5.000 MS1162 45 S2160 S2163C - TT25 T25
6.000 MS1162 45 S2160 S2163C - TT25 T25
8.000 MS1162 45 S2160 - MCC-0800-01 TT25 T25
Torx Plus
Size
DIE & MOLD
SLOTTING / HELICAL
Order example:
1x BMD200R6403W150L469
10 x RCGT190600ELF
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B19

KSRM Face Mills
RCGT64 Application Data
END MILLING
FACE MILLING
INSERTS
MILLING
Cutting speed (Vc) – feet/min
Cutting speed (Vc) – feet/min
m/min
400 1200
350 1050
300
250
200
150
100
50
m/min
ft/min
320 1050
270
230
180
140
90
50
ft/min
900
750
600
450
300
150
900
750
600
450
300
150
0 .005 .010
0,13 0,25
Steel Milling Grades
KC935M S
KC725M E
.015
0,38
Stainless Steel Milling Grades
KC935M E
.020
0,51
KC725M E
KC935M E
.025
0,64
KC725M S
.030
0,76
Chipload (fz) – ipt
.035
0,89
.040
1,02
inch
mm
speed
Vc
Starting ft/min
Coolant operating
conditions m/min
KC725M
▼▼ E
▼▼▼
KC935M
▼▼▼E
▼▼▼▼
speed
Vc
Starting ft/min
Coolant operating
conditions m/min
KC725M
▼ S
▼▼
KC725M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
KC935M
▼▼▼ E
▼▼▼▼
550
170
650
200
750
230
800
240
500
150
800
240
chipload
Fz
chipload
Fz
Austenitic
(304, 316)
speed
Vc
speed
Vc
chipload
Fz
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.018 500 .016 380 .015
0,45 150 0,40 110 0,40
.012 700 .012
not
0,30 210 0,30 recommended
Ferritic /
Martensitic
135-330 HB
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.024 400 .022 300 .020
0,60 120 0,55 90 0,50
.022
0,55
.024
0,60
.022
0,55
350HB or High
Alloy content
(15-5, 17-4
stainless, P20)
Dry preferred Wet, reduce speed by 25%
Ferritic /
Martensitic
330-450 HB
0
0
0
.005
0,13
.010
0,25
.015
0,38
.020
0,51
Chipload (fz) – ipt
.025
0,64
.030
0,76
inch
mm
Dry preferred
Wet, reduce speed
by 25%
SLOTTING / HELICAL
DIE & MOLD
m/min
110
Cutting speed (Vc) – feet/min
90
80
60
50
30
20
ft/min
350
300
250
200
150
100
50
High-Temperature Alloys Milling Grades
KC725M E
speed
Vc
Starting ft/min
Coolant operating
conditions m/min
KC725M
▼▼ E
▼▼▼
130
40
chipload
Fz
Titanium
(Ti 6 Al 4 V)
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.010 130 .010 200 .010
0,25 40 0,25 60 0,25
Dry not recommended
Nickel, Cobalt
Alloys (Inconel, Iron Alloys
Hastelloy, (X12NiCrSi3616,
Monel, X2NiCrAlTi3220)
Nimonic)
Wet preferred
50
0
0
.001
0,03
.002
0,05
.003
0,08
.004
0,10
.005
0,13
.006
0,15
Chipload (fz) – ipt
.007
0,18
.008
0,20
inch
mm
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
B20
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSRM Face Mills
RCGT86 Application Data
Cutting speed (Vc) – feet/min
Cutting speed (Vc) – feet/min
m/min
ft/min
400 1200
350 1050
300
250
200
150
100
50
m/min
900
750
600
450
300
150
320 1050
270
230
180
140
90
50
ft/min
900
750
600
450
300
150
0 .005 .010
0,13 0,25
KC935M E
Steel Milling Grades
KC725M E
.015
0,38
.020
0,51
.025
0,64
.030
0,76
.035
0,89
Chipload (fz) – ipt
Stainless Steel Milling Grades
KC935M E
KC725M E
KC935M S
KC725M S
.040
1,02
.045
1,14
.050
1,27
inch
mm
Coolant
Coolant
Starting
operating
conditions
KC725M
▼ S
▼▼
KC725M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
KC935M
▼▼▼ E
▼▼▼▼
KC725M
▼▼ E
▼▼▼
KC935M
▼▼▼E
▼▼▼▼
speed
Vc
ft/min
m/min
550
170
650
200
750
230
800
240
chipload
Fz
350HB or High
Alloy content
(15-5, 17-4
stainless, P20)
Dry preferred Wet, reduce speed by 25%
speed
Vc
Starting ft/min
operating
conditions m/min
500
150
800
240
chipload
Fz
Austenitic
(304, 316)
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.018 500 .016 380 .015
0,45 150 0,40 110 0,40
.012 700 .012
not
0,30 210 0,30 recommended
Ferritic /
Martensitic
135-330 HB
Ferritic /
Martensitic
330-450 HB
MILLING
END MILLING
FACE MILLING
INSERTS
0
0
0
.005
0,13
.010
0,25
.015
0,38
.020
0,51
Chipload (fz) – ipt
.025
0,64
.030
0,76
inch
mm
Dry preferred
Wet, reduce speed
by 25%
m/min
110
Cutting speed (V c ) – feet/min
90
80
60
50
30
20
ft/min
350
300
250
200
150
100
50
High-Temperature Alloys Milling Grades
KC725M E
Coolant
KC725M
▼▼ E
▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
130
40
chipload
Fz
Titanium
(Ti 6 Al 4 V)
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.010 130 .010 200 .010
0,25 40 0,25 60 0,25
Dry not recommended
Nickel, Cobalt
Alloys (Inconel, Iron Alloys
Hastelloy, (X12NiCrSi3616,
Monel, X2NiCrAlTi3220)
Nimonic)
Wet preferred
SLOTTING / HELICAL
DIE & MOLD
50
0
0
.001
0,03
.002
0,05
.003
0,08
.004
0,10
.005
0,13
.006
0,15
Chipload (fz) – ipt
.007
0,18
.008
0,20
inch
mm
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B21

KSOM Mini Face Mills
NEW
Indexable Inserts for KSOM OF.T06L5..
5
4
6
7
3
2
D1
Rε
8
25°
BS
S
BCH
6
7
5
8
4
1
3
2
1
INSERTS
L10
W
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
mm
D1
inch
mm
inch
mm
inch
Dimensions
mm
inch
mm
Rε
inch
First Choice
Alternate Choice
L10 W S BCH
mm
inch
P
Chipload min.
fz min.
mm
inch
KC410M
KC520M
KC522M
KC725M
KC915M
KC935M
OFPT06L5AFENGB OFPT53AFEN4GB 8 5,5 .217 6 .236 14,7 .579 5 .197 0,8 .031 0,1 .004 0,15 .006
OFPT06L5AFSNHB OFPT53AFSN4HB 8 5,5 .217 6 .236 14,7 .579 5 .197 0,8 .031 0,2 .008 0,28 .011
OFKT06L5AFENGB OFKT53AFEN4GB 8 5,5 .217 6 .236 14,7 .579 5 .197 0,8 .031 0,1 .004 0,15 .006
OFKT06L5AFSNHB OFKT53AFSN4HB 8 5,5 .217 6 .236 14,7 .579 5 .197 0,8 .031 0,2 .008 0,28 .011
OFKT06L5AFFNLNJ OFKT53AFFN4LNJ 8 5,5 .217 6 .236 14,7 .579 5 .197 0,8 .031 - - 0,15 .006
H
S
N
K
M
BS
OFKT06L5AFENLB OFKT53AFEN6LB 8 5,5 .217 6 .236 14,7 .579 5 .197 0,8 .031 1,2 .047 0,2 .008
DIE & MOLD
SLOTTING / HELICAL
FACE MILLING
END MILLING
MILLING
Order example:
1x 32D03R040B32SOF04
10 x OFPT06L5AFENGB
B22
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSOM Mini Face Mills
OF.T06L5..
NEW
End Mills
Shell Mills
D6
D
K1
D1MAX
D1
D
L
AP1
45°
L2
L
D1
D1MAX
45°
AP1
INSERTS
metric
D1
End Mills
Order
number
ISO
Catalog number
Number
of
Inserts Z
Weldon
Shank
D1
max.
D D6 L L2 AP1 Insert
32 2462846 32D03R040B32SOF04 3 41,1 32 - 100 40 3,5 OF.T06 0,6 19890
40 2488093 40D04R050B32SOF04 4 49,0 32 - 110 50 3,5 OF.T06 0,7 15920
Kg
max.
RPM
metric
D1
Shell Mills
Order
number
ISO
Catalog number
Number
of
Inserts Z
D1
max.
D D6 L K1 AP1 Insert
50 2487015 50A06RS45OF06A 6 58,9 22 42 43 10,40 3,5 OF.T06 0,40 12730
63 2462847 63A07RS45OF06A 7 71,8 22 54 43 10,40 3,5 OF.T06 0,70 10110
80 2465247 80A09RS45OF06A 9 88,7 27 64 50 12,40 3,5 OF.T06 1,20 7960
100 2462848 100B10RS45OF06A 10 108,6 32 84 50 14,40 3,5 OF.T06 2,10 6370
125 2488094 125B12RS45OF06A 12 133,6 40 94 63 16,40 3,5 OF.T06 3,00 5090
160 2488095 160C16RS45OF06A 16 168,5 40 114 63 16,40 3,5 OF.T06 4,70 3980
Kg
max.
RPM
FACE MILLING
inch
D1
End Mills
Order
number
ANSI
Catalog number
Number
of
Inserts Z
Weldon
Shank
D1
max
D D6 L L2 AP1 Insert
1.25 2489444 KISR125OF5345F5 3 1.610 1.250 - 4.530 2.250 .138 OF.T06 1.5 20050
1.50 2489445 KISR150OF5345F5 4 1.854 1.250 - 4.530 2.250 .138 OF.T06 1.6 16710
Ibs.
max.
RPM
MILLING
END MILLING
inch
D1
Order
number
ANSI
Catalog number
2.0 2465323 KFSR200OF5345F3 6 2.350 .75 1.750 1.570 .320 .138 OF.T06 .9 12530
2.5 2489446 KFSR250OF5345F3 7 2.846 .75 2.140 1.570 .320 .138 OF.T06 1.5 10030
3.0 2465324 KFSR300OF5345F4 9 3.343 1.00 2.190 1.750 .390 .138 OF.T06 2.0 8350
4.0 2489447 KFSR400OF5345F5 10 4.339 1.25 2.880 1.750 .520 .138 OF.T06 3.2 6270
5.0 2489448 KFSR500OF5345F6 12 5.337 1.50 3.810 2.380 .650 .138 OF.T06 6.4 5010
6.0 2489449 KFSR600OF5345F8 16 6.336 2.00 4.880 2.380 .770 .138 OF.T06 9.6 4180
Spare
Parts
Shell Mills
Number
of
Inserts Z
D1
max
D D6 L K1 AP1 Insert
Ibs.
max.
RPM
SLOTTING / HELICAL
D1
Clamping
Screw
Nm
in.-lbs .
Clamping
Wedge
Wedge
Screw
Nm
in.-lbs .
T-Handle
Wrench
Torx
Plus
Size
Mounting
Screw
Mounting
Screw
Mounting
Screw with
Coolant
Clamping
Screw with
Coolant
metric
32 193.433 6 470.264 193.434 6 TTP15 15 - - - - - -
40 193.433 6 470.264 193.434 6 TTP15 15 - - - - - -
50 193.433 6 470.264 193.434 6 TTP15 15 129.025 - MS2072OG - - -
63 193.433 6 470.264 193.434 6 TTP15 15 125.025 - - 420.100 - -
80 193.433 6 470.264 193.434 6 TTP15 15 125.230 - - 420.120 - -
100 193.433 6 470.264 193.434 6 TTP15 15 - 190.977 - 420.160 - -
125 193.433 6 470.264 193.434 6 TTP15 15 - 191.040 - 420.200 470.232 125.512
160 193.433 6 470.264 193.434 6 TTP15 15 - 191.040 - 420.200 470.233 125.620
inch
1.25 193.433 53 470.264 193.434 53 TTP15 15 - - - - - -
1.50 193.433 53 470.264 193.434 53 TTP15 15 - - - - - -
2.00 193.433 53 470.264 193.434 53 TTP15 15 S-445 - S445CG - - -
2.50 193.433 53 470.264 193.434 53 TTP15 15 S-445 - - 420.101 - -
3.00 193.433 53 470.264 193.434 53 TTP15 15 S-448 - - 420.121 - -
4.00 193.433 53 470.264 193.434 53 TTP15 15 - KLS12 - 420.162 - -
5.00 193.433 53 470.264 193.434 53 TTP15 15 - KLS15 - 420.201 470.240 125.412
6.00 193.433 53 470.264 193.434 53 TTP15 15 - KLS20 - 420.241 470.241 125.516
Coolant
Cap
Coolant
Cap
Screw
DIE & MOLD
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B23

KSOM Mini Face Mills
OF.T06L5 Application Data
INSERTS
FACE MILLING
Cutting speed (Vc) – feet/min
m/min
400 1200
350 1050
300
250
200
150
100
50
ft/min
900
750
600
450
300
150
KC
522M E
KC725M E
0 .004 .008
0,10 0,20
Steel Milling Grades
KC935M E
.012
0,30
KC725M S
.016
0,41
KC522M S
KC935M S
.020
0,51
.024
0,61
Chipload (fz) – ipt
.028
0,71
.032
0,81
inch
mm
Coolant
KC725M
▼ S
▼▼
KC725M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
KC935M
▼▼▼ E
▼▼▼▼
KC522M
▼ S
▼▼
KC522M
▼▼ E
▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
650
200
750
230
850
260
1000
300
700
210
800
chipload
Fz
240 0,25
350HB or High
Alloy content
(15-5, 17-4
stainless, P20)
Dry preferred Wet, reduce speed by 25%
END MILLING
MILLING
SLOTTING / HELICAL
m/min ft/min
320 1050
Cutting speed (Vc) – feet/min
270
230
180
140
90
50
0
900
750
600
450
300
150
0
Stainless Steel Milling Grades
KC935M E
0 .004 .008
0,10 0,20
KC522M E
KC725M E
.012
0,30
.016
0,41
.020
0,51
.024
0,61
Chipload (fz) – ipt
.028
0,71
.032
0,81
inch
mm
Coolant
KC725M
▼▼ E
▼▼▼
KC522M
▼▼ E
▼▼▼
KC935M
▼▼▼ E
▼▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
600
180
650
200
800
240
chipload
Fz
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.010 500 .009 380 .009
0,25 150 0,25 110 0,25
.010 550 .009 400 .009
0,25 170 0,25 120 0,25
.008
0,20
Austenitic
(304, 316)
700
210
.008
0,20
Ferritic /
Martensitic
135-330 HB
not
recommended
Ferritic /
Martensitic
330-450 HB
Dry preferred Wet, reduce speed by 25%
DIE & MOLD
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
B24
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSOM Mini Face Mills
OF.T06L5 Application Data
m/min ft/min
320 1050
Cutting speed (Vc) – feet/min
270
230
180
140
90
50
0
900
750
600
450
300
150
0
KC915M E
KC935M E
0 .004 .008
0,10 0,20
Cast Iron Milling Grades
KC
522M E
KC520M E
.012
0,30
KC935M S
.016
0,41
Chipload (fz) – ipt
KC915M S
.020
0,51
.024
0,61
inch
mm
Coolant
KC522M
▼▼ E
▼▼▼
KC520M
▼▼ E
▼▼▼
KC935M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
KC915M
▼▼▼S
▼▼▼▼
KC915M
▼▼▼ E
▼▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
chipload
Fz
400
120
.012
0,30
600 .010
180 0,25
600
180
.010
0,25
500
150
.015
0,40
800 .008
240 0,20
900
270
.008
0,20

KSOM Mini Application
OF.T06L5
Ramping
Metric version
Inch version
Plunging length = tangent of plunging angle
D1
mm
D1
max.
mm
max.
ap
mm
Ramping
Angle
(°)
Ramping
Length
mm
D1
inch
D1
max.
inch
max.
ap
inch
Ramping
Angle
(°)
Ramping
Length
inch
INSERTS
D1
D1max.
a pmax.
Ramping angle
32 41,1 9 11,0 46,3
40 49,0 9 7,5 68,4
50 58,9 9 5,0 102,9
63 71,8 9 3,9 132,0
80 88,7 9 2,9 177,7
100 108,6 9 2,2 234,3
125 133,6 9 1,7 303,2
160 168,5 9 1,3 396,6
1.25 1.61 .354 11,0 1.82
1.50 1.85 .354 8,0 2.52
2.00 2.35 .354 5,2 3.89
2.50 2.85 .354 3,8 5.34
3.00 3.34 .354 3,0 6.76
4.00 4.34 .354 2,1 9.66
5.00 4.34 .354 1,6 12.69
6.00 6.34 .354 1,3 15.61
FACE MILLING
Helical Interpolation
AP/Rev.
D1
D1max.
Hole diameter
Metric version
D1
mm
D1
max.
mm
Hole
Diameter
min. max.
mm mm
AP/Rev.
mm
32 41,1 61,7 81,7 4,7
40 49,0 77,5 97,6 4,7
50 58,9 97,4 117,4 4,7
63 71,8 123,3 143,3 4,7
80 88,7 157,2 177,2 4,7
100 108,6 197,2 217,1 4,7
125 133,6 247,1 267,0 4,7
160 168,5 317,1 377,0 4,7
Inch version
D1
inch
D1
max.
inch
Hole
Diameter
min. max.
inch inch
AP/Rev.
inch
1.25 1.61 2.41 3.20 .185
1.50 1.85 2.91 3.69 .185
2.00 2.35 3.90 4.68 .185
2.50 2.85 4.93 5.68 .185
3.00 3.34 5.89 6.68 .185
4.00 4.34 7.89 8.67 .185
5.00 4.34 9.89 10.67 .185
6.00 6.34 11.89 12.67 .185
END MILLING
MILLING
Plunging
Max. Plunging
Depth AP1 MAX
mm
inch
AP1 MAX 3,50 .14
SLOTTING / HELICAL
AP1MAX
DIE & MOLD
Face Milling
Max. DOC AP [mm]
mm
inch
Chipload (fz)
AP1 MAX 3,5 .138 1 x fz
AP2 MAX 9,0 .35 0,6 x fz
AP1
AP2MAX
B26
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSOM Application
OF.T07L6
Ramping
Metric version
Inch version
Plunging length = tangent of plunging angle
D1
mm
D1
max.
mm
max
ap
mm
Ramping
Angle
(°)
Ramping
Length
mm
D1
inch
D1
max.
inch
max
ap
inch
Ramping
Angle
(°)
Ramping
Length
inch
D1
D1max.
a pmax.
Ramping angle
63 74,2 11,7 5,5 121,5
80 91,1 11,7 4,0 167,3
100 111,0 11,7 3,0 223,2
125 135,9 11,7 2,3 291,3
160 170,8 11,7 1,7 394,2
2.50 2.94 .46 5.5 4.78
3.00 3.44 .46 4.2 6.27
4.00 4.43 .46 2.9 9.09
5.00 5.43 .46 2.2 11.99
6.00 6.43 .46 1.8 14.65
INSERTS
Helical Interpolation
AP/Rev.
Metric version
D1
mm
D1
max.
mm
Hole
Diameter
min. max.
mm mm
AP/Rev.
mm
63 74,2 122,7 145,0 6,3
80 91,1 156,6 178,0 6,3
100 111,0 196,5 218,7 6,3
125 135,9 246,4 268,7 6,3
160 170,8 316,3 338,6 6,3
Inch version
D1
inch
D1
max.
inch
Hole
Diameter
min. max.
inch inch
AP/Rev.
inch
2.50 2.94 4.872 5.748 .248
3.00 3.44 5.868 6.744 .248
4.00 4.43 7.863 8.739 .248
5.00 5.43 9.859 10.736 .248
6.00 6.43 11.857 12.733 .248
FACE MILLING
D1
D1max.
Hole diameter
MILLING
END MILLING
Plunging
Max. Plunging
Depth AP1 MAX
mm
inch
AP1 MAX 4,2 .17
AP1MAX
SLOTTING / HELICAL
Face Milling
Max. DOC AP [mm]
mm
inch
Chipload (fz)
AP1 MAX 5,0 .20 1 x fz
AP2 MAX 11,7 .46 0,6 x fz
DIE & MOLD
AP1
AP2MAX
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B27

KSOM Face Mills
Indexable Inserts for KSOM OFKT07L6..
5
4
6
7
3
2
D1
Rε
8
25°
BS
S
BCH
6
7
5
8
4
1
3
2
1
INSERTS
L10
W
FACE MILLING
metric
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
mm
D1
inch
mm
inch
mm
inch
Dimensions
mm
inch
mm
Rε
inch
First Choice
Alternate Choice
L10 W S BCH
mm
inch
P
Chipload min.
fz min.
mm
H
S
N
K
M
inch
KC410M
KC520M
KC522M
KC725M
KC915M
KC935M
OFKT07L6AFENGB OFKT64AFEN6GB 8 5,5 .217 7,5 .295 18,7 .735 6 .236 1,2 .047 0,1 .004 0,2 .008
OFKT07L6AFSNHB OFKT64AFSN6HB 8 5,5 .217 7,5 .295 18,7 .735 6 .236 1,2 .047 0,2 .008 0,36 .014
OFKT07L6AFFNLNJ OFKT64AFFN6LNJ 8 5,5 .217 7,5 .295 18,7 .735 6 .236 1,2 .047 - - 0,2 .008
OFPT07L6AFENGB OFPT64AFEN6GB 8 5,5 .217 7,5 .295 18,7 .735 6 .236 1,2 .047 0,1 .004 0,2 .008
OFPT07L6AFSNHB OFPT64AFSN6HB 8 5,5 .217 7,5 .295 18,7 .735 6 .236 1,2 .047 0,2 .008 0,35 .014
BS
END MILLING
MILLING
OFKT07L6AFENLB OFKT64AFEN6LB 8 5,5 .217 7,5 .295 18,7 .735 6 .236 1,2 .047 2,1 .083 0,13 .005
NEW
DIE & MOLD
SLOTTING / HELICAL
Order example:
1x 63A07RF45OF07A
10 x OFKT07L6AFENGB
B28
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSOM Face Mills
OF.T07.. Wedge Clamping
Wedge Clamping
D6
D
K1
Screw Clamping
D6
D
K1
L
L
D1
D1MAX
45° AP1MAX
AP1
D1
D1MAX
45° AP1MAX
AP1
INSERTS
metric
D1
Order
number
ISO
Catalog number
63 2252910 63A07RF45OF07A 7 74,2 22 54 43 10,5 5 11,7 OF.T07 0,7 7580
80 2255272 80A09RF45OF07A 9 91,1 27 64 50 12,5 5 11,7 OF.T07 1,3 5970
100 2255333 100B11RF45OF07A 11 111,0 32 84 50 14,5 5 11,7 OF.T07 1,9 4770
125 2255334 125B13RF45OF07A 13 135,9 40 94 63 16,5 5 11,7 OF.T07 3,1 3828
160 2255335 160C17RF45OF07A 17 170,8 40 114 63 16,5 5 11,7 OF.T07 4,4 2980
metric
D1
Shell Mills
Shell Mills
Order
number
Wedge Clamping
Screw Clamping
ISO
Catalog number
Number
of
Inserts Z
Number
of
Inserts Z
D1
max.
D1
max.
AP1
D D6 L K1 AP1 max. Insert
D D6 L K1 AP1
63 2250670 63A05RS45OF07A 5 74,2 22 54 43 10,5 5 11,7 OF.T07 0,6 10100
80 2228047 80A06RS45OF07A 6 91,1 27 64 50 12,5 5 11,7 OF.T07 1,1 7900
100 2213791 100B08RS45OF07A 8 111,0 32 84 50 14,5 5 11,7 OF.T07 1,7 6300
125 2252793 125B10RS45OF07A 10 135,9 40 94 63 16,5 5 11,7 OF.T07 2,9 5000
160 2241172 160C12RS45OF07A 12 170,8 40 114 63 16,5 5 11,7 OF.T07 4,1 3900
AP1
max.
Insert
Kg
Kg
max.
RPM
max.
RPM
FACE MILLING
inch
Shell Mills
Wedge Clamping
D1
D1
Order
number
Order
number
ANSI
Catalog number
ANSI
Catalog number
Number
of
Inserts Z
Number
of
Inserts Z
D1
max.
D1
max.
D D6 L K1 AP1
2.500 2405632 KFWR250OF6445M3 7 2.94 .75 2.14 1.75 .32 .20 .461 OF.T07 0.70 7520
3.000 2405673 KFWR300OF6445M4 9 3.44 1.00 2.19 1.75 .39 .20 .461 OF.T07 1.10 6270
4.000 2405674 KFWR400OF6445M5 11 4.44 1.25 2.88 1.75 .51 .20 .461 OF.T07 1.70 4700
5.000 2405675 KFWR500OF6445M6 13 5.43 1.50 3.81 2.38 .65 .20 .461 OF.T07 2.86 3760
6.000 2405676 KFWR600OF6445M8 17 6.43 2.00 4.88 2.38 .77 .20 .461 OF.T07 4.54 3130
inch
Shell Mills
Screw Clamping
D D6 L K1 AP1
2.500 2252794 KFSR250OF6445M3 5 2.94 .75 2.14 1.75 .33 .20 .461 OF.T07 1.50 10100
3.000 2252795 KFSR300OF6445M4 6 3.44 1.00 2.19 1.75 .39 .20 .461 OF.T07 1.80 7900
4.000 2252796 KFSR400OF6445M5 8 4.44 1.25 2.88 1.75 .52 .20 .461 OF.T07 3.10 6300
5.000 2252797 KFSR500OF6445M6 10 5.43 1.50 3.81 2.38 .65 .20 .461 OF.T07 6.10 5000
6.000 2252798 KFSR600OF6445M8 12 6.43 2.00 4.88 2.38 .77 .20 .461 OF.T07 9.20 3900
AP1
max.
AP1
max.
Insert
Insert
Ibs.
Ibs.
max.
RPM
max.
RPM
MILLING
END MILLING
SLOTTING / HELICAL
Spare
Parts
Insert clamping
Wedge clamping
Tool clamping without
coolant
Tool clamping with coolant
D1
Screw
Insert
Nm
in.-lbs .
Nm
Wedge Screw in.-lbs . Screw
Nm
in.-lbs .
Clamping
Screw
Nm
in.-lbs .
metric
63 193.409 6 470.257 193.409 6 125.025 40 420.100 40 - - -
80 193.409 6 470.257 193.409 6 125.230 90 420.120 90 - - -
100 193.409 6 470.257 193.409 6 190.977 110 420.160 110 - - -
125 193.409 6 470.257 193.409 6 191.040 130 420.200 130 470.232 129.512 10
160 193.409 6 470.257 193.409 6 191.040 130 420.200 130 470.233 125.620 15
inch
2.500 193.409 53 470.257 193.409 53 S445 354 420.101 354 - - -
3.000 193.409 53 470.257 193.409 53 S458 797 420.121 797 - - -
4.000 193.409 53 470.257 193.409 53 KLS12 974 420.161 974 - - -
5.000 193.409 53 470.257 193.409 53 KLS15 1150 420.201 1150 470.240 125.412 89
6.000 193.409 53 470.257 193.409 53 KLS20 1150 420.241 1150 470.241 125.516 133
Coolant
Cap
Screw
Coolant
Cap
Screw
Nm
in.-lbs.
DIE & MOLD
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B29

KSOM Face Mills
OF.T07L6 Application Data
INSERTS
FACE MILLING
Cutting speed (V c ) – feet/min
m/min
ft/min
400 1200
350 1050
300
250
200
150
100
50
900
750
600
450
300
150
KC522M E
0 .004 .008
0,10 0,20
Steel Milling Grades
KC935M E
KC
725M E
.012
0,30
.016
0,41
.020
0,51
.024
0,61
Chipload (f z ) – ipt
KC522M S
KC725M S
KC935M S
.028
0,71
.032
0,81
inch
mm
Coolant
KC725M
▼ S
▼▼
KC725M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
KC935M
▼▼▼ E
▼▼▼▼
KC522M
▼ S
▼▼
KC522M
▼▼ E
▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
650
200
750
230
750
230
1000
300
700
210
800
240
chipload
Fz
350HB or High
Alloy content
(15-5, 17-4
stainless, P20)
Dry preferred Wet, reduce speed by 25%
END MILLING
MILLING
SLOTTING / HELICAL
m/min ft/min
320 1050
Cutting speed (Vc) – feet/min
270
230
180
140
90
50
0
900
750
600
450
300
150
0
0 .004 .008
0,10 0,20
Stainless Steel Milling Grades
KC935M E
KC522M E
KC725M E
.012
0,30
.016
0,41
.020
0,51
.024
0,61
Chipload (fz) – ipt
.028
0,71
.032
0,81
inch
mm
Coolant
KC725M
▼▼ E
▼▼▼
KC522M
▼▼ E
▼▼▼
KC935M
▼▼▼ E
▼▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
600
180
650
200
800
240
chipload
Fz
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.014 500 .012 380 .010
0,35 150 0,30 110 0,25
.014 550 .012 400 .010
0,35 170 0,30 120 0,25
.010
0,25
Austenitic
(304, 316)
700
210
.008
0,20
Ferritic /
Martensitic
135-330 HB
not
recommended
Ferritic /
Martensitic
330-450 HB
Dry preferred Wet, reduce speed by 25%
DIE & MOLD
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
B30
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSOM Face Mills
OF.T07L6 Application Data
m/min ft/min
320 1050
Cutting speed (Vc) – feet/min
270
230
180
140
90
50
0
900
750
600
450
300
150
0
KC915M E
0 .004 .008
0,10 0,20
Cast Iron Milling Grades
KC522M E
KC520M E
KC935M E
.012
0,30
.016
0,41
KC935M S
.020
0,51
.024
0,61
Chipload (fz) – ipt
KC
915M S
.028
0,71
.032
0,81
inch
mm
Coolant
KC522M
▼▼ E
▼▼▼
KC520M
▼▼ E
▼▼▼
KC935M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
KC915M
▼▼▼S
▼▼▼▼
KC915M
▼▼▼ E
▼▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
chipload
Fz
400
120
.016
0,40
600 .013
180 0,35
600
180
.013
0,35
600
180
.020
0,50
800 .016
240 0,40
900
270
.010
0,25

M780 Face Mills
NEW
Inserts for M780 SNFX1204
-ZN
BS
W
W
INSERTS
Rε
LI
S
Rε
LI
S
FACE MILLING
metric
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
mm
LI
inch
mm
Dimensions
W S Rε
inch
mm
First Choice
Alternate Choice
TN2510
TN5515
TN7525
TN450
TN6510
TN6520
TN6525
TN6540
SNXF120412ENLD SNXF433ENLD 8 12,7 .50 12,7 .50 4,76 .187 1,2 .05 - - - - 0,1 .004
SNXF120412SNGP SNXF433SNGP 8 12,7 .50 12,7 .50 4,76 .187 1,2 .05 - - - - 0,1 .004
SNXF120412SNHE SNXF433SNHE 8 12,7 .50 12,7 .50 4,76 .187 1,2 .05 - - - - 0,1 .004
inch
BS
mm inch mm inch
mm
inch
H
S
N
K
M
P
Chipload min.
fz min.
mm
inch
SNXF1204ZNENLD SNXF43ZNENLD 8 12,7 .50 12,7 .50 4,76 .187 1,2 .05 1,0 .04 - - 0,1 .004
SNXF1204ZNSNGP SNXF43ZNSNGP 8 12,7 .50 12,7 .50 4,76 .187 1,2 .05 1,0 .04 - - 0,1 .004
SNXF1204ZNSNHE SNXF43ZNSNHE 8 12,7 .50 12,7 .50 4,76 .187 1,2 .05 1,0 .04 - - 0,1 .004
DIE & MOLD
SLOTTING / HELICAL
END MILLING
MILLING
Order example:
1x 63A09RF84SN12B
10 x SNXF120412ENLD
B32
To place an order, contact your Kennametal representative or visit www.kennametal.com.

M780 OctaCut Face Mills
Steel and Cast Iron Machining
NEW
D6
D
with
coolant cap
84°
L
D1
D1 max
AP1
with
coolant screw
INSERTS
metric
Shell Mills
D1
Order
number
ISO
Catalog number old
ISO
Catalog number new
Number
of
Inserts Z
D1
max.
D D6 L AP1 Insert
Right
63 2465831 63A09RF84SN12B 1 239 78 004 00 9 65 22 50 40 5 SNXF1204... 7600 0,60
80 2443937 80A12RF84SN12B 1 239 78 006 00 12 82 27 60 50 5 SNXF1204... 6000 1,25
100 2443938 100B15RF84SN12B 1 239 78 008 00 15 102 32 78 50 5 SNXF1204... 4800 1,75
125 2465832 125B18RF84SN12B 1 239 78 010 00 18 127 40 89 63 5 SNXF1204... 3800 3,10
160 2466093 160C24RF84SN12B 1 239 78 012 00 24 162 40 90 63 5 SNXF1204... 3000 3,90
200 2466094* 200C30RF84SN12B 1 239 78 014 00 30 202 60 130 63 5 SNXF1204... 2400 6,40
250 2466095* 250C36RF84SN12B 1 239 78 016 00 36 252 60 130 63 5 SNXF1204... 1900 10,00
Left
63 2466096* 63A09LF84SN12B 1 239 78 005 00 9 65 22 50 40 5 SNXF1204... 7600 0,60
80 2466097* 80A12LF84SN12B 1 239 78 007 00 12 82 27 60 50 5 SNXF1204... 6000 1,25
100 2466098* 100B15LF84SN12B 1 239 78 009 00 15 102 32 78 50 5 SNXF1204... 4800 1,75
125 2466099* 125B18LF84SN12B 1 239 78 011 00 18 127 40 89 63 5 SNXF1204... 3800 3,10
160 2466100* 160C24LF84SN12B 1 239 78 013 00 24 162 40 90 63 5 SNXF1204... 3000 3,90
200 2466101* 200C30LF84SN12B 1 239 78 015 00 30 202 60 130 63 5 SNXF1204... 2400 6,40
250 2466102* 250C36LF84SN12B 1 239 78 017 00 36 252 60 130 63 5 SNXF1204... 1900 10,00
max.
RPM
Weight
(Kg)
FACE MILLING
inch
D1
Shell Mills
Order
number
ANSI
Catalog number old
ANSI
Catalog number new
Number
of
Inserts Z
D1
max.
D D6 L AP1 Insert
Right
2.5 2476832 KSSR250SN434M3 1 539 78 004 00 9 2.579 0.750 1.770 1.500 .200 SNXF43... 7500 1.100
3.0 2476963 KSSR300SN434M4 1 539 78 006 00 11 3.079 1.000 2.200 1.750 .200 SNXF43... 6300 2.000
4.0 2476964 KSSR400SN434M5 1 539 78 008 00 15 4.079 1.250 2.870 1.750 .200 SNXF43... 4700 3.100
5.0 2476965 KSSR500SN434M6 1 539 78 010 00 18 5.079 1.500 3.820 2.380 .200 SNXF43... 3800 7.300
6.0 2476966 KSSR600SN434M8 1 539 78 012 00 23 6.079 2.000 4.880 2.380 .200 SNXF43... 3100 10.100
8.0 2476967* KSSR800SN434M10 1 539 78 014 00 30 8.079 2.500 5.120 2.380 .200 SNXF43... 2300 13.900
10.0 2476968* KSSR1000SN434M10 1 539 78 016 00 36 10.079 2.500 5.120 2.380 .200 SNXF43... 1900 21.000
Left
2.5 2476969* KSSL250SN434M3 1 539 78 005 00 9 2.579 0.750 1.770 1.500 .200 SNXF43... 7500 1.100
3.0 2476970* KSSL300SN434M4 1 539 78 007 00 11 3.079 1.000 2.200 1.750 .200 SNXF43... 6300 2.000
4.0 2476971* KSSL400SN434M5 1 539 78 009 00 15 4.079 1.250 2.870 1.750 .200 SNXF43... 4700 3.100
5.0 2476972* KSSL500SN434M6 1 539 78 011 00 18 5.079 1.500 3.820 2.380 .200 SNXF43... 3800 7.300
6.0 2476973* KSSL600SN434M8 1 539 78 013 00 23 6.079 2.000 4.880 2.380 .200 SNXF43... 3100 10.100
8.0 2476974* KSSL800SN434M10 1 539 78 015 00 30 8.079 2.500 5.120 2.380 .200 SNXF43... 2300 13.900
10.0 2476975* KSSL1000SN434M10 1 539 78 017 00 36 10.079 2.500 5.120 2.380 .200 SNXF43... 1900 21.000
max.
RPM
Weight
(Ibs.)
MILLING
END MILLING
SLOTTING / HELICAL
Spare Parts
D1
mm (inch)
Wedge
Wedge Screw
Coolant Screw
metric
Coolant Cap
metric
Wrench
63 (2.5) 1 274 83 582 00 1 274 86 009 00 420.100 - 1 214 80 449 00
80 (3.0) 1 274 83 582 00 1 274 86 009 00 420.120 - 1 214 80 449 00
100 (4.0) 1 274 83 582 00 1 274 86 009 00 420.163 - 1 214 80 449 00
125 (5.0) 1 274 83 582 00 1 274 86 009 00 420.200 470.232 1 214 80 449 00
160 (6.0) 1 274 83 582 00 1 274 86 009 00 420.200 470.233 1 214 80 449 00
200 (8.0) 1 274 83 582 00 1 274 86 009 00 - 470.234 1 214 80 449 00
250 (10.0) 1 274 83 582 00 1 274 86 009 00 - 470.235 1 214 80 449 00
Coolant screw and coolant cap, please order separately.
* Non stock standard.
DIE & MOLD
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B33

M780 Face Mills
Application Data
INSERTS
m/min ft/min
480 1600
Cutting speed (Vc) – feet/min
420 1400
360 1200
300 1000
240
180
120
60
0
800
600
400
200
0
TN5515 E
0 .002 .004
0,05 0,10
Cast Iron Milling Grades
TN2510 E
.006
0,15
.008
0,20
TN7525S/TN6520
.010
0,25
.012
0,30
Chipload (fz) – ipt
.014
0,36
TN5515S/TN6510
.016
0,41
.018
0,46
inch
mm
Starting
Coolant operating
conditions
TN7525/TN6520
▼▼ S
▼▼▼
TN5515/TN6510
▼▼ S
▼▼▼
TN5515
▼▼▼ E
▼▼▼▼
TN2510
▼▼▼ E
▼▼▼▼
speed
Vc
625
190
750
230
1100
330
1250
380
chipload
Fz
.012
0,30
.010
0,25
.008
0,20
.006
0,15

M780
Steel and Cast Iron Machining
Highest volume/minute
... Roughing/finishing
... M780
B35

FIX-PERFECT Aluminum
NEW
Indexable Inserts BGHX
24°
90°
L10
LI
INSERTS
BS
S BCH
FACE MILLING
metric
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
mm
LI
S
Dimensions
BS BCH L10
First Choice
Alternate Choice
inch mm inch mm inch mm inch mm inch
Edge prep
BGHX15L5PCSRLET BGHX15L5PCSRLET 1 5 .197 5 .197 0,9 .035 0,6 .024 10,5 .157 hone
H
S
N
K
M
P
KD1410
KD1415
END MILLING
MILLING
SLOTTING / HELICAL
Cutting speed (Vc) – feet/min
m/min ft/min
1350 4500
1200 4000
1050 3500
900 3000
750 2500
600 2000
450 1500
300 1000
150 500
0 0
0 .002
0,05
Non-Ferrous Milling Grades
.004
0,10
.006
0,15
KD1410 E
.008
0,20
KD1415 E
.010
0,25
.012
0,30
Chipload (fz) – ipt
.014
0,35
.016
0,40
.018 inch
0,46 mm
Coolant
KD1415
▼▼ E
KD1410
▼▼ E
speed
Vc
12050
3675
13645
4160
Si12%
chipload
Fz
Starting ft/min inch ft/min inch
operating
conditions m/min mm m/min mm
Dry preferred
.01
0,25
.01
0,25
This new insert is designed to evacuate chips better and to reduce the possibility of the PCD chipping.
This generally results in much better surface finishes and tool life.
DIE & MOLD
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
B36
To place an order, contact your Kennametal representative or visit www.kennametal.com.

FIX-PERFECTNon-Ferrous Metals
Aluminum Face Milling
• Roughing and finishing in one operation
with adjustable insert seats
• Precision balanceable cutter bodies
produce mirror-finish surfaces
• Higher feed rates – lower forces – better finishes
• Polished faces lead to longer tool life
• Carbide inserts and PCD inserts can be
used together in the same body
• Excellent reliability up to 4500 m/min (13,500 sfm)
B37

KSCM Face Mills
NEW
Cartridges KSCM...
-90° UN -75° UN -75° HR ..75° QF ..75° PT
INSERTS
90° AP1MAX
75° AP1MAX
75° AP1MAX
75° AP1MAX
75° AP1MAX
FACE MILLING
metric
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
AP1MAX
First Choice
Alternate Choice
KSCMCA90UN KSCMCA90UN 1 3
KSCMCA75UN KSCMCA75UN 1 3
KSCMCA75HR KSCMCA75HR 1 5
KSCMCA75QF KSCMCA75QF 1 3
KSCMCA75PT KSCMCA75PT 1 3
H
S
N
K
M
P
KD1420
END MILLING
MILLING
SLOTTING / HELICAL
Cutting speed (Vc) – 4000 m/min
m/min ft/min
6800 22100
6000 19500
4800 15600
3600 11700
2400
1200
0
7800
3900
0
0 .002 .004
0,05 0,10
Non-Ferrous Milling Grades
KD1420 F
.006
0,15
.008
0,20
.010
0,25
.012
0,30
Chipload (fz) – ipt
.014
0,36
.016
0,41
.018 inch
0,46 mm
Coolant Operation
KD1420
▼▼ F
speed
Vc
ft/min
m/min
chipload
Fz
12050 .004
3675 0,1
Si12%
DIE & MOLD
Ra 0,180
Rt 2,760
Rz 0,630
Wt 1,130
Ra 0,240
Rt 2,100
Rz 0,120
Wt 1,770
Operation: Face Milling Cutter Diameter: 125 mm
Workpiece: Cylinder Head Number of Teeth: 15
Material: AlSi-12Cu Cartridge KSCM: 75° UN
Cutting Conditions:
Vc : 4000 m/min.
vf = 12000 mm/min.
z = 15
fz = 0,08mm/z
ap = 2,5 - 3 mm
n = 10000 rpm
B38
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSCM Face Mills
Aluminum Machining
NEW
*Monoblock
Shell Mills
D6
D4
D2
K1
D1
D
L
AP1MAX
L1
L
D1
AP1MAX
INSERTS
metric
Shell Mill Bodies
D1
Catalog number
Right hand
* Monoblock HSK63A
** Bi-Metalic cutter body
Number
of
Inserts Z D
D4 D6 L L1 K1 AP1MAX Kg
63* KSCM63R08CAH63A100 8 - - - 122 90 - 3 1,8
80 KSCM80R10CAB27 10 27 - 63,0 50 - 12,4 3 1,3
100** KSCM100R12CAB32 12 32 - 95,5 50 - 14,4 3 1,5
125** KSCM125R16CAB40 16 40 - 92,0 63 - 16,4 3 2,5
160** KSCM160R18CAB40 18 40 66.7 115,5 63 - 16,4 3 3,7
200** KSCM200R24CAB60 24 60 101.6 165,5 63 - 25,7 3 5,2
250** KSCM250R30CAB60 30 60 101.6 165,5 63 - 25,7 3 7,8
315** KSCM315R36CAB60 36 60 101.6/177.8 260,0 80 - 25,7 3 14,5
FACE MILLING
metric
Spare Parts
D1
Cartridge
Screw
qty.
Adjustment
Screw
qty.
Balance
Coolant
Coolalnt
Screw qty. Screw qty. Cap qty.
Torx-Bit
T x 25 1/4"
63 193.465 8 193.464 8 193.461 8 - - - - 170.279 1
80 193.465 10 193.464 10 193.460 6 470.269 1 - - 170.279 1
100 193.465 12 193.464 12 193.461 8 470.270 1 - - 170.279 1
125 193.465 16 193.464 16 193.462 8 470.271 1 - - 170.279 1
160 193.465 18 193.464 18 193.462 12 - - 470.272 1 170.279 1
200 193.465 24 193.464 24 193.462 12 - - 470.273 1 170.279 1
250 193.465 30 193.464 30 193.463 12 - - 470.274 1 170.279 1
315 193.465 36 193.464 36 193.463 12 - - 470.275 1 170.279 1
qty.
MILLING
END MILLING
Service Level 1
Reconditioning
Service Level 2
PCD insert exchange
SLOTTING / HELICAL
• Tool diameter and tool length change
Reconditioning of PCD cartridges up to three times
• Tool diameter and length remain constant
New Supply
Service Level 2
DIE & MOLD
• On request, the face mill will be delivered
with cartridges already mounted and adjusted.
• Face mill will be delivered with exchange cartridges
already mounted, adjusted, and balanced.
Order example:
1x KSCM125R16CAB40
16 x KSCMCA75UN
KSCM12AA (complete kit assembled and adjusted)
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B39

KSCM Face Mills
NEW
Face Milling Cutter Configuration Options
INSERTS
FACE MILLING
END MILLING
MILLING
SLOTTING / HELICAL
DIE & MOLD
Tool configuration
universal cartridge
Tool configuration universal cartridge
+ finishing cartridge
-KSCMCA75UN
Tool configuration edge cartridge
-KSCMCA90UN
Tool configuration cartridge for
defined surfaces
-KSCMCA75PT
Tool configuration universal cartridge
+ roughing cartridge
-KSCMCA75UN
-KSCMCA75QF
-KSCMCA75UN
Face milling
cutter fitted
entirely with
universal
cartridges
Fitting the face
milling cutter
with universal
and finishing
cartridges
in a ratio of
approx. 3:1
Fitting the face
milling cutter
entirely with
edge cartridges
Fitting the face
milling cutter
entirely with
cartridges for
defined surfaces
Fitting the face
milling cutter
with universal
and roughing
cartridges in a
ratio of approx.
1:1
Depth of cut:
max. 3 mm
Depth of cut:
max. 3 mm
Depth of cut:
max. 3 mm
Depth of cut:
max. 3 mm
Depth of cut:
max. 5 mm
Surface quality:
Rz2 – Rz4
max. 5 max.3
max.3
max.3
max.3
Surface quality:
Rz1,5 – Rz2,5
Surface quality:
Rz2 – Rz4
Surface quality:
Rz3,2 – Rz17
Surface quality:
Rz2 – Rz4
Contouring:
PCD cutting edge length
minimum 5 mm
Contouring:
PCD cutting edge length
minimum 5 mm
Contouring:
PCD cutting edge length
minimum 5 mm
Contouring:
PCD cutting edge length
minimum 5 mm
Contouring:
PCD cutting edge length
minimum 5 mm
max. 5 max. 5 max. 5 max. 5 max. 5
-KSCMCA75HR
B40
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSCM Face Mills
Instruction for Fitting the Cutter Cartridge – Tool Construction
NEW
1 - PCD cutter cartridge
2 - Clamping screw
3 - Adjusting screw
(tapered set screw)
4 - Balancing screw
INSERTS
User information:
• Tools conform to EN ISO 15641.
• Absolute cleanliness must be observed when assembling the face milling cutter.
• An optimum cutting result will only be achieved by adjusting and balancing the complete tool system (face milling cutter + toolholder).
• Balancing is achieved with the aid of the balancing screws. Quality class G2.5 DIN-ISO 1940.
• The balancing screw must not protrude above the body.
• The balancing and adjustment screws have an adhesive coating according to DIN 267, Part 28. If, after repeated use, the coating is no longer adequate
to secure the screws, the screws must be replaced.
• The maximum permitted operating speed (quoted on the tool) must not be exceeded.
• The maximum permitted operating speed is only permitted with clamping systems manufactured by Kennametal in accordance with DIN 69982 Form B
with enlarged plane bearing surface. Reduce the operating speed if clamping systems with increased projection length or made by other manufacturers are
used.
• Tools and fittings are to be serviced and repaired by Kennametal.
• Screws sealed with lacquer have been adjusted by the manufacturer, and must not be moved.
FACE MILLING
Instruction for mounting the face milling cutter on the appropriate toolholder
Mounting the face milling cutter (dimensions similar to DIN 8030 Form B)
Place the body of the face milling cutter on the arbor. Ensure that the contact faces are clean.
Screw in the cutter fastening bolt (RH) and tighten with the appropriate torque.
MILLING
END MILLING
Cutter tightening screw
Face milling cutter body
Cutter arbor
Tightening torque for the central
cutter tightening screw
M20 (adapter diameter 40): 250 Nm
M16 (adapter diameter 32): 150 Nm
M12 (adapter diameter 27): 80 Nm
SLOTTING / HELICAL
Mounting the face milling cutter (dimensions similar to DIN 8030 Form C)
Place the body of the face milling cutter on the arbor. Ensure that the contact faces are clean. Screw in the fastening bolt (RH)
and tighten with the appropriate torque. Put the aluminum coolant cover in place and fasten with the Torx fastening screws.
Fastening screw for
coolant cover
Coolant cover
Fastening screw for
face milling cutter
Face milling
cutter body
Cutter arbor
Tightening torque for the face milling cutter
fastening screws
M20: 250 Nm
M16: 110 Nm
M12: 50 Nm
Tightening torque for the coolant cover
fastening screws
M8: 18 Nm
DIE & MOLD
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B41

KSCM Face Mills
NEW
Cutter Cartridge Assembly
Tool configuration universal cartridge, 75° – face milling
INSERTS
1. Insert cartridges
into the body.
2. Screw in the
clamping screws
(RH), and tighten
to 10 Nm.
3. Screw in the
adjusting screws
(RH), and tighten
to 3 Nm.
4. Determine which
cartridge is in the
highest axial
position.
5. By turning the
adjusting screws to
the right, adjust the
remaining cartridges
for even running.
Max. permitted
run-out error 3 µm.
-KSCMCA75UN
FACE MILLING
Tool configuration universal cartridge + finishing cartridge (ratio approx. 3:1), 75°
END MILLING
MILLING
1. Insert universal
cartridges at a
ratio of approx.
4:1 in the body.
Make sure they
are distributed
evenly!
2. Screw in the
clamping screws
(RH), and tighten
to 10 Nm.
3. Screw in the
adjusting screws
(RH), and tighten
to 3 Nm.
4. Determine
which cartridge
is in the highest
axial position.
5. By turning the
adjusting screws
to the right,
adjust the
remaining
cartridges for
even running.
Max. permitted
run-out error
3 µm.
-KSCMCA75QF
Finishing
cartridge
-KSCMCA75UN
Universal
cartridge
6. Insert finishing
cartridges as
described in steps
1.–5., but with an
axial advance of
0,008 +0,002 mm.
Max permitted
run-out error of
3 µm with finishing
cartridges.
SLOTTING / HELICAL
Tool configuration edge cartridges, 90° – shoulder milling
DIE & MOLD
1. Insert cartridges
into the body.
2. Screw in the
clamping screws
(RH), and
tighten to 10 Nm.
3. Screw in the
adjusting screws
(RH), and
tighten to 3 Nm.
4. Determine which
cartridge is in
the highest axial
position.
5. By turning the
adjusting screws
to the right,
adjust the
remaining
cartridges for
even running.
Max. permitted
run-out error
3 µm.
-KSCMCA90UN
B42
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSCM Face Mills
Cutter Cartridge Assembly
NEW
Tool configuration cartridge for defined surface, 75°
1. Insert cartridges
into the body.
2. Screw in the
clamping screws
(RH), and tighten
to 10 Nm.
3. Screw in the
adjusting screws
(RH), and
tighten to 3 Nm.
4. Determine which
cartridge is in the
highest axial
position.
5. By turning the
adjusting screws
to the right, adjust
the remaining
cartridges for
even running.
Max. permitted
run-out error
3 µm.
-KSCMCA75PT
INSERTS
FACE MILLING
Tool configuration universal cartridge + roughing cartridge (ratio approx. 1:1), 75°
1. Insert universal
cartridges into
every second
seating in the
body.
2. Screw in the
clamping screws
(RH), and tighten
to 10 Nm.
3. Screw in the
adjusting screws
(RH), and tighten
to 3 Nm.
4. Determine
which cartridge
is in the highest
axial position.
5. By turning the
adjusting screws
to the right,
adjust the
remaining
cartridges for
even running.
Max. permitted
run-out error
3 µm.
6. Insert roughing
cartridges into
the remaining
seatings.
7. Screw in the
clamping
screws (RH),
and tighten to
10 Nm.
8. Screw in the
adjusting
screws (RH),
and tighten to
3 Nm.
MILLING
END MILLING
Use cartridges KSCMCA75UN and KSCMCA75HR.
SLOTTING / HELICAL
Note:
The process must be repeated when the cartridges are changed.
To dismantle, remove the adjusting element (Part 3), clamping screw
(Part 2), and cartridge (Part 1).
DIE & MOLD
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B43

NGE-A
Inserts for Indexable End Mills and Shell Mills ADKT10...
Rε
W
INSERTS
BS
LI
5°
S
FACE MILLING
metric
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
mm
LI
inch
mm
W S Rε
inch
mm
inch
Dimensions
mm
inch
mm
BS
inch
First Choice
Alternate Choice
mm
inch
P
Chipload min.
fz min.
mm
inch
KC410M
KC520M
KC522M
KC725M
KC915M
KC935M
ADKT103504PDERLC ADKT16221PDERLC 2 10,00 .394 6,70 .264 3,50 .138 0,40 .016 1,59 .063 - - 0,10 .004
ADKT103504PDFRLC ADKT16221PDFR5LC 2 10,00 .394 6,70 .264 3,50 .138 0,40 .016 1,59 .063 - - 0,10 .004
ADKT103504PDSRLC ADKT16221PDSRLC 2 10,00 .394 6,70 .264 3,50 .138 0,40 .016 1,59 .063 - - 0,10 .004
H
S
N
K
M
ADKT1035PDERLC ADKT1622PDER5LC 2 10,00 .394 6,70 .264 3,50 .138 0,80 .031 1,22 .048 - - 0,10 .004
ADKT1035PDFRLC ADKT1622PDFR5LC 2 10,00 .394 6,70 .264 3,50 .138 0,80 .031 1,22 .048 - - 0,10 .004
ADKT1035PDSRLC ADKT1622PDSR5LC 2 10,00 .394 6,70 .264 3,50 .138 0,80 .031 1,22 .048 - - 0,10 .004
ADKT103516PDERLC ADKT16224PDERLC 2 10,00 .394 6,70 .264 3,50 .138 1,60 .063 1,22 .048 - - 0,10 .004
ADKT103524PDERLC ADKT16226PDERLC 2 10,00 .394 6,70 .264 3,50 .138 2,40 .094 1,22 .048 - - 0,10 .004
ADKT103532PDERLC ADKT16228PDERLC 2 10,00 .394 6,70 .264 3,50 .138 3,20 .125 1,22 .048 - - 0,10 .004
DIE & MOLD
SLOTTING / HELICAL
END MILLING
MILLING
Order example:
1x 12A1R026B16SAD10
10 x ADKT103504PDERLC
B44
To place an order, contact your Kennametal representative or visit www.kennametal.com.

NGE-A
Indexable End Mills and Shell Mills
End Mills
Shell Mills
D6
D
K1
D1
D
AP1
90°
L2
L
D1
90°
AP1
L
INSERTS
metric
End Mills
Weldon Shank
D1
Order
number
ISO
Catalog number
Number
of
Inserts Z D L L2 AP1
12 1024341 12A1R026B16SAD10 1 16 75 26 9 0,1 18600
14 1024342 14A1R026B16SAD10 1 16 75 26 9 0,1 17250
16 1024343 16A2R026B16SAD10 2 16 75 26 9 0,1 16150
18 1024374 18A2R031B20SAD10 2 20 82 31 9 0,1 15200
20 1024375 20A2R031B20SAD10 2 20 82 31 9 0,1 14425
20 1024383 20A3R031B20SAD10 3 20 82 31 9 0,1 14425
22 1024376 22A3R039B25SAD10 3 25 96 39 9 0,1 13750
25 1024377 25A3R039B25SAD10 3 25 96 39 9 0,3 12900
25 1024404 25A4R039B25SAD10 4 25 96 39 9 0,3 12900
28 1024378 28A4R039B25SAD10 4 25 96 39 9 0,3 12200
30 1024379 30A4R043B25SAD10 4 25 100 43 9 0,3 11700
32 1024380 32A4R039B32SAD10 4 32 100 39 9 0,3 11400
32 1024381 32A5R039B32SAD10 5 32 100 39 9 0,5 11400
40 1024382 40A6R049B32SAD10 6 32 110 49 9 0,7 10200
Kg
max.
RPM
FACE MILLING
metric
D1
Shell Mills
Order
number
ISO
Catalog number
Number
of
Inserts Z
D6 D L K1 AP1 Kg
40 1566786 40A04RS90AD10D 4 37 16 40 8,45 9 0,25 10200
40 1566076 40A06RS90AD10D 6 37 16 40 8,45 9 0,25 10200
50 1566075 50A05RS90AD10D 5 45 22 40 10,48 9 0,35 6300
50 1566074 50A07RS90AD10D 7 45 22 40 10,48 9 0,35 6300
63 1566073 63A06RS90AD10D 6 50 22 40 10,48 9 0,60 5100
63 1566072 63A08RS90AD10D 8 50 22 40 10,48 9 0,60 5100
max.
RPM
MILLING
END MILLING
metric
Spare Parts
D1 Screw
Screw
Driver Torx Nm
12-20 MS1861 KT8 8 1,7
25-63 MS1974 KT8 8 1,7
SLOTTING / HELICAL
DIE & MOLD
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B45

NGE-A
Inserts for Indexable End Mills and Shell Mills ADKT10...
Rε
W
INSERTS
BS
LI
5°
S
FACE MILLING
inch
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
mm
LI
inch
mm
W S Rε
inch
mm
inch
Dimensions
mm
inch
mm
BS
inch
First Choice
Alternate Choice
mm
inch
P
Chipload min.
fz min.
mm
inch
KC410M
KC520M
KC522M
KC725M
KC915M
KC935M
ADKT103504PDERLC ADKT16221PDERLC 2 10,00 .394 6,70 .264 3,50 .138 0,40 .016 1,59 .063 - - 0,10 .004
ADKT103504PDFRLC ADKT16221PDFR5LC 2 10,00 .394 6,70 .264 3,50 .138 0,40 .016 1,59 .063 - - 0,10 .004
ADKT103504PDSRLC ADKT16221PDSRLC 2 10,00 .394 6,70 .264 3,50 .138 0,40 .016 1,59 .063 - - 0,10 .004
H
S
N
K
M
ADKT1035PDERLC ADKT1622PDER5LC 2 10,00 .394 6,70 .264 3,50 .138 0,80 .031 1,22 .048 - - 0,10 .004
ADKT1035PDFRLC ADKT1622PDFR5LC 2 10,00 .394 6,70 .264 3,50 .138 0,80 .031 1,22 .048 - - 0,10 .004
ADKT1035PDSRLC ADKT1622PDSR5LC 2 10,00 .394 6,70 .264 3,50 .138 0,80 .031 1,22 .048 - - 0,10 .004
ADKT103516PDERLC ADKT16224PDERLC 2 10,00 .394 6,70 .264 3,50 .138 1,60 .063 1,22 .048 - - 0,10 .004
ADKT103524PDERLC ADKT16226PDERLC 2 10,00 .394 6,70 .264 3,50 .138 2,40 .094 1,22 .048 - - 0,10 .004
ADKT103532PDERLC ADKT16228PDERLC 2 10,00 .394 6,70 .264 3,50 .138 3,20 .125 1,22 .048 - - 0,10 .004
DIE & MOLD
SLOTTING / HELICAL
END MILLING
MILLING
Order example:
1x KIEX50R075AD160M3
10 x ADKT16221PDERLC
B46
To place an order, contact your Kennametal representative or visit www.kennametal.com.

NGE-A
Indexable End Mills and Shell Mills
End Mills Shell Mills
D6
End Mills with Steep Taper
D
K1
D1
D
AP1
90°
L2
L
D1
90°
AP1
L
D1
90°
AP1
L2
L1
CV40
BT40
INSERTS
inch
End Mills
D1
Order
number
ANSI
Catalog number
Number
of
Inserts Z D L L2
.75 2429380 KIEX50R075AD160M3 2 .75 5.00 1.75 .357 3° .50 14800
.75 2429373 KIEX50R075AD160F3 3 .75 5.00 1.75 .357 3° .50 14800
.75 2494463 KISR075AD160F3R 3 .75 3.38 1.25 .357 3° .30 14800
1.00 2494465 KISR100AD160F4R 4 1.00 3.78 1.50 .357 3° .70 12800
1.00 1534287 K1002R107AD162204 2 1.00 7.85 1.72 .357 3° 1.60 12000
1.25 2494467 KISR125AD160F5R 5 1.25 4.00 1.50 .357 2° 1.20 11400
1.25 1604748 K1253R375AD162205 3 1.25 6.28 3.75 .357 2° 1.60 11400
1.50 2500672 KISR150AD160F5R 6 1.25 4.00 1.50 .357 2° 1.30 10400
AP1
Ramp
Angle
lbs.
max.
RPM
FACE MILLING
inch
Double-ended End Mills
D1
Order
number
ANSI
Catalog number
Number
of
Inserts Z D L L2
.50 238959 KISR050AD1603DE* 1 .75 3.03 1.00 .357 N/A .32 18100
.63 238960 KISR062AD1603DE* 2 .75 3.03 1.00 .357 4° .35 16200
.63 238961 KISR062075AD1603F3DE* 2 & 3 .75 3.03 & 3.28 1.00 & 1.25 .357 4° .39 14800
.75 238962 KISR075AD160F4DE* 3 1.00 3.53 1.25 .357 3° .69 14800
1.00 238973 KISR100AD16F4DE* 4 1.00 3.78 1.50 .357 3° .87 12800
* No through coolant
Ramp
Angle
lbs.
max.
RPM
MILLING
END MILLING
inch
End Mills with Steep Taper CV40
D1
Order
number
ANSI
Catalog number
Number
of
Inserts Z
System
Size L L1 L2
1.00 2383975 KISR10040CVAD160F 4 CV40 5.687 3.00 2.13 .357 3° 2.1 12800
1.25 2245396 KISR12540CVAD160M 4 CV40 5.687 3.00 2.13 .357 2° 2.4 11400
1.25 2248088 KISR12540CVAD160F 5 CV40 5.687 3.00 2.13 .357 2° 2.4 11400
1.50 2245397 KISR15040CVAD160F 6 CV40 5.687 3.00 2.13 .357 2° 2.7 10400
Ramp
Angle
lbs.
max.
RPM
SLOTTING / HELICAL
inch
Shell Mills
D1
Order
number
ANSI
Catalog number
Number
of
Inserts Z
D6 D
L K1 AP1 lbs.
max.
RPM
Mounting
Screw
1.50 2414961 KSSR150AD1620M3 4 1.375 .75 1.575 .312 .357 .5 10400 S-445
1.50 2414962 KSSR150AD1620F3 6 1.375 .75 1.575 .312 .357 .4 10400 S-445
2.00 2415003 KSSR200AD1620M3 5 1.750 .75 1.575 .312 .357 .9 9000 S-445
2.00 2415004 KSSR200AD1620F3 7 1.750 .75 1.575 .312 .357 .9 9000 S-445
2.50 2415005 KSSR250AD1620M3 6 1.750 .75 1.575 .312 .357 1.3 8050 S-445
2.50 2415006 KSSR250AD1620F3 8 1.750 .75 1.575 .312 .357 1.3 8050 S-445
3.00 2415007 KSSR300AD1620M4 7 2.190 1.00 1.969 .375 .357 2.3 7340 S-458
3.00 2415008 KSSR300AD1620F4 10 2.190 1.00 1.969 .375 .357 2.2 7340 S-458
DIE & MOLD
inch
Spare Parts
D1 Screw
Screw
Driver Torx in.-lbs.
.75 - 3.00 MS1861 DT8 8 17
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B47

NGE-A
Application Data
END MILLING
FACE MILLING
INSERTS
MILLING
Cutting speed (Vc) – feet/min
Cutting speed (Vc) – feet/min
m/min
ft/min
360 1200
320 1050
270
230
180
140
90
50
m/min
900
750
600
450
300
150
ft/min
330 1100
300 1000
270 900
240 800
210 700
180 600
150 500
120 400
90 300
60 200
30 100
0 0
0 .001 .002 .003
0,03 0,05 0,08
0 .001 .002
0,03 0,05
KC725M E
Steel Milling Grades
.004
0,10
KC935M E
.005
0,13
.006
0,15
.007
0,18
Chipload (fz) – ipt
Stainless Steel Milling Grades
.003
0,08
.004
0,10
KC
935M E
KC
522M E
KC725M E
.005
0,13
.006
0,15
Chipload (fz) – ipt
KC725M S
.007
0,18
.008
0,20
.008
0,20
KC935M S
.009
0,23
.009
0,23
.010
0,25
.010
0,25
inch
mm
inch
mm
Coolant
Coolant
KC725M
▼ S
▼▼
KC725M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
KC935M
▼▼ E
▼▼▼
KC725M
▼▼E
▼▼▼
KC522M
▼▼ E
▼▼▼
KC935M
▼▼▼E
▼▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
650
200
750
230
750
230
1000
300
chipload
Fz
350HB or High
Alloy content
(15-5, 17-4
Stainless, P20)
Dry preferred Wet, reduce speed by 25%
speed
Vc
Starting ft/min
operating
conditions m/min
500
150
650
200
800
240
chipload
Fz
Austenitic
(304, 316)
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.006 400 .005 350 .004
0,15 120 0,15 110 0,10
.006
0,15
.005
0,15
Dry preferred
550
170
700
210
.005
0,15
.004
0,10
Ferritic /
Martensitic
135-330 HB
400
120
.004
0,10
not
recommended
Ferritic /
Martensitic
330-450 HB
Wet, reduce speed
by 25%
SLOTTING / HELICAL
DIE & MOLD
m/min ft/min
300 1000
270
240
210
180
150
120
90
60
30
900
800
700
600
500
400
300
200
100
0 .002
0,05
.004
0,10
Cutting speed (Vc) – feet/min
Cast Iron Milling Grades
KC915M E
KC520M E
.006
0,15
KC522M E
.008
0,20
.010
0,25
.012
0,30
inch
mm
Coolant
KC522M
▼▼E
▼▼▼
KC520M
▼▼ E
▼▼▼
KC915M
▼▼▼ E
▼▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
chipload
Fz
400
120
.008
0,20
600 .006
180 0,15
900
270
.005
0,15

NGE-A
Application Data
Cutting speed (Vc) – feet/min
m/min ft/min
3000 9000
2667 8000
2333 7000
2000 6000
1667 5000
1333 4000
1000 3000
667 2000
333 1000
Non-Ferrous Milling Grades
KC410M F
KC522M E
Coolant
KC522M
▼▼ E
▼▼▼
KC410M
▼▼ F
▼▼▼
speed
Vc
chipload
Fz
Free Machining
9%Si
(390,380)
speed
Vc
Copper,
Zinc,
Brass
chipload
Fz
speed
Vc
chipload
Fz
Starting ft/min inch ft/min inch ft/min inch ft/min inch
operating
conditions m/min mm m/min mm m/min mm m/min mm
1100
330
1750
530
.010
0,25
.009
0,25
1000
300
1500
450
.010
0,25
.009
0,25
900
270
1100
330
.008
0,20
.008
0,20
1250
380
1750
530
.010
0,25
.010
0,25
Non-Metallics
INSERTS
0
0
0 .002
0,05
.004
0,10
.006
0,15
.008
0,20
.010
0,25
.012
0,30
.014
0,35
.016 inch
0,40 mm
Dry not recommended
Wet preferred
Chipload (fz) – ipt
Cutting speed (Vc) – feet/min
m/min
80
70
70
60
50
50
40
40
30
20
20
10
ft/min
260
240
220
200
180
160
140
120
100
80
60
40
High-Temperature Alloys Milling Grades
0 .001 .002
0,03 0,05
.003
0,08
.004
0,10
KC
522M E
KC725M E
.005
0,13
.006
0,15
.007
0,18
Chipload (fz) – ipt
.008
0,20
.009
0,23
.010
0,25
inch
mm
Coolant
KC725M
▼▼ E
▼▼▼
KC522M
▼▼ E
▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
110
30
160
50
chipload
Fz
Titanium
(Ti 6 Al 4 V)
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.005 100 .005 180 .005
0,15 30 0,15 50 0,15
.004
0,10
145
40
Dry not recommended
.005
0,15
240
70
.005
0,15
Nickel, Cobalt
Alloys (Inconel, Iron Alloys
Hastelloy, (X12NiCrSi3616,
Monel, X2NiCrAlTi3220)
Nimonic)
Wet preferred
FACE MILLING
MILLING
END MILLING
DIE & MOLD
SLOTTING / HELICAL
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B49

Mill 1
NEW
Indexable Inserts for Mill 1-14
INSERTS
W
Rε
LI
BS
15°
S
FACE MILLING
metric
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
mm
LI
inch
mm
W S Rε
BS
inch
mm
inch
H
Dimensions S
N
First Choice
Alternate Choice
K
M
mm
inch
mm
inch
mm
inch
P
Chipload min.
fz min.
mm
inch
KC410M
KC520M
KC522M
KC725M
KC915M
KC935M
EDCT140404PDERLD EC1404ELD 2 17,48 .688 8,46 .333 4,5 .177 0,4 .015 2,95 .116 - - 0,08 .003
EDCT140404PDERGD EC1404EGD 2 17,48 .688 8,46 .333 4,5 .177 0,4 .015 2,95 .116 - - 0,10 .004
EDCT140404PDFRLDJ EC1404FLDJ 2 17,48 .688 8,46 .333 4,5 .177 0,4 .015 2,95 .116 - - 0,07 .003
EDCT140408PDERLD EC1408ELD 2 17,48 .688 8,46 .333 4,5 .177 0,8 .032 2,56 .101 - - 0,08 .003
EDCT140408PDERGD EC1408EGD 2 17,48 .688 8,46 .333 4,5 .177 0,8 .032 2,56 .101 - - 0,10 .004
EDCT140408PDFRLDJ EC1408FLDJ 2 17,48 .688 8,46 .333 4,5 .177 0,8 .032 2,56 .101 - - 0,07 .003
EDCT140412PDERLD EC1412ELD 2 17,48 .688 8,46 .333 4,5 .177 1,2 .047 2,17 .085 - - 0,08 .003
EDCT140412PDERGD EC1412EGD 2 17,48 .688 8,46 .333 4,5 .177 1,2 .047 2,17 .085 - - 0,10 .004
EDCT140412PDFRLDJ EC1412FLDJ 2 17,48 .688 8,46 .333 4,5 .177 1,2 .047 2,17 .085 - - 0,07 .003
EDCT140416PDERLD EC1416ELD 2 17,48 .688 8,46 .333 4,5 .177 1,6 .063 1,77 .070 - - 0,08 .003
EDCT140416PDERGD EC1416EGD 2 17,48 .688 8,46 .333 4,5 .177 1,6 .063 1,77 .070 - - 0,10 .004
EDCT140416PDFRLDJ EC1416FLDJ 2 17,48 .688 8,46 .333 4,5 .177 1,6 .063 1,77 .070 - - 0,07 .003
EDCT140431PDERLD EC1431ELD 2 17,48 .688 8,46 .333 4,5 .177 3,1 .122 0,26 .010 - - 0,08 .003
EDCT140431PDERGD EC1431EGD 2 17,48 .688 8,46 .333 4,5 .177 3,1 .122 0,26 .010 - - 0,10 .004
EDCT140431PDFRLDJ EC1431FLDJ 2 17,48 .688 8,46 .333 4,5 .177 3,1 .122 0,26 .010 - - 0,07 .003
EDPT140408PDSRGD EP1408SGD 2 17,48 .688 8,46 .333 4,5 .177 0,8 .032 2,56 .101 - - 0,15 .006
EDPT140412PDSRGD EP1412SGD 2 17,48 .688 8,46 .333 4,5 .177 1,2 .047 2,17 .085 - - 0,15 .006
EDPT140416PDSRGD EP1416SGD 2 17,48 .688 8,46 .333 4,5 .177 1,6 .063 1,77 .070 - - 0,15 .006
DIE & MOLD
SLOTTING / HELICAL
END MILLING
MILLING
NOTE: Inserts and milling cutters available Jan. 2006.
Order example:
1x 20A02R050A20SED14
10 x EDCT140404PDERLD
B50
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Indexable End Mills and Shell Mills – Mill 1-14
Mill 1
NEW
End Mills End Mills D6
Shell Mills
D
K1
D1
D
D1
D
L
90°
AP1
L2
L
90°
AP1
L2
L
D1
AP1
90°
INSERTS
metric
D1
Order
number
End Mills
ISO
Catalog number
Cylindrical
Shank
Number
of
Inserts Z D L
L2
20 – 20A02R050A20SED14-170 2 20 170 50 14 16° 0,3 47500
25 – 25A02R050A25SED14-170 2 25 170 50 14 10° 0,5 39700
25 – 25A03R050A25SED14-170 3 25 170 50 14 10° 0,5 39700
32 – 32A03R050A32SED14-200 3 32 200 50 14 7° 1,1 33300
32 – 32A04R050A32SED14-200 4 32 200 50 14 7° 1,1 33300
40 – 40A04R050A32SED14-200 4 32 200 50 14 5° 1,2 28700
40 – 40A05R050A32SED14-200 5 32 200 50 14 5° 1,2 28700
metric
D1
D1
Order
number
Order
number
ISO
Catalog number
Shell Mills
ISO
Catalog number
Weldon
Shank
Number
of
Inserts Z D L
L2
20 2622232 20A02R039B20SED14 2 20 90 39 14 16° 0,2 47500
25 2623937 25A02R044B25SED14 2 25 100 44 14 10° 0,3 39700
25 2478640 25A03R044B25SED14 3 25 100 44 14 10° 0,3 39700
32 2623938 32A03R050B32SED14 3 32 110 50 14 7° 0,6 33300
32 2478642 32A04R050B32SED14 4 32 110 50 14 7° 0,6 33300
40 2623939 40A04R050B32SED14 4 32 110 50 14 5° 0,7 28700
40 2623933 40A05R050B32SED14 5 32 110 50 14 5° 0,7 28700
metric
End Mills
AP1
Number
of
Inserts Z D D6 L K1 AP1
40 2623940 40A04RS90ED14D 4 16 37 40 8,45 14 5° 0,2 28700
40 2623934 40A05RS90ED14D 5 16 37 40 8,45 14 5° 0,2 28700
50 2623941 50A05RS90ED14D 5 22 45 40 10,48 14 3° 0,3 25000
50 2478686 50A06RS90ED14D 6 22 45 40 10,48 14 3° 0,3 25000
63 2623942 63A06RS90ED14D 6 22 50 40 10,48 14 2° 0,6 21800
63 2478689 63A07RS90ED14D 7 22 50 40 10,48 14 2° 0,5 21800
80 2623963 80A07RS90ED14D 7 27 60 50 12,48 14 2° 1,1 19000
80 2478690 80A09RS90ED14D 9 27 60 50 12,48 14 2° 1,1 19000
100 2623964 100A08RS90ED14D 8 32 80 50 14,48 14 1° 1,9 16800
100 2623935 100A10RS90ED14D 10 32 80 50 14,48 14 1° 1,9 16000
125 2510390 125B09RS90ED14D 9 40 90 63 16,48 14 1° 3,2 14900
125 2623936 125B12RS90ED14D 12 40 90 63 16,48 14 1° 3,2 14900
160 2623965 160C11RS90ED14D 11 40 100 63 16,48 14 1° 4,4 13100
160 2510391 160C15RS90ED14D 15 40 100 63 16,48 14 1° 4,4 13100
AP1
max.
Ramp
Angle
max.
Ramp
Angle
max.
Ramp
Angle
Kg
Kg
Kg
max.
RPM
max.
RPM
max.
RPM
MILLING
SLOTTING / HELICAL
END MILLING
FACE MILLING
metric and inch
Spare Parts
End Mills
D1
Insert
Screw
Torx Plus
Wrench
Ø 20 (.62, .75, .88) MS2167 DT9IP 2,3
25-40 (.97, 1.0, 1.25, 1.50) MS2166 DT9IP 2,3
Nm
DIE & MOLD
Shell Mills
D1
Mounting
Screw
Coolant
Cap
Insert
Screw
Torx Plus
Wrench
Ø 40 MS1294CG - MS2166 DT9IP 2,3
Ø 50, Ø 63 MS2072CG - MS2166 DT9IP 2,3
Ø 80 MS2038CG - MS2166 DT9IP 2,3
Ø 100 MS1254CG - MS2166 DT9IP 2,3
Ø 125 420.200 470.232 MS2166 DT9IP 2,3
Ø 160 420.200 470.233 MS2166 DT9IP 2,3
Nm
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B51

Mill 1
NEW
Indexable Inserts for Mill 1-14
INSERTS
W
Rε
LI
BS
15°
S
FACE MILLING
END MILLING
MILLING
inch
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
mm
LI
inch
mm
W S Rε
BS
inch
mm
inch
H
Dimensions S
N
First Choice
Alternate Choice
K
M
mm
inch
mm
inch
mm
inch
P
Chipload min.
fz min.
mm
inch
KC410M
KC520M
KC522M
KC725M
KC915M
KC935M
EDCT140404PDERLD EC1404ELD 2 17,48 .688 8,46 .333 4,5 .177 0,4 .015 2,95 .116 - - 0,08 .003
EDCT140404PDERGD EC1404EGD 2 17,48 .688 8,46 .333 4,5 .177 0,4 .015 2,95 .116 - - 0,10 .004
EDCT140404PDFRLDJ EC1404FLDJ 2 17,48 .688 8,46 .333 4,5 .177 0,4 .015 2,95 .116 - - 0,07 .003
EDCT140408PDERLD EC1408ELD 2 17,48 .688 8,46 .333 4,5 .177 0,8 .032 2,56 .101 - - 0,08 .003
EDCT140408PDERGD EC1408EGD 2 17,48 .688 8,46 .333 4,5 .177 0,8 .032 2,56 .101 - - 0,10 .004
EDCT140408PDFRLDJ EC1408FLDJ 2 17,48 .688 8,46 .333 4,5 .177 0,8 .032 2,56 .101 - - 0,07 .003
EDCT140412PDERLD EC1412ELD 2 17,48 .688 8,46 .333 4,5 .177 1,2 .047 2,17 .085 - - 0,08 .003
EDCT140412PDERGD EC1412EGD 2 17,48 .688 8,46 .333 4,5 .177 1,2 .047 2,17 .085 - - 0,10 .004
EDCT140412PDFRLDJ EC1412FLDJ 2 17,48 .688 8,46 .333 4,5 .177 1,2 .047 2,17 .085 - - 0,07 .003
EDCT140416PDERLD EC1416ELD 2 17,48 .688 8,46 .333 4,5 .177 1,6 .063 1,77 .070 - - 0,08 .003
EDCT140416PDERGD EC1416EGD 2 17,48 .688 8,46 .333 4,5 .177 1,6 .063 1,77 .070 - - 0,10 .004
EDCT140416PDFRLDJ EC1416FLDJ 2 17,48 .688 8,46 .333 4,5 .177 1,6 .063 1,77 .070 - - 0,07 .003
EDCT140431PDERLD EC1431ELD 2 17,48 .688 8,46 .333 4,5 .177 3,1 .122 0,26 .010 - - 0,08 .003
EDCT140431PDERGD EC1431EGD 2 17,48 .688 8,46 .333 4,5 .177 3,1 .122 0,26 .010 - - 0,10 .004
EDCT140431PDFRLDJ EC1431FLDJ 2 17,48 .688 8,46 .333 4,5 .177 3,1 .122 0,26 .010 - - 0,07 .003
EDPT140408PDSRGD EP1408SGD 2 17,48 .688 8,46 .333 4,5 .177 0,8 .032 2,56 .101 - - 0,15 .006
EDPT140412PDSRGD EP1412SGD 2 17,48 .688 8,46 .333 4,5 .177 1,2 .047 2,17 .085 - - 0,15 .006
EDPT140416PDSRGD EP1416SGD 2 17,48 .688 8,46 .333 4,5 .177 1,6 .063 1,77 .070 - - 0,15 .006
DIE & MOLD
SLOTTING / HELICAL
NOTE: Inserts and milling cutters available Jan. 2006.
Order example:
1x M1D062E1401W075L150
10 x EDCT140404PDERLD
B52
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Indexable End Mills and Shell Mills – Mill 1-14
Mill 1
NEW
End Mills End Mills D6
Shell Mills
D
K1
D1
D
D1
D
L
90°
AP1
L2
L
90°
AP1
L2
L
D1
AP1
90°
INSERTS
inch
D1
inch
D1
Order
number
Order
number
End Mills
ANSI
Catalog number
End Mills
ANSI
Catalog number
Cylindrical
Shank
Number
of
Inserts Z D L
L2
.75 2624187 M1D075E1402C075L650 2 .75 6.5 1.75 .551 18° .7 49600
.75 2624197 M1D075E1402C075L800 2 .75 8.0 1.75 .551 18° .8 49600
1.00 2624198 M1D100E1402C100L1000 2 1.00 10.0 1.75 .551 10° 2.0 39200
1.00 2624190 M1D100E1403C100L750 3 1.00 7.5 1.75 .551 10° 1.4 39200
1.25 2624200 M1D125E1403C125L1000 3 1.25 10.0 2.25 .551 7° 3.1 33400
1.25 2624192 M1D125E1404C125L800 4 1.25 8.0 2.25 .551 7° 2.4 33400
1.50 2624202 M1D150E1404C125L1000 4 1.25 10.0 2.25 .551 5° 3.4 29600
1.50 2624250 M1D150E1405C125L800 5 1.25 8.0 2.25 .551 5° 2.7 29600
Weldon
Shank
Number
of
Inserts Z D L
L2
.62 2624243 M1D062E1401W075L150 1 .75 3.78 1.50 .551 - .3 8000
.75 2623856 M1D075E1402W075L175 2 .75 3.78 1.75 .551 18° .4 49600
.88 2624245 M1D088E1402W100L175 2 1.00 4.03 1.75 .551 18° .6 43500
.97 2624189 M1D097E1403W100L175 3 1.00 4.03 1.75 .551 11° .7 40100
1.00 2623857 M1D100E1402W100L175 2 1.00 4.03 1.75 .551 10° .7 39200
1.00 2479507 M1D100E1403W075L175 3 .75 3.78 1.75 .551 10° .5 39200
1.00 2479508 M1D100E1403W100L175 3 1.00 4.03 1.75 .551 10° .7 39200
1.00 2624199 M1D100E1403W100L175R 3 1.00 4.03 1.75 .551 10° .7 39200
1.25 2623858 M1D125E1403W100L225 3 1.00 4.53 2.25 .551 7° 1.0 33400
1.25 2479512 M1D125E1404W100L225 4 1.00 4.53 2.25 .551 7° 1.0 33400
1.25 2479506 M1D125E1404W125L225 4 1.25 4.53 2.25 .551 7° 1.3 33400
1.25 2624201 M1D125E1404W125L225R 4 1.25 4.53 2.25 .551 7° 1.3 33400
1.50 2624194 M1D150E1404W125L225 4 1.25 4.53 2.25 .551 5° 1.6 29600
1.50 2623859 M1D150E1405W125L225 5 1.25 4.53 2.25 .551 5° 1.5 29600
1.50 2624271 M1D150E1405W125L225R 5 1.25 4.53 2.25 .551 5° 1.5 29600
inch
D1
Order
number
ANSI
Catalog number
Weldon
Shank
Number
of
Inserts Z D L
L2
.75 2624188 M1D075E1402W075L175DE 2 .75 3.78 1.75 .551 18° .5 49600
1.00 2624247 M1D100E1402W100L175-DE 2 1.00 4.03 1.75 .551 10° 1.0 39200
1.00 2624191 M1D100E1403W100L175DE 3 1.00 4.03 1.75 .551 10° 1.0 39200
1.25 2624249 M1D125E1403W125L225-DE 3 1.25 4.53 2.25 .551 7° 1.9 33400
1.25 2624193 M1D125E1404W125L225DE 4 1.25 4.53 2.25 .551 7° 1.8 33400
inch
D1
Order
number
End Mills – Double Ended
End Mills with
Steep Taper CV40
ANSI
Catalog number
Number
of
Inserts Z
System
Size
1.00 2624246 M1D100E1403CV40L300 3 CV40 5.687 3.000 .551 10° 2.0 39200
1.25 2624248 M1D125E1404CV40L300 4 CV40 5.687 3.000 .551 7° 2.2 33400
1.50 2624253 M1D150E1405CV40L300 5 CV40 5.560 2.875 .551 5° 2.5 29600
L
L1
AP1
AP1
AP1
AP1
max.
Ramp
Angle
max.
Ramp
Angle
max.
Ramp
Angle
max.
Ramp
Angle
lbs.
lbs.
lbs.
lbs.
max.
RPM
max.
RPM
max.
RPM
max.
RPM
MILLING
DIE & MOLD
SLOTTING / HELICAL
END MILLING
FACE MILLING
inch
Shell Mills
D1
Order
number
ANSI
Catalog number
Number
of
Inserts Z D D6 L K1
1.25 2479509 M1D125E1404S075L157 4 .75 1.204 1.57 .250 .551 7° .3 33400
1.50 2624255 M1D150E1405S075L157 5 .75 1.414 1.57 .312 .551 5° .4 29600
2.00 2624270 M1D200E1405S075L157 5 .75 1.750 1.57 .312 .551 3° .8 24700
2.00 2479510 M1D200E1406S075L157 6 .75 1.750 1.57 .312 .551 3° .8 24700
2.50 2624274 M1D250E1405S075L157 5 .75 1.750 1.57 .312 .551 2° 1.2 21700
2.50 2624254 M1D250E1407S075L157 7 .75 1.750 1.57 .312 .551 2° 1.2 21700
3.00 2624277 M1D300E1406S100L175 6 1.00 2.188 1.75 .375 .551 2° 2.1 19600
3.00 2624275 M1D300E1408S100L175 8 1.00 2.188 1.75 .375 .551 2° 2.0 19600
4.00 2624279 M1D400E1408S150L200 8 1.50 3.625 2.00 .625 .551 1° 3.9 16700
To place an order, contact your Kennametal representative or visit www.kennametal.com.
AP1
max.
Ramp
Angle
lbs.
max.
RPM
B53

Mill 1-14
Application Data
INSERTS
m/min ft/min
240 800
230 750
210 700
200 650
180 600
170 550
150 500
140 450
120 400
110 350
90 300
80 250
Cutting speed (Vc) – feet/min
0
.002
0,05
Steel Milling Grades
.004
0,10
.006
0,15
KC725M E
KC935M S
KC725M S
.008
0,20
.010
0,25
Chipload (fz) – ipt
.012
0,30
.014
0,36
inch
mm
Coolant
KC725M
▼ S
▼▼
KC725M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
650
200
750
230
750
230
chipload
Fz
350HB or High
Alloy content
(15-5, 17-4
Stainless, P20)
Dry preferred Wet, reduce speed by 25%
DIE & MOLD
SLOTTING / HELICAL
END MILLING
FACE MILLING
MILLING
Cutting speed (Vc) – feet/min
Cutting speed (Vc) – feet/min
m/min
240
210
180
150
120
90
60
30
0
m/min
240
230
210
200
180
170
150
140
120
ft/min
800
700
600
500
400
300
200
100
0
ft/min
800
750
700
650
600
550
500
450
400
0 .002 .004
0,05 0,10
Stainless Steel Milling Grades
KC522M E
Cast Iron Milling Grades
.006
0,15
KC725M E
0 .01 .002 .003 .004 .005 .006 .007 .008 .009 .010 .011
0,05 0,05 0,08 0,10 0,13 0,15 0,18 0,20 0,23 0,25 0,28
Chipload (fz) – ipt
.008
0,20
KC520M S
KC935M S
.010
0,25
Chipload (fz) – ipt
.012
0,30
.014
0,36
inch
mm
inch
mm
Coolant
Coolant
KC725M
▼▼E
▼▼▼
KC522M
▼▼ E
▼▼▼
KC520M
▼▼ S
▼▼▼
KC935M
▼▼▼ S
▼▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
500
150
700
210
speed
Vc
chipload
Fz
Austenitic
(304, 316)
Starting ft/min
operating
conditions m/min
chipload
Fz
600 .007
180 0,18
600
180
.008
0,20

Mill 1-14
Application Data
Cutting speed (Vc) – feet/min
m/min ft/min
3000 9000
2400 8000
2100 7000
1800 6000
1500 5000
1200 4000
900 3000
600 2000
300 1000
0 0
Non-Ferrous Milling Grades
KC410M F
KC522M E
Coolant
Starting
operating
conditions
KC522M
▼ E
▼▼
KC410M
▼▼ F
▼▼▼
speed
Vc
ft/min
m/min
1000
300
1770
530
chipload
Fz
Free Machining
9%Si
(390,380)
speed
Vc
chipload
Fz
not
recommended
Copper,
Zinc,
Brass
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch ft/min inch
mm m/min mm m/min mm m/min mm
.015
0,40
.010
0,25
1500
450
Dry not recommended
.010
0,25
1100
330
.010
0,25
not
recommended
1770
530
Wet preferred
.010
0,25
Non-Metallics
INSERTS
0 .002
0,05
.004
0,10
.006
0,15
.008
0,20
.010
0,25
.012
0,30
.014
0,36
.016
0,41
.018
0,46
.020 inch
0,51 mm
Chipload (fz) – ipt
Cutting speed (Vc) – feet/min
m/min ft/min
80 260
70 240
70 220
60 200
50 180
50 160
40 140
40 120
30 100
20 80
20 60
10 40
shoulder cut
High-Temperature Alloys Milling Grades
0 .001 .002
0,03 0,05
.003
0,08
.004
0,10
KC522M E
.005
0,13
KC725M E
.006
0,15
Chipload (fz) – ipt
.007
0,18
.008
0,20
.009
0,23
ramp angle
DH min. = Min. blind hole diameter with helical interpolation
DHI max. = Max. blind hole diameter with flat bottom
.010
0,25
inch
mm
ramping
Coolant
KC725M
▼▼E
▼▼▼
KC522M
▼▼ E
▼▼▼
helical
interpolation
Ø DH/DHI
speed
Vc
Starting ft/min
operating
conditions m/min
100
30
130
40
chipload
Fz
Titanium
(Ti 6 Al 4 V)
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.005 100 .005 170 .005
0,15 30 0,15 50 0,15
.005
0,15
120
40
Dry not recommended
.005
0,15
200
60
.005
0,15
Nickel, Cobalt
Alloys (Inconel, Iron Alloys
Hastelloy, (X12NiCrSi3616,
Monel, X2NiCrAlTi3220)
Nimonic)
Cutting
dia.
[mm]
Wet preferred
Ramp
Angle
max. [°]
Ø
DH min.
[mm]
Ø
DHI max.
[mm]
20 16° 25 36
25 10° 30 46
32 7° 44 60
40 5° 60 76
50 3° 80 96
63 2° 105 122
80 2° 140 157
100 1° 180 197
125 1° 230 247
160 1° 300 317
MILLING
DIE & MOLD
SLOTTING / HELICAL
END MILLING
FACE MILLING
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B55

Mill 1
NEW
Indexable Inserts for Mill 1-18
LD/GD
BS
W
INSERTS
Rε
L1
15°
S
FACE MILLING
END MILLING
MILLING
metric
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
mm
LI
inch
mm
W S Rε
BS
inch
mm
inch
Dimensions
mm
inch
mm
inch
First Choice
Alternate Choice
mm
inch
P
Chipload min.
fz min.
mm
inch
KC410M
KC520M
KC522M
KC725M
KC915M
KC935M
EDCT180504PDERGD EC1804E 2 21,76 .857 10,97 .432 5,5 .22 0,4 .015 3,07 .121 - - 0,10 .004
EDCT180504PDFRLDJ EC1804FJ 2 21,76 .857 10,97 .432 5,5 .22 0,4 .015 3,07 .121 - - 0,07 .003
EDCT180508PDERGD EC1808E 2 21,76 .857 10,97 .432 5,5 .22 0,8 .032 2,69 .106 - - 0,10 .004
EDCT180508PDERLD EC1808E2 2 21,76 .857 10,97 .432 5,5 .22 0,8 .032 2,69 .106 - - 0,08 .003
EDCT180508PDFRLDJ EC1808FJ 2 21,76 .857 10,97 .432 5,5 .22 0,8 .032 2,69 .106 - - 0,07 .003
EDCT180512PDERGD EC1812E 2 21,76 .857 10,97 .432 5,5 .22 1,2 .047 2,29 .090 - - 0,10 .004
EDCT180512PDFRLDJ EC1812FJ 2 21,76 .857 10,97 .432 5,5 .22 1,2 .047 2,29 .090 - - 0,07 .003
EDCT180516PDERLD EC1816E 2 21,76 .857 10,97 .432 5,5 .22 1,6 .063 1,90 .075 - - 0,08 .003
EDCT180516PDFRLDJ EC1816FJ 2 21,76 .857 10,97 .432 5,5 .22 1,6 .063 1,90 .075 - - 0,07 .003
EDCT180520PDFRLDJ EC1820FJ 2 21,76 .857 10,97 .432 5,5 .22 2,0 .078 1,49 .059 - - 0,07 .003
EDCT180524PDFRLDJ EC1824FJ 2 21,76 .857 10,97 .432 5,5 .22 2,4 .093 1,11 .044 - - 0,07 .003
EDCT180532PDERLD EC1832E 2 21,76 .857 10,97 .432 5,5 .22 3,2 .125 0,32 .013 - - 0,08 .003
EDCT180532PDFRLDJ EC1832FJ 2 21,76 .857 10,97 .432 5,5 .22 3,2 .125 0,32 .013 - - 0,07 .003
EDCT180540PDERLD EC1840E 2 21,76 .857 10,97 .432 5,5 .22 4,0 .156 - - - - 0,08 .003
EDCT180540PDFRLDJ EC1840FJ 2 21,76 .857 10,97 .432 5,5 .22 4,0 .156 - - - - 0,07 .003
EDCT180548PDERLD EC1848E* 2 21,76 .857 10,97 .432 5,5 .22 4,8 .187 - - - - 0,08 .003
EDCT180548PDFRLDJ EC1848FJ* 2 21,76 .857 10,97 .432 5,5 .22 4,8 .187 - - - - 0,07 .003
EDCT180564PDERLD EC1864E* 2 21,76 .857 10,97 .432 5,5 .22 6,4 .250 - - - - 0,08 .003
EDCT180564PDFRLDJ EC1864FJ* 2 21,76 .857 10,97 .432 5,5 .22 6,4 .250 - - - - 0,07 .003
H
S
N
K
M
SLOTTING / HELICAL
EDPT180508PDERGD EP1808E 2 21,76 .857 10,97 .432 5,5 .22 0,8 .032 2,69 .106 - - 0,10 .004
EDPT180508PDSRGD EP1808S 2 21,76 .857 10,97 .432 5,5 .22 0,8 .032 2,69 .106 - - 0,18 .007
EDPT180512PDERGD EP1812E 2 21,76 .857 10,97 .432 5,5 .22 1,2 .047 2,29 .090 - - 0,10 .004
EDPT180512PDSRGD EP1812S 2 21,76 .857 10,97 .432 5,5 .22 1,2 .047 2,29 .090 - - 0,18 .007
EDPT180516PDERGD EP1816E 2 21,76 .857 10,97 .432 5,5 .22 1,6 .063 1,90 .075 - - 0,10 .004
EDPT180516PDSRGD EP1816S 2 21,76 .857 10,97 .432 5,5 .22 1,6 .063 1,90 .075 - - 0,18 .007
EDPT180524PDERGD EP1824E 2 21,76 .857 10,97 .432 5,5 .22 2,4 .093 1,11 .044 - - 0,10 .004
EDPT180532PDERGD EP1832E 2 21,76 .857 10,97 .432 5,5 .22 3,2 .125 0,32 .013 - - 0,10 .004
EDPT180532PDSRGD EP1832S 2 21,76 .857 10,97 .432 5,5 .22 3,2 .125 0,32 .013 - - 0,18 .007
EDPT180548PDERGD EP1848E* 2 21,76 .857 10,97 .432 5,5 .22 4,8 .187 - - - - 0,10 .004
EDPT180564PDERGD EP1864E* 2 21,76 .857 10,97 .432 5,5 .22 6,4 .250 - - - 0,10 .004
DIE & MOLD
NOTE: Inserts and milling cutters available Jan. 2006.
Order example:
1x 25A02R050A25SED18
10 x EDCT180504PDERGD
B56
*Standard cutter bodies have to be relieved
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Indexable End Mills and Shell Mills – Mill 1-18
Mill 1
NEW
End Mills End Mills D6
Shell Mills
D
K1
D1
D
D1
D
L
90°
AP1
L2
L
90°
AP1
L2
L
D1
AP1
90°
INSERTS
metric
D1
Order
number
ISO
Catalog number
Number
of
Inserts Z D L
L2
25 2613785 25A02R050A25SED18-170 2 25 170 50 18 17° 0,50 37000
32 2613788 32A02R050A32SED18-200 2 32 200 50 18 10,5° 1,10 32140
32 2613786 32A03R050A32SED18-200 3 32 200 50 18 10,5° 1,10 32140
40 2613789 40A03R050A32SED18-200 3 32 200 50 18 7,5° 1,20 28220
40 2613787 40A04R050A32SED18-200 4 32 200 50 18 7,5° 1,20 28220
metric
D1
Order
number
End Mills
End Mills
ISO
Catalog number
Cylindrical
Shank
Weldon
Shank
Number
of
Inserts Z D L
L2
25 2390446 25A02R044B25SED18 2 25 100 44 18 17° 0,30 37000
32 2390448 32A03R050B32SED18 3 32 110 50 18 10,5° 0,50 33000
40 2417191 40A03R050B32SED18 3 32 110 50 18 7,5° 0,70 30000
40 2390450 40A04R050B32SED18 4 32 110 50 18 7,5° 0,60 30000
AP1
AP1
max.
Ramp
Angle
max.
Ramp
Angle
Kg
Kg
max.
RPM
max.
RPM
FACE MILLING
metric
D1
Order
number
Shell Mills
ISO
Catalog number
Medium
Pitch
Number
of
Inserts Z D D6 L K1 AP1
50 2417185 50A04RS90ED18D 4 22 45 40 10,48 18 5° 0,30 24890
63 2417186 63A05RS90ED18D 5 22 50 40 10,48 18 4° 0,50 21910
80 2417187 80A06RS90ED18D 6 27 60 50 12,48 18 3° 1,10 19270
100 2417188 100A07RS90ED18D 7 32 80 50 14,48 18 2° 1,80 17120
125 2417189 125B08RS90ED18D 8 40 90 63 16,48 18 1,5° 3,20 15230
160 2417190 160C10RS90ED18D 10 40 100 63 16,48 18 1,2° 4,60 13400
max.
Ramp
Angle
Kg
max.
RPM
MILLING
END MILLING
metric
D1
Order
number
Shell Mills
ISO
Catalog number
Fine
Pitch
Number
of
Inserts Z D D6 L K1 AP1
50 2417183 50A05RS90ED18D 5 22 45 40 10,48 18 5 0,30 24890
63 2390483 63A06RS90ED18D 6 22 50 40 10,48 18 4° 0,50 21910
80 2417184 80A07RS90ED18D 7 27 60 50 12,48 18 3° 1,00 19270
100 2390485 100A08RS90ED18D 8 32 80 50 14,48 18 2° 1,80 17120
125 2390486 125B09RS90ED18D 9 40 90 63 16,48 18 1,5° 3,10 15230
160 2390487 160C12RS90ED18D 12 40 100 63 16,48 18 1,2° 4,40 13400
max.
Ramp
Angle
Kg
max.
RPM
SLOTTING / HELICAL
metric
Spare Parts
End Mills
Insert Torx Plus
Torx Plus
D1
Screw Wrench Nm Wrench
Ø 25, 32, 40 MS2126 TTP15 3,4 DT15IP
DIE & MOLD
Shell Mills
D1
Mounting Screw
Coolant Cap
Insert
Screw
Torx Plus
Wrench
Nm
Torx Plus
Wrench
50 & 63 129.025 - MS2126 TTP15 3,4 DT15IP
80 MS2038 - MS2126 TTP15 3,4 DT15IP
100 MS1254 - MS2126 TTP15 3,4 DT15IP
125 420.200 470.232 MS2126 TTP15 3,4 DT15IP
160 420.200 470.233 MS2126 TTP15 3,4 DT15IP
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B57

Mill 1
NEW
Indexable Inserts for Mill 1-18
LD/GD
BS
W
INSERTS
Rε
L1
15°
S
FACE MILLING
END MILLING
MILLING
inch
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
mm
LI
inch
mm
W S Rε
BS
inch
mm
inch
Dimensions
mm
inch
mm
inch
First Choice
Alternate Choice
mm
inch
P
Chipload min.
fz min.
mm
inch
KC410M
KC520M
KC522M
KC725M
KC915M
KC935M
EDCT180504PDERGD EC1804E 2 21,76 .857 10,97 .432 5,5 .22 0,4 .015 3,07 .121 - - 0,10 .004
EDCT180504PDFRLDJ EC1804FJ 2 21,76 .857 10,97 .432 5,5 .22 0,4 .015 3,07 .121 - - 0,07 .003
EDCT180508PDERGD EC1808E 2 21,76 .857 10,97 .432 5,5 .22 0,8 .032 2,69 .106 - - 0,10 .004
EDCT180508PDERLD EC1808E2 2 21,76 .857 10,97 .432 5,5 .22 0,8 .032 2,69 .106 - - 0,08 .003
EDCT180508PDFRLDJ EC1808FJ 2 21,76 .857 10,97 .432 5,5 .22 0,8 .032 2,69 .106 - - 0,07 .003
EDCT180512PDERGD EC1812E 2 21,76 .857 10,97 .432 5,5 .22 1,2 .047 2,29 .090 - - 0,10 .004
EDCT180512PDFRLDJ EC1812FJ 2 21,76 .857 10,97 .432 5,5 .22 1,2 .047 2,29 .090 - - 0,07 .003
EDCT180516PDERLD EC1816E 2 21,76 .857 10,97 .432 5,5 .22 1,6 .063 1,90 .075 - - 0,08 .003
EDCT180516PDFRLDJ EC1816FJ 2 21,76 .857 10,97 .432 5,5 .22 1,6 .063 1,90 .075 - - 0,07 .003
EDCT180520PDFRLDJ EC1820FJ 2 21,76 .857 10,97 .432 5,5 .22 2,0 .078 1,49 0,59 - - 0,07 .003
EDCT180524PDFRLDJ EC1824FJ 2 21,76 .857 10,97 .432 5,5 .22 2,4 .093 1,11 .044 - - 0,07 .003
EDCT180532PDERLD EC1832E 2 21,76 .857 10,97 .432 5,5 .22 3,2 .125 0,32 .013 - - 0,08 .003
EDCT180532PDFRLDJ EC1832FJ 2 21,76 .857 10,97 .432 5,5 .22 3,2 .125 0,32 .013 - - 0,07 .003
EDCT180540PDERLD EC1840E 2 21,76 .857 10,97 .432 5,5 .22 4,0 .156 - - - - 0,08 .003
EDCT180540PDFRLDJ EC1840FJ 2 21,76 .857 10,97 .432 5,5 .22 4,0 .156 - - - - 0,07 .003
EDCT180548PDERLD EC1848E* 2 21,76 .857 10,97 .432 5,5 .22 4,8 .187 - - - - 0,08 .003
EDCT180548PDFRLDJ EC1848FJ* 2 21,76 .857 10,97 .432 5,5 .22 4,8 .187 - - - - 0,07 .003
EDCT180564PDERLD EC1864E* 2 21,76 .857 10,97 .432 5,5 .22 6,4 .250 - - - - 0,08 .003
EDCT180564PDFRLDJ EC1864FJ* 2 21,76 .857 10,97 .432 5,5 .22 6,4 .250 - - - - 0,07 .003
H
S
N
K
M
SLOTTING / HELICAL
EDPT180508PDERGD EP1808E 2 21,76 .857 10,97 .432 5,5 .22 0,8 .032 2,69 .106 - - 0,10 .004
EDPT180508PDSRGD EP1808S 2 21,76 .857 10,97 .432 5,5 .22 0,8 .032 2,69 .106 - - 0,18 .007
EDPT180512PDERGD EP1812E 2 21,76 .857 10,97 .432 5,5 .22 1,2 .047 2,29 .090 - - 0,10 .004
EDPT180512PDSRGD EP1812S 2 21,76 .857 10,97 .432 5,5 .22 1,2 .047 2,29 .090 - - 0,18 .007
EDPT180516PDERGD EP1816E 2 21,76 .857 10,97 .432 5,5 .22 1,6 .063 1,90 .075 - - 0,10 .004
EDPT180516PDSRGD EP1816S 2 21,76 .857 10,97 .432 5,5 .22 1,6 .063 1,90 .075 - - 0,18 .007
EDPT180524PDERGD EP1824E 2 21,76 .857 10,97 .432 5,5 .22 2,4 .093 1,11 .044 - - 0,10 .004
EDPT180532PDERGD EP1832E 2 21,76 .857 10,97 .432 5,5 .22 3,2 .125 0,32 .013 - - 0,10 .004
EDPT180532PDSRGD EP1832S 2 21,76 .857 10,97 .432 5,5 .22 3,2 .125 0,32 .013 - - 0,18 .007
EDPT180548PDERGD EP1848E* 2 21,76 .857 10,97 .432 5,5 .22 4,8 .187 - - - - 0,10 .004
EDPT180564PDERGD EP1864E* 2 21,76 .857 10,97 .432 5,5 .22 6,4 .250 - - - - 0,10 .004
DIE & MOLD
Order example:
1x M1D100E1802W075L175
10 x EC1804E
*Factory relieved bodies available for this radius
B58
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Indexable End Mills – Mill 1-18
Mill 1
NEW
D1
D
90°
AP1
L2
L
INSERTS
inch
D1
Order
number
End Mills
ANSI
Catalog number
Cylindrical
Shank
Number
of
Inserts Z D L
L2
1.00 2267534 M1D100E1802C100L800* 2 1.00 8.00 3.75 18 16.5° 1.50 37000
1.00 2267535 M1D100E1802C100L1000* 2 1.00 10.00 3.75 18 16.5° 2.00 37000
1.25 2267536 M1D125E1802C125L800* 2 1.25 8.00 4.25 18 10.5° 2.40 32300
1.25 2267537 M1D125E1802C125L1000* 2 1.25 10.00 4.25 18 10.5° 3.10 32300
1.50 2267538 M1D150E1803C125L800 3 1.25 8.00 4.25 18 8° 3.00 29020
1.50 2267539 M1D150E1803C125L1000 3 1.25 10.00 4.25 18 8° 3.70 29020
* Cylindrical shank no through coolant
AP1
max.
Ramp
Angle
lbs.
max.
RPM
FACE MILLING
inch
D1
Order
number
End Mills
ANSI
Catalog number
Weldon
Shank
Number
of
Inserts Z D L
L2
.97 2267545 M1D097E1802W100L175 2 1.00 4.00 1.75 18 17.5° .70 37000
1.00 2267546 M1D100E1802W075L175 2 .75 4.00 1.75 18 16.5° .50 37000
1.00 2452372 M1D100E1802W100L175 2 .75 4.00 1.75 18 16.5° .70 37000
1.00 2267550 M1D100E1802W100L175R** 2 1.00 4.00 1.75 18 16.5° .70 37000
1.00 2267547 M1D100E1802W100L375 2 1.00 6.00 3.75 18 16.5° 1.00 37000
1.00 2267552 M1D100E1802W100L375R** 2 1.00 6.00 3.75 18 16.5° 1.10 37000
1.25 2452414 M1D125E1803W100L225 3 1.00 4.53 2.25 18 10.5° .90 32300
1.25 2267623 M1D125E1803W125L225 3 1.25 4.50 2.25 18 10.5° 1.20 32300
1.25 2267624 M1D125E1803W125L225R** 3 1.25 4.50 2.25 18 10.5° 1.20 32300
1.25 2267625 M1D125E1803W125L425 3 1.25 6.50 4.25 18 10.5° 1.80 32300
1.25 2267626 M1D125E1803W125L425R** 3 1.25 6.50 4.25 18 10.5° 1.80 32300
1.50 2267627 M1D150E1803W125L225 3 1.25 4.50 2.25 18 8° 1.50 29020
1.50 2267629 M1D150E1804W125L225 4 1.25 4.50 2.25 18 8° 1.40 29020
1.50 2267628 M1D150E1804W125L225R** 4 1.25 4.50 2.25 18 8° 1.40 29020
1.50 2267651 M1D150E1803W125L425 3 1.25 6.50 4.25 18 8° 2.40 29020
1.50 2267631 M1D150E1803W125L425R** 3 1.25 6.50 4.25 18 8° 2.40 29020
2.00 2267621 M1D200E1805W125L225 5 1.25 4.50 2.25 18 5° 2.00 26000
** Factory relieved for insert radii .187 and .250.
inch
Spare Parts
AP1
max.
Ramp
Angle
lbs.
max.
RPM
MILLING
END MILLING
SLOTTING / HELICAL
End Mills
Insert Torx Plus
Torx Plus
D1
Screw Wrench in.-lbs. Wrench
.97, 1.0, 1.25, 1.5, 2.0 MS2126 TTP15 30 DT15IP
DIE & MOLD
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B59

Mill 1
NEW
Indexable End Mills and Shell Mills – Mill 1-18
End Mills
Shell Mills
D6
D
K1
D1
L
INSERTS
90°
AP1
L2
CV40
L1 BT40 D1
AP1
90°
FACE MILLING
inch
D1
Order
number
End Mills
ANSI
Catalog number
Number
of
Inserts Z
Steep Taper
BT40
System
Size L2 L1 AP1
1.00 2541968 M1D100E1802BT40L250 2 BT40 1.312 2.50 18 16.5° 2.74 37000
1.00 2541969 M1D100E1802BT40L450 2 BT40 2.625 4.50 18 16.5° 2.85 37000
1.25 2541985 M1D125E1803BT40L288 3 BT40 1.687 2.88 18 10.5° 2.40 32300
1.25 2541986 M1D125E1803BT40L488 3 BT40 3.000 4.88 18 10.5° 3.21 32300
1.50 2541983 M1D150E1804BT40L288 4 BT40 1.687 2.88 18 8° 2.58 29020
1.50 2541984 M1D150E1804BT40L488 4 BT40 3.000 4.88 18 8° 3.59 29020
max.
Ramp
Angle
Ibs.
max.
RPM
END MILLING
MILLING
inch
D1
Order
number
End Mills
ANSI
Catalog number
Number
of
Inserts Z
Steep Taper
CV40
System
Size L2 L1 AP1
1.00 2267549 M1D100E1802CV40L250 2 CV40 1.625 2.50 18 16.5° 2.00 37000
1.00 2541967 M1D100E1802CV40L450 2 CV40 2.625 4.50 18 16.5° 2.74 37000
1.25 2267551 M1D125E1803CV40L288 3 CV40 2.000 2.88 18 10.5° 3.07 32300
1.25 2541970 M1D125E1803CV40L488 3 CV40 3.000 4.88 18 10.5° 3.07 32300
1.50 2267548 M1D150E1804CV40L288 4 CV40 2.000 2.88 18 8° 2.40 29020
1.50 2541972 M1D150E1804CV40L488 4 CV40 3.000 4.88 18 8° 3.46 29020
max.
Ramp
Angle
Ibs.
max.
RPM
inch
Shell Mills
SLOTTING / HELICAL
DIE & MOLD
D1
*SS -"Speed Screw" differential lock-up system
inch
Order
number
ANSI
Catalog number
Number
of
Inserts Z D D6 L K1 AP1
2.00 2267541 M1D200E1803SS075L157* 3 .75 1.687 1.57 .33 18 5° .80 26000
2.00 2267542 M1D200E1803S075L157 3 .75 1.687 1.57 .33 18 5° .80 26000
2.00 2267650 M1D200E1805S075L157 5 .75 1.687 1.57 .33 18 5° .70 26000
2.00 2267540 M1D200E1805SS075L157* 5 .75 1.687 1.57 .33 18 5° .80 26000
2.50 2267614 M1D250E1804S075L157 4 .75 1.687 1.57 .33 18 4° 1.20 24000
2.50 2267632 M1D250E1806S075L157 6 .75 1.687 1.57 .33 18 4° 1.00 24000
2.50 2267613 M1D250E1806SS075L157* 6 .75 1.687 1.57 .33 18 4° 1.00 24000
3.00 2267616 M1D300E1805S100L175 5 1.00 2.907 1.75 .39 18 3° 1.70 21500
3.00 2267615 M1D300E1807SS100L175* 7 1.00 2.907 1.75 .39 18 3° 1.90 21500
3.00 2267643 M1D300E1807S100L175 7 1.00 2.907 1.75 .39 18 3° 1.70 21500
4.00 2267617 M1D400E1806S150L200 6 1.50 3.770 2.00 .62 18 2° 3.70 19000
4.00 2267644 M1D400E1808S150L200 8 1.50 3.770 2.00 .62 18 2° 3.60 19000
5.00 2267645 M1D500E1809S150L200 9 1.50 3.770 2.00 .62 18 1.5° 5.60 17000
6.00 2267646 M1D600E1808S150L200 8 1.50 3.770 2.00 .62 18 1.2° 7.90 15000
6.00 2267618 M1D600E1808S200L200 8 2.00 5.881 2.00 .75 18 1.2° 8.60 15000
6.00 2267619 M1D600E1810S200L200 10 2.00 5.881 2.00 .75 18 1.2° 8.50 15000
8.00 2267620 M1D800E1812S250L250 12 2.50 7.875 2.50 1.00 18 1° 16.70 13000
Spare Parts
*
max.
Ramp
Angle
Ibs.
max.
RPM
D1
D
Mounting
Screw
Insert
Screw
Torx Plus
Wrench
in.-lbs.
End Mills 1.0, 1.25, 1.5 - - MS2126 TTP15 30 DT15IP
Shell Mills 2.0, 2.5 Speed Screw* KLSS0712C* MS2126 TTP15 30 DT15IP
3.0 Speed Screw* KLSS1013C* MS2126 TTP15 30 DT15IP
2.0, 2.5 .75 S445CG MS2126 TTP15 30 DT15IP
2.5, 3.0 1.00 S2044CG MS2126 TTP15 30 DT15IP
4.0, 5.0, 6.0 1.50 KLS15C MS2126 TTP15 30 DT15IP
6.0 2.00 KLS20C MS2126 TTP15 30 DT15IP
8.0 2.50 - MS2126 TTP15 30 DT15IP
*Speed screw to mount shell mill on adapter
B60
Torx Plus
Wrench
To place an order, contact your Kennametal representative or visit www.kennametal.com.

IN MILLING
Introducing Kennametal’s
new Mill1 TM
System...
new
...engineered specifically to
streamline your end-milling
operations!
• Attain the metalcutting industry’s
top speeds!
• 18 mm depth-of-cut, straight wall –
with true 90° cutting capability!
• Available in 25 mm (1”) to 160 mm (8”)
diameters, all loaded with Kennametal’s
industry-best M-grade 5,5 mm-thick
inserts!
• For unsurpassed ramping!
• Offered in a complete array of
insert radii and body styles!
• Complementary shell and face mills,
with identical inserts, also available!
• Get superior surface finishes!
• Through-coolant standard!
• See page -Mill 14-14 B50
-Mill 1-19 B56
-Mill 1-25 B64
Kennametal will significantly boost
your milling productivity and profitability!
Let us prove it.
Call your Kennametal representative
or visit www.kennametal.com
©2005 by Kennametal Inc., Latrobe, Pa.
All rights reserved. • A03-55
B61

Mill 1-18
Application Data
INSERTS
FACE MILLING
END MILLING
MILLING
SLOTTING / HELICAL
DIE & MOLD
Cutting speed (Vc) – feet/min
Cutting speed (Vc) – feet/min
m/min ft/min
300 1000
270
240
210
180
150
120
90
60
30
900
800
700
600
500
400
300
200
100
0 .002
0,05
.004
0,10
Cutting speed (Vc) – feet/min
m/min
ft/min
360 1200
320 1050
270
230
180
140
90
50
m/min
900
750
600
450
300
150
ft/min
330 1100
300 1000
270 900
240 800
210 700
180 600
150 500
120 400
90 300
60 200
30 100
0 0
KC725M E
Steel Milling Grades
KC
935M E
KC725M S
0 .002 .004 .006 .008 .010 .012 .014 .016 .018 .020 .022
0,05 0,10 0,15 0,20 0,25 0,30 0,36 0,41 0,46 0,51 0,56
Chipload (fz) – ipt
Stainless Steel Milling Grades
KC935M E
KC522M E
0 .001 .002 .003 .004 .005 .006 .007 .008 .009 .010 .011
0,03 0,05 0,08 0,10 0,13 0,15 0,18 0,20 0,23 0,25 0,28
Chipload (fz) – ipt
Cast Iron Milling Grades
KC915M S
.006
0,15
KC935M S
KC725M E
.008
0,20
KC522M E
KC
520M E
.010
0,25
Chipload (fz) – ipt
.012
0,30
.014
0,36
inch
mm
inch
mm
Coolant
Coolant
Coolant
KC725M
▼ S
▼▼
KC725M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
KC935M
▼▼▼ E
▼▼▼▼
KC725M
▼▼E
▼▼▼
KC522M
▼▼ E
▼▼▼
KC935M
▼▼▼E
▼▼▼▼
KC522M
▼▼ E
▼▼▼
KC520M
▼▼ E
▼▼▼
KC915M
▼▼▼ S
▼▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
650
200
750
230
750
230
1000
300
speed
Vc
chipload
Fz

Mill 1-18
Application Data
Cutting speed (Vc) – feet/min
m/min ft/min
3000 9000
2400 8000
2100 7000
1800 6000
1500 5000
1200 4000
900 3000
600 2000
300 1000
0 0
Non-Ferrous Milling Grades
KC410M F
KC522M E
Coolant
Starting
operating
conditions
KC522M
▼ E
▼▼
KC410M
▼▼ F
▼▼▼
speed
Vc
ft/min
m/min
1000
300
1770
530
chipload
Fz
Free Machining
9%Si
(390,380)
speed
Vc
chipload
Fz
not
recommended
Copper,
Zinc,
Brass
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch ft/min inch
mm m/min mm m/min mm m/min mm
.015
0,40
.010
0,25
1500
450
Dry not recommended
.010
0,25
1100
330
.010
0,25
not
recommended
1770
530
Wet preferred
.010
0,25
Non-Metallics
INSERTS
0 .002
0,05
.004
0,10
.006
0,15
.008
0,20
.010
0,25
.012
0,30
.014
0,36
.016
0,41
.018
0,46
.020 inch
0,51 mm
Chipload (fz) – ipt
m/min ft/min
Cutting speed (Vc) – feet/min
80 260
70 240
70 220
60 200
50 180
50 160
40 140
40 120
30 100
20 80
20 60
10 40
High-Temperature Alloys Milling Grades
0 .001 .002
0,03 0,05
.003
0,08
.004
0,10
KC522M E
.005
0,13
KC725M E
.006
0,15
Chipload (f ) – ipt
.007
0,18
.008
0,20
.009
0,23
ramp angle
.010
0,25
inch
mm
ramping
Coolant
KC725M
▼▼E
▼▼▼
KC522M
▼▼ E
▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
helical
interpolation
100
30
130
40
chipload
Fz
Titanium
(Ti 6 Al 4 V)
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.005 100 .005 170 .005
0,15 30 0,15 50 0,15
.005
0,15
120
40
Dry not recommended
.005
0,15
200
60
.005
0,15
Nickel, Cobalt
Alloys (Inconel, Iron Alloys
Hastelloy, (X12NiCrSi3616,
Monel, X2NiCrAlTi3220)
Nimonic)
Cutting
dia.
[mm]
Wet preferred
Ramp
Angle
max. [°]
Ø
DH min.
[mm]
Ø
DHI max.
[mm]
MILLING
SLOTTING / HELICAL
END MILLING
FACE MILLING
shoulder cut
Ø DH/DHI
25 17,0 30 46
32 10,5 44 60
40 7,5 60 76
50 5,0 80 96
63 4,0 105 122
80 3,0 140 157
100 2,0 180 197
125 1,5 230 247
160 1,2 300 317
DIE & MOLD
DH min. = Min. blind hole diameter with helical interpolation
DHI max. = Max. blind hole diameter with flat bottom
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B63

Mill 1-MAX
NEW
Indexable Inserts for Mill 1-25 KEGT...
KEGT-LDJ
KEEW-LNJ
W
BS
W
BS
INSERTS
R
ε
LI
20°
S
R
ε
LI
20°
S
metric
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
mm
LI
inch
mm
W S Rε
inch
mm
inch
Dimensions
mm
inch
mm
BS
inch
First Choice
Alternate Choice
mm
inch
P
Chipload min.
fz min.
mm inch
KEGT25L508PEERLDJ KG2508ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 0,8 .031 5,34 .210 - - 0,20 .008
KEGT25L512PEERLDJ KG2512ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 1,2 .047 4,94 .195 - - 0,20 .008
KEGT25L516PEERLDJ KG2516ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 1,6 .062 4,55 .179 - - 0,20 .008
KEGT25L520PEERLDJ KG2520ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 2,0 .079 4,15 .164 - - 0,20 .008
KEGT25L524PEERLDJ KG2524ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 2,4 .094 3,78 .149 - - 0,20 .008
KEGT25L531PEERLDJ KG2531ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 3,1 .122 3,06 .120 - - 0,20 .008
KEGT25L540PEERLDJ KG2540ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 4,0 .157 2,16 .085 - - 0,20 .008
KEGT25L547PEERLDJ KG2547ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 4,7 .187 1,40 .055 - - 0,20 .008
KEGT25L550PEERLDJ KG2550ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 5,0 .196 1,14 .045 - - 0,20 .008
KEGT25L560PEERLDJ KG2560ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 6,0 .236 0,13 .005 - - 0,20 .008
KEGT25L564PEERLDJ KG2564ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 6,4 .250 - - - - 0,20 .008
KEEW25L508PEFR-LNJ KE2508FLNJ 2 31,47 1.24 14,60 .575 5,21 .205 0,8 .031 5,34 .210 - - 0,20 .008
KEEW25L516PEFR-LNJ KE2516FLNJ 2 31,47 1.24 14,60 .575 5,21 .205 1,6 .062 4,55 .179 - - 0,20 .008
KEEW25L531PEFR-LNJ KE2531FLNJ 2 31,47 1.24 14,60 .575 5,21 .205 3,1 .122 3,06 .120 - - 0,20 .008
KEEW25L547PEFR-LNJ KE2547FLNJ 2 31,47 1.24 14,60 .575 5,21 .205 4,7 .187 1,40 .055 - - 0,20 .008
H
S
N
K
M
DIE & MOLD
SLOTTING / HELICAL
K313
KC410M
FACE MILLING
END MILLING
MILLING
Order example:
1x 40A02R50A32SKE25
10 x KEGT25L508PEERLDJ
B64
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Indexable End Mills and Shell Mills for Aluminum Machining – Mill 1-25
Mill 1-MAX
NEW
End Mills
Monoblocks
D6
D
K1
Shell Mills
D1
D
D1
System
Size
90°
AP1
L2
L
90°
AP1
L3
L1
L
D1
0°
AP1
L
INSERTS
metric
D1
End Mills
Order
number
ISO
Catalog number
ANSI
Catalog number
Cylindical
Shank
Number
of
inserts Z D L L2 AP1
40 2649569 40A02R50A32SKE25 M1D040MK2502A032L050 2 32 111 50 25 0,606 15° 24300
40 2479504 40A02R80A32SKE25 M1D040MK2502A032L080 2 32 141 80 25 0,855 15° 24300
50 2649570 50A02R80A32SKE25 M1D050MK2502A032L080 2 32 141 80 25 1,176 10º 20600
50 2500741 50A03R80A32SKE25 M1D050MK2503A032L080 3 32 141 80 25 1,104 10º 20600
50 2649571 50A02R100A32SKE25 M1D050MK2502A032L100 2 32 161 100 25 1,433 10º 20600
50 2649572 50A03R100A32SKE25 M1D050MK2503A032L100 3 32 161 100 25 1,347 10º 20600
Kg
Ramp
Angle
max.
RPM
FACE MILLING
metric
HSK63A – Monoblocks
D1
Order
number
ISO
Catalog number
ANSI
Catalog number
System
Size L1 L L3 AP1 Kg
40 2880433 40A02R121S63SKE25 M1D040MK2502HSK63L121 2 HSK63A 120,95 153 88,60 25 1,25 15° 24300
40 2880434 40A02R110S63SKE25 M1D040MK2502HSK63L110 2 HSK63A 109,95 142 77,60 25 1,16 15° 24300
40 2880435 40A02R140S63SKE25 M1D040MK2502HSK63L140 2 HSK63A 139,95 172 107,65 25 1,41 15° 24300
50 2506995 50A02R110S63SKE25 M1D050MK2502HSK63L110 2 HSK63A 109,95 142 84,00 25 1,52 10º 20600
50 2880437 50A02R140S63SKE25 M1D050MK2502HSK63L140 2 HSK63A 139,95 172 114,00 25 1,90 10º 20600
50 2506994 50A03R110S63SKE25 M1D050MK2503HSK63L110 3 HSK63A 109,95 142 84,00 25 1,45 10º 20600
50 2880439 50A03R140S63SKE25 M1D050MK2503HSK63L140 3 HSK63A 139,95 172 114,00 25 1,83 10º 20600
Ramp
Angle
max.
RPM
MILLING
END MILLING
metric
Shell Mills
D1
Order
number
ISO
Catalog number
Number
of
Inserts Z D D6 L K1 AP1 Kg
52 2878139 52A02RS90KE25 M1D052MK2502S022L058 2 22 50 58 10,5 25 0,5 10º 20000 MS1235CG
63 - 63A02RS90KE25 M1D063MK2502S022L055 2 22 50 55 10,5 25 0,7 7º 17600 MS1242CG
63 - 63A03RS90KE25 M1D063MK2503S022L055 3 22 50 55 10,5 25 0,6 7º 17600 MS1242CG
80 2496538 80A03RS90KE25 M1D080MK2503S027L060 3 27 60 60 12,5 25 1,0 5º 15100 MS2038CG
100 - 100A04RS90KE25 M1D100MK2504S032L060 4 32 78 60 14,5 25 1,8 3,5º 13200 MS2169C
metric
Spare Parts
ANSI
Catalog number
Ramp
Angle
max.
RPM
Mounting
Screw
SLOTTING / HELICAL
Insert
Torx
Screw
Wrench Nm
MS1374 DT15 4
Balancing screw KUAM-27 must be ordered separately.
DIE & MOLD
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B65

Mill 1-MAX
NEW
Indexable Inserts for Mill 1-25
KEGT-LDJ
KEEW-LNJ
W
BS
W
BS
INSERTS
R
ε
LI
20°
S
R
ε
LI
20°
S
FACE MILLING
inch
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
mm
LI
inch
mm
inch
mm
inch
Dimensions
W S Rε
mm
inch
mm
BS
inch
First Choice
Alternate Choice
mm
inch
P
Chipload min.
fz min.
mm inch
KEGT25L508PEERLDJ KG2508ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 0,8 .031 5,34 .210 - - 0,20 .008
KEGT25L512PEERLDJ KG2512ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 1,2 .047 4,94 .195 - - 0,20 .008
KEGT25L516PEERLDJ KG2516ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 1,6 .062 4,55 .179 - - 0,20 .008
KEGT25L520PEERLDJ KG2520ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 2,0 .079 4,15 .164 - - 0,20 .008
KEGT25L524PEERLDJ KG2524ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 2,4 .094 3,78 .149 - - 0,20 .008
KEGT25L531PEERLDJ KG2531ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 3,1 .122 3,06 .120 - - 0,20 .008
KEGT25L540PEERLDJ KG2540ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 4,0 .157 2,16 .085 - - 0,20 .008
KEGT25L547PEERLDJ KG2547ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 4,7 .187 1,40 .055 - - 0,20 .008
KEGT25L550PEERLDJ KG2550ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 5,0 .196 1,14 .045 - - 0,20 .008
KEGT25L560PEERLDJ KG2560ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 6,0 .236 1,13 .005 - - 0,20 .008
KEGT25L564PEERLDJ KG2564ELDJ 2 31,47 1.24 14,60 .575 5,21 .205 6,4 .250 - - - - 0,20 .008
KEEW25L508PEFRLNJ KE2508FLNJ 2 31,47 1.24 14,60 .575 5,21 .205 0,8 .031 5,34 .210 - - 0,20 .008
KEEW25L516PEFRLNJ KE2516FLNJ 2 31,47 1.24 14,60 .575 5,21 .205 1,6 .062 4,55 .179 - - 0,20 .008
KEEW25L531PEFRLNJ KE2531FLNJ 2 31,47 1.24 14,60 .575 5,21 .205 3,1 .122 3,06 .120 - - 0,20 .008
KEEW25L547PEFRLNJ KE2547FLNJ 2 31,47 1.24 14,60 .575 5,21 .205 4,7 .187 1,40 .055 - - 0,20 .008
H
S
N
K
M
DIE & MOLD
K313
KC410M
SLOTTING / HELICAL
END MILLING
MILLING
Order example:
1x M1D150K2502W125L200
10 x KG2508ELDJ
B66
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Indexable End Mills and Shell Mills for Aluminum Machining – Mill 1-25
Mill 1-MAX
NEW
End Mills Monoblocks
D6
D
Shell Mills
K1
D1
D
D1
System
Size
90°
AP1
L2
L
90°
AP1
L3
L1
L
D1
0°
AP1
L
INSERTS
inch
End Mills
D1
Order
number
ANSI
Catalog number
ISO
Catalog number
Number
of
Inserts Z D L L2 AP1
1.5 2530318 M1D150K2502C125L200 40A02R051A32SKE25-U 2 1.25 4.28 2.0 .984 1.21 16.0º 25200
1.5 2530319 M1D150K2502C125L300 40A02R076A32SKE25-U 2 1.25 5.28 3.0 .984 1.65 16.0º 25200
1.5 2530320 M1D150K2502C125L400 40A02R100A32SKE25-U 2 1.25 6.28 4.0 .984 2.07 16.0º 25200
2.0 2530321 M1D200K2502C125L200 50A02R051A32SKE25-U 2 1.25 4.28 2.0 .984 1.79 9.5º 20300
2.0 2530322 M1D200K2503C125L200 50A03R051A32SKE25-U 3 1.25 4.28 2.0 .984 1.54 9.5º 20300
2.0 2530353 M1D200K2502C125L300 50A02R076A32SKE25-U 2 1.25 5.28 3.0 .984 2.48 9.5º 20300
2.0 2530354 M1D200K2503C125L300 50A03R076A32SKE25-U 3 1.25 5.28 3.0 .984 2.28 9.5º 20300
lbs.
Ramp
Angle
max.
RPM
FACE MILLING
inch
End Mills
D1
Order
number
ANSI
Catalog number
ISO
Catalog number
Number
of
Inserts Z
L L2 AP1
1.5 2530317 M1D150K2502W125L200 40A02R051B32SKE25-U 2 1.25 4.28 2.0 .984 1.21 16.0º 25200
D
lbs.
Ramp
Angle
max.
RPM
inch
inch
D1
1.5 2530357 M1D150K2502HSK63L477 40A02R121S63SKE25-U 2 HSK63A 4.772 6.028 3.500 2.60 16.0º 25200
1.5 2530358 M1D150K2502CV50L475 40A02R120H50SKE25-U 2 CV50 4.750 8.750 3.125 8.00 16.0º 25200
2.0 2530360 M1D200K2502HSK63L477 50A02R121S63SKE25-U 2 HSK63A 4.772 6.028 3.750 3.74 10.0º 20300
2.0 2530361 M1D200K2503HSK63L477 50A03R121S63SKE25-U 3 HSK63A 4.772 6.028 3.750 3.58 10.0º 20300
2.0 2530359 M1D200K2502CV50L475 50A02R120H50SKE25-U 2 CV50 4.750 8.750 3.125 9.03 10.0º 20300
2.0 2530362 M1D200K2503CV50L475 50A03R120H50SKE25-U 3 CV50 4.750 8.750 3.125 8.87 10.0º 20300
2.0 2530373 M1D200K2502CV50L700 50A02R177H50SKE25-U 2 CV50 7.000 11.000 5.375 10.85 10.0º 20300
2.0 2530374 M1D200K2503CV50L700 50A03R177H50SKE25-U 3 CV50 7.000 11.000 5.375 10.60 10.0º 20300
D1
Monoblocks
Order
number
Shell Mills
Order
number
ANSI
Catalog number
ANSI
Catalog number
ISO
Catalog number
ISO
Catalog number
Number
of
Inserts Z
2.0 2581445 M1D200K2502S075L200 52A02RS90KE25-U 2 .75 1.750 2.00 .33 .92 10.0º 20300 S445CG
2.5 2581446 M1D250K2502S100L225 63A02RS90KE25-U 2 1.00 2.190 2.25 .39 1.72 7.0º 17500 S459CG
2.5 2581447 M1D250K2503S100L225 63A03RS90KE25-U 3 1.00 2.190 2.25 .39 1.49 7.0º 17500 S459CG
3.0 2496869 M1D300K2503S100L225 80A03RS90KE25-U 3 1.00 2.190 2.25 .39 2.33 5.0º 15600 S458CG
4.0 2581449 M1D400K2504S125L225 100B04RS90KE25-U 4 1.25 2.880 2.25 .50 3.83 3.5º 13100 S2164C
5.0 2581479 M1D500K2505S150L225 125B05RS90KE25-U 5 1.50 3.810 2.25 .62 5.96 2.5º 11500 S2163C
System
Size
L1
Number
of
Inserts Z D D6 L K1
L
L3
lbs.
lbs.
Ramp
Angle
Ramp
Angle
max.
RPM
max.
RPM
Mounting
Screw
MILLING
DIE & MOLD
SLOTTING / HELICAL
END MILLING
inch
Spare Parts
Insert
Torx
Screw
Wrench in.-lbs.
MS2157 TTP15 35
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B67

Mill 1-25
Application Data
INSERTS
Cutting speed (Vc) – feet/min
m/min
3000
2700
2400
2100
1800
1500
1200
900
600
300
0
ft/min
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
Non-Ferrous Milling Grades
KC410M E
K313 F
0 .005 .010 .015 .020
0,13 0,25 0,38 0,51
.025
0,64
.030
0,76
.035
0,89
inch
mm
Coolant
speed
Vc
Starting ft/min
operating
conditions m/min
Dry not
recommended
chipload
Fz
inch
mm
KC410M
▼ E
▼▼
K313
▼ F
▼▼
3500
1050
2500
750
.010
0,25
.015
0,40
Free Machining

®
FOR
AEROSPACE
®
Kennametal enables leading
aerospace manufacturers to reduce
cost and risk. Every day, in 60
countries worldwide – we deliver
proven, certified tooling innovations
and process-optimization services
to meet tough productivity targets.
Airframe
Kennametal Complete
Our “Kennametal Complete”
suite of global metalcutting
services, custom-engineered
solutions, and alliance partnerships
can provide you total turnkey
solutions – including value-chain
and process-optimization
enhancements – to maximize your
productivity and profitability!
Landing Gear
Engine Component
The new “Aerospace Solutions“
CD: Please ask your Kennametal
representative.
(Order no.: A04-43)
Additional information:
Visit us online at
www.kennametal.com
or ask your Kennametal representative!
B69

Solid Carbide End Mills for Turbine Blade Machining
NEW
Tapered End Mill, Taper Angle 4° and 6°, 30° Helix, Shank A
R
INSERTS
D1MAX D1
E
AP1
L2
L
LS
D
FACE MILLING
mm
Diameter
D1
inch
First Choice
Alternate Choice
Catalog
number
H
S
N
K
M
P
K600
KC633M
Cylindrical
Shank
D D1 max L AP1 LS L2 R
Number of
Flutes
Z
A A
4 .157 F4AW0400AWL30W040 8 8 76 30 40 36 2,0 4 4°
5 .197 F4AW0500AWL30W040 10 10 89 38 45 44 2,5 4 4°
6 .236 F4AW0600AWL30W040 12 12 100 45 45 55 3,0 4 4°
8 .315 F4AW0800AWL30W040 16 16 100 46 48 52 4,0 4 4°
10 .394 F4AW1000AWX30W040 16 16 110 47 50 60 5,0 4 4°
4 .157 F4AW0400AWL30W060 10 10 89 30 40 49 2,0 4 6°
5 .197 F4AW0500AWL30W060 12 12 100 35 45 55 2,5 4 6°
6 .236 F4AW0600AWL30W060 16 16 110 41 48 62 3,0 4 6°
8 .315 F4AW0800AWL30W060 16 16 110 42 48 62 4,0 4 6°
10 .394 F4AW1000AWX30W060 20 20 125 44 50 75 5,0 4 6°
E
END MILLING
MILLING
NEW
Multi-Flute End Mills Necked and with Edge Radius, DIN 6527 Short, 45° Helix, Shank A
SLOTTING / HELICAL
D1
R
AP1 D3
L2
L
LS
D
DIE & MOLD
mm
Diameter
D1
inch
First Choice
Alternate Choice
Catalog
number
H
S
N
K
M
P
K600
KC633M
Cylindrical
Shank
D D3 L AP1 LS L2 R
A A
8 .315 F8AJ0800ADK45E160 8 7 58 8 36 16 1,00 8
10 .394 F8AJ1000ADK45E200 10 9 66 10 40 20 1,00 8
12 .472 F8AJ1200ADK45E240 12 11 73 12 45 24 1,00 8
16 .630 F10AJ1600ADK45E320 16 15 82 16 48 32 1,00 10
20 .787 F10AJ2000ADK45E400 20 19 92 20 50 40 1,00 10
Number of
Flutes
Z
Order example:
10 x F4AW0400AWL30W040
B70
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Solid Carbide End Mills – Tapered and Multi-Flutes
Application Data
WOC/ae
DOC/ap
1) These guidelines may require possible variations to achieve optimum results.
Gray Cast Iron (120-220 HB)

Solid Carbide End Mill Rougher for Aluminum
NEW
Aluminum Rougher – New Generation – Necked with Edge Radius
INSERTS
D1
Rε
AP1
D3
L2
L
LS
D
FACE MILLING
mm
Diameter
D1
inch
First Choice
Alternate Choice
Catalog
number
H
S
N
K
M
P
K600
Cylindrical
Shank
D D3 L AP1 LS L2 Rε
A
6 .236 F3BA0600ADL40E180 6 5 57 8 36 18 0,25 3
8 .315 F3BA0800ADL40E240 8 7 63 10 36 24 0,25 3
10 .394 F3BA1000ADL40E300 10 9 72 12 40 30 0,25 3
12 .472 F3BA1200ADL40E360 12 11 83 15 45 36 0,25 3
16 .630 F3BA1600ADL40E480 16 15 92 20 48 48 1,00 3
20 .787 F3BA2000ADL40E600 20 19 104 24 50 60 1,00 3
Number of
Flutes
Z
DIE & MOLD
SLOTTING / HELICAL
END MILLING
MILLING
Order example:
10 x F3BA0600ADL40E180
B72
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Solid Carbide End Mill Rougher for Aluminum
Application Data
DOC/ap
DOC/ap
WOC/ae
1) These guidelines may require possible variations to achieve optimum results.
2) For WOC equal to .5 x diameter on profiling applications, decrease feed by 25%.
Aluminum and other Free-Machining, Non-Ferrous Materials, Low Silicon
Aluminum, 6061, 6063, 7075,
DIN/ISO: AlMg1SiCu, AlMg0,5Mn, AlZn5,5MgCu
INSERTS
Cutting
Speed SFM Vc
K600 600-1800 180-550
Reduce speed by 20% for
slotting applications.
Application Parameters
Profiling
Slotting
Diameter
mm inch
DOC/ap WOC/ae
1.5 x dia. .5 x dia
1 x dia. –
Profiling
Slotting
fz Feed/Tooth fz Feed/Tooth
mm inch mm inch
6 1/4 0,051 .0020 0,038 .0015
8 3/16 0,064 .0025 0,051 .0020
10 3/8 0,076 .0030 0,064 .0025
12 1/2 0,102 .0040 0,076 .0030
16 5/8 0,127 .0050 0,102 .0040
20 3/4 0,160 .0060 0,114 .0045
25 1 0,178 .0070 0,152 .0060
DIE & MOLD
SLOTTING / HELICAL
MILLING
END MILLING
FACE MILLING
To place an order, contact your Kennametal
representative or visit www.kennametal.com.
B73

KSSS Slot Milling System
No matter how
challenging your slot
milling operation,
Kennametal’s new
high-performance
KSSS slot milling
system will boost
your productivity and
profitability – and your
overall manufacturing
competitiveness!
• Patented cam adjustment!
• Full side and face!
• Half side and face!
• Arbor mount or radial drive,
shell mill style!
• 14 mm (.551") - 23 mm (.917") slot
width capability!
• Available in 100 mm (4.0") to 315 mm
(12") diameters, all loaded with
Kennametal’s industry-best M Grade,
KSSM inserts!
• For unsurpassed ease of width
adjustment!
• 4 cutting edges for economy
and reduced tooling inventory!
• Neutral body for RH, LH or
full slotting applications!
Contact your Kennametal
representative or visit
www.kennametal.com
B74

KSSM
Indexable Inserts for KSSM SP.T10T3/SP.T312
...LD2 ...GB2 ...LE
BS
W
D1
R
ε
LI
15°
S
INSERTS
metric
ISO
Catalog number
ANSI
Catalog number
Dimensions
First Choice
Alternate Choice
P
D1 LI = W S Rε BS BG
Chipload min.
fz min.
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
KC410M
KC520M
KC725M
KC915M
KC935M
SPCT10T304PPELLD2 SPCT31251PPEL8LD2 3,40 .134 10,00 .394 3,97 5/32 0,40 1/64 2,70 .106 - - 0,08 .003
SPCT10T304PPERLD2 SPCT31251PPER8LD2 3,40 .134 10,00 .394 3,97 5/32 0,40 1/64 2,70 .106 - - 0,08 .003
SPCT10T308PPELLD2 SPCT3125PPEL8LD2 3,40 .134 10,00 .394 3,97 5/32 0,80 1/32 2,70 .106 - - 0,08 .003
SPCT10T308PPERLD2 SPCT3125PPER8LD2 3,40 .134 10,00 .394 3,97 5/32 0,80 1/32 2,70 .106 - - 0,08 .003
SPCT10T312PPELLD2 SPCT31253PPEL8LD2 3,40 .134 10,00 .394 3,97 5/32 1,20 3/64 2,70 .106 - - 0,08 .003
SPCT10T312PPERLD2 SPCT31253PPER8LD2 3,40 .134 10,00 .394 3,97 5/32 1,20 3/64 2,70 .106 - - 0,08 .003
SPCT10T316ENLD2 SPCT31254ENLD2 3,40 .134 10,00 .394 3,97 5/32 1,60 1/16 2,70 .106 - - 0,08 .003
SPCT10T320ENLD2 SPCT31255ENLD2 3,40 .134 10,00 .394 3,97 5/32 2,00 5/64 2,70 .106 - - 0,08 .003
H
S
N
K
M
FACE MILLING
SPCT10T304PPFLLE SPCT31251PPFL8LE 3,40 .134 10,00 .394 3,97 5/32 0,40 1/64 2,70 .106 - - 0,08 .003
SPCT10T304PPFRLE SPCT31251PPFR8LE 3,40 .134 10,00 .394 3,97 5/32 0,40 1/64 2,70 .106 - - 0,08 .003
SPCT10T308PPFLLE SPCT3125PPFL8LE 3,40 .134 10,00 .394 3,97 5/32 0,80 1/32 2,70 .106 - - 0,08 .003
SPCT10T308PPFRLE SPCT3125PPFR8LE 3,40 .134 10,00 .394 3,97 5/32 0,80 1/32 2,70 .106 - - 0,08 .003
SPCT10T312PPFLLE SPCT31253PPFL8LE 3,40 .134 10,00 .394 3,97 5/32 1,20 3/64 2,70 .106 - - 0,08 .003
SPCT10T312PPFRLE SPCT31253PPFR8LE 3,40 .134 10,00 .394 3,97 5/32 1,20 3/64 2,70 .106 - - 0,08 .003
SPCT10T316FNLE SPCT31254FNLE 3,40 .134 10,00 .394 3,97 5/32 1,60 1/16 2,70 .106 - - 0,08 .003
SPCT10T320FNLE SPCT31255FNLE 3,40 .134 10,00 .394 3,97 5/32 2,00 5/64 2,70 .106 - - 0,08 .003
SPET10T308PPELGB2 SPET3125PPEL8GB2 3,40 .134 10,00 .394 3,97 5/32 0,80 1/32 2,70 .106 - - 0,10 .004
SPET10T308PPERGB2 SPET3125PPER8GB2 3,40 .134 10,00 .394 3,97 5/32 0,80 1/32 2,70 .106 - - 0,10 .004
SPET10T308PPSLGB2 SPET3125PPSL8GB2 3,40 .134 10,00 .394 3,97 5/32 0,80 1/32 2,70 .106 - - 0,15 .006
SPET10T308PPSRGB2 SPET3125PPSR8GB2 3,40 .134 10,00 .394 3,97 5/32 0,80 1/32 2,70 .106 - - 0,15 .006
DIE & MOLD
MILLING
END MILLING
SLOTTING / HELICAL
Order example:
1x SPCT10T304PPELLD2
10 x 100Y06RK90SP10N14K
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B75

KSSM – Slotting Cutters
Type B Shell Mount Metric, 10 mm IC Inserts
Bmax.
Bmin. - Bmax.
INSERTS
AP1
D1 D6 D
L
Body width
AP1
D1 D6 D
L
Body width
Cutter
Diameter
Nominal
Lead
Angle
Manuf.
Tolerance
100 89°59' ± 0°15'
125 89°59' ± 0°15'
160 90° 0' ± 0°15'
200 90° 1' ± 0°15'
250 90° 1' ± 0°15'
315 90° 1' ± 0°15'
FACE MILLING
metric
D1
Shell
Mount
Order
number
Half Side
Cutting
Catalog number
Right Hand
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width L Bmax.
AP1
max. Insert Kg
100 2442599 100Y06RK90SP10N14K 6 6 27 48 12,34 50 6,50 25,00 SP..10T3 1,10
125 2443444 125Y08RK90SP10N14K 8 8 32 56 12,34 50 6,50 33,00 SP..10T3 2,00
160 2443468 160Y10RK90SP10N14K 10 10 40 56 12,34 50 6,50 46,00 SP..10T3 2,70
200 2443492 200Y14RK90SP10N14K 14 14 40 75 12,34 50 6,50 63,00 SP..10T3 4,00
125 2443447 125Y08RK90SP10N16K 8 8 32 58 14,35 50 6,50 33,00 SP..10T3 2,10
160 2443471 160Y10RK90SP10N16K 10 10 40 70 14,35 50 6,50 46,00 SP..10T3 2,90
200 2443495 200Y14RK90SP10N16K 14 14 40 90 14,35 50 6,50 63,00 SP..10T3 4,30
250 2443513 250Y18RK90SP10N16K 18 18 60 130 14,35 50 6,50 88,00 SP..10T3 6,20
315 2443531 315Y20RK90SP10N16K 20 20 60 130 14,35 50 6,50 91,00 SP..10T3 8,60
END MILLING
MILLING
metric
D1
Shell
Mount
Order
number
Half Side
Cutting
Catalog number
Left Hand
Number
of
Inserts Z
Number
of
Eff. Teeth
100 2442600 100Y06LK90SP10N14K 6 6 27 48 12,34 50 6,50 25,00 SP..10T3 1,10
125 2443445 125Y08LK90SP10N14K 8 8 32 56 12,34 50 6,50 33,00 SP..10T3 2,00
160 2443469 160Y10LK90SP10N14K 10 10 40 56 12,34 50 6,50 46,00 SP..10T3 2,70
200 2443493 200Y14LK90SP10N14K 14 14 40 75 12,34 50 6,50 63,00 SP..10T3 4,00
125 2443448 125Y08LK90SP10N16K 8 8 32 58 14,35 50 6,50 33,00 SP..10T3 2,10
160 2443472 160Y10LK90SP10N16K 10 10 40 70 14,35 50 6,50 46,00 SP..10T3 2,90
200 2443496 200Y14LK90SP10N16K 14 14 40 90 14,35 50 6,50 63,00 SP..10T3 4,30
250 2443514 250Y18LK90SP10N16K 18 18 60 130 14,35 50 6,50 88,00 SP..10T3 6,20
315 2443532 315Y20LK90SP10N16K 20 20 60 130 14,35 50 6,50 91,00 SP..10T3 8,60
D
D6
Body
Width L Bmax.
AP1
max. Insert Kg
SLOTTING / HELICAL
metric
D1
Shell
Mount
Order
number
Full Side
Cutting
Catalog number
Right Hand
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width
L
Bmin.-
Bmax.
AP1
max. Insert Kg
100 2442598 100Y06NK90SP10N14K 6 3 27 48 12,34 50 14-16 24,00 SP..10T3 1,00
125 2443443 125Y08NK90SP10N14K 8 4 32 56 12,34 50 14-16 32,00 SP..10T3 2,00
160 2443467 160Y10NK90SP10N14K 10 5 40 56 12,34 50 14-16 43,00 SP..10T3 2,70
200 2443491 200Y14NK90SP10N14K 14 7 40 75 12,34 50 14-16 53,00 SP..10T3 4,00
125 2443446 125Y08NK90SP10N16K 8 4 32 58 14,35 50 16-18 32,00 SP..10T3 2,10
160 2443470 160Y10NK90SP10N16K 10 5 40 70 14,35 50 16-18 43,00 SP..10T3 2,90
200 2443494 200Y14NK90SP10N16K 14 7 40 90 14,35 50 16-18 53,00 SP..10T3 4,30
250 2443512 250Y18NK90SP10N16K 18 9 60 130 14,35 50 16-18 58,00 SP..10T3 6,20
315 2443530 315Y20NK90SP10N16K 20 10 60 130 14,35 50 16-18 91,00 SP..10T3 8,60
DIE & MOLD
metric
Spare Parts
Body Width
Insert
Cartridge Right
Cartridge Left
Clamp
Clamping
Screw
Screw
Driver
Cam Pin
Cam Pin
Wrench
12,34 SP..10T3 RK90SP1014 LK90SP1014 W14 STCM11 THW3M CP1416 MW25 MS2148 TTP9
14,35 SP..10T3 RK90SP1016 LK90SP1016 W16 STCM11 THW3M CP1416 MW25 MS2148 TTP9
Insert
Screw
Screw
Driver
Order example:
10 x 100Y06RK90SP10N14K
B76
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSSM – Slotting Cutters
Type B Shell Mount Inch, 10 mm IC Inserts
Bmax.
Bmin. - Bmax.
AP1
D1 D6 D
L
Body width
AP1
D1 D6 D
L
Body width
Cutter
Diameter
Nominal
Lead
Angle
Manuf.
Tolerance
4.0 89°59' ± 0°15'
5.0 89°59' ± 0°15'
6.0 90° 0' ± 0°15'
8.0 90° 1' ± 0°15'
10.0 90° 1' ± 0°15'
12.0 90° 1' ± 0°15'
INSERTS
inch
D1
Half Side
Cutting
Shell Mount
Order
number
Right Hand
ANSI
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width
L
AP1
Bmax. max. Insert Ibs.
4.00 2268626 KSSS400BSP10R551-630 6 6 1.00 1.88 .486 2.072 .259 .87 SP.T31.. 2.49 17100
5.00 2268632 KSSS500BSP10R551-630 8 8 1.25 2.25 .486 2.072 .259 .99 SP.T31.. 4.35 15300
6.00 2268644 KSSS600BSP10R551-630 10 10 1.50 2.25 .486 2.072 .259 1.03 SP.T31.. 6.01 14000
8.00 2268656 KSSS800BSP10R551-630 14 14 1.50 2.88 .486 2.072 .259 2.03 SP.T31.. 8.74 12100
5.00 2268638 KSSS500BSP10R630-709 8 8 1.25 2.25 .565 2.072 .259 .99 SP.T31.. 4.60 15300
6.00 2268650 KSSS600BSP10R630-709 10 10 1.50 2.25 .565 2.072 .259 1.03 SP.T31.. 6.32 14000
8.00 2268662 KSSS800BSP10R630-709 14 14 1.50 2.88 .565 2.072 .259 2.03 SP.T31.. 9.51 12100
10.00 2268668 KSSS1000BSP10R630-709 18 18 2.50 2.88 .565 2.072 .259 2.31 SP.T31.. 13.56 10800
12.00 2268674 KSSS1200BSP10R630-709 20 20 2.50 2.88 .565 2.072 .259 3.31 SP.T31.. 18.84 9900
max.
RPM
FACE MILLING
inch
D1
Half Side
Cutting
Shell Mount
Order
number
Left Hand
ANSI
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width
L
AP1
Bmax. max. Insert Ibs.
4.00 2268627 KSSS400BSP10L551-630 6 6 1.00 1.88 .486 2.072 .259 .87 SP.T31.. 2.49 17100
5.00 2268633 KSSS500BSP10L551-630 8 8 1.25 2.25 .486 2.072 .259 .99 SP.T31.. 4.35 15300
6.00 2268645 KSSS600BSP10L551-630 10 10 1.50 2.25 .486 2.072 .259 1.03 SP.T31.. 6.01 14000
8.00 2268657 KSSS800BSP10L551-630 14 14 1.50 2.88 .486 2.072 .259 2.03 SP.T31.. 8.74 12100
max.
RPM
MILLING
END MILLING
5.00 2268639 KSSS500BSP10L630-709 8 8 1.25 2.25 .565 2.072 .259 .99 SP.T31.. 4.60 15300
6.00 2268651 KSSS600BSP10L630-709 10 10 1.50 2.25 .565 2.072 .259 1.03 SP.T31.. 6.32 14000
8.00 2268663 KSSS800BSP10L630-709 14 14 1.50 2.88 .565 2.072 .259 2.03 SP.T31.. 9.51 12100
10.00 2268669 KSSS1000BSP10L630-709 18 18 2.50 2.88 .565 2.072 .259 2.31 SP.T31.. 13.56 10800
12.00 2268675 KSSS1200BSP10L630-709 20 20 2.50 2.88 .565 2.072 .259 3.31 SP.T31.. 18.84 9900
inch
D1
Full Side
Cutting
Shell Mount
Order
number
ANSI
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width
L
Bmin.- AP1
Bmax. max. Insert Ibs.
4.00 2268625 KSSS400BSP10N551-630 6 3 1.00 2.13 .486 2.072 .551-.630 .87 SP.T31.. 2.49 17100
5.00 2268631 KSSS500BSP10N551-630 8 4 1.25 2.88 .486 2.072 .551-.630 .99 SP.T31.. 4.35 15300
6.00 2268643 KSSS600BSP10N551-630 10 5 1.50 3.81 .486 2.072 .551-.630 1.03 SP.T31.. 6.01 14000
8.00 2268655 KSSS800BSP10N551-630 14 7 1.50 3.81 .486 2.072 .551-.630 2.03 SP.T31.. 8.74 12100
5.00 2268637 KSSS500BSP10N630-709 8 4 1.25 2.88 .565 2.072 .639-.709 .99 SP.T31.. 4.60 15300
6.00 2268649 KSSS600BSP10N630-709 10 5 1.50 3.81 .565 2.072 .639-.709 1.03 SP.T31.. 6.32 14000
8.00 2268661 KSSS800BSP10N630-709 14 7 1.50 3.81 .565 2.072 .639-.709 2.03 SP.T31.. 9.51 12100
10.00 2268667 KSSS1000BSP10N630-709 18 9 2.50 5.25 .565 2.072 .639-.709 2.31 SP.T31.. 13.56 10800
12.00 2268673 KSSS1200BSP10N630-709 20 10 2.50 5.25 .565 2.072 .639-.709 3.31 SP.T31.. 18.84 9900
max.
RPM
SLOTTING / HELICAL
DIE & MOLD
inch
Spare Parts
Body Width
Insert
Cartridge Right
Cartridge Left
Clamp
Clamping
Screw
Screw
Driver
Cam Pin
Cam Pin
Wrench
.486 SP.T31.. KSSC551-630R KSSC551-630L KSSW551-630 STCM11 THW3M KSSCP551-709 MW25 MS2148 TTP9
.565 SP.T31.. KSSC630-709R KSSC630-709L KSSW630-709 STCM11 THW3M KSSCP551-709 MW25 MS2148 TTP9
Insert
Screw
Screw
Driver
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B77

KSSM – Slotting Cutters
Type A Arbor Mount Metric, 10 mm IC Inserts
L
Bmax.
L
Bmin. - Bmax.
INSERTS
D
AP1
D1 D6
D
Body width
D
AP1
D1 D6
D
Body width
Cutter
Diameter
Nominal
Lead
Angle
Manuf.
Tolerance
100 89°59' ± 0°15'
125 89°59' ± 0°15'
160 90° 0' ± 0°15'
200 90° 1' ± 0°15'
250 90° 1' ± 0°15'
315 90° 1' ± 0°15'
FACE MILLING
metric
D1
Half Side Right Hand
Cutting
Arbor Mount
Order
number
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width
Bmax.
AP1
max. Insert Kg
100 2442596 100G06RK90SP10N14K 6 6 32 47 13,8 12,34 6,50 26,00 SP..10T3 0,50
125 2442602 125H08RK90SP10N14K 8 8 40 55 13,8 12,34 6,50 34,00 SP..10T3 0,90
160 2443456 160H10RK90SP10N14K 10 10 40 55 13,8 12,34 6,50 52,00 SP..10T3 1,40
200 2443480 200J14RK90SP10N14K 14 14 50 69 13,8 12,34 6,50 65,00 SP..10T3 2,50
125 2443435 125H08RK90SP10N16K 8 8 40 47 15,8 14,35 6,50 34,00 SP..10T3 1,40
160 2443459 160H10RK90SP10N16K 10 10 40 55 15,8 14,35 6,50 46,00 SP..10T3 1,60
200 2443483 200J14RK90SP10N16K 14 14 50 55 15,8 14,35 6,50 63,00 SP..10T3 2,90
250 2443504 250J18RK90SP10N16K 18 18 50 69 15,8 14,35 6,50 90,00 SP..10T3 4,90
315 2443522 315K20RK90SP10N16K 20 20 60 84 15,8 14,35 6,50 114,00 SP..10T3 7,30
L
END MILLING
MILLING
metric
D1
Half Side Left Hand
Cutting
Arbor Mount
Order
number
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width
Bmax.
AP1
max. Insert Kg
100 2442597 100G06LK90SP10N14K 6 6 32 55 13,8 12,34 6,50 34,00 SP..10T3 0,50
125 2443433 125H08LK90SP10N14K 8 8 40 55 13,8 12,34 6,50 51,50 SP..10T3 0,90
160 2443457 160H10LK90SP10N14K 10 10 40 69 13,8 12,34 6,50 64,50 SP..10T3 1,40
200 2443481 200J14LK90SP10N14K 14 14 50 69 13,8 12,34 6,50 89,50 SP..10T3 2,50
125 2443436 125H08LK90SP10N16K 8 8 40 55 15,8 14,35 6,50 34,00 SP..10T3 1,40
160 2443460 160H10LK90SP10N16K 10 10 40 55 15,8 14,35 6,50 51,50 SP..10T3 1,60
200 2443484 200J14LK90SP10N16K 14 14 50 69 15,8 14,35 6,50 64,50 SP..10T3 2,90
250 2443505 250J18LK90SP10N16K 18 18 50 69 15,8 14,35 6,50 89,50 SP..10T3 4,90
315 2443523 315K20LK90SP10N16K 20 20 60 84 15,8 14,35 6,50 114,50 SP..10T3 7,30
L
SLOTTING / HELICAL
metric
D1
Full Side
Cutting
Arbor Mount
Order
number
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
L
Body
Width
Bmin.-
Bmax.
AP1
max. Insert Kg
100 2442595 100G06NK90SP10N14K 6 3 32 48 13,8 12,34 14-16 26,00 SP..10T3 0,50
125 2442601 125H08NK90SP10N14K 8 4 40 56 13,8 12,34 14-16 34,00 SP..10T3 0,90
160 2443455 160H10NK90SP10N14K 10 5 40 56 13,8 12,34 14-16 52,00 SP..10T3 1,40
200 2443479 200J14NK90SP10N14K 14 7 50 75 13,8 12,34 14-16 65,00 SP..10T3 2,50
125 2443434 125H08NK90SP10N16K 8 4 40 58 15,8 14,35 16-18 34,00 SP..10T3 1,40
160 2443458 160H10NK90SP10N16K 10 5 40 70 15,8 14,35 16-18 46,00 SP..10T3 1,60
200 2443482 200J14NK90SP10N16K 14 7 50 90 15,8 14,35 16-18 63,00 SP..10T3 2,90
250 2443503 250J18NK90SP10N16K 18 9 50 130 15,8 14,35 16-18 90,00 SP..10T3 4,90
315 2443521 315K20NK90SP10N16K 20 10 60 130 15,8 14,35 16-18 114,00 SP..10T3 7,30
DIE & MOLD
metric
Spare Parts
Body Width
Insert
Cartridge Right
Cartridge Left
Clamp
Clamping
Screw
Screw
Driver
Cam Pin
Cam Pin
Wrench
12,34 SP..10T3 RK90SP1014 LK90SP1014 W14 STCM11* THW3M CP1416 MW25 MS2148 TTP9
14,35 SP..10T3 RK90SP1016 LK90SP1016 W16 STCM11* THW3M CP1416 MW25 MS2148 TTP9
Insert
Screw
Screw
Driver
* 100 mm diameter uses STCM32 clamping screw
Order example:
10 x 100G06RK90SP10N14K
B78
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSSM – Slotting Cutters
Type A Arbor Mount Inch, 10 mm IC Inserts
L
Bmax.
L
Bmin. - Bmax.
D
AP1
D1 D6
D
Body width
D
AP1
D1 D6
D
Body width
Cutter
Diameter
Nominal
Lead
Angle
Manuf.
Tolerance
4.0 89°59' ± 0°15'
5.0 89°59' ± 0°15'
6.0 90° 0' ± 0°15'
8.0 90° 1' ± 0°15'
10.0 90° 1' ± 0°15'
12.0 90° 1' ± 0°15'
INSERTS
inch
D1
Half Side Right Hand
Cutting
Arbor Mount
Order
number
ANSI
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width
L
AP1
Bmax. max. Insert Ibs.
4.00 2268623 KSSS400ASP10R551-630 6 6 1.25 1.88 .486 .545 .259 .99 SP.T31.. 1.17 17100
5.00 2268629 KSSS500ASP10R551-630 8 8 1.50 2.25 .486 .545 .259 1.31 SP.T31.. 1.94 15300
6.00 2268641 KSSS600ASP10R551-630 10 10 1.50 2.25 .486 .545 .259 1.81 SP.T31.. 2.97 14000
8.00 2268653 KSSS800ASP10R551-630 14 14 2.00 2.88 .486 .545 .259 2.49 SP.T31.. 5.53 12100
5.00 2268635 KSSS500ASP10R630-709 8 8 1.50 2.25 .565 .624 .259 1.31 SP.T31.. 2.27 15300
6.00 2268647 KSSS600ASP10R630-709 10 10 1.50 2.25 .565 .624 .259 1.81 SP.T31.. 3.50 14000
8.00 2268659 KSSS800ASP10R630-709 14 14 2.00 2.88 .565 .624 .259 2.49 SP.T31.. 6.48 12100
10.00 2268665 KSSS1000ASP10R630-709 18 18 2.00 2.88 .565 .624 .259 3.49 SP.T31.. 10.67 10800
12.00 2268671 KSSS1200ASP10R630-709 20 20 2.00 2.88 .565 .624 .259 4.49 SP.T31.. 15.96 9900
max.
RPM
FACE MILLING
inch
D1
Half Side Left Hand
Cutting
Arbor Mount
Order
number
ANSI
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width
L
AP1
Bmax. max. Insert Ibs
4.00 2268624 KSSS400ASP10L551-630 6 6 1.25 1.88 .486 .545 .259 .99 SP.T31.. 1.17 17100
5.00 2268630 KSSS500ASP10L551-630 8 8 1.50 2.25 .486 .545 .259 1.31 SP.T31.. 1.94 15300
6.00 2268642 KSSS600ASP10L551-630 10 10 1.50 2.25 .486 .545 .259 1.81 SP.T31.. 2.97 14000
8.00 2268654 KSSS800ASP10L551-630 14 14 2.00 2.88 .486 .545 .259 2.49 SP.T31.. 5.53 12100
max.
RPM
MILLING
END MILLING
5.00 2268636 KSSS500ASP10L630-709 8 8 1.50 2.25 .565 .624 .259 1.31 SP.T31.. 2.27 15300
6.00 2268648 KSSS600ASP10L630-709 10 10 1.50 2.25 .565 .624 .259 1.81 SP.T31.. 3.50 14000
8.00 2268660 KSSS800ASP10L630-709 14 14 2.00 2.88 .565 .624 .259 2.49 SP.T31.. 6.48 12100
10.00 2268666 KSSS1000ASP10L630-709 18 18 2.00 2.88 .565 .624 .259 3.49 SP.T31.. 10.67 10800
12.00 2268672 KSSS1200ASP10L630-709 20 20 2.00 2.88 .565 .624 .259 4.49 SP.T31.. 15.96 9900
inch
D1
Full Side
Cutting
Order
number
ANSI
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width
L
Bmin.- AP1
Bmax. max. Insert Ibs
4.00 2268052 KSSS400ASP10N551-630 6 3 1.25 1.88 .486 .545 .551-.630 .99 SP.T31.. 1.17 17100
5.00 2268628 KSSS500ASP10N551-630 8 4 1.50 2.25 .486 .545 .551-.630 1.31 SP.T31.. 1.94 15300
6.00 2268640 KSSS600ASP10N551-630 10 5 1.50 2.25 .486 .545 .551-.630 1.81 SP.T31.. 2.97 14000
8.00 2268652 KSSS800ASP10N551-630 14 7 2.00 2.88 .486 .545 .551-.630 2.49 SP.T31.. 5.53 12100
5.00 2268634 KSSS500ASP10N630-709 8 4 1.50 2.25 .565 .624 .639-.709 1.31 SP.T31.. 2.27 15300
6.00 2268646 KSSS600ASP10N630-709 10 5 1.50 2.25 .565 .624 .639-.709 1.81 SP.T31.. 3.50 14000
8.00 2268658 KSSS800ASP10N630-709 14 7 2.00 2.88 .565 .624 .639-.709 2.49 SP.T31.. 6.48 12100
10.00 2268664 KSSS1000ASP10N630-709 18 9 2.00 2.88 .565 .624 .639-.709 3.49 SP.T31.. 10.67 10800
12.00 2268670 KSSS1200ASP10N630-709 20 10 2.00 2.88 .565 .624 .639-.709 4.49 SP.T31.. 15.96 9900
max.
RPM
SLOTTING / HELICAL
DIE & MOLD
inch
Spare Parts
Body Width
Insert
Cartridge Right
Cartridge Left
Clamp
Clamping
Screw
Screw
Driver
Cam Pin
Cam Pin
Wrench
.486 SP.T31.. KSSC551-630R KSSC551-630L KSSW551-630 STCM11* THW3M KSSCP551-709 MW25 MS2148 TTP9
.565 SP.T31.. KSSC630-709R KSSC630-709L KSSW630-709 STCM11* THW3M KSSCP551-709 MW25 MS2148 TTP9
* 4.00 diameter uses STCM32 clamping screw
Insert
Screw
Screw
Driver
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B79

KSSM – Slotting Cutters
10 mm IC Inserts
INSERTS
FACE MILLING
m/min ft/min
360 1200
Cutting speed (Vc) – feet/min
320 1050
270
230
180
140
90
50
900
750
600
450
300
150
KC725M E
0 .002 .004
0,05 0,10
Steel Milling Grades
KC935M E
.006
0,15
.008
0,20
KT530M E
KC725M S
.010
0,25
Chipload (fz) – ipt
KC935M S
.012
0,30
.014
0,36
inch
mm
Coolant
speed
Vc
Starting ft/min
operating
conditions m/min
KC725M
▼ S
▼▼
KC725M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
KC935M
▼▼▼ E
▼▼▼▼
KT530M
▼▼▼ E
▼▼▼▼
600
180
750
230
700
210
1000
300
1000
300
chipload
Fz
350HB or High
Alloy content
(15-5, 17-4
Stainless, P20)
Dry preferred Wet, reduce speed by 25%
END MILLING
MILLING
SLOTTING / HELICAL
Cutting speed (Vc) – feet/min
m/min
ft/min
330 1100
300 1000
270 900
240 800
210 700
180 600
150 500
120 400
90 300
60 200
30 100
0 0
Stainless Steel Milling Grades
0 .001 .002 .003 .004
0,03 0,05 0,08 0,10
KC935M E
KC725M E
.005 .006 .007
0,13 0,15 0,18
.008
0,20
.009 .010 .011
0,23 0,25 0,28
Chipload (fz) – ipt
inch
mm
Coolant
KC725M
▼▼ E
▼▼▼
KC935M
▼▼▼ E
▼▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
500
150
800
240
chipload
Fz
Austenitic
(304, 316)
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.008 400 .007 350 .006
0,20 120 0,18 110 0,15
.005
0,15
700
210
.005
0,15
Ferritic /
Martensitic
135-330 HB
not
recommended
Ferritic /
Martensitic
330-450 HB
Dry preferred Wet, reduce speed by 25%
DIE & MOLD
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
B80
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSSM – Slotting Cutters
10 mm IC Inserts
Cutting speed (Vc) – feet/min
m/min ft/min
320 1050
270
230
180
140
90
50
0
900
750
600
450
300
150
0
0
KC520M E
KC935M E
.002
0,05
Cast Iron Milling Grades
KC915M E
.004
0,10
KC915M S
.006
0,15
KC935M S
.008
0,20
Chipload (fz) – ipt
.010
0,25
.012
0,30
inch
mm
Coolant
KC520M
▼▼ E
▼▼▼
KC935M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
KC915M
▼▼▼ S
▼▼▼▼
KC915M
▼▼▼ E
▼▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
600
180
600
180
500
150
800
240
900
270
chipload
Fz

KSSM – Slotting Cutters
Indexable Inserts for KSSM SD.T1204/SD.T431
SDCT...PDE-LD2 SDCT-EN-LD2 SDCT-PDF-LE SDCT-FNLE SDCT-PDE-GB2
BS
INSERTS
W
D1
R
ε
LI
15°
S
FACE MILLING
inch
ISO
Catalog number
ANSI
Catalog number
Dimensions
First Choice
Alternate Choice
P
D1 LI = W S Rε BS BG
Chipload min.
fz min.
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
H
S
N
K
M
KC410M
KC520M
KC725M
KC915M
KC935M
SDCT120404PDELLD2 SDCT431PDEL8LD2 4,40 .173 12,70 1/2 4,76 3/16 0,40 1/64 2,70 .106 - - 0,05 .002
SDCT120404PDERLD2 SDCT431PDER8LD2 4,40 .173 12,70 1/2 4,76 3/16 0,40 1/64 2,70 .106 - - 0,05 .002
SDCT120408PDELLD2 SDCT43PDEL8LD2 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,05 .002
SDCT120408PDERLD2 SDCT43PDER8LD2 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,05 .002
SDCT120412PDELLD2 SDCT433PDEL8LD2 4,40 .173 12,70 1/2 4,76 3/16 1,20 3/64 2,70 .106 - - 0,05 .002
SDCT120412PDERLD2 SDCT433PDER8LD2 4,40 .173 12,70 1/2 4,76 3/16 1,20 3/64 2,70 .106 - - 0,05 .002
END MILLING
MILLING
SDCT120416ENLD2 SDCT434ENLD2 4,40 .173 12,70 1/2 4,76 3/16 1,60 1/16 - - - - 0,05 .002
SDCT120420ENLD2 SDCT435ENLD2 4,40 .173 12,70 1/2 4,76 3/16 2,00 5/64 - - - - 0,05 .002
SDCT120424ENLD2 SDCT436ENLD2 4,40 .173 12,70 1/2 4,76 3/16 2,40 3/32 - - - - 0,05 .002
SDCT120432ENLD2 SDCT438ENLD2 4,40 .173 12,70 1/2 4,76 3/16 3,20 1/8 - - - - 0,05 .002
SDCT120404PDFLLE SDCT431PDFL8LE 4,40 .173 12,70 1/2 4,76 3/16 0,40 1/64 2,70 .106 - - 0,05 .002
SDCT120404PDFRLE SDCT431PDFR8LE 4,40 .173 12,70 1/2 4,76 3/16 0,40 1/64 2,70 .106 - - 0,05 .002
SDCT120408PDFLLE SDCT43PDFL8LE 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,05 .002
SDCT120408PDFRLE SDCT43PDFR8LE 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,05 .002
SDCT120412PDFLLE SDCT433PDFL8LE 4,40 .173 12,70 1/2 4,76 3/16 1,20 3/64 2,70 .106 - - 0,05 .002
SDCT120412PDFRLE SDCT433PDFR8LE 4,40 .173 12,70 1/2 4,76 3/16 1,20 3/64 2,70 .106 - - 0,05 .002
SDCT120416FNLE SDCT434FNLE 4,40 .173 12,70 1/2 4,76 3/16 1,60 1/16 2,70 .106 - - 0,05 .002
SDCT120420FNLE SDCT435FNLE 4,40 .173 12,70 1/2 4,76 3/16 2,00 5/64 2,70 .106 - - 0,05 .002
SDCT120424FNLE SDCT436FNLE 4,40 .173 12,70 1/2 4,76 3/16 2,40 3/32 2,70 .106 - - 0,05 .002
SDCT120432FNLE SDCT438FNLE 4,40 .173 12,70 1/2 4,76 3/16 3,20 1/8 2,70 .106 - - 0,05 .002
SDET120408PDELGB2 SDET43PDEL8GB2 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,08 .003
SDET120408PDERGB2 SDET43PDER8GB2 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,08 .003
SDET120408PDSRGB2 SDET43PDSR8GB2 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,08 .003
SDET120412PDELGB2 SDET433PDEL8GB2 4,40 .173 12,70 1/2 4,76 3/16 1,20 3/64 2,70 .106 - - 0,08 .003
SDET120412PDERGB2 SDET433PDER8GB2 4,40 .173 12,70 1/2 4,76 3/16 1,20 3/64 2,70 .106 - - 0,08 .003
DIE & MOLD
SLOTTING / HELICAL
Order example:
1x KSSS400ASP10N625
10 x SDCT431PDEL8LD2
B82
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSSM – Slotting Cutters
KSSM Fixed Width Slotting, 10 mm and 12 mms IC Inserts
NEW
L
Bmax.
L
D
AP1
D1 D6
D
AP1
D1
D6
D6
Bmax. Bmax.
L
Cutter
Diameter
Nominal
Lead
Angle
Manuf.
Tolerance
4.0 89°59' ± 0°15'
5.0 89°59' ± 0°15'
6.0 90° 0' ± 0°15'
8.0 90° 1' ± 0°15'
10.0 90° 1' ± 0°15'
12.0 90° 1' ± 0°15'
INSERTS
inch
KSSM 10 mm IC Arbor Mount
D1
Order
Number
ANSI
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D6 D
L Bmax. AP1 Insert
4.00 2629768 KSSS400ASP10N625 10 5 1.880 1.250 .542 .625 1.040 SP..10T3 2.000 17100
4.00 2629769 KSSS400ASP10L625 10 10 1.880 1.250 .625 .259 1.040 SP..10T3 2.000 17100
4.00 2629770 KSSS400ASP10R625 10 10 1.880 1.250 .625 .259 1.040 SP..10T3 2.000 17100
5.00 2629794 KSSS500ASP10N625 12 6 2.250 1.500 .542 .625 1.355 SP..10T3 2.500 15300
5.00 2629772 KSSS500ASP10L625 11 11 2.250 1.500 .625 .259 1.355 SP..10T3 2.500 15300
5.00 2629773 KSSS500ASP10R625 11 11 2.250 1.500 .625 .259 1.355 SP..10T3 2.500 15300
6.00 2629774 KSSS600ASP10N625 12 6 2.250 1.500 .542 .625 1.855 SP..10T3 3.700 14000
6.00 2629775 KSSS600ASP10L625 11 11 2.250 1.500 .625 .259 1.855 SP..10T3 3.700 14000
6.00 2629776 KSSS600ASP10R625 11 11 2.250 1.500 .625 .259 1.855 SP..10T3 3.700 14000
8.00 2629777 KSSS800ASP10N625 14 7 2.880 2.000 .542 .625 2.540 SP..10T3 6.900 12100
8.00 2629778 KSSS800ASP10L625 13 13 2.880 2.000 .625 .259 2.540 SP..10T3 6.900 12100
8.00 2629779 KSSS800ASP10R625 13 13 2.880 2.000 .625 .259 2.540 SP..10T3 6.900 12100
Ibs.
max.
RPM
FACE MILLING
inch
KSSM 12 mm IC Arbor Mount
D1
Order
Number
ANSI
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D6 D
L Bmax. AP1 Insert
6.00 2618967 KSSS600ASD43N750 14 7 2.250 1.500 .670 .750 1.855 SDET.1204 3.700 9400
6.00 2629784 KSSS600ASD43L750 12 12 2.250 1.500 .750 .361 1.855 SDET.1204 3.700 9400
6.00 2618969 KSSS600ASD43R750 12 12 2.250 1.500 .750 .361 1.855 SDET.1204 3.700 9400
8.00 2629785 KSSS800ASD43N750 18 9 2.880 2.000 .670 .750 2.540 SDET.1204 6.900 8150
8.00 2629786 KSSS800ASD43L750 14 14 2.880 2.000 .750 .361 2.540 SDET.1204 6.900 8150
8.00 2629787 KSSS800ASD43R750 14 14 2.880 2.000 .750 .361 2.540 SDET.1204 6.900 8150
10.00 2629788 KSSS1000ASD43N750 22 11 2.880 2.000 .670 .750 3.540 SDET.1204 11.500 7250
10.00 2629789 KSSS1000ASD43L750 16 16 2.880 2.000 .750 .361 3.540 SDET.1204 11.500 7250
10.00 2629790 KSSS1000ASD43R750 16 16 2.880 2.000 .750 .361 3.540 SDET.1204 11.500 7250
Ibs.
max.
RPM
MILLING
END MILLING
inch
KSSM 10 mm IC Shell Mount
D1
Order
Number
ANSI
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D6 D
L Bmax. AP1 Insert
4.00 2629780 KSSS400BSP10N625 10 5 2.310 1.000 1.500 .625 .880 SP..10T3 2.500 17100
5.00 2629781 KSSS500BSP10N625 12 6 2.880 1.250 1.500 .625 1.010 SP..10T3 4.400 15300
6.00 2629782 KSSS600BSP10N625 14 7 3.810 1.500 2.000 .625 1.050 SP..10T3 6.000 14000
8.00 2629783 KSSS800BSP10N625 18 9 3.810 1.500 2.000 .625 2.050 SP..10T3 8.700 12100
Ibs.
max.
RPM
SLOTTING / HELICAL
inch
KSSM 12 mm IC Shell Mount
D1
Order
Number
ANSI
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D6 D
L Bmax. AP1 Insert
6.00 2629791 KSSS600BSD43N750 14 7 3.810 1.500 2 .750 1.030 SD.T1204 6.300 9400
8.00 2629792 KSSS800BSD43N750 18 9 3.810 1.500 2 .750 2.020 SD.T1204 9.800 8150
10.00 2629793 KSSS1000BSD43N750 22 11 5.250 2.500 2 .750 2.300 SD.T1204 14.100 7250
Ibs.
max.
RPM
DIE & MOLD
inch
Number of Slotters Needed
Slot Width Range Nominal Width KSS***ASP10N625 KSS***ASD43N750
.612 to .626 .619 1 -
.737 to .751 .744 - 1
1.153 to 1.169 1.161 2 -
1.402 to 1.418 1.410 - plus 2
1.730 to 1.754 1.742 3 -
2.103 to 2.127 2.115 - 3
2.306 to 2.338 2.322 4 -
2.804 to 2.836 2.820 - 4
inch
Spare Parts
Insert
Clamping
Screw Wrench
SP..10T3 MS2148 TTP9
SD.T1204 MS2077 TTP15
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B83

KSSM – Slotting Cutters
Type B Shell Mount Metric, 12 mm Inserts
Bmax.
Bmin. - Bmax.
INSERTS
AP1
D1 D6 D
L
Body width
AP1
D1 D6 D
L
Body width
Cutter
Diameter
Nominal
Lead
Angle
Manuf.
Tolerance
125 89°59' ± 0°15'
160 90° 0' ± 0°15'
200 90° 1' ± 0°15'
250 90° 1' ± 0°15'
315 90° 1' ± 0°15'
metric
Shell
Mount
Half Side
Cutting
Right Hand
FACE MILLING
D1
Order
number
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width L Bmax.
AP1
max. Insert Kg
125 2443450 125Y08RK90SD12N18K 8 8 32 58 16,00 50 9 31,00 SDET1204... 2,10
160 2443474 160Y10RK90SD12N18K 10 10 40 70 16,00 50 9 43,00 SDET1204... 2,80
200 2443498 200Y14RK90SD12N18K 14 14 40 90 16,00 50 9 53,00 SDET1204... 4,40
250 2443516 250Y16RK90SD12N18K 16 16 60 130 16,00 50 9 58,00 SDET1204... 6,40
315 2443537 315Y18RK90SD12N18K 18 18 60 130 16,00 50 9 90,00 SDET1204... 9,00
125 2443453 125Y08RK90SD12N20K 8 8 32 58 18,50 50 9 31,00 SDET1204... 2,20
160 2443477 160Y10RK90SD12N20K 10 10 40 70 18,50 50 9 43,00 SDET1204... 3,00
200 2443501 200Y14RK90SD12N20K 14 14 40 90 18,50 50 9 53,00 SDET1204... 4,80
250 2443519 250Y16RK90SD12N20K 16 16 60 130 18,50 50 9 58,00 SDET1204... 7,00
315 2443534 315Y18RK90SD12N20K 18 18 60 130 18,50 50 9 90,00 SDET1204... 10,10
metric
Shell
Mount
Half Side
Cutting
Left Hand
DIE & MOLD
SLOTTING / HELICAL
END MILLING
MILLING
D1
Order
number
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width L Bmax.
AP1
max. Insert Kg
125 2443451 125Y08LK90SD12N18K 8 8 32 58 16,00 50 9 31,00 SDET1204... 2,10
160 2443475 160Y10LK90SD12N18K 10 10 40 70 16,00 50 9 43,00 SDET1204... 2,80
200 2443499 200Y14LK90SD12N18K 14 14 40 90 16,00 50 9 53,00 SDET1204... 4,40
250 2443517 250Y16LK90SD12N18K 16 16 60 130 16,00 50 9 58,00 SDET1204... 6,40
315 2443538 315Y18LK90SD12N18K 18 18 60 130 16,00 50 9 90,00 SDET1204... 9,00
125 2443454 125Y08LK90SD12N20K 8 8 32 58 18,50 50 9 31,00 SDET1204... 2,20
160 2443478 160Y10LK90SD12N20K 10 10 40 70 18,50 50 9 43,00 SDET1204... 3,00
200 2443502 200Y14LK90SD12N20K 14 14 40 90 18,50 50 9 53,00 SDET1204... 4,80
250 2443520 250Y16LK90SD12N20K 16 16 60 130 18,50 50 9 58,00 SDET1204... 7,00
315 2443535 315Y18LK90SD12N20K 18 18 60 130 18,50 50 9 90,00 SDET1204... 10,10
metric
D1
Shell
Mount
Order
number
Full Side
Cutting
Catalog number
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width
L
Bmin.-
Bmax.
AP1
max. Insert Kg
125 2443449 125Y08NK90SD12N18K 8 4 32 58 16,00 50 18,00-20,60 34,00 SDET1204... 1,10
160 2443473 160Y10NK90SD12N18K 10 5 40 70 16,00 50 18,00-20,60 51,50 SDET1204... 1,60
200 2443497 200Y14NK90SD12N18K 14 7 40 90 16,00 50 18,00-20,60 64,50 SDET1204... 3,10
250 2443515 250Y16NK90SD12N18K 16 8 60 130 16,00 50 18,00-20,60 89,50 SDET1204... 5,20
315 2443536 315Y18NK90SD12N18K 18 9 60 130 16,00 50 18,00-20,60 114,50 SDET1204... 7,90
125 2443452 125Y08NK90SD12N20K 8 4 32 58 18,50 50 20,60-23,30 34,00 SDET1204... 1,20
160 2443476 160Y10NK90SD12N20K 10 5 40 70 18,50 50 20,60-23,30 51,50 SDET1204... 1,90
200 2443500 200Y14NK90SD12N20K 14 7 40 90 18,50 50 20,60-23,30 64,50 SDET1204... 3,60
250 2443518 250Y16NK90SD12N20K 16 8 60 130 18,50 50 20,60-23,30 89,50 SDET1204... 6,00
315 2443533 315Y18NK90SD12N20K 18 9 60 130 18,50 50 20,60-23,30 114,50 SDET1204... 9,20
metric
Spare Parts
Body Width
Insert
Cartridge Right
Cartridge Left
Clamp
Clamping
Screw
Screw
Driver
Cam Pin
Cam Pin
Wrench
16,00 SDET1204... RK90SD1218 LK90SD1218 W18 STCM11 THW3M CP1820 MW3 MS2077 TTP15
18,50 SDET1204... RK90SD1220 LK90SD1220 W20 STCM11 THW3M CP1820 MW3 MS2077 TTP15
Insert
Screw
Screw
Driver
Order example:
10 x 125Y08RK90SD12N18K
B84
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSSM – Slotting Cutters
Type B Shell Mount, 1/2'' IC Inserts
Bmax.
Bmin. - Bmax.
AP1
D1 D6 D
L
Body width
AP1
D1 D6 D
L
Body width
Cutter
Diameter
Nominal
Lead
Angle
Manuf
Tolerance
5.0 89°59' ± 0°15'
6.0 90° 0' ± 0°15'
8.0 90° 1' ± 0°15'
10.0 90° 1' ± 0°15'
12.0 90° 1' ± 0°15'
INSERTS
inch
D1
Shell
Mount
Order
number
Half Side
Cutting
ISO
Catalog number
Right Hand
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width
L
AP1
Bmax. max. Insert Ibs.
5.00 2268680 KSSS500BSD43R709-813 8 8 1.25 2.88 .627 2.093 .361 .99 SD.T43.. 4.55 10300
6.00 2268692 KSSS600BSD43R709-813 10 10 1.50 3.81 .627 2.093 .361 1.03 SD.T43.. 6.26 9400
8.00 2268704 KSSS800BSD43R709-813 14 14 1.50 3.81 .627 2.093 .361 2.03 SD.T43.. 9.72 8150
10.00 2268716 KSSS1000BSD43R709-813 16 16 2.50 5.25 .627 2.093 .361 2.31 SD.T43.. 14.04 7250
12.00 2268728 KSSS1200BSD43R709-813 18 18 2.50 5.25 .627 2.093 .361 3.31 SD.T43.. 19.83 6650
5.00 2268686 KSSS500BSD43R813-917 8 8 1.25 2.25 .731 2.093 .361 .99 SD.T43.. 4.80 10300
6.00 2268698 KSSS600BSD43R813-917 10 10 1.50 2.25 .731 2.093 .361 1.03 SD.T43.. 6.58 9400
8.00 2268710 KSSS800BSD43R813-917 14 14 1.50 2.88 .731 2.093 .361 2.03 SD.T43.. 10.62 8150
10.00 2268722 KSSS1000BSD43R813-917 16 16 2.50 2.88 .731 2.093 .361 2.31 SD.T43.. 15.42 7250
12.00 2268734 KSSS1200BSD43R813-917 18 18 2.50 2.88 .731 2.093 .361 3.31 SD.T43.. 21.19 6650
max.
RPM
FACE MILLING
inch
D1
D1
Shell
Mount
Order
number
Order
number
ISO
Catalog number
ISO
Catalog number
Number
of
Inserts Z
Number
of
Inserts Z
Number
of
Eff. Teeth
Number
of
Eff. Teeth
D
D
D6
D6
Body
Width
Body
Width
L
L
AP1
Bmax. max. Insert Ibs.
5.00 2268681 KSSS500BSD43L709-813 8 8 1.25 2.88 .627 2.093 .361 .99 SD.T43.. 4.55 10300
6.00 2268693 KSSS600BSD43L709-813 10 10 1.50 3.81 .627 2.093 .361 1.03 SD.T43.. 6.26 9400
8.00 2268705 KSSS800BSD43L709-813 14 14 1.50 3.81 .627 2.093 .361 2.03 SD.T43.. 9.72 8150
10.00 2268717 KSSS1000BSD43L709-813 16 16 2.50 5.25 .627 2.093 .361 2.31 SD.T43.. 14.04 7250
12.00 2268729 KSSS1200BSD43L709-813 18 18 2.50 5.25 .627 2.093 .361 3.31 SD.T43.. 19.83 6650
5.00 2268687 KSSS500BSD43L813-917 8 8 1.25 2.25 .731 2.093 .361 .99 SD.T43.. 4.80 10300
6.00 2268699 KSSS600BSD43L813-917 10 10 1.50 2.25 .731 2.093 .361 1.03 SD.T43.. 6.58 9400
8.00 2268711 KSSS800BSD43L813-917 14 14 1.50 2.88 .731 2.093 .361 2.03 SD.T43.. 10.62 8150
10.00 2268723 KSSS1000BSD43L813-917 16 16 2.50 2.88 .731 2.093 .361 2.31 SD.T43.. 15.42 7250
12.00 2268735 KSSS1200BSD43L813-917 18 18 2.50 2.88 .731 2.093 .361 3.31 SD.T43.. 21.19 6650
inch
Shell
Mount
Half Side
Cutting
Full Side
Cutting
Left Hand
Bmin.- AP1
Bmax. max. Insert Ibs.
5.00 2268679 KSSS500BSD43N709-813 8 4 1.25 2.88 .627 2.093 .709-.813 .99 SD.T43.. 4.55 10300
6.00 2268691 KSSS600BSD43N709-813 10 5 1.50 3.81 .627 2.093 .709-.813 1.03 SD.T43.. 6.26 9400
8.00 2268703 KSSS800BSD43N709-813 14 7 1.50 3.81 .627 2.093 .709-.813 2.03 SD.T43.. 9.72 8150
10.00 2268715 KSSS1000BSD43N709-813 16 8 2.50 5.25 .627 2.093 .709-.813 2.31 SD.T43.. 14.04 7250
12.00 2268727 KSSS1200BSD43N709-813 18 9 2.50 5.25 .627 2.093 .709-.813 3.31 SD.T43.. 19.83 6650
5.00 2268685 KSSS500BSD43N813-917 8 4 1.25 2.25 .731 2.093 .813-.917 .99 SD.T43.. 4.80 10300
6.00 2268697 KSSS600BSD43N813-917 10 5 1.50 2.25 .731 2.093 .813-.917 1.03 SD.T43.. 6.58 9400
8.00 2268709 KSSS800BSD43N813-917 14 7 1.50 2.88 .731 2.093 .813-.917 2.03 SD.T43.. 10.62 8150
10.00 2268721 KSSS1000BSD43N813-917 16 8 2.50 2.88 .731 2.093 .813-.917 2.31 SD.T43.. 15.42 7250
12.00 2268733 KSSS1200BSD43N813-917 18 9 2.50 2.88 .731 2.093 .813-.917 3.31 SD.T43.. 21.19 6650
max.
RPM
max.
RPM
MILLING
DIE & MOLD
SLOTTING / HELICAL
END MILLING
inch
Spare Parts
Body Width
Insert
Cartridge Right
Cartridge Left
Clamp
Clamping
Screw
Screw
Driver
Cam Pin
Cam Pin
Wrench
.627 SD.T43.. KSSC709-813R KSSC709-813L KSSW709-813 STCM11 THW3M KSSCP709-917 MW3 MS2077 TTP15
.731 SD.T43.. KSSC813-917R KSSC813-917L KSSW813-917 STCM11 THW3M KSSCP709-917 MW3 MS2077 TTP15
Insert
Screw
Screw
Driver
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B85

KSSM – Slotting Cutters
Type A Arbor Mount, Metric 12 mm Insert
L
Bmax.
L
Bmin. - Bmax.
INSERTS
D
AP1
D1 D6
D
Body width
D
AP1
D1 D6
D
Body width
Cutter
Diameter
Nominal
Lead
Angle
Manuf.
Tolerance
125 89°59' ± 0°15'
160 90° 0' ± 0°15'
200 90° 1' ± 0°15'
250 90° 1' ± 0°15'
315 90° 1' ± 0°15'
metric
Half Side
Cutting
Right Hand
FACE MILLING
D1
Order
number
Catalog number
Number Number
of
of
Inserts Z Eff. Teeth
D
D6
Body
Width
Bmax.
AP1
max. Insert Kg
125 2443438 125H08RK90SD12N18K 8 8 40 55 16,00 9 34,00 SDET1204... -
160 2443462 160H10RK90SD12N18K 10 10 40 55 16,00 9 51,50 SDET1204... -
200 2443486 200J14RK90SD12N18K 14 14 50 69 16,00 9 64,50 SDET1204... -
250 2443507 250J16RK90SD12N18K 16 16 50 69 16,00 9 89,50 SDET1204... -
315 2443525 315K18RK90SD12N18K 18 18 60 84 16,00 9 114,50 SDET1204... -
125 2443441 125H08RK90SD12N20K 8 8 40 55 18,50 9 34,00 SDET1204... -
160 2443465 160H10RK90SD12N20K 10 10 40 55 18,50 9 51,50 SDET1204... -
200 2443489 200J14RK90SD12N20K 14 14 50 69 18,50 9 64,50 SDET1204... -
250 2443510 250J16RK90SD12N20K 16 16 50 69 18,50 9 89,50 SDET1204... -
315 2443528 315K18RK90SD12N20K 18 18 60 84 18,50 9 114,50 SDET1204... -
END MILLING
MILLING
metric
D1
Half Side
Cutting
Order
number
Catalog number
Left Hand
Number Number
of
of
Inserts Z Eff. Teeth
D
D6
Body
Width
Bmax.
AP1
max. Insert Kg
125 2443439 125H08LK90SD12N18K 8 8 40 55 16,00 9 34,00 SDET1204... -
160 2443463 160H10LK90SD12N18K 10 10 40 55 16,00 9 51,50 SDET1204... -
200 2443487 200J14LK90SD12N18K 14 14 50 69 16,00 9 64,50 SDET1204... -
250 2443508 250J16LK90SD12N18K 16 16 50 69 16,00 9 89,50 SDET1204... -
315 2443526 315K18LK90SD12N18K 18 18 60 84 16,00 9 114,50 SDET1204... -
SLOTTING / HELICAL
DIE & MOLD
125 2443442 125H08LK90SD12N20K 8 8 40 55 18,50 9 34,00 SDET1204... -
160 2443466 160H10LK90SD12N20K 10 10 40 55 18,50 9 51,50 SDET1204... -
200 2443490 200J14LK90SD12N20K 14 14 50 69 18,50 9 64,50 SDET1204... -
250 2443511 250J16LK90SD12N20K 16 16 50 69 18,50 9 89,50 SDET1204... -
315 2443529 315K18LK90SD12N20K 18 18 60 84 18,50 9 114,50 SDET1204... -
metric
D1
Full Side
Cutting
Order
number
Catalog number
Number Number
of
of
Inserts Z Eff. Teeth
D
D6
Body
Width
Bmin.-
Bmax.
AP1
max. Insert Kg
125 2443437 125H08NK90SD12N18K 8 4 40 55 16,00 18,00-20,60 34,00 SDET1204... 1,10
160 2443461 160H10NK90SD12N18K 10 5 40 55 16,00 18,00-20,60 51,50 SDET1204... 1,60
200 2443485 200J14NK90SD12N18K 14 7 50 69 16,00 18,00-20,60 64,50 SDET1204... 3,10
250 2443506 250J16NK90SD12N18K 16 8 50 69 16,00 18,00-20,60 89,50 SDET1204... 5,20
315 2443524 315K18NK90SD12N18K 18 9 60 84 16,00 18,00-20,60 114,50 SDET1204... 7,90
125 2443440 125H08NK90SD12N20K 8 4 40 55 18,50 20,60-23,30 34,00 SDET1204... 1,20
160 2443464 160H10NK90SD12N20K 10 5 40 55 18,50 20,60-23,30 51,50 SDET1204... 1,90
200 2443488 200J14NK90SD12N20K 14 7 50 69 18,50 20,60-23,30 64,50 SDET1204... 3,60
250 2443509 250J16NK90SD12N20K 16 8 50 69 18,50 20,60-23,30 89,50 SDET1204... 6,00
315 2443527 315K18NK90SD12N20K 18 9 60 84 18,50 20,60-23,30 114,50 SDET1204... 9,20
metric
Spare Parts
Body Width
Insert
Cartridge Right
Cartridge Left
Clamp
Clamping
Screw
Screw
Driver
Cam Pin
Cam Pin
Wrench
16,00 SDET1204... RK90SD1218 LK90SD1218 W18 STCM11 THW3M CP1820 MW3 MS2077 TTP15
18,50 SDET1204... RK90SD1220 LK90SD1220 W20 STCM11 THW3M CP1820 MW3 MS2077 TTP15
Insert
Screw
Screw
Driver
Order example:
10 x 125H08RK90SD12N18K
B86
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSSM – Slotting Cutters
Type A Arbor Mount, 1/2'' IC Inserts
L
Bmax.
L
Bmin. - Bmax.
D
AP1
D1 D6
D
Body width
D
AP1
D1 D6
D
Body width
Cutter
Diameter
Nominal
Lead
Angle
Manuf.
Tolerance
4.0 89°59' ± 0°15'
5.0 90° 0' ± 0°15'
6.0 90° 1' ± 0°15'
8.0 90° 1' ± 0°15'
10.0 90° 1' ± 0°15'
INSERTS
inch
D1
Shell
Mount
Order
number
Half Side
Cutting
ISO
Catalog number
Right Hand
Number
of
Inserts Z
Number
of
Eff. Teeth
D
D6
Body
Width
L
Key
Size
AP1
Bmax. max. Insert Ibs.
5.00 2268677 KSSS500ASD43R709-813 8 8 1.25 2.25 .627 .716 3/8 .361 1.31 SD.T43.. 2.33 10300
6.00 2268689 KSSS600ASD43R709-813 10 10 1.50 2.25 .627 .716 3/8 .361 1.81 SD.T43.. 3.62 9400
8.00 2268701 KSSS800ASD43R709-813 14 14 1.50 2.88 .627 .716 3/8 .361 2.49 SD.T43.. 6.85 8150
10.00 2268713 KSSS1000ASD43R709-813 16 16 2.50 2.88 .627 .716 3/8 .361 3.49 SD.T43.. 11.51 7250
12.00 2268725 KSSS1200ASD43R709-813 18 18 2.50 2.88 .627 .716 3/8 .361 4.49 SD.T43.. 17.30 6650
5.00 2268683 KSSS500ASD43R813-917 8 8 1.25 2.25 .731 .820 3/8 .361 1.31 SD.T43.. 2.72 10300
6.00 2268695 KSSS600ASD43R813-917 10 10 1.50 2.25 .731 .820 3/8 .361 1.81 SD.T43.. 4.23 9400
8.00 2268707 KSSS800ASD43R813-917 14 14 1.50 2.88 .731 .820 3/8 .361 2.49 SD.T43.. 7.99 8150
10.00 2268719 KSSS1000ASD43R813-917 16 16 2.50 2.88 .731 .820 3/8 .361 3.49 SD.T43.. 13.16 7250
12.00 2268731 KSSS1200ASD43R813-917 18 18 2.50 2.88 .731 .820 3/8 .361 4.49 SD.T43.. 20.20 6650
max.
RPM
FACE MILLING
inch
D1
D1
Shell
Mount
Order
number
Order
number
ISO
Catalog number
ISO
Catalog number
Number
of
Inserts Z
Number
of
Inserts Z
Number
of
Eff. Teeth
Number
of
Eff. Teeth
D
D
D6
D6
Body
Width
Body
Width
L
L
Key
Size
Key
Size
AP1
Bmax. max. Insert Ibs.
5.00 2268678 KSSS500ASD43L709-813 8 8 1.25 2.25 .627 .716 3/8 .361 1.31 SD.T43.. 2.33 10300
6.00 2268690 KSSS600ASD43L709-813 10 10 1.50 2.25 .627 .716 3/8 .361 1.81 SD.T43.. 3.62 9400
8.00 2268702 KSSS800ASD43L709-813 14 14 1.50 2.88 .627 .716 3/8 .361 2.49 SD.T43.. 6.85 8150
10.00 2268714 KSSS1000ASD43L709-813 16 16 2.50 2.88 .627 .716 3/8 .361 3.49 SD.T43.. 11.51 7250
12.00 2268726 KSSS1200ASD43L709-813 18 18 2.50 2.88 .627 .716 3/8 .361 4.49 SD.T43.. 17.30 6650
5.00 2268684 KSSS500ASD43L813-917 8 8 1.25 2.25 .731 .820 3/8 .361 1.31 SD.T43.. 2.72 10300
6.00 2268696 KSSS600ASD43L813-917 10 10 1.50 2.25 .731 .820 3/8 .361 1.81 SD.T43.. 4.23 9400
8.00 2268708 KSSS800ASD43L813-917 14 14 1.50 2.88 .731 .820 3/8 .361 2.49 SD.T43.. 7.99 8150
10.00 2268720 KSSS1000ASD43L813-917 16 16 2.50 2.88 .731 .820 3/8 .361 3.49 SD.T43.. 13.16 7250
12.00 2268732 KSSS1200ASD43L813-917 18 18 2.50 2.88 .731 .820 3/8 .361 4.49 SD.T43.. 20.20 6650
inch
Shell
Mount
Half Side
Cutting
Full Side
Cutting
Left Hand
Bmin.- AP1
Bmax. max. Insert Ibs.
5.00 2268679 KSSS500ASD43N709-813 8 4 1.25 2.25 .627 .716 3/8 .709-.813 1.31 SD.T43.. 2.33 10300
6.00 2268691 KSSS600ASD43N709-813 10 5 1.50 2.25 .627 .716 3/8 .709-.813 1.81 SD.T43.. 3.62 9400
8.00 2268703 KSSS800ASD43N709-813 14 7 1.50 2.88 .627 .716 3/8 .709-.813 2.49 SD.T43.. 6.85 8150
10.00 2268715 KSSS1000ASD43N709-813 16 8 2.50 2.88 .627 .716 3/8 .709-.813 3.49 SD.T43.. 11.51 7250
12.00 2268727 KSSS1200ASD43N709-813 18 9 2.50 2.88 .627 .716 3/8 .709-.813 4.49 SD.T43.. 17.30 6650
5.00 2268685 KSSS500BSD43N813-917 8 4 1.25 2.25 .731 .820 3/8 .813-.917 1.31 SD.T43.. 2.72 10300
6.00 2268697 KSSS600BSD43N813-917 10 5 1.50 2.25 .731 .820 3/8 .813-.917 1.81 SD.T43.. 4.23 9400
8.00 2268709 KSSS800BSD43N813-917 14 7 1.50 2.88 .731 .820 3/8 .813-.917 2.49 SD.T43.. 7.99 8150
10.00 2268721 KSSS1000BSD43N813-917 16 8 2.50 2.88 .731 .820 3/8 .813-.917 3.49 SD.T43.. 13.16 7250
12.00 2268733 KSSS1200BSD43N813-917 18 9 2.50 2.88 .731 .820 3/8 .813-.917 4.49 SD.T43.. 20.20 6650
max.
RPM
max.
RPM
MILLING
DIE & MOLD
SLOTTING / HELICAL
END MILLING
inch
Spare Parts
Body Width
Insert
Cartridge Right
Cartridge Left
Clamp
Clamping
Screw
Screw
Driver
Cam Pin
Cam Pin
Wrench
.627 SD.T43.. KSSC709-813R KSSC709-813L KSSW709-813 STCM11 THW3M KSSCP709-917 MW3 MS2077 TTP15
.731 SD.T43.. KSSC813-917R KSSC813-917L KSSW813-917 STCM11 THW3M KSSCP709-917 MW3 MS2077 TTP15
Insert
Screw
Screw
Driver
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B87

KSSM – Slotting Cutters
12 mm, 1/2'' IC Insert
INSERTS
FACE MILLING
m/min ft/min
360 1200
Cutting speed (Vc) – feet/min
320 1050
270
230
180
140
90
50
900
750
600
450
300
150
KT
530M E
0 .002 .004
0,05 0,10
Steel Milling Grades
KC935M E
KC
725M E
.006
0,15
.008
0,20
KC725M S
.010
0,25
.012
0,30
Chipload (fz) – ipt
KC935M S
.014
0,36
.016
0,41
inch
mm
speed
Vc
Starting ft/min
Coolant operating
conditions m/min
KC725M
▼ S
▼▼
KC725M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
KC935M
▼▼▼ E
▼▼▼▼
KT530M
▼▼▼ E
▼▼▼▼
650
200
750
230
750
230
1000
300
1000
300
chipload
Fz
350HB or High
Alloy content
(15-5, 17-4
stainless, P20)
Dry preferred Wet, reduce speed by 25%
END MILLING
MILLING
SLOTTING / HELICAL
Cutting speed (Vc) – feet/min
m/min
ft/min
330 1100
300 1000
270 900
240 800
210 700
180 600
150 500
120 400
90 300
60 200
30 100
0 0
Stainless Steel Milling Grades
KC935M E
KC725M E
0 .001 .002 .003 .004 .005 .006 .007 .008 .009 .010 .011 .012 inch
0,03 0,05 0,08 0,10 0,13 0,15 0,18 0,20 0,23 0,25 0,28 0,28 mm
Chipload (fz) – ipt
Coolant
KC725M
▼▼ E
▼▼▼
KC935M
▼▼▼ E
▼▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
500
150
800
240
chipload
Fz
Austenitic
(304, 316)
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.008 400 .009 350 .007
0,20 120 0,23 110 0,18
.006
0,15
700
210
.008
0,20
Ferritic /
Martensitic
135-330 HB
not
recommended
Ferritic /
Martensitic
330-450 HB
Dry preferred Wet, reduce speed by 25%
DIE & MOLD
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
B88
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSSM – Slotting Cutters
12 mm 1/2'' IC Insert
Cutting speed (Vc) – feet/min
m/min
ft/min
1350 4500
1050 3000
450 1500
360 1200
320 1050
270
230
180
140
90
50
900
750
600
450
300
150
KC520M E
KC935M E
0 .002 .004
0,05 0,10
Cast Iron Milling Grades
KC915M E
KC
522M E
KY3500 E
.006
0,15
.008
0,20
.010
0,25
Chipload (fz) – ipt
KC915M S
KC935M S
.012
0,30
.014
0,36
.016
0,41
inch
mm
Coolant
KC522M
▼▼ E
▼▼▼
KC520M
▼▼ E
▼▼▼
KC935M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
KC915M
▼▼▼ S
▼▼▼▼
KC915M
▼▼▼ E
▼▼▼▼
KY3500
▼▼ E
▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
400
120
600
180
600
180
600
180
800
240
900
270
2800
840
chipload
Fz

KSSM
Indexable Inserts for KSSM SD.T1204/SD.T431
SDCT...PDE-LD2 SDCT-EN-LD2 SDCT-PDF-LE SDCT-FNLE SDCT-PDE-GB2 SDPT-PD-GB2
BS
INSERTS
W
D1
R
ε
LI
15°
S
FACE MILLING
inch
ISO
Catalog number
ANSI
Catalog number
Dimensions
First Choice
Alternate Choice
P
D1 LI = W S Rε BS BG
Chipload min.
fz min.
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
H
S
N
K
M
KC410M
KC520M
KC725M
KC915M
KC935M
SDCT120404PDELLD2 SDCT431PDEL8LD2 4,40 .173 12,70 1/2 4,76 3/16 0,40 1/64 2,70 .106 - - 0,08 .003
SDCT120404PDERLD2 SDCT431PDER8LD2 4,40 .173 12,70 1/2 4,76 3/16 0,40 1/64 2,70 .106 - - 0,08 .003
SDCT120408PDELLD2 SDCT43PDEL8LD2 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,08 .003
SDCT120408PDERLD2 SDCT43PDER8LD2 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,08 .003
SDCT120412PDELLD2 SDCT433PDEL8LD2 4,40 .173 12,70 1/2 4,76 3/16 1,20 3/64 2,70 .106 - - 0,08 .003
SDCT120412PDERLD2 SDCT433PDER8LD2 4,40 .173 12,70 1/2 4,76 3/16 1,20 3/64 2,70 .106 - - 0,08 .003
END MILLING
MILLING
SDCT120416ENLD2 SDCT434ENLD2 4,40 .173 12,70 1/2 4,76 3/16 1,60 1/16 - - - - 0,08 .002
SDCT120420ENLD2 SDCT435ENLD2 4,40 .173 12,70 1/2 4,76 3/16 2,00 5/64 - - - - 0,08 .003
SDCT120424ENLD2 SDCT436ENLD2 4,40 .173 12,70 1/2 4,76 3/16 2,40 3/32 - - - - 0,08 .003
SDCT120432ENLD2 SDCT438ENLD2 4,40 .173 12,70 1/2 4,76 3/16 3,20 1/8 - - - - 0,08 .003
SDCT120404PDFLLE SDCT431PDFL8LE 4,40 .173 12,70 1/2 4,76 3/16 0,40 1/64 2,70 .106 - - 0,08 .003
SDCT120404PDFRLE SDCT431PDFR8LE 4,40 .173 12,70 1/2 4,76 3/16 0,40 1/64 2,70 .106 - - 0,08 .003
SDCT120408PDFLLE SDCT43PDFL8LE 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,08 .003
SDCT120408PDFRLE SDCT43PDFR8LE 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,08 .003
SDCT120412PDFLLE SDCT433PDFL8LE 4,40 .173 12,70 1/2 4,76 3/16 1,20 3/64 2,70 .106 - - 0,08 .003
SDCT120412PDFRLE SDCT433PDFR8LE 4,40 .173 12,70 1/2 4,76 3/16 1,20 3/64 2,70 .106 - - 0,08 .003
SLOTTING / HELICAL
SDCT120416FNLE SDCT434FNLE 4,40 .173 12,70 1/2 4,76 3/16 1,60 1/16 - - - - 0,08 .003
SDCT120420FNLE SDCT435FNLE 4,40 .173 12,70 1/2 4,76 3/16 2,00 5/64 - - - - 0,08 .003
SDCT120424FNLE SDCT436FNLE 4,40 .173 12,70 1/2 4,76 3/16 2,40 3/32 - - - - 0,08 .003
SDCT120432FNLE SDCT438FNLE 4,40 .173 12,70 1/2 4,76 3/16 3,20 1/8 - - - - 0,08 .003
SDET120408PDELGB2 SDET43PDEL8GB2 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,10 .004
SDET120408PDERGB2 SDET43PDER8GB2 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,10 .004
SDET120408PDSRGB2 SDET43PDSR8GB2 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,17 .007
SDET120412PDELGB2 SDET433PDEL8GB2 4,40 .173 12,70 1/2 4,76 3/16 1,20 3/64 2,70 .106 - - 0,10 .004
SDET120412PDERGB2 SDET433PDER8GB2 4,40 .173 12,70 1/2 4,76 3/16 1,20 3/64 2,70 .106 - - 0,10 .004
DIE & MOLD
SDPT120408PDERGB2 SDPT43PDER8GB2 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,08 .003
SDPT120408PDSRGB2 SDPT43PDSR8GB2 4,40 .173 12,70 1/2 4,76 3/16 0,80 1/32 2,70 .106 - - 0,17 .007
SDPT120416PDSRGB2 SDPT434PDSR8GB2 4,40 .173 12,70 1/2 4,76 3/16 1,60 1/16 2,70 .106 - - 0,17 .007
SDPT120420PDSRGB2 SDPT435PDSR8GB2 4,40 .173 12,70 1/2 4,76 3/16 2,00 5/64 2,70 .106 - - 0,17 .007
Order example:
1x KSSP200R3SD43W150L169
10 x SDCT431PDEL8LD2
B90
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSSM Helical
Square Shoulder Mills
End Mills End Mills CV Shank Shell Mills
D6
D
D1
D
90°
AP1
L2
L
D1
90°
AP1
L3
L1
CV50
D1
L
AP1
90°
INSERTS
inch
D1
End Mills
Order
number
ANSI
Catalog number
Number
of
Inserts Z
Weldon
Shank
Effective
Flutes
D L L2 Insert
2.0 2528269 KSSP200R3SD43W150L169 12 3 1.250 4.530 2.25 SD.T1204 1.690 .0940 .031 1.700 16300
AP1
max.
Rmax.
Lead
Insert
Rmax.
Side
Insert
Ibs.
max.
RPM
inch
D1
End Mills
Order
number
ANSI
Catalog number
Number
of
Inserts Z
Steep Taper
CV50
Effective
Flutes
System
Size L L1 L3 Insert
2.0 2528270 KSSP200R3SD43CV50L169 12 3 CV50 - 3.00 2.250 SD.T1204 1.690 .0940 .031 6.730 16300
AP1
max.
Rmax.
Lead
Insert
Rmax.
Side
Insert
Ibs.
max.
RPM
FACE MILLING
metric
Shell Mills
D1
Order
number
ISO
Catalog number
Number
of
Inserts Z
Effective
Flutes D D6 L AP1 Insert
50 2400693 50A3RS90SD12L32 9 3 22 44 55 32 SD.T1204 32 2,40 0,80 0,88 16400
63 2400694 63A3RS90SD12L50 15 3 27 55 70 50 SD.T1204 50 3,20 0,80 2,00 14600
80 2400695 80A4RS90SD12L61 24 4 32 70 80 61 SD.T1204 61 3,20 0,80 4,20 12950
AP1
max.
Rmax.
Lead
Insert
Rmax.
Side
Insert
Kg
max.
RPM
MILLING
END MILLING
inch
Shell Mills
D1
Order
number
ANSI
Catalog number
Number
of
Inserts Z
Effective
Flutes
2.0 2601012 KSSP200R3SD43L125 9 3 .75 1.75 1.875 .312 SD.T1204 1.250 .0940 .031 1.0 16300
2.0 2400680 KSSP200R3SD43L168 12 3 .75 1.75 2.250 .312 SD.T1204 1.650 .0940 .031 1.0 16300
2.5 2400681 KSSP250R3SD43L200 15 3 1.00 2.19 2.750 .375 SD.T1204 2.000 .1250 .031 2.0 14550
3.0 2400682 KSSP300R4SD43L240 24 4 1.25 2.75 3.250 .500 SD.T1204 2.400 .1250 .031 3.8 13300
D
D6
L
Key
Size
Insert
AP1
max.
Rmax.
Lead
Insert
Rmax.
Side
Insert
Ibs.
max.
RPM
SLOTTING / HELICAL
Spare Parts
Catalog number
Torx
Screw
Mounting
Screw
Torx
Wrench
KSSP200R3SD43L125 MS1273 S446CG TT15
KSSP200R3SD43L168 MS1273 S447CG TT15
KSSP250R3SD43L200 MS1273 S462CG TT15
KSSP300R4SD43L240 MS1273 S2149CG TT15
DIE & MOLD
50A3RS90SD12L32 MS1273 MS1235CG TT15
63A3RS90SD43L50 MS1273 MS1238CG TT15
80A4RS90SD43L61 MS1273 MS1241CG TT15
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B91

KSSM Helical
12 mm, 1/2'' IC Insert
INSERTS
FACE MILLING
Cutting speed (Vc) – feet/min
m/min
360 1200
320 1050
270
230
180
140
90
50
ft/min
900
750
600
450
300
150
0 .002 .004
0,05 0,10
Steel Milling Grades
KC935M E
KT530M E
KC725M E
.006
0,15
.008
0,20
.010
0,25
.012
0,30
Chipload (fz) – ipt
KC935M S
KC725M S
.014
0,36
.016
0,41
inch
mm
Coolant
speed
Vc
Starting ft/min
operating
conditions m/min
KC725M
▼ S
▼▼
KC725M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
KC935M
▼▼▼ E
▼▼▼▼
KT530M
▼▼▼ E
▼▼▼▼
650
200
750
230
850
260
1000
300
1000
300
chipload
Fz
350HB or High
Alloy content
(15-5, 17-4
stainless, P20)
Dry preferred Wet, reduce speed by 25%
END MILLING
MILLING
SLOTTING / HELICAL
Cutting speed (Vc) – feet/min
m/min
ft/min
330 1100
300 1000
270 900
240 800
210 700
180 600
150 500
120 400
90 300
60 200
30 100
0 0
Stainless Steel Milling Grades
KC935M E
KC522M E
KC725M E
0 .001 .002 .003 .004 .005 .006 .007 .008 .009 .010 .011 .012 inch
0,03 0,05 0,08 0,10 0,13 0,15 0,18 0,20 0,23 0,25 0,28 0,28 mm
Chipload (fz) – ipt
Coolant
KC725M
▼▼ E
▼▼▼
KC522M
▼▼ E
▼▼▼
KC935M
▼▼▼ E
▼▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
600
180
650
200
800
240
chipload
Fz
Ferritic /
Martensitic
330-450 HB
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.008 500 .007 380 .009
0,20 150 0,18 110 0,23
.008
0,20
.006
0,15
550
170
700
210
.007
0,18
.006
0,15
Austenitic
(304, 316)
400
120
.009
0,23
not
recommended
Ferritic /
Martensitic
135-330 HB
Dry preferred Wet, reduce speed by 25%
DIE & MOLD
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
B92
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSSM Helical
12 mm, 1/2'' IC Insert
Cutting speed (Vc) – feet/min
m/min
ft/min
360 1200
320 1050
270
230
180
140
90
50
900
750
600
450
300
150
KC520M E
KC935M E
0 .002 .004
0,05 0,10
Cast Iron Milling Grades
KC915M E
KC522M E
.006
0,15
.008
0,20
.010
0,25
Chipload (fz) – ipt
KC915M S
KC935M S
.012
0,30
.014
0,36
.016
0,41
inch
mm
Coolant
KC522M
▼▼ E
▼▼▼
KC520M
▼▼ E
▼▼▼
KC935M
▼▼ E
▼▼▼
KC935M
▼▼ S
▼▼▼
KC915M
▼▼▼ S
▼▼▼▼
KC915M
▼▼▼ E
▼▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
400
120
600
180
600
180
600
180
800
240
900
270
chipload
Fz

KDM
Inserts for KDM Screw-On End Mills RDHX / RDPX
RDHX-SGN/SHN RDPX-SHP RDHX-FLP
INSERTS
D 15°
S
D
15°
S
D
S
15°
FACE MILLING
inch
ISO
Catalog number
ANSI
Catalog number
mm
D
inch
mm
Dimensions
S
inch
First Choice
Alternate Choice
Chipload min. fz min.
mm
inch
H
S
N
K
M
P
KC510M
KC522M
KC725M
KC935M
KC110M
RDHX07T1M0SLN RDHX07T1M0SLN 7,00 .276 1,98 .078 0,08 .003
RDHX0702M0SLN RDHX0702M0SLN 7,00 .276 2,38 .042 0,08 .003
RDHX1003M0SGN RDHX1003M0SGN 10,00 .394 3,18 .125 0,08 .003
RDHX12T3M0SGN RDHX12T3M0SGN 12,00 .473 3,97 .156 0,08 .003
RDHX1604M0SGN RDHX1604M0SGN 16,00 .630 4,76 .188 0,08 .003
END MILLING
MILLING
RDPX1003M0SHN RDPX1003M0SHN 9,96 .392 3,18 .125 0,08 .003
RDPX12T3M0SHN RDPX12T3M0SHN 11,95 .471 3,97 .156 0,08 .003
RDPX1604M0SHN RDPX1604M0SHN 15,94 .628 4,76 .188 0,08 .003
RDPX1003M0SHP RDPX1003M0SHP 9,96 .392 3,18 .125 0,08 .003
RDPX12T3M0SHP RDPX12T3M0SHP 11,95 .471 3,97 .156 0,08 .003
RDPX1604M0SHP RDPX1604M0SHP 15,94 .628 4,76 .188 0,08 .003
RDHX0702M0FLP RDHX0702M0FLP 7,00 .276 2,38 .042 0,08 .003
RDHX1003M0FLP RDHX1003M0FLP 10,00 .394 3,18 .125 0,08 .003
RDHX12T3M0FLP RDHX12T3M0FLP 12,00 .473 3,97 .156 0,08 .003
RDHX1604M0FLP RDHX1604M0FLP 16,00 .630 4,76 .188 0,08 .003
DIE & MOLD
SLOTTING / HELICAL
Order example:
1x KDM050RD0702M08075
10 x RDHX07T1M0SLN
B94
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KDM
RDHX Screw-On End Mills
D1
G
D
AP1
L
INSERTS
inch
D1
End Mills
Order
number
Screw-On
Thread
ANSI
Catalog number
Number
of
Inserts Z
G D L
AP1
max.
Insert
Insert
Screw
Torx
Wrench
.500 2511327 KDM050RD0702M08075 2 M8 .511 1.100 .137 RDHX07T1… 193.364 FT7 -
.625 2511345 KDM063RD0702M08100 2 M8 .511 1.100 .137 RDHX0702… 193.341 FT7 -
.625 2511346 KDM063RD0703M08100 3 M8 .511 1.100 .137 RDHX0702… 193.341 FT7 -
.750 2511347 KDM075RD0704M10118 4 M10 .708 1.180 .137 RDHX0702… 193.341 FT7 -
1.000 2511348 KDM100RD0703M12138 3 M12 .826 1.380 .137 RDHX0702… 193.341 FT7 -
1.000 2511349 KDM100RD0705M12138 5 M12 .826 1.380 .137 RDHX0702… 193.341 FT7 -
.750 2511350 KDM075RD1002M10118 2 M10 .708 1.180 .196 RD_X1003… 193.342 FT15 -
1.000 2511351 KDM100RD1002M12138 2 M12 .826 1.375 .196 RD_X1003… 193.342 FT15 -
1.000 2511352 KDM100RD1003M12138 3 M12 .826 1.375 .196 RD_X1003… 193.342 FT15 -
1.500 2511463 KDM150RD1004M16169 4 M16 1.141 1.690 .196 RD_X1003… 193.342 FT15 -
Clamp
Screw
1.000 2511464 KDM100RD1202M12138 2 M12 .826 1.375 .236 RD_X12T3… 193.342 FT15 193.338
1.250 2511465 KDM125RD1203M16169 3 M16 1.141 1.690 .236 RD_X12T3… 193.342 FT15 193.338
1.500 2511466 KDM150RD1204M16169 4 M16 1.141 1.690 .236 RD_X12T3… 193.342 FT15 193.338
1.250 2511466 KDM125RD1606M16169 2 M16 1.141 1.690 .315 RD_X1604… 193.343 FT20 193.338
DIE & MOLD
SLOTTING / HELICAL
MILLING
END MILLING
FACE MILLING
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B95

RDHX
Application Data
INSERTS
Cutting speed (Vc) – feet/min
m/min
ft/min
320 1050
270
230
180
140
90
50
0
900
750
600
450
300
150
0
0 .002 .004 .006
0,05 0,10 0,15
Steel Milling Grades
KC935M S
.008
0,20
.010
0,25
.012
0,30
KC522M S
.014
0,36
Chipload (fz) – ipt
.016
0,41
KC725M S
.018
0,46
.020
0,57
inch
mm
Coolant
KC725M
▼ S
▼▼
KC522M
▼▼ S
▼▼▼
KC935M
▼▼ S
▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
500
150
700
210
750
chipload
Fz
230 0,25
350HB or High
Alloy content
(15-5, 17-4
stainless, P20)
Dry preferred Wet, reduce speed by 25%
FACE MILLING
END MILLING
MILLING
Cutting speed (Vc) – feet/min
m/min
180
150
120
90
60
30
0
ft/min
600
500
400
300
200
100
0
Cast Iron Milling Grades
KC935M S
KC522M S
Coolant
KC522M
▼▼S
▼▼▼
KC935M
▼▼ S
▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
chipload
Fz
400
120
.012
0,30
500 .010
150 0,25

RDHX
Application Data
Cutting speed (Vc) – feet/min
m/min
50
40
40
30
20
20
10
10
ft/min
160
140
120
100
80
60
40
20
Hardened Steels
KC522M S
Coolant
KC522M
▼▼S
▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
650
200
chipload
Fz
Hardened Steel
45 - 52 HRC
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.012 400 .006 250 .002
0,30 120 0,15 80 0,05
Hardened Steel
53 - 59 HRC
Dry not recommended
Hardened Steel
60 - 65 HRC
Wet preferred
INSERTS
0
0
0
.002
0,05
.004
0,10
.006
0,15
.008
0,20
.010
0,25
.012
0,30
.014
0,36
Chipload (fz) – ipt
.016
0,41
.018
0,46
.020
0,57
inch
mm
DIE & MOLD
SLOTTING / HELICAL
MILLING
END MILLING
FACE MILLING
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B97

KSWM KenFEED
NEW
Indexable Inserts for KSWM WPM...
-GP
-HN
L10
L10
D1
D1
INSERTS
Rε
11°
D
S
Rε
11°
D
S
FACE MILLING
metric
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
mm
D
inch
mm
D1 S L10 Rε
inch
mm
inch
Dimensions
mm
inch
mm
inch
First Choice
Alternate Choice
mm
inch
P
Chipload min.
fz min.
WPMW05X315ZZSRHN WPMW05X315ZZSRHN 3 7,94 .313 3,75 .150 3,50 .140 5 .196 1,5 .059 - - 0,3 .012
WPMT05X315ZZERGP WPMT05X315ZZERGP 3 7,94 .313 3,75 .150 3,50 .140 5 .196 1,5 .059 - - 0,3 .012
mm
H
S
N
K
M
inch
KC522M
KC525M
WPMW06X415ZZSRHN WPMW06X415ZZSRHN 3 9,53 .375 4,35 .171 4,20 .165 6 .236 1,5 .059 - - 0,3 .012
WPMW06X415ZZERGP WPMW06X415ZZERGP 3 9,53 .375 4,35 .171 4,20 .165 6 .236 1,5 .059 - - 0,3 .012
WPMT080615ZZSRHN WPMT080615ZZSRHN 3 12,70 .500 5,30 .209 6,35 .250 8 .315 1,5 .059 - - 0,3 .012
WPMT080615ZZERGP WPMT080615ZZERGP 3 12,70 .500 5,30 .209 6,35 .250 8 .315 1,5 .059 - - 0,3 .012
END MILLING
MILLING
Note:
For CAD/CAM programming, please use a theoretical corner radius of 2 mm.
Tool geometry for programming
Machined profile 0,7 mm
Maximum cutting depth 1,5 mm
SLOTTING / HELICAL
R2
0,7
R1,5
1,5
5,7
Possible application
DIE & MOLD
Face
milling
Slot
milling
Ramping
Slot
milling
Circular
plunging
Helical interpolation,
countersinking
a p η a p
D
a e
B98
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSWM KenFEED
KenFEED Cutter
NEW
End Mills
Shell Mills
D
Screw-On
D1
G
D2
D1
D
L
AP1
L2
L
D1
AP1
AP1
L2
L
INSERTS
metric
D1
End Mills
Order
number
ISO
Catalog number
Cylindrical
Shank
Number
of
Inserts Z D L L2 AP1 Insert
20 2622213 20Y02R080A20SWP05 2 20 130 50 1,00 WP..05X3... 3,0° 30
20 2622214 20Y02R130A20SWP05 2 20 180 50 1,00 WP..05X3... 2,5° 30
25 2622215 25Y03R090A25SWP05 3 25 140 50 1,00 WP..05X3... 5,0° 33
32 2622217 32Y03R100A32SWP06 3 32 150 50 1,50 WP..06X4... 3,5° 47
32 2622218 32Y03R150A32SWP06 3 32 200 50 1,50 WP..06X4... 3,0° 47
35 2426594 35Y02R070A32SWP08 2 32 150 40 1,50 WP..0806... 5,0° 51
35 2426593 35Y02R120A32SWP08 2 32 200 40 1,50 WP..0806... 5,0° 51
35 2622219 35Y03R100A32SWP06 3 32 150 50 1,50 WP..06X4... 3,0° 53
max.
Ramp
Angle
Minimum
Bore Size
FACE MILLING
metric
Shell Mills
D1
Order
number
ISO
Catalog number
Number
of
Inserts Z D L L2 AP1 Insert
max.
Ramp
Angle
Minimum
Bore Size
42 2622220 42A05RS91WP05 5 16 39 45 1,00 WP..05X3... 2,0° 70
52 2622229 52A04RS91WP08 4 22 42 50 1,50 WP..0806... 4,0° 78
52 2622221 52A05RS91WP06 5 22 42 50 1,50 WP..06X4... 2,0° 80
66 2403211 66A04RS91WP08 4 27 50 50 1,50 WP..0806... 2,5° 104
66 2622222 66A06RS91WP06 6 27 50 50 1,50 WP..06X4... 1,5° 108
80 2418256 80A05RS91WP08 5 27 50 50 1,50 WP..0806... 1,5° 132
80 2622223 80A07RS91WP06 7 27 50 50 1,50 WP..06X4... 1,0° 140
MILLING
END MILLING
metric
D1
Screw-On
Order
number
ISO
Catalog number
Thread
Number
of
Inserts Z G D2 L AP1 Insert
20 2543286 20Y02R030M10SWP05 2 M10 18 30 1,00 WP..05X3... 3,0° 30
25 2576104 25Y03R035M12SWP05 3 M12 21 35 1,00 WP..05X3... 5,0° 33
32 2622224 32Y03R045M16SWP06 3 M16 29 45 1,50 WP..06X4... 3,0° 47
35 2246763 35Y02R045M16SWP08 2 M16 29 45 1,50 WP..0806... 5,0° 51
35 2622225 35Y03R045M16SWP06 3 M16 29 45 1,50 WP..06X4... 3,0° 53
35 2622226 35Y04R045M16SWP06 4 M16 29 45 1,50 WP..06X4... 2,5° 53
42 2246764 42Y03R045M16SWP08 3 M16 29 45 1,50 WP..0806... 4,5° 63
42 2622227 42Y04R045M16SWP06 4 M16 29 45 1,50 WP..06X4... 2,5° 66
42 2622228 42Y05R045M16SWP05 5 M16 29 45 1,00 WP..05X3... 2,0° 70
max.
Ramp
Angle
Minimum
Bore Size
SLOTTING / HELICAL
metric
Insert
Clamping
Screw
Clamping
Wrench
Safety
Screw
Clamping
Wrench Torx Nm
WP..05X3... 193.443 FT-15 - - - 3,50
WP..06X4... MS1184 FT-15 - - - 3,50
WP..0806... 191.726 FT-20 193.383 FT-20 FT-20 6,00
DIE & MOLD
Order example:
1x 20Y02R080A20SWP05
10 x WPMW05X315ZZSRHN
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B99

KSWM KenFEED
NEW
Indexable Inserts for KSWM WPM...
-GP
-HN
L10
L10
D1
D1
INSERTS
Rε
11°
D
S
Rε
11°
D
S
FACE MILLING
inch
ISO
Catalog number
ANSI
Catalog number
Cutting Edges
mm
D
inch
mm
inch
mm
inch
Dimensions
D1 S L10 Rε
mm
inch
mm
inch
First Choice
Alternate Choice
mm
inch
P
Chipload min.
fz min.
WPMW05X315ZZSRHN WPMW05X315ZZSRHN 3 7,94 .313 3,75 .150 3,50 .140 5 .196 1,5 .059 - - 0,3 .012
WPMT05X315ZZERGP WPMT05X315ZZERGP 3 7,94 .313 3,75 .150 3,50 .140 5 .196 1,5 .059 - - 0,3 .012
mm
H
S
N
K
M
inch
KC522M
KC525M
WPMW06X415ZZSRHN WPMW06X415ZZSRHN 3 9,53 .375 4,35 .171 4,20 .165 6 .236 1,5 .059 - - 0,3 .012
WPMW06X415ZZERGP WPMW06X415ZZERGP 3 9,53 .375 4,35 .171 4,20 .165 6 .236 1,5 .059 - - 0,3 .012
WPMT080615ZZSRHN WPMT080615ZZSRHN 3 12,70 .500 5,30 .209 6,35 .250 8 .315 1,5 .059 - - 0,3 .012
WPMT080615ZZERGP WPMT080615ZZERGP 3 12,70 .500 5,30 .209 6,35 .250 8 .315 1,5 .059 - - 0,3 .012
END MILLING
MILLING
Note:
For CAD/CAM programming, please use a theoretical corner radius of .079 inch.
Tool geometry for programming
Machined profile .028 inch
Maximum cutting depth .059 inch
SLOTTING / HELICAL
R.079
.028
R.059
.059
.224
Possible application
DIE & MOLD
Face
milling
Slot
milling
Ramping
Slot
milling
Circular
plunging
Helical interpolation,
countersinking
a p η a p
D
a e
B100
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSWM KenFEED
KenFEED Cutter
NEW
End Mills
Shell Mills
D
D1
D
L
AP1
L2
L
D1
AP1
INSERTS
inch
D1
End Mills
Order
number
ANSI
Catalog number
Cylindrical
Shank
Number
of
Inserts Z D L L2
AP1 Insert
1.500 2509390 KF150WP0603W125L300 3 1.250 6.000 3.000 .059 WP..06X4… 5.0° -
1.500 2509391 KF150WP0603W125L400 3 1.250 7.000 4.000 .059 WP..06X4… 5.0° -
1.500 2509392 KF150WP0603W150L600 3 1.500 9.000 6.000 .059 WP..06X4… 5.0° -
max.
Ramp
Angle
Minimum
Bore Size
inch
D1
Shell Mills
Order
number
ANSI
Catalog number
Number
of
Inserts Z D L AP1 Insert
2.000 2509403 KF200WP0804S075L157* 4 0.750 1.570 .059 WP..0806… 4.0° 3
2.500 2509404 KF250WP0804S100L175** 4 1.000 1.750 .059 WP..0806… 2.0° 4
3.000 2509405 KF300WP0805S125L175 5 1.250 1.750 .059 WP..0806… 1.0° 5
max.
Ramp
Angle
Minimum
Bore Size
FACE MILLING
inch
Spare Parts
MILLING
END MILLING
Insert
Clamping
Screw
*Mounting screw: S445
**Mounting screw: S458
Clamping
Wrench
Safety
Screw
Clamping
Wrench Torx in.-lbs.
WP..06X4... MS1184 FT-15 - - - 32
WP..0806... 191.726 FT-20 193.383 FT-20 FT-20 53
DIE & MOLD
SLOTTING / HELICAL
Order example:
1x KF150WP0603W125L275
3x WPMW05X315ZZSRHN
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B101

KSWM KenFEED
Application Data
INSERTS
m/min
270
Cutting speed (Vc) – feet/min
240
210
180
150
120
90
60
30
0
ft/min
900
800
700
600
500
400
300
200
100
0
Steel Milling Grades
KC522M E
KC525M E
Coolant
speed
Vc
Starting ft/min
operating
conditions m/min
KC525M
▼ E
▼▼
KC522M
▼▼ E
▼▼▼
500
150
600
chipload
Fz
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.060 450 .040 400 .030
1,50 140 1,00 120 0,75
.060
180 1,50
350HB or High
Alloy content
(15-5, 17-4
stainless, P20)
Dry preferred Wet, reduce speed by 25%
0 .020 .040
0,51 0,02
.060
1,52
.080
2,03
.100
2,54
Chipload (fz) – ipt
.120
3,05
.140
3,56
inch
mm
END MILLING
MILLING
FACE MILLING
Cutting speed (Vc) – feet/min
m/min ft/min
210 700
180 600
150 500
120 400
90 300
60 200
30 100
Stainless Steel Milling Grades
KC525M E
Coolant
KC525M
▼▼ E
▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
450
140
chipload
Fz
Austenitic
(304, 316)
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.050 400 .040 300 .030
1,25 120 1,00 90 0,75
Ferritic /
Martensitic
135-330 HB
Ferritic /
Martensitic
330-450 HB
Dry preferred Wet, reduce speed by 25%
0
0
SLOTTING / HELICAL
0 .010 .020 .030 .040 .050 .060
0,25 0,51 0,76 1,02 1,27 1,52
Chipload (fz) – ipt
.070
1,78
.080
2,03
inch
mm
DIE & MOLD
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
B102
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KSWM KenFEED
Application Data
Cutting speed (Vc) – feet/min
m/min
90
80
60
50
30
20
ft/min
300
250
200
150
100
50
High-Temperature Alloys Milling Grades
KC525M E
Coolant
Starting
operating
conditions
KC525M
▼▼E
▼▼▼
speed
Vc
ft/min
m/min
200
60
chipload
Fz
Titanium
(Ti 6 Al 4 V)
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.020 120 .010 200 .020
0,50 40 0,25 60 0,50
Dry not recommended
Nickel, Cobalt
Alloys (Inconel, Iron Alloys
Hastelloy, (X12NiCrSi3616,
Monel, X2NiCrAlTi3220)
Nimonic)
Wet preferred
INSERTS
0
0
0 .010 .020 .030 .040
0,25 0,51 0,76 1,02
.050
1,27
Chipload (fz) – ipt
.060
1,52
.070
1,78
.080
2,03
inch
mm
Cutting speed (Vc) – feet/min
FACE MILLING
m/min ft/min
210 700
180 600
150 500
120 400
90 300
60 200
30 100
Hardened Steels
KC522M E
Coolant
Starting
operating
conditions
KC522M
▼▼ E
▼▼▼
speed
Vc
ft/min
m/min
650
200
chipload
Fz
Hardened
Steel
45 - 52 HRC
speed
Vc
chipload
Fz
Hardened
Steel
53 - 59 HRC
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.040
1,00
400
120
Dry not recommended
.030
0,75
250
80
.020
0,50
Hardened
Steel
60 - 65 HRC
Wet preferred
MILLING
END MILLING
0
0
0 .010 .020 .030 .040 .050 .060
0,25 0,51 0,76 1,02 1,27 1,52
Chipload (fz) – ipt
.070
1,78
.080
2,03
inch
mm
SLOTTING / HELICAL
DIE & MOLD
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B103

KDMB
Indexable Inserts for KDMB Line
-GN -GC -LD
W
W
W
INSERTS
S
S
S
FACE MILLING
metric
ISO
Catalog
number old
ISO
Catalog
number new
mm
W
inch
mm
S
inch
mm
inch
Dimensions
mm
inch
mm
inch
First Choice
Alternate Choice
mm
inch
P
Chipload min.
fz min.
mm inch
K115M
KC515M
KC530M
KBN08GN KDMB08M0ERGN 8,00 .315 2,0 .079 - - - - - - - - 0,20 .008
KBN10GN KDMB10M0ERGN 10,00 .394 2,5 .098 - - - - - - - - 0,20 .008
KBN12GN KDMB12M0ERGN 12,00 .472 2,5 .098 - - - - - - - - 0,20 .008
KBN16GN KDMB16M0ERGN 16,00 .630 3,0 .118 - - - - - - - - 0,20 .008
KBN20GN KDMB20M0ERGN 20,00 .787 3,0 .118 - - - - - - - - 0,20 .008
KBN25GN KDMB25M0ERGN 25,00 .984 4,0 .157 - - - - - - - - 0,20 .008
KBN30GN KDMB30M0ERGN 30,00 1.181 5,0 .197 - - - - - - - - 0,20 .008
KBN32GN KDMB32M0ERGN 32,00 1.260 5,0 .197 - - - - - - - - 0,20 .008
H
S
N
K
M
KBN08GC KDMB08M0ERGC 8,00 .315 2,0 .079 - - - - - - - - 0,10 .004
KBN10GC KDMB10M0ERGC 10,00 .394 2,5 .098 - - - - - - - - 0,10 .004
KBN12GC KDMB12M0ERGC 12,00 .472 2,5 .098 - - - - - - - - 0,10 .004
KBN16GC KDMB16M0ERGC 16,00 .630 3,0 .118 - - - - - - - - 0,10 .004
KBN20GC KDMB20M0ERGC 20,00 .787 3,0 .118 - - - - - - - - 0,10 .004
KBN25GC KDMB25M0ERGC 25,00 .984 4,0 .157 - - - - - - - - 0,10 .004
KBN30GC KDMB30M0ERGC 30,00 1.181 5,0 .197 - - - - - - - - 0,10 .004
KBN32GC KDMB32M0ERGC 32,00 1.260 5,0 .197 - - - - - - - - 0,10 .004
KBN08LD KDMB08M0FRLD 8,00 .315 2,0 .079 - - - - - - - - 0,05 .002
KBN10LD KDMB10M0FRLD 10,00 .394 2,5 .098 - - - - - - - - 0,05 .002
KBN12LD KDMB12M0FRLD 12,00 .472 2,5 .098 - - - - - - - - 0,05 .002
KBN16LD KDMB16M0FRLD 16,00 .630 3,0 .118 - - - - - - - - 0,05 .002
KBN20LD KDMB20M0FRLD 20,00 .787 3,0 .118 - - - - - - - - 0,05 .002
KBN25LD KDMB25M0FRLD 25,00 .984 4,0 .157 - - - - - - - - 0,05 .002
KBN30LD KDMB30M0FRLD 30,00 1.181 5,0 .197 - - - - - - - - 0,05 .002
KBN32LD KDMB32M0FRLD 32,00 1.260 5,0 .197 - - - - - - - - 0,05 .002
DIE & MOLD
END MILLING
MILLING
SLOTTING / HELICAL
Order example:
1x KDMB08R030M06ST
10 x KDMB08M0ERGN
B104
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KDMB Finishing Mills
KDMB Screw-On Mills and End Mills
Screw-On
End Mills – Necked
Steel and Carbide Shank
End Mills
Tapered Steel Shank
3°
D1
G D2
D1
D3
D
D1
D
AP1
L2
L
AP1
L2
L
AP1
L2
L
INSERTS
metric
Screw-On End Mills
Thread
D1
Order
number ISO Code old ISO Code new
Number
of
Flutes
G D2 L L2 AP1 Insert
Clamping
Screw
8 1918649 KBNM083006HP KDMB08R030M06ST 2 M06 10 44,50 30 4,0 KDM.08... 193.395 FT8
10 1918650 KBNM103006HP KDMB10R030M06ST 2 M06 10 44,50 30 5,0 KDM.10... 193.394 FT15
12 1918651 KBNM123008HP KDMB12R030M08ST 2 M08 13 47,50 30 6,0 KDM.12... 193.393 FT20
16 1918652 KBNM163508HP KDMB16R035M08ST 2 M08 13 52,50 35 8,0 KDM.16... 193.392 FT20
20 1918663 KBNM203510HP KDMB20R035M10ST 2 M10 18 54,50 35 10,0 KDM.20... 193.391 FT20
25 1918664 KBNM254012HP KDMB25R040M12ST 2 M12 21 62,00 40 12,5 KDM.25... 193.390 KT30
Torx
Key
FACE MILLING
metric
D1
Necked End Mills
Order
number ISO Code old ISO Code new
Number
of
Flutes
Cylindrical
Shank
D D3 L L2 AP1 Insert
Clamping
Screw
12 1918676 KBNE1213012HPSS KDMB12R130A12SN 2 12 10,50 130 32 6,0 KDM.12... 193.393 FT20
12 1918677 KBNE1215012HPSS KDMB12R150A12SN 2 12 10,50 150 46 6,0 KDM.12... 193.393 FT20
16 1918678 KBNE1614016HPSS KDMB16R140A16SN 2 16 14,00 140 36 8,0 KDM.16... 193.392 FT20
16 1918679 KBNE1616016HPSS KDMB16R160A16SN 2 16 14,00 160 53 8,0 KDM.16... 193.392 FT20
20 1918680 KBNE2016020HPSS KDMB20R160A20SN 2 20 18,00 160 45 10,0 KDM.20... 193.391 FT20
20 1918681 KBNE2017520HPSS KDMB20R175A20SN 2 20 18,00 175 61 10,0 KDM.20... 193.391 FT20
25 1918682 KBNE2516025HPSS KDMB25R160A25SN 2 25 22,40 160 70 12,5 KDM.25... 193.390 KT30
25 1918683 KBNE2519025HPSS KDMB25R190A25SN 2 25 22,40 190 56 12,5 KDM.25... 193.390 KT30
32 1918684 KBNE3217532HPSS KDMB32R175A32SN 2 32 28,60 175 56 16,0 KDM.32... 193.389 KT30
32 1918685 KBNE3221032HPSS KDMB32R210A32SN 2 32 28,60 210 80 16,0 KDM.32... 193.389 KT30
Torx
Key
MILLING
END MILLING
metric
NEW
D1
metric
D1
Necked End Mills, Carbide Shank
with Through Coolant
Order
number
ISO Code
Tapered End Mills
Order
number ISO Code old ISO Code new
Cylindrical
Shank
Number
of
Flutes D D3 L L2 AP1 Insert
Number
of
Flutes
D L L2 AP1 Insert
Clamping
Screw
8 2877240 KDMB08R100A08HNC 2 8 7,00 100 25 4,0 KDM.08... 193.395 FT8
8 2877241 KDMB08R150A08HNC 2 8 7,00 150 40 4,0 KDM.08... 193.395 FT8
10 2877242 KDMB10R120A10HNC 2 10 8,80 120 35 5,0 KDM.10... 193.394 FT15
10 2877373 KDMB10R150A10HNC 2 10 8,80 150 50 5,0 KDM.10... 193.394 FT15
12 2877374 KDMB12R120A12HNC 2 12 10,50 120 35 6,0 KDM.12... 193.393 FT20
12 2877375 KDMB12R160A12HNC 2 12 10,50 160 50 6,0 KDM.12... 193.393 FT20
16 2877376 KDMB16R140A16HNC 2 16 14,00 140 40 8,0 KDM.16... 193.392 FT20
16 2877377 KDMB16R175A16HNC 2 16 14,00 175 55 8,0 KDM.16... 193.392 FT20
20 2877378 KDMB20R140A20HNC 2 20 18,00 140 50 10,0 KDM.20... 193.391 FT20
20 2877379 KDMB20R190A20HNC 2 20 18,00 190 75 10,0 KDM.20... 193.391 FT20
25 2877380 KDMB25R160A25HNC 2 25 22,40 160 60 12,5 KDM.25... 193.390 KT30
25 2877381 KDMB25R210A25HNC 2 25 22,40 210 90 12,5 KDM.25... 193.390 KT30
32 2877382 KDMB32R190A32HNC 2 32 28,60 190 65 16,0 KDM.32... 193.389 KT30
32 2877383 KDMB32R240A32HNC 2 32 28,60 240 105 16,0 KDM.32... 193.389 KT30
Cylindrical
Shank
Clamping
Screw
8 1918669 KBNE0814012HPTN KDMB08R140A08ST 2 10 140 50 4,0 KDM.08... 193.395 FT8
10 1918670 KBNE1015012HPTN KDMB10R150A10ST 2 12 150 35 5,0 KDM.10... 193.394 FT15
12 1918671 KBNE1216016HPTN KDMB12R160A12ST 2 16 160 60 6,0 KDM.12... 193.393 FT20
16 1918672 KBNE1617520HPTN KDMB16R175A16ST 2 20 175 67 8,0 KDM.16... 193.392 FT20
20 1918673 KBNE2019025HPTN KDMB20R190A20ST 2 25 190 80 10,0 KDM.20... 193.391 FT20
25 1918674 KBNE2521032HPTN KDMB25R210A25ST 2 32 210 100 12,5 KDM.25... 193.390 KT30
32 1918675 KBNE3224040HPTN KDMB32R240A32ST 2 40 240 123 16,0 KDM.32... 193.389 KT30
Torx
Key
Torx
Key
SLOTTING / HELICAL
DIE & MOLD
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B105

KDMB
NEW
Indexable Inserts for KDMB Line
-GN
-GC
Rε
Rε
W
W
INSERTS
S
S
FACE MILLING
inch
Catalog
number
mm
W
inch
mm
S
inch
mm
Rε
inch
Dimensions
mm
inch
mm
inch
First Choice
Alternate Choice
mm
inch
P
Chipload min.
fz min.
mm inch
KDMB0500M0ERGN 12,70 .500 2,5 .098 6,35 .250 - - - - - - 0,20 .008
KDMB0750M0ERGN 19,05 .750 3,0 .118 9,53 .375 - - - - - - 0,20 .008
KDMB1000M0ERGN 25,40 1.000 4,0 .157 12,70 .500 - - - - - - 0,20 .008
H
S
N
K
M
K115M
KC515M
KC530M
END MILLING
MILLING
KDMB0375M0ERGC 9,53 .375 2,5 .098 4,76 .187 - - - - - - 0,10 .004
KDMB0500M0ERGC 12,70 .500 2,5 .098 6,35 .250 - - - - - - 0,10 .004
KDMB0625M0ERGC 15,88 .625 3,0 .118 7,94 .312 - - - - - - 0,10 .004
KDMB0750M0ERGC 19,05 .750 3,0 .118 9,53 .375 - - - - - - 0,10 .004
KDMB1250M0ERGC 31,75 1.250 5,0 .197 15,88 .625 - - - - - - 0,10 .004
DIE & MOLD
SLOTTING / HELICAL
Order example:
1x KDMB0375R354A038SN
10 x KDMB0500M0ERGN
B106
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KDMB Finishing Mills
KDMB Screw-On Mills and End Mills
NEW
End Mills – Necked
Steel Shank
End Mills – Necked
Carbide Shank
End Mills
Tapered Steel Shank
3°
D1
D3
D
D1
D
D1
D
AP1
L2
L
AP1
L2
D3
L
AP1
D2
L2
L
INSERTS
inch
D1
Necked End Mills
Order
number
Catalog number
Number
of
Flutes
Cylindrical
Shank
D D3 L L2 AP1 Insert
Clamping
Screw
.375 2877812 KDMB0375R354A038SN 2 .375 .346 3.543 .500 .188 KDM.0375... 193.394 FT15
.500 2878433 KDMB0500R591A050SN 2 .500 .413 5.906 .500 .250 KDM.0500... 193.393 FT20
.500 2878434 KDMB0500R512A050SN 2 .500 .413 5.118 .500 .250 KDM.0500... 193.393 FT20
.625 2878435 KDMB0625R551A063SN 2 .625 .551 5.512 .625 .313 KDM.0625... 193.392 FT20
.625 2878436 KDMB0625R630A063SN 2 .625 .551 6.299 .625 .313 KDM.0625... 193.392 FT20
.750 2878437 KDMB0750R630A075SN 2 .750 .709 6.299 .750 .375 KDM.0750... 193.391 FT20
.750 2878438 KDMB0750R689A075SN 2 .750 .709 6.890 .750 .375 KDM.0750... 193.391 FT20
.750 2878439 KDMB0750R827A075SN 2 .750 .709 8.268 .750 .375 KDM.0750... 193.391 FT20
1.000 2878440 KDMB1000R630A100SN 2 1.000 .882 6.299 1.000 .500 KDM.1000... 193.390 KT30
1.000 2878441 KDMB1000R748A100SN 2 1.000 .882 7.480 1.000 .500 KDM.1000... 193.390 KT30
1.250 2878442 KDMB1250R689A125SN 2 1.250 1.126 6.890 1.250 .625 KDM.1250... 193.389 KT30
1.250 2878443 KDMB1250R827A125SN 2 1.250 1.126 8.268 1.250 .625 KDM.1250... 193.389 KT30
Torx
Key
FACE MILLING
inch
D1
Necked End Mills, Carbide Shank
with Through Coolant
Order
number
Catalog number
Number
of
Flutes D D3 L L2 AP1 Insert
Clamping
Screw
.375 2879403 KDMB0375R472A038HNC 2 .375 .346 4.724 .375 .188 KDM.0375... 193.394 FT15
.375 2879404 KDMB0375R591A038HNC 2 .375 .346 5.906 .375 .188 KDM.0375... 193.394 FT15
.500 2879405 KDMB0500R472A050HNC 2 .500 .413 4.724 .500 .250 KDM.0500... 193.393 FT20
.500 2879406 KDMB0500R630A050HNC 2 .500 .413 6.299 .500 .250 KDM.0500... 193.393 FT20
.625 2879407 KDMB0625R551A063HNC 2 .625 .551 5.512 .625 .313 KDM.0625... 193.392 FT20
.625 2879408 KDMB0625R689A063HNC 2 .625 .551 6.890 .625 .313 KDM.0625... 193.392 FT20
.750 2879409 KDMB0750R551A075HNC 2 .750 .709 5.512 .750 .375 KDM.0725... 193.391 FT20
.750 2879410 KDMB0750R827A075HNC 2 .750 .709 8.270 .750 .375 KDM.0725... 193.391 FT20
1.000 2879411 KDMB1000R630A100HNC 2 1.000 .882 6.299 1.000 .500 KDM.1000... 193.390 KT30
1.000 2879412 KDMB1000R906A100HNC 2 1.000 .882 9.060 1.000 .500 KDM.1000... 193.390 KT30
1.250 2879413 KDMB1250R748A125HNC 2 1.250 1.126 7.480 1.250 .625 KDM.1250... 193.389 KT30
1.250 2879414 KDMB1250R945A125HNC 2 1.250 1.126 9.449 1.250 .625 KDM.1250... 193.389 KT30
inch
D1
Tapered End Mills
Order
number
Catalog number
Number
of
Flutes
Cylindrical
Shank
Cylindrical
Shank
D D2 L L2 AP1 Insert
Clamping
Screw
.312 2878444 KDMB0312R551A031ST 2 .312 .276 5.512 5.512 .156 KDM.0312... 193.395 FT8
.375 2878445 KDMB0375R591A038ST 2 .375 .346 5.906 5.906 .188 KDM.0375... 193.394 FT15
.500 2878446 KDMB0500R630A050ST 2 .500 .413 6.299 6.299 .250 KDM.0500... 193.393 FT20
.625 2878447 KDMB0625R689A063ST 2 .625 .551 6.890 6.890 .313 KDM.0625... 193.392 FT20
.750 2878448 KDMB0750R748A075ST 2 .750 .709 7.480 7.480 .375 KDM.0750... 193.391 FT20
1.000 2878449 KDMB1000R827A100ST 2 1.000 .882 8.268 8.268 .500 KDM.1000... 193.390 KT30
1.250 2878450 KDMB1250R945A125ST 2 1.250 1.126 9.449 9.449 .625 KDM.1250... 193.389 KT30
Torx
Key
Torx
Key
MILLING
END MILLING
SLOTTING / HELICAL
DIE & MOLD
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B107

KDMS
Indexable Inserts for KDMB/KDMT Line KDMS...
KDMS-GN KDMS-GC KDMT-GN
KDMT-GC
INSERTS
W
W
W
W
Rε
LI
S
Rε
LI
S
Rε
LI
S
Rε
LI
S
FACE MILLING
metric
ISO
Catalog
number old
ISO
Catalog
number new
Cutting Edges
mm
W
inch
Dimensions
Ll S Rε
mm inch mm inch mm inch
mm
First Choice
Alternate Choice
inch
mm
inch
H
S
N
K
M
P
Chipload min.
fz min.
mm inch
KC515M
KC530M
KTC10GN KDMS1008ERGN 2 10,00 .394 11,5 .453 2,5 .098 0,80 .031 - - - - 0,2 .008
KTC12GN KDMS1210ERGN 2 12,00 .472 14,0 .551 2,5 .098 1,00 .039 - - - - 0,2 .008
KTC16GN KDMS1613ERGN 2 16,00 .630 16,0 .630 3,0 .118 1,30 .051 - - - - 0,2 .008
KTC20GN KDMS2016ERGN 2 20,00 .787 18,0 .709 3,0 .118 1,60 .063 - - - - 0,2 .008
KTC25GN KDMS2520ERGN 2 25,00 .984 23,5 .925 4,0 .157 2,00 .079 - - - - 0,2 .008
KTC32GN KDMS3225ERGN 2 32,00 1.260 28,0 1.102 5,0 .197 2,50 .098 - - - - 0,2 .008
END MILLING
MILLING
KTC08GC KDMS0806ERGC 2 8,00 .315 9,5 .374 2,0 .079 0,60 .024 - - - - 0,1 .004
KTC10GC KDMS1008ERGC 2 10,00 .394 11,5 .453 2,5 .098 0,80 .031 - - - - 0,1 .004
KTC12GC KDMS1210ERGC 2 12,00 .472 14,0 .551 2,5 .098 1,00 .039 - - - - 0,1 .004
KTC16GC KDMS1613ERGC 2 16,00 .630 16,0 .630 3,0 .118 1,30 .051 - - - - 0,1 .004
KTC20GC KDMS2016ERGC 2 20,00 .787 18,0 .709 3,0 .118 1,60 .063 - - - - 0,1 .004
KTC25GC KDMS2520ERGC 2 25,00 .984 23,5 .925 4,0 .157 2,00 .079 - - - - 0,1 .004
KTC32GC KDMS3225ERGC 2 32,00 1.260 28,0 1.102 5,0 .197 2,50 .098 - - - - 0,1 .004
SLOTTING / HELICAL
KTC12BD KDMT1210ERGN 2 12,00 .472 14,0 .551 2,5 .098 1,00 .039 - - - - 0,2 .008
KDMT1220ERGN 2 12,00 .472 14,0 .551 2,5 .098 2,00 .079 - - - - 0,2 .008
KDMT1610ERGN 2 16,00 .630 16,0 .630 3,0 .118 1,00 .039 - - - - 0,2 .008
KTC16BD KDMT1630ERGN 2 16,00 .630 16,0 .630 3,0 .118 3,00 .118 - - - - 0,2 .008
KDMT2010ERGN 2 20,00 .787 18,0 .709 3,0 .118 1,00 .039 - - - - 0,2 .008
KTC20BD KDMT2040ERGN 2 20,00 .787 18,0 .709 3,0 .118 4,00 .157 - - - - 0,2 .008
KDMT2510ERGN 2 25,00 .984 23,5 .925 4,0 .157 1,00 .039 - - - - 0,2 .008
KTC25BD KDMT2550ERGN 2 25,00 .984 23,5 .925 4,0 .157 5,00 .197 - - - - 0,2 .008
DIE & MOLD
KDMT1210ERGC 2 12,00 .472 14,0 .551 2,5 .098 1,00 .039 - - - - 0,1 .004
KTC12BCDF KDMT1220ERGC 2 12,00 .472 14,0 .551 2,5 .098 2,00 .079 - - - - 0,1 .004
KDMT1610ERGC 2 16,00 .630 16,0 .630 3,0 .118 1,00 .039 - - - - 0,1 .004
KTC16BCDF KDMT1630ERGC 2 16,00 .630 16,0 .630 3,0 .118 3,00 .118 - - - - 0,1 .004
KDMT2010ERGC 2 20,00 .787 18,0 .709 3,0 .118 1,00 .039 - - - - 0,1 .004
KTC20BCDF KDMT2040ERGC 2 20,00 .787 18,0 .709 3,0 .118 4,00 .157 - - - - 0,1 .004
KDMT2510ERGC 2 25,00 .984 23,5 .925 4,0 .157 1,00 .039 - - - - 0,1 .004
KTC25BCDF KDMT2550ERGC 2 25,00 .984 23,5 .925 4,0 .157 5,00 .197 - - - - 0,1 .004
NEW
KDMT05004ERGC 2 12,70 .500 2,5 .098 2,5 .098 0,80 .032 - - - - 0,1 .004
KDMT05002ERGC 2 12,70 .500 2,5 .098 2,5 .098 1,60 .063 - - - - 0,1 .004
KDMT06254ERGC 2 15,88 .625 3,0 .118 3,0 .118 0,80 .032 - - - - 0,1 .004
KDMT06252ERGC 2 15,88 .625 3,0 .118 3,0 .118 1,60 .063 - - - - 0,1 .004
KDMT07504ERGC 2 19,05 .750 3,0 .118 3,0 .118 0,80 .032 - - - - 0,1 .004
KDMT07502ERGC 2 19,05 .750 3,0 .118 3,0 .118 1,60 .063 - - - - 0,1 .004
KDMT10004ERGC 2 25,40 1.000 4,0 .157 4,0 .157 0,80 .032 - - - - 0,1 .004
KDMT10002ERGC 2 25,40 1.000 4,0 .157 4,0 .157 1,60 .063 - - - - 0,1 .004
KDMT10004ERGC 2 25,40 1.000 4,0 .157 4,0 .157 3,18 .125 - - - - 0,1 .004
Order example:
1x KDMT12R032M08SN
10 x KDMS0806ERGN
B108
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KDMT Finishing Mills
KDMT Screw-On Mills and End Mills with Carbide Shank
Screw-On
End Mills – Necked
Steel and Carbide Shank
End Mills
Tapered Steel Shank
3°
D1
G D2
D1
D
D1
D
Rε
AP1
L2
L
Rε
AP1
L2
D3
L
AP1
D2
L2
L
INSERTS
metric
Screw-On End Mills
Thread
D1
metric
Order
number
ISO
Catalog
number old
ISO
Catalog
number new
Number
of
Flutes G D2 L L2 AP1 Insert
Clamping
Screw
12 1918665 KTCM123208HP KDMT12R032M08SN 2 M08 13 49,50 30 14,0 KDM.12... 193.393 FT20
16 1918666 KTCM163708HP KDMT16R037M08SN 2 M08 13 54,50 30 16,0 KDM.16... 193.392 FT20
20 1918667 KTCM203710HP KDMT20R037M10SN 2 M10 18 56,50 30 18,0 KDM.20... 193.391 FT20
25 1918668 KTCM254212HP KDMT25R042M12SN 2 M12 21 64,00 35 23,5 KDM.25... 193.390 KT30
D1
Necked End Mills
Order
number
ISO
Catalog
number old
ISO
Catalog
number new
Number
of
Flutes
Cylindrical
Shank
D D3 L L2 AP1 Insert
Clamping
Screw
12 1918690 KTCE1213012HPSS KDMT12R130A12SN 2 12 10,50 132 34 14,0 KDM.12... 193.393 FT20
12 1918691 KTCE1215012HPSS KDMT12R150A12SN 2 12 10,50 152 48 14,0 KDM.12... 193.393 FT20
16 1918692 KTCE1614016HPSS KDMT16R140A16SN 2 16 14,00 142 38 16,0 KDM.16... 193.392 FT20
16 1918693 KTCE1616016HPSS KDMT16R160A16SN 2 16 14,00 162 55 16,0 KDM.16... 193.392 FT20
20 1918694 KTCE2016020HPSS KDMT20R160A20SN 2 20 18,00 162 47 18,0 KDM.20... 193.391 FT20
20 1918695 KTCE2017520HPSS KDMT20R175A20SN 2 20 18,00 177 63 18,0 KDM.20... 193.391 FT20
25 1918696 KTCE2516025HPSS KDMT25R160A25SN 2 25 22,40 162 47 23,5 KDM.25... 193.390 KT30
25 1918697 KTCE2519025HPSS KDMT25R190A25SN 2 25 22,40 192 72 23,5 KDM.25... 193.390 KT30
32 1918698 KTCE3217532HPSS KDMT32R175A32SN 2 32 28,60 177 58 28,0 KDM.32... 193.389 KT30
32 1918699 KTCE3221032HPSS KDMT32R210A32SN 2 32 28,60 212 82 28,0 KDM.32... 193.389 KT30
Torx
Key
Torx
Key
FACE MILLING
MILLING
END MILLING
metric
NEW
D1
Necked End Mills, Carbide Shank
with Through Coolant
Order
number
ISO
Catalog
number new
Number
of
Flutes
Cylindrical
Shank
D D2 L L2 AP1 Insert
Clamping
Screw
12 2877384 KDMT12R120A12HNC 2 12 10,5 122 37 14,0 KDM.12... 193.393 FT20
12 2877385 KDMT12R160A12HNC 2 12 10,5 162 52 14,0 KDM.12... 193.393 FT20
16 2877386 KDMT16R140A16HNC 2 16 14,0 142 42 16,0 KDM.16... 193.392 FT20
16 2877387 KDMT16R175A16HNC 2 16 14,0 177 57 16,0 KDM.16... 193.392 FT20
20 2877388 KDMT20R140A20HNC 2 20 18,0 142 52 18,0 KDM.20... 193.391 FT20
20 2877389 KDMT20R190A20HNC 2 20 18,0 192 77 18,0 KDM.20... 193.391 FT20
25 2877390 KDMT25R160A25HNC 2 25 22,4 162 62 23,5 KDM.25... 193.390 KT30
25 2877391 KDMT25R210A25HNC 2 25 22,4 212 92 23,5 KDM.25... 193.390 KT30
32 2877392 KDMT32R190A32HNC 2 32 28,6 192 67 28,0 KDM.32... 193.389 KT30
32 2877453 KDMT32R240A32HNC 2 32 28,6 242 107 28,0 KDM.32... 193.389 KT30
Torx
Key
DIE & MOLD
SLOTTING / HELICAL
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B109

KDMT
NEW
Indexable Inserts for KDMT Line KDMT...
KDMT-GN
KDMT-GC
W
W
INSERTS
Rε
Ll
S
Rε
Ll
S
FACE MILLING
inch
ANSI
Catalog
number old
ANSI
Catalog
number new
Cutting Edges
mm
W
inch
mm
Ll S Rε
inch
mm
inch
Dimensions
mm
inch
mm
inch
First Choice
Alternate Choice
mm
inch
P
Chipload min.
fz min.
mm inch
KDMT05002ERGN 2 12,70 .500 2,5 .098 2,5 .098 0,80 .032 - - - - 0,2 .008
KDMT05004ERGN 2 12,70 .500 2,5 .098 2,5 .098 1,60 .063 - - - - 0,2 .008
KDMT06252ERGN 2 15,88 .625 3,0 .118 3,0 .118 0,80 .032 - - - - 0,2 .008
KDMT06254ERGN 2 15,88 .625 3,0 .118 3,0 .118 1,60 .063 - - - - 0,2 .008
KDMT07502ERGN 2 19,05 .750 3,0 .118 3,0 .118 0,80 .032 - - - - 0,2 .008
KDMT07504ERGN 2 19,05 .750 3,0 .118 3,0 .118 1,60 .063 - - - - 0,2 .008
KDMT10002ERGN 2 25,40 1.000 4,0 .157 4,0 .157 0,80 .032 - - - - 0,2 .008
KDMT10004ERGN 2 25,40 1.000 4,0 .157 4,0 .157 1,60 .063 - - - - 0,2 .008
KDMT10002ERGN 2 25,40 1.000 4,0 .157 4,0 .157 3,18 .125 - - - - 0,2 .008
H
S
N
K
M
KC515M
END MILLING
MILLING
KDMT05004ERGC 2 12,70 .500 2,5 .098 2,5 .098 0,80 .032 - - - - 0,1 .004
KDMT05002ERGC 2 12,70 .500 2,5 .098 2,5 .098 1,60 .063 - - - - 0,1 .004
KDMT06254ERGC 2 15,88 .625 3,0 .118 3,0 .118 0,80 .032 - - - - 0,1 .004
KDMT06252ERGC 2 15,88 .625 3,0 .118 3,0 .118 1,60 .063 - - - - 0,1 .004
KDMT07504ERGC 2 19,05 .750 3,0 .118 3,0 .118 0,80 .032 - - - - 0,1 .004
KDMT07502ERGC 2 19,05 .750 3,0 .118 3,0 .118 1,60 .063 - - - - 0,1 .004
KDMT10004ERGC 2 25,40 1.000 4,0 .157 4,0 .157 0,80 .032 - - - - 0,1 .004
KDMT10002ERGC 2 25,40 1.000 4,0 .157 4,0 .157 1,60 .063 - - - - 0,1 .004
KDMT10004ERGC 2 25,40 1.000 4,0 .157 4,0 .157 3,18 .125 - - - - 0,1 .004
DIE & MOLD
SLOTTING / HELICAL
Order example:
1x KDMT0500R512A050SN
10 x KDMT05002ERGN
B110
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KDMT Finishing Mills
KDMT Screw-On Mills and End Mills with Carbide Shank
NEW
End Mills – Necked
Steel Shank
End Mills – Necked
Carbide Shank
D1
D3
D
D1
D
Rε
AP1
L2
L
Rε
AP1
L2
D3
L
INSERTS
inch
D1
Necked End Mills
Order
number
ANSI
Catalog
number new
Number
of
Flutes
Cylindrical
Shank
D D3 L L2 AP1 Insert
Clamping
Screw
.500 - KDMT0500R512A050SN 2 .500 .413 5.118 .500 .551 KDM.0500... 193.393 FT20
.500 - KDMT0500R591A050SN 2 .500 .413 5.906 .500 .551 KDM.0500... 193.393 FT20
.625 - KDMT0625R551A063SN 2 .625 .551 5.512 .625 .630 KDM.0625... 193.392 FT20
.625 - KDMT0625R630A063SN 2 .625 .551 6.299 .625 .630 KDM.0625... 193.392 FT20
.750 - KDMT0750R630A075SN 2 .750 .709 6.299 .750 .709 KDM.0750... 193.391 FT20
.750 - KDMT0750R827A075SN 2 .750 .709 8.268 .750 .709 KDM.0750... 193.391 FT20
1.000 - KDMT1000R630A100SN 2 1.000 .882 6.299 1.000 .925 KDM.1000... 193.390 KT30
1.000 - KDMT1000R748A100SN 2 1.000 .882 7.480 1.000 .925 KDM.1000... 193.390 KT30
1.000 - KDMT1000R906A100SN 2 1.000 .882 9.550 1.000 .925 KDM.1000... 193.390 KT30
Torx
Key
FACE MILLING
inch
D1
Necked End Mills, Carbide Shank
with Through Coolant
Order
number
ANSI
Catalog
number new
Number
of
Flutes
Cylindrical
Shank
D D3 L L2 AP1 Insert
Clamping
Screw
.500 2878452 KDMT0500R472A050HNC 2 .500 .413 4.724 .500 .551 KDM.0500... 193.393 FT20
.500 2878733 KDMT0500R630A050HNC 2 .500 .413 6.299 .500 .551 KDM.0500... 193.393 FT20
.625 2878734 KDMT0625R551A063HNC 2 .625 .551 5.512 .625 .630 KDM.0625... 193.392 FT20
.625 2878735 KDMT0625R689A063HNC 2 .625 .551 6.890 .625 .630 KDM.0625... 193.392 FT20
.750 2878736 KDMT0750R551A075HNC 2 .750 .709 5.512 .750 .709 KDM.0750... 193.391 FT20
.750 2878737 KDMT0750R748A075HNC 2 .750 .709 7.480 .750 .709 KDM.0750... 193.391 FT20
1.000 2878738 KDMT1000R630A100HNC 2 1.000 .882 6.299 1.000 .925 KDM.1000... 193.390 KT30
1.000 2878739 KDMT1000R827A100HNC 2 1.000 .882 8.268 1.000 .925 KDM.1000... 193.390 KT30
Torx
Key
MILLING
END MILLING
DIE & MOLD
SLOTTING / HELICAL
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B111

KDMB /KDMT
Application Data
INSERTS
m/min ft/min
300 1000
Cutting speed (Vc) – feet/min
240
180
120
60
800
600
400
200
Steel Milling Grades
KC515M E
KC530M E
Coolant
KC530M
▼ E
▼▼
KC515M
▼▼ E
▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
650
200
850
260
chipload
Fz
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.006 580 .004 400 .004
0,15 170 0,10 120 0,10
.006
0,15
350HB or High
Alloy content
(15-5, 17-4
stainless, P20)
0
0
Dry preferred Wet, reduce speed by 25%
0 .002 .004
0,05 0,10
.006
0,15
Chipload (fz) – ipt
.008
0,20
inch
mm
FACE MILLING
END MILLING
MILLING
Cutting speed (Vc) – feet/min
m/min
270
240
210
180
150
120
90
60
30
0
ft/min
900
800
700
600
500
400
300
200
100
0
Stainless Steel Milling Grades
KC515M E
KC530M E
Coolant
KC515M
▼▼ E
▼▼▼
KC530M
▼▼ E
▼▼▼
speed
Vc
Starting ft/min
operating
conditions m/min
800
240
500
150
chipload
Fz
Austenitic
(304, 316)
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.003 700 .003 660 .006
0,10 210 0,10 200 0,15
.003 400 .003 350 .002
0,10 120 0,10 110 0,05
Ferritic /
Martensitic
135-330 HB
Ferritic /
Martensitic
330-450 HB
Dry preferred Wet, reduce speed by 25%
0
.002
0,05
.004
0,10
.006
0,15
Chipload (fz) – ipt
.008
0,20
inch
mm
SLOTTING / HELICAL
DIE & MOLD
Cutting speed (Vc) – feet/min
m/min ft/min
390 1300
320 1200
270 1100
230 1000
180 800
140 600
90 400
50 200
Cast Iron Milling Grades
KC515M E
Coolant
Starting
operating
conditions
KC515M
▼▼ E
▼▼▼
speed
Vc
ft/min
m/min
1200
360
chipload
Fz

KDMB /KDMT
Application Data
Cutting speed (Vc) – feet/min
m/min ft/min
750 2500
680 2250
600 2000
530 1750
450 1500
380 1250
300 1000
Non-Ferrous Milling Grades
K115M F
Coolant
Starting
operating
conditions
K115M
▼▼ F
▼▼▼
speed
Vc
ft/min
m/min
1750
530
chipload
Fz
Free Machining
9%Si
(390,380)
speed
Vc
Copper,
Zinc,
Brass
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch ft/min inch
mm m/min mm m/min mm m/min mm
.009
0,25
1500
450
Dry not recommended
.009
0,25
1100
330
.008
0,20
1750
530
Wet preferred
.010
0,25
Non-Metallics
INSERTS
0 .002 .004
0,05 0,10
Chipload (fz) – ipt
.006
0,15
.008
0,20
inch
mm
Cutting speed (Vc) – feet/min
m/min
110
90
80
60
50
30
20
ft/min
350
300
250
200
150
100
50
High-Temperature Alloys Milling Grades
KC725M E
Coolant
speed
Vc
Starting ft/min
operating
conditions m/min
KC725M
▼▼E
▼▼▼
300
90
chipload
Fz
Titanium
(Ti 6 Al 4 V)
speed
Vc
chipload
Fz
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.002 150 .002 220 .004
0,05 50 0,05 70 0,10
Dry not recommended
Nickel, Cobalt
Alloys (Inconel, Iron Alloys
Hastelloy, (X12NiCrSi3616,
Monel, X2NiCrAlTi3220)
Nimonic)
Wet preferred
FACE MILLING
MILLING
END MILLING
0
0
0
.002
0,05
.004
0,10
Chipload (fz) – ipt
.006
0,15
.008
0,20
inch
mm
Cutting speed (Vc) – feet/min
m/min ft/min
210 700
180 600
150 500
120 400
90 300
60 200
30 100
0 0
Hardened Steels
KC515M E
Coolant
Starting
operating
conditions
KC515M
▼▼ E
▼▼▼
speed
Vc
ft/min
m/min
600
180
chipload
Fz
Hardened
Steel
45 - 52 HRC
speed
Vc
chipload
Fz
Hardened
Steel
53 - 59 HRC
speed
Vc
chipload
Fz
inch ft/min inch ft/min inch
mm m/min mm m/min mm
.003
0,10
500
150
Dry not recommended
.002
0,05
300
90
.002
0,05
Hardened
Steel
60 - 65 HRC
Wet preferred
SLOTTING / HELICAL
DIE & MOLD
0
.002
0,05
.004
0,10
Chipload (fz) – ipt
.006
0,15
.008
0,20
inch
mm
Edge Preparations
S – hone + T-land (heavy)
E – hone (medium)
F – sharp (extra light)
Coolant
Requirements
dry
wet
Operating Conditions
▼ extra heavy – heavy interruption, continuous forging/casting skin, long tool extension
▼▼ heavy – moderate interruption, intermittent skin, moderate tool extension
▼▼▼ medium – light interruption, minimal/limited skin, moderate tool extension
▼▼▼▼ light – no interruption, premachined – no skin, shortest extension
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B113

Tooling Systems Products
Slim Line Hydraulic Chucks
Trend Line Hydraulic Chucks – CV50, Extended
TG Single-Angle Collet Chucks and
Slotting Cutter Adapters – CV50
Shrink Fit System
VDI Driven Tooling
KM25 TM Modular Quick-Change Tooling
C2
C5
C6
C7
C10
C13
To place an order, contact your Kennametal
representative or visit www.kennametal.com.
C1

NEW
Slim Line Hydraulic Chucks
Kennametal’s new Slim Line Hydraulic Chucks
offer an unbeatable combination of advantages:
• Outstanding, consistent accuracy is achieved through state-ofthe-art
manufacturing processes for these extended-length chucks.
• Ideal for all demanding drilling, boring, and reaming applications.
• Greater transmitted grip torques achieved with this new
innovative design.
• Slim profile provides an advantage for sophisticated applications
where tool clearance is an issue and accuracy is essential.
• All chucks are pre-balanced to a high industry standard
(example: KM63 G 2.5 at 25,000 rpm).
Runout
A
B
L1 + 2,5xD
L1
Fields of application
• mold and die makers
• automotive industry
• general machining
• aerospace
D
0,006
0.00023
example for clamping diameter 12 mm (1/2”) at
L1 = 170 mm (6.69”): the maximum runout of 6µm (0.00023”)
is referring to a total length of 200 mm (7.87”)
➚
AB
Gripping force
TORQUE (Nm)
D SLIM CONVENTIONAL
LINE HYDR. CHUCKS
12 mm 115 70
14 mm 160 100
16 mm 180 135
18 mm 190 180
20 mm 220 200
D TORQUE (ft.-lbs.)
1/2” 85 55
3/4” 150 150
C2

Patented radial operated axial tool length adjustment.
Using this function, you can adjust tool length with a key
from the side of the chuck.
• User friendly operation to adjust tool length
• Time saving pre-setting in one operation
• Fine precision adjustment
• Self-locking feature to
maintain preset adjustment
key for tool length
adjustment
range 10 mm (3/8”)
Contour Comparison
Ø 32
Ø 24
Ø 19,5
Ø 12
HSK63A
Ø 31,6
Customized Solutions
Individual customized solutions with many
common interfaces can be delivered on request.
C3

HSK63A
NEW
Hydraulic Chucks – Slim Line
Balanced G2.5 at 15,000 rpm.
Through-the-toolholder coolant capability.
Shank according to DIN 69893-1 / ISO 12164-1.
For direct clamping of tools with straight
shank to DIN 6535 Form HA and HB.
A reducer is recommended for shank
Form HE and HB. To clamp shank
diameters below 12 mm, use reducers.
HSK
D1 D2 D21
L1
V
L2
L9
metric
For metric shanks
HYDRAULIC CHUCKS
HSK-A
inch
Order
number
For inch shanks
Catalog
number
D1 D2 D21 L1 L2 L9 V Kg
Operating
Wrench
63 2458200 HSK63AHCSL12170M 12 19,5 44,5 170 95 36 10 1,3 170.135 5 170.002 2,5 280.047
63 2541833 HSK63AHCSL14170M 14 21,5 52,5 170 95 36 10 1,5 170.135 5 170.002 2,5 280.047
63 2458202 HSK63AHCSL16170M 16 23,5 52,5 170 95 39 10 1,6 170.135 5 170.002 2,5 280.047
63 2541834 HSK63AHCSL18170M 18 25,5 52,5 170 95 39 10 1,6 170.135 5 170.002 2,5 280.047
63 2458203 HSK63AHCSL20170M 20 27,5 52,5 170 95 41 10 1,7 170.135 5 170.002 2,5 280.047
Hex
Adjustment
Wrench
Hex
Operating
Screw
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
HSK-A
Order
number
Catalog
number
D1 D2 D21 L1 L2 L9 V lbs.
63 2508159 HSK63AHCSL050669 1/2 .77 1.75 6.69 3.74 1.42 .39 3.3 170.135 5 170.002 2,5 280.047
63 2508160 HSK63AHCSL075669 3/4 1.08 2.07 6.69 3.74 1.61 .39 3.8 170.135 5 170.002 2,5 280.047
Balanced G2.5 at 15,000 rpm.
Through-the-toolholder coolant capability.
Shank according to DIN 69893-1 / ISO 12164-1.
HSK
L1
V
L21
L2
L9
D1D2 D22 D21
Operating
Wrench
Hex
Adjustment
Wrench
Hex
Operating
Screw
For direct clamping of tools with straight
shank to DIN 6535 Form HA and HB.
A reducer is recommended for shank
Form HE and HB. To clamp shank
diameters below 12 mm, use reducers.
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
metric
HSK-A
Order
number
Catalog
number
D1 D2 D21 D22 L1 L21 L2 L9 V
63 2639015 HSK63AHCSLT06160M 6 13,5 44,5 19,5 160 75 35 27 10
63 2868501 HSK63AHCSLT08160M 8 15,5 44,5 19,5 160 75 35 27 10
63 2638477 HSK63AHCSLT10160M 10 17,5 44,5 17,5 160 75 35 27 10
VDI DRIVEN UNITS
KM25 QUICK-CHANGE SYSTEM
Supplied with stop screw and wrenches.
IMPORTANT: Do not overtighten clamping screw. Torque until full stop is reached with normal hand pressure. Cannot be used in conjuction
with SEFAS chamfering ring.
Coolant supply unit assembly and wrench must be ordered separately; see RCAT03 page D111 or Milling Tooling catalog 3050 page S315.
For reducers, see RCAT03 page D147 or Milling Tooling catalog 3050 page S256.
C4
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Hydraulic Chucks – Slim Line & Trend Line
CV40/CV50
NEW
Balanced G6.3 at 15,000 rpm.
Through-the-toolholder coolant capability.
Shank according to ANSI B5.50.
Slim Line
L1
V
L3
L2
L9
D1 D2 D21
For direct clamping of tools with:
• straight shank to DIN 6535 Form HA
• weldon style DIN 6535 Form HB
up to 20 mm (3/4")
A reducer is recommended for shanks:
• whistle style HE
• weldon style DIN 6535 Form HB over
20 mm (3/4")
metric
For metric shanks
CV
Form B
CV
Form B
Order
number
Order
number
ISO
Catalog number
ANSI
Catalog number
Balanced G6.3 at 15,000 rpm.
Through-the-toolholder coolant capability.
Shank according to ANSI B5.50.
D1 D2 D21 L1 L2 L3 L9 V Kg
D1 D2 D21 L1 L2 L3 L9 V lbs.
Trend Line
V
L9
D1 D2 D21
Operating
Wrench
Operating
Wrench
40 2508153 CV40BHCSL050669 1/2 .77 1.75 6.69 3.94 3.74 1.42 .39 3.75 170.135 5 170.002 2,5 280.047
40 2508154 CV40BHCSL075669 3/4 1.08 2.07 6.69 3.94 3.74 1.61 .39 3.97 170.135 5 170.002 2,5 280.047
50 2508157 CV50BHCSL050787 1/2 .77 2.07 7.87 3.94 3.74 1.42 .39 9.26 170.135 5 170.002 2,5 280.047
50 2508158 CV50BHCSL075787 3/4 1.08 2.07 7.87 3.94 3.74 1.61 .39 9.48 170.135 5 170.002 2,5 280.047
Hex
Adjustment
Wrench
Adjustment
Wrench
Hex
Operating
Screw
40 2495136 CV40BHCSL12M669 12 19,5 44,5 170 100 95 36 10 1,5 170.135 5 170.002 2,5 280.047
40 2495141 CV40BHCSL20M669 20 27,5 52,5 170 100 95 41 10 1,8 170.135 5 170.002 2,5 280.047
50 2508155 CV50BHCSL12M787 12 19,5 44,5 200 100 95 36 10 3,9 170.135 5 170.002 2,5 280.047
50 2508156 CV50BHCSL20M787 20 27,5 52,5 200 100 95 41 10 4,3 170.135 5 170.002 2,5 280.047
inch
For inch shanks
Hex
Hex
Operating
Screw
For direct clamping of tools with:
• straight shank to DIN 6535 Form HA
• weldon style DIN 6535 Form HB
up to 20 mm (3/4")
A reducer is recommended for shanks:
• whistle style HE
• weldon style DIN 6535 Form HB over
20 mm (3/4")
HYDRAULIC CHUCKS
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
L1
L2
metric
CV
Form B
Order
number
ISO
Catalog number
D1 D2 D21 L1 L2 L9 V Kg
Operating
Wrench
50 2452778 CV50BHCT06M600 6 25,7 63 152,4 100 27 10 3,68 170.135 5 170.003 3 280.046
50 2452779 CV50BHCT08M600 8 27,7 63 152,4 100 27 10 3,73 170.135 5 170.003 3 280.046
50 2452780 CV50BHCT10M600 10 29,7 63 152,4 100 31 10 3,80 170.135 5 170.003 3 280.046
50 2452781 CV50BHCT12M600 12 31,6 63 152,4 100 36 10 3,85 170.135 5 170.135 5 280.046
50 2452782 CV50BHCT14M600 14 33,6 63 152,4 100 36 10 3,92 170.135 5 170.135 5 280.046
50 2453233 CV50BHCT16M600 16 37,6 63 152,4 100 39 10 4,08 170.135 5 170.135 5 280.046
50 2453234 CV50BHCT18M600 18 39,6 63 152,4 100 39 10 4,15 170.135 5 170.135 5 280.046
50 2453235 CV50BHCT20M600 20 41,6 63 152,4 100 41 10 4,23 170.135 5 170.135 5 280.046
inch
CV
Form B
For metric shanks
For inch shanks
Order
number
ANSI
Catalog number
D1 D2 D21 L1 L2 L9 V lbs.
Supplied with operating screw, axial adjusting mechanism, and wrenches.
IMPORTANT: Do not overtighten clamping screw. Torque until full stop is reached with normal hand pressure.
See RCAT03 page D111 or Milling Tooling catalog 3050 page S315.
For reducers, see RCAT03 page D147 or Milling Tooling catalog 3050 page S256.
Operating
Wrench
To place an order, contact your Kennametal representative or visit www.kennametal.com.
Hex
Adjustment
Wrench
Adjustment
Wrench
Hex
Operating
Screw
Operating
Screw
50 2452210 CV50BHCT025600 1/4 1.01 2.48 6 3.94 1.06 .39 8.11 170.135 5 170.003 3 280.046
50 2452774 CV50BHCT038600 3/8 1.17 2.48 6 3.94 1.22 .39 8.38 170.135 5 170.003 3 280.046
50 2452775 CV50BHCT050600 1/2 1.24 2.48 6 3.94 1.42 .39 8.49 170.135 5 170.135 5 280.046
50 2452776 CV50BHCT062600 5/8 1.48 2.48 6 3.94 1.54 .39 8.99 170.135 5 170.135 5 280.046
50 2452777 CV50BHCT075600 3/4 1.64 2.48 6 3.94 1.61 .39 9.35 170.135 5 170.135 5 280.046
Hex
Hex
C5
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
VDI DRIVEN UNITS
KM25 QUICK-CHANGE SYSTEM

HSK40A/CV50
TG Single-Angle Collet Chucks
HSK40A TG
HSK
Collet
capacity
D11
Collet Chuck
Balanced G6.3 at 15,000 rpm.
Through-the-toolholder coolant capability.
Shank according to DIN 69893-1/
ISO 12164-1.
V
L1
L9
metric
Order ISO
Collet
Collet
Capacity
HSK-A number Catalog number Series min. max. D11 L1 L9 V Kg Locknut Nm Wrench
40 2455912 HSK40ATG050080M 50TG 1,1 13,5 38,0 80 42 5 0,45 LNA050M 80-100 HSW34M SS056041G 4
40 2455993 HSK40ATG075090M 75TG 2,6 20,0 50,0 90 54 7 0,69 LNA075M 110-135 HSW45M SS081041G 4
Stop
Screw
Nm
HYDRAULIC CHUCKS
Supplied with locknut and stopscrew.
IMPORTANT: Do not overtighten locknut; use torque recommendations above.
Coolant supply unit assembly and wrench must be ordered separately; see RCAT.03 page D111 or Milling Tooling catalog 3050 page S315.
For collets, see RCAT.03 pages D125-D128 or Milling Tooling catalog 3050 page S260.
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
Slotting Cutter Adapters
CV40/CV50
Slotting Cutter Adapter
Shank according to ANSI B5.50
D1 D2
L1
L13
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
VDI DRIVEN UNITS
inch
CV
Order
number
ANSI
Catalog number
D1 D2 L1 L13 lbs.
50 1261878 CV50SA062400 5/8 1.25 4 .780 10.70 KLS07 45 1/4 SDK062088
50 1026217 CV50SA100400 1 1.61 4 .937 11.70 KLS10 100 5/16 SDK100106
50 2461123 CV50SA100600 1 1.61 6 .937 11.57 KLS10 100 5/16 SDK100106
50 2461124 CV50SA125400 1 1/4 1.86 4 1.094 9.54 KLS12 150 5/16 SDK125119
50 1026218 CV50SA125600 1 1/4 1.86 6 1.094 15.50 KLS12 150 5/16 SDK125119
50 2461125 CV50SA150400 1 1/2 2.11 4 1.698 10.32 KLS15 200 3/8 SDK150175
50 1026223 CV50SA150600 1 1/2 2.11 6 1.698 16.00 KLS15 200 3/8 SDK150175
50 1026244 CV50SA200600 2 2.75 6 1.698 17.20 KLS20 220 9/16 SDK200169
Supplied with lock screw and drive key.
IMPORTANT: Do not overtighten lock screw; use torque recommendations above.
Lock
Screw
ft.
lbs.
Hex
Drive
Key
KM25 QUICK-CHANGE SYSTEM
C6
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KM63UT
Shrink Fit Chucks
TT Shrink Fit Chucks
Balance Quality G 2,5 at 15000 min -1
4,5°
D
D1 D2
L1
V
L9
metric
D
Order
number
ISO
Catalog number
D1
D2 L1 L9 V
Kg
63 2425406 KM63UTTT06080M 6 20 80 26 10 0,85 TTSS05018M 2,5 170.002
63 2425407 KM63UTTT08080M 8 20 80 26 10 0,84 TTSS06020M 3 170.003
63 2425408 KM63UTTT10090M 10 24 90 32 10 0,97 TTSS08020M 4 170.004
63 2425409 KM63UTTT12090M 12 24 90 37 10 0,96 TTSS08020M 4 170.004
63 2425410 KM63UTTT14100M 14 27 100 37 10 1,08 TTSS08020M 4 170.004
63 2425411 KM63UTTT16100M 16 27 100 40 10 1,05 TTSS12020M 6 170.006
63 2425412 KM63UTTT18100M 18 33 100 40 10 1,27 TTSS12020M 6 170.006
63 2425433 KM63UTTT20100M 20 33 100 42 10 1,23 TTSS16020M 8 170.008
63 2425434 KM63UTTT25120M 25 44 120 48 10 1,96 TTSS16020M 8 170.008
63 2425435 KM63UTTT32120M 32 44 120 48 10 1,82 TTSS16020M 8 170.008
Stop
Screw
Hex
Tool
for Length
Adjustment
HYDRAULIC CHUCKS
inch
D
Order
number
ANSI
Catalog number
D1
D2 L1 L9 V
Ibs.
63 2425436 KM63UTTT025315 1/4 .787 3.150 1.027 .39 1.87 TTSS05018M 2,5 170.002
63 2425437 KM63UTTT031315 5/16 .787 3.150 1.027 .39 1.87 TTSS06020M 3 170.003
63 2425438 KM63UTTT038335 3/8 .945 3.346 1.264 .39 2.09 TTSS08020M 4 170.004
63 2425439 KM63UTTT044354 7/16 .945 3.542 1.460 .39 2.12 TTSS08020M 4 170.004
63 2425440 KM63UTTT050354 1/2 .945 3.542 1.460 .39 2.09 TTSS08020M 4 170.004
63 2425441 KM63UTTT056354 9/16 1.063 3.542 1.460 .39 2.20 TTSS08020M 4 170.004
63 2425442 KM63UTTT062374 5/8 1.063 3.740 1.579 .39 2.25 TTSS12020M 6 170.006
63 2425443 KM63UTTT068374 11/16 1.299 3.740 1.579 .39 2.71 TTSS12020M 6 170.006
63 2425444 KM63UTTT088394 3/4 1.299 3.938 1.657 .39 2.76 TTSS16020M 8 170.008
63 2425445 KM63UTTT100453 7/8 1.299 3.938 1.657 .39 2.65 TTSS16020M 8 170.008
63 2425446 KM63UTTT125472 1 1.732 4.528 1.893 .39 4.12 TTSS16020M 8 170.008
63 2425447 KM63UTTT075394 1 1/4 1.732 4.725 1.893 .39 4.03 TTSS16020M 8 170.008
Stop
Screw
Hex
Tool
for Length
Adjustment
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
Cutting Tool
Shank Requirements
metric (ISO Standard)
Cutting Tool
Shank Diameters Tolerance (mm)
6 h6 0,000/ -0,008
8 & 10 h6 0,000/-0,009
12, 14, 16, & 18 h6 0,000/-0,011
20 & 25 h6 0,000/-0,013
32, 40 & 50 h6 0,000/-0,016
Cutting Tool
Shank Diameters
Cutting Tool
Shank Requirements
inch (Industry Standard)
Tolerance (inch)
1/4, 5/16, & 3/8 -.0001/-.0004
7/16, 1/2, 9/16, 5/8, & 11/16 .0000/-.0004
3/4, 7/8, 1, 1 1/4, 1 1/2 & 2 .0000/-.0005
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
KM63UT Standard System for:
• manual and automatic tool change
• manual and automatic KM63 clamping units
• multitasking machines
not compatible with KM63XMZ/…XMS applications
VDI DRIVEN UNITS
To place an order, contact your Kennametal representative or visit www.kennametal.com.
C7
KM25 QUICK-CHANGE SYSTEM

KM63XMZ
Shrink Fit Chucks
TT Shrink Fit Chucks
Balance Quality G 2,5 at 15.000 min -1
D
D1 D2
L1
V
L9
metric
HYDRAULIC CHUCKS
D
Order
number
ISO
Catalog number
D1
D2 L1 L9 V
Kg
Stop
Screw
Hex
Tool
for Length
Adjustment
63 2419022 KM63XMZTT04080MY 4 20 80 15 10 0,68 TTSS05018M 2,5 170.002
63 2419001 KM63XMZTT06080MY 6 20 80 26 10 0,85 TTSS05018M 2,5 170.002
63 2419002 KM63XMZTT08080MY 8 20 80 26 10 0,84 TTSS06020M 3 170.003
63 2419003 KM63XMZTT10090MY 10 24 90 32 10 0,97 TTSS08020M 4 170.004
63 2419004 KM63XMZTT12090MY 12 24 90 37 10 0,96 TTSS08020M 4 170.004
63 2419005 KM63XMZTT14100MY 14 27 100 37 10 1,08 TTSS08020M 4 170.004
63 2419006 KM63XMZTT16100MY 16 27 100 40 10 1,05 TTSS12020M 6 170.006
63 2419007 KM63XMZTT18100MY 18 33 100 40 10 1,27 TTSS12020M 6 170.006
63 2419008 KM63XMZTT20100MY 20 33 100 42 10 1,23 TTSS16020M 8 170.008
63 2419009 KM63XMZTT25120MY 25 44 120 48 10 1,96 TTSS16020M 8 170.008
63 2419010 KM63XMZTT32120MY 32 44 120 48 10 1,82 TTSS16020M 8 170.008
VDI DRIVEN UNITS
SHRINK FIT ADAPTERS
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
TOOLING SYSTEMS
inch
D
Order
number
ANSI
Catalog number D1 D2 L1 L9 V
Ibs.
63 2419011 KM63XMZTT025315Y 1/4 .787 3.150 1.023 .39 1.87 TTSS05018M 2,5 170.002
63 2419012 KM63XMZTT031315Y 5/16 .787 3.150 1.027 .39 1.87 TTSS06020M 3 170.003
63 2419013 KM63XMZTT038335Y 3/8 .945 3.346 1.264 .39 2.09 TTSS08020M 4 170.004
63 2419014 KM63XMZTT044354Y 7/16 .945 3.542 1.460 .39 2.12 TTSS08020M 4 170.004
63 2419015 KM63XMZTT050354Y 1/2 .945 3.542 1.460 .39 2.09 TTSS08020M 4 170.004
63 2419016 KM63XMZTT056354Y 9/16 1.063 3.542 1.460 .39 2.20 TTSS08020M 4 170.004
63 2419017 KM63XMZTT062374Y 5/8 1.063 3.740 1.579 .39 2.25 TTSS12020M 6 170.006
63 2419018 KM63XMZTT068374Y 11/16 1.299 3.740 1.579 .39 2.71 TTSS12020M 6 170.006
63 2419023 KM63XMZTT075394Y 3/4 1.299 3.938 1.657 .39 2.76 TTSS16020M 8 170.008
63 2419019 KM63XMZTT088394Y 7/8 1.299 3.938 1.657 .39 2.65 TTSS16020M 8 170.008
63 2419020 KM63XMZTT100453Y 1 1.732 4.528 1.893 .39 4.12 TTSS16020M 8 170.008
63 2419021 KM63XMZTT125472Y 1 1/4 1.732 4.725 1.893 .39 4.03 TTSS16020M 8 170.008
Cutting Tool
Shank Diameters
Cutting Tool
Shank Requirements
metric (ISO Standard)
Tolerance (mm)
6 h6 0,000/ -0,008
8 & 10 h6 0,000/-0,009
12, 14, 16, & 18 h6 0,000/-0,011
20 & 25 h6 0,000/-0,013
32, 40 & 50 h6 0,000/-0,016
Cutting Tool
Shank Diameters
Cutting Tool
Shank Requirements
inch (Industry Standard)
Tolerance (inch)
1/4, 5/16, & 3/8 -.0001/-.0004
7/16, 1/2, 9/16, 5/8, & 11/16 .0000/-.0004
3/4, 7/8, 1, 1 1/4, 1 1/2 & 2 .0000/-.0005
KM63XMZ for:
• automatic tool change on multitasking machines
• Mazak Integrex Y/SY series machines
Stop
Screw
Hex
Tool
for Length
Adjustment
KM25 QUICK-CHANGE SYSTEM
C8
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KM63XMS
Shrink Fit Chucks
TT Shrink Fit Chucks
Balance Quality G 2,5 at 15000 min -1
D
D1 D2
L1
V
L9
metric
D
Order
number
ISO
Catalog number
D1
D2 L1 L9 V
Kg
63 2418949 KM63XMSTT06080M 6 20 80 26 10 0,85 TTSS05018M 2,5 170.002
63 2418950 KM63XMSTT08080M 8 20 80 26 10 0,84 TTSS06020M 3 170.003
63 2418951 KM63XMSTT10090M 10 24 90 32 10 0,97 TTSS08020M 4 170.004
63 2418952 KM63XMSTT12090M 12 24 90 37 10 0,96 TTSS08020M 4 170.004
63 2418983 KM63XMSTT14100M 14 27 100 37 10 1,08 TTSS08020M 4 170.004
63 2418984 KM63XMSTT16100M 16 27 100 40 10 1,05 TTSS12020M 6 170.006
63 2418985 KM63XMSTT18100M 18 33 100 40 10 1,27 TTSS12020M 6 170.006
63 2418986 KM63XMSTT20100M 20 33 100 42 10 1,23 TTSS16020M 8 170.008
63 2418987 KM63XMSTT25120M 25 44 120 48 10 1,96 TTSS16020M 8 170.008
63 2418988 KM63XMSTT32120M 32 44 120 48 10 1,82 TTSS16020M 8 170.008
Stop
Screw
Hex
Tool
for Length
Adjustment
HYDRAULIC CHUCKS
inch
D
Order
number
ANSI
Catalog number D1 D2 L1 L9 V
Ibs.
63 2418989 KM63XMSTT025315 1/4 .787 3.150 1.023 .39 1.87 TTSS05018M 2,5 170.002
63 2418990 KM63XMSTT031315 5/16 .787 3.150 1.027 .39 1.87 TTSS06020M 3 170.003
63 2418991 KM63XMSTT038335 3/8 .945 3.346 1.264 .39 2.09 TTSS08020M 4 170.004
63 2418992 KM63XMSTT044354 7/16 .945 3.542 1.460 .39 2.12 TTSS08020M 4 170.004
63 2418993 KM63XMSTT050354 1/2 .945 3.542 1.460 .39 2.09 TTSS08020M 4 170.004
63 2418994 KM63XMSTT056354 9/16 1.063 3.542 1.460 .39 2.20 TTSS08020M 4 170.004
63 2418995 KM63XMSTT062374 5/8 1.063 3.740 1.579 .39 2.25 TTSS12020M 6 170.006
63 2418996 KM63XMSTT068374 11/16 1.299 3.740 1.579 .39 2.71 TTSS12020M 6 170.006
63 2418997 KM63XMSTT088394 3/4 1.299 3.938 1.657 .39 2.76 TTSS16020M 8 170.008
63 2418998 KM63XMSTT100453 7/8 1.299 3.938 1.657 .39 2.65 TTSS16020M 8 170.008
63 2418999 KM63XMSTT125472 1 1.732 4.528 1.893 .39 4.12 TTSS16020M 8 170.008
63 2419000 KM63XMSTT075394 1 1/4 1.732 4.725 1.893 .39 4.03 TTSS16020M 8 170.008
Cutting Tool
Shank Diameters
Cutting Tool
Shank Requirements
metric (ISO Standard)
Tolerance (mm)
6 h6 0,000/ -0,008
8 & 10 h6 0,000/-0,009
12, 14, 16, & 18 h6 0,000/-0,011
20 & 25 h6 0,000/-0,013
32, 40 & 50 h6 0,000/-0,016
Cutting Tool
Shank Diameters
Cutting Tool
Shank Requirements
inch (Industry Standard)
Tolerance (inch)
1/4, 5/16, & 3/8 -.0001/-.0004
7/16, 1/2, 9/16, 5/8, & 11/16 .0000/-.0004
3/4, 7/8, 1, 1 1/4, 1 1/2 & 2 .0000/-.0005
Stop
Screw
Hex
Tool
for Length
Adjustment
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
KM63XMS for automatic tool change
on multitasking machines
• Mori Seiki MT-series
• Takisawa TMM250
• Nakamura Tome STW40
• Tsugami TMA 6/8
To place an order, contact your Kennametal representative or visit www.kennametal.com.
C9
VDI DRIVEN UNITS
KM25 QUICK-CHANGE SYSTEM

VDI Driven Tooling
NEW
76
Ø 16
38
63
65 53
Ø 92
80
Ø 40 H6
41 41
51 63
L1 L2
L1 L2
Ø 40 H6
76
L2
L1
53
63
metric
HYDRAULIC CHUCKS
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
VDI
Size
VS40 2447636 VS40DTAER32Z78MST82EC 76 65 ER32 50 4500 1:1 - 50 bar VDI 40 DIN 5482 B17 x 14
VS40 2447637 VS40DTAER32Z83MST82EIC 81 65 ER32 50 4500 1:1 50 bar VDI 40 DIN 5482 B17 x 14
VS40 2447638 VS40DTAKM40Z92MST82EIC 92 65 KM40 50 4500 1:1 50 bar VDI 40 DIN 5482 B17 x 14
metric
VDI
Size
Order
number
Order
number
Catalog
number
Catalog
number
L1 L2 Spindle
L1 L2 Spindle
max.
Nm
max.
n Ratio EC IC
max.
Coolant
Press. Shank Drive
VS40 2447639 VS40DTRER32X71Z65MST82EC 71 53 ER32 70 6000 1:1 - 70 bar VDI 40 DIN 5482 B17 x 14
VS40 2447640 VS40DTRKM40X18Z65MST82EIC 24 111 KM40 70 6000 1:1 70 bar VDI 40 DIN 5482 B17 x 14
96
Ø 92
Ø 40 H6
max.
Nm
max.
n Ratio EC IC
76
Ø 16
41 41
51 58
L1 L2
max.
Coolant
Press. Shank Drive
L1 L2
38
75
100 63
Drive
Size
Drive
Size
Ø 40 H6
76
L2
L1
63
75 -0,5
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
metric
VDI
Size
Order
number
Catalog
number
L1 L2 Spindle
max.
Nm
max.
n Ratio EC IC
max.
Coolant
Press. Shank Drive
VS40 2447641 VS40DTAER32Z78MST80EC 76 65 ER32 50 4500 1:1 - 50 bar VDI 40 DIN 5480 W20 x 0,8 x 30 x 18
VS40 2447642 VS40DTAER32Z83MST80EIC 81 65 ER32 50 4500 1:1 50 bar VDI 40 DIN 5480 W20 x 0,8 x 30 x 18
VS40 2447763 VS40DTAKM40Z92MST80EIC 92 65 KM40 50 4500 1:1 50 bar VDI 40 DIN 5480 W20 x 0,8 x 30 x 18
Drive
Size
metric
VDI DRIVEN UNITS
VDI
Size
Order
number
Catalog
number
L1 L2 Spindle
max.
Nm
max.
n Ratio EC IC
max.
Coolant
Press. Shank Drive
VS40 2447764 VS40DTRER32X71Z65MST80EC 71 50 ER32 70 6000 1:1 - 70 bar VDI 40 DIN 5480 W20 x 0,8 x 30 x 18
VS40 2447765 VS40DTRKM40X18Z65MST80EIC 26 111 KM40 70 6000 1:1 70 bar VDI 40 DIN 5480 W20 x 0,8 x 30 x 18
Drive
Size
KM25 QUICK-CHANGE SYSTEM
C10
To place an order, contact your Kennametal representative or visit www.kennametal.com.

VDI Driven Tooling
Ø 106
88
Ø 22
40
93
75 78
96
88
L1
L2
78
93
Ø 50 H6
50 50
63 70
L2
L1
Ø 50 H6
metric
VDI
Size
VS50 2447766 VS50DTAER40Z89MST82EC 87 70 ER40 100 3500 1:1 - 50 bar VDI 50 DIN 5482 B20x17
VS50 2447767 VS50DTAER40Z94MST82EIC 92 70 ER40 100 3500 1:1 50 bar VDI 50 DIN 5482 B20x17
VS50 2447768 VS50DTAKM50Z102MST82EIC 102 70 KM50 100 3500 1:1 50 bar VDI 50 DIN 5482 B20x17
metric
VDI
Size
Order
number
Order
number
Catalog
number
Catalog
number
L1 L2 Spindle
L1 L2 Spindle
VS50 2447769 VS50DTRER40X82Z65MST82EC 81,5 63 ER40 100 4000 1:1 - 70 bar VDI 50 DIN 5482 B20x17
VS50 2447770 VS50DTRKM50X82Z65MST82EIC 25 148 KM50 100 4000 1:1 70 bar VDI 50 DIN 5482 B20x17
max.
Nm
max.
Nm
Description:
VS ... VDI Shank – DIN 69880
40 ... nom. Diameter (30, 40, 50, ... ) for back end
DT ... Driven Tool
R ... Version (A = straight, R/L-hand, W-angle, ... )
KM40 ... front end ( KM40, ER32, ... )
X71 ... X-coordinate Dim
Z90 ... Z-coordinate Dim.
M ... metric
ST82 ... Sauter Activation (82 = DIN5482, 80 = DIN5480)
IC ... Coolant Supply (IC = internal, EC = external, EIC = external-internal)
ER = collet chucks DIN 6388
max.
n Ratio EC IC
max.
n Ratio EC IC
max.
Coolant
Press. Shank Drive
max.
Coolant
Press. Shank Drive
Drive
Size
Drive
Size
HYDRAULIC CHUCKS
VDI DRIVEN UNITS
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
To place an order, contact your Kennametal representative or visit www.kennametal.com.
C11
KM25 QUICK-CHANGE SYSTEM

C12
To place an order, contact your Kennametal
representative or visit www.kennametal.com.

KM25 TM Modular Quick-Change Tooling
KM25 Clamping Units
KM25 KENLOC
KM25 SCREW-ON
KM25 TOP NOTCH Thread and Groove
KM25 A3 Deep Groove & Cut-Off
KM25 A4 Groove & Turn
KM25 Modular Cut-Off
KM25 LT Threading
KM25 Accessories
KM3225 Clamping Units
KM3225 Boring Bar Adapter
KM3225 KENLOC
KM3225 KENLEVER
KM3225 A3 & A4
KM3225 TOP NOTCH
KM3225 LT Threading
KM3225 Collet Chucks
KM3225 Blank
Technical Information
C15
C16
C23
C27
C28
C29
C30
C31
C32
C34
C36
C37
C42
C44
C45
C45
C46
C46
C48
NEW
• most economical modular quick-change
tooling system available
• reduces downtime, increases productivity
• replaces conventional square-shank tooling
• ideal for machines up to 30 hp (22kW)
C13

Modular Quick-
Change Tooling
THREE-
YEAR
SAVINGS
KM25 Calculation Conventional KM25 Quick-
Example
Change
No. of set-ups per shift 1 1
No. of tools per set-up 6 6
No. per tool for set-up (mins.) 5 0.5
No. of insert indexes per shift 6 6
Insert indexing time (mins.) 5 0.5
No. of measuring cuts per shift 6 0*
Measuring cut time (mins.) 5 5
No. of shifts per year 240** 240**
Minimum cost per hour (U.S.$) 75 75
Opening Balance
Investment
Savings 84 min. x 240 x 75
60
Closing Balance
Result Conventional KM25 Quick- SAVINGS PER
Change
SHIFT (mins.)
Total set-up time/shift (mins.) 30 3 27
Total insert indexing time (mins.) 30 3 27
Total measuring cut time (mins.) 30 0 30
TOTAL TIME 90 6 84
*Pre-gaged off line.
**Based on one shift a day. All figures in U.S. Dollars.
YEAR ONE
0
$1,650
$25,200
$23,550
YEAR TWO
$23,550
0
$25,200
$48,750
YEAR THREE
$48,750
0
$25,200
$73,950
100
80
60
40
20
0
Total Set-Up
Time / Shift
THREE-YEAR SAVINGS WITH KM... $73,950.00!
Total Insert Indexing
Time (minutes)
Total Measuring
Cut Time (minutes)
Total Time
Conventional
KM Quick-Change
Saving /Shift (mins.)
OD Tooling
ID Tooling
C14

KM
KM25 Clamping Units – KENLOC
H1
H
D1
F
B
L1
metric
System
Size
Order
number
Catalog
number
D1
L1 B F H H1
mm mm inch mm inch mm inch mm inch mm inch
Spare Parts
Package
KM25 2277879 KM25NCM2525120 25 120 4.724 25 .984 16 .630 25 .984 12,5 .492 KM25NOPKG
inch
System
Size
Order
number
Catalog
number
D1
mm
L1 B F H H1
mm inch mm inch mm inch mm inch mm inch
Spare Parts
Package
Right hand
KM25 2385942 KM25RCM16382 25 97 3.819 25,4 1.000 16 .630 25,4 1.000 12,9 .508 KM25NOPKG
KM25 2386034 KM25RCM16482 25 122,4 4.819 25,4 1.000 16 .630 25,4 1.000 12,9 .508 KM25NOPKG
Left hand
KM25 2386033 KM25LCM16382 25 97 3.819 25,4 1.000 16 .630 25,4 1.000 12,9 .508 KM25NOPKG
KM25 2265206 KM25LCM16482 25 122,4 4.819 25,4 1.000 16 .630 25,4 1.000 12,9 .508 KM25NOPKG
H2
H3
D
D1
HYDRAULIC CHUCKS
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
Clamping
Unit Flange
System
Size
Order
number
Catalog
number
D1
mm
D L L1 B2 B1 H2 H3
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
Spare Parts
Package
KM25 2386035 KM25NCMSF3140 25 24 .945 28 1.102 20 .787 31 1.220 15,5 .610 39 1.535 19,5 .767 KM25NRPKG
B2
B1
L1
L
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
Note: A torque wrench must be used to achieve required clamping force. See page C33.
Spare Parts
Package
Hex Tightening Torque
KM25NOPKG 6 mm 25 - 30 ft.-lbs./ 34 - 40 Nm
KM25NRPKG 6 mm 25 - 30 ft.-lbs./ 34 - 40 Nm
14,5 0,10
(.571 .004)
10,5 0,10
(.413 .004)
A
Flange Mounting Details
A-A
B
M6x1,0
B
24,02 0,03
(.946 .001)
B-B
15,00
(.591)
18,00
(.709)
VDI DRIVEN UNITS
15,75 0,025
(.620 .001)
5,05 0,025
(.199 .008)
8,50
(.335)
10,00
(.394)
To place an order, contact your Kennametal representative or visit www.kennametal.com.
A
C15
KM25 QUICK-CHANGE SYSTEM

KM
KM25 Cutting Units – KENLOC
MCKN 75°
H1
F
75°
D
5°
L1
5°
HYDRAULIC CHUCKS
System
Size
Order
number
Catalog
number
D
L1 F H1 Insert
mm mm inch mm inch mm inch
ISO
Right hand
KM25 2398793 KM25MCKNR1230 25 30 1.181 16 .630 12,5 .492 CNMG120408 CNMG432
Left hand
KM25 2398794 KM25MCKNL1230 25 30 1.181 16 .630 12,5 .492 CNMG120408 CNMG432
MCLN 95°
H1
ANSI
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
System
Size
Order
number
Catalog
number
D
mm
F
5° 95°
L1
5°
Right hand
KM25 2265207 KM25MCLNR1230 25 30 1.181 16 .630 12,5 .492 CNMG120408 CNMG432
Left hand
KM25 2398795 KM25MCLNL1230 25 30 1.181 16 .630 12,5 .492 CNMG120408 CNMG432
MCRN 75°
L1 F H1
mm inch mm inch mm inch
H1
D
ISO
Insert
ANSI
5°
F
D
5°
75°
L1
VDI DRIVEN UNITS
KM25 QUICK-CHANGE SYSTEM
System
Size
Order
number
Catalog
number
D
mm
Right hand
KM25 2398796 KM25MCRNR1230 25 30 1.181 16 .630 12,5 .492 CNMG120408 CNMG432
Left hand
KM25 2398797 KM25MCRNL1230 25 30 1.181 16 .630 12,5 .492 CNMG120408 CNMG432
Spare
Parts
ISO
CNMG120408 CNMG432 ICSN433 KLM4615IP CKM20LP STCM1115IP K15IP 15IP
C16
Insert
L1 F H1
mm inch mm inch mm inch
ANSI Shim Lock Pin Clamp
Clamp
Screw
Wrench
To place an order, contact your Kennametal representative or visit www.kennametal.com.
ISO
Torx
Size
Insert
ANSI

KM
KM25 Cutting Units – KENLOC
MDJN 93°
H1
5°
5°
F
93°
L1
D
System
Size
Order
number
Catalog
number
D
mm
Right hand
KM25 2398798 KM25MDJNR150430 25 30 1.181 16 .630 12,5 .492 DNMG150408 DNMG432
Left hand
KM25 2398799 KM25MDJNL150430 25 30 1.181 16 .630 12,5 .492 DNMG150408 DNMG432
MDPN 62° 30’
L1 F H1
mm inch mm inch mm inch
H1
10°
ISO
Insert
ANSI
HYDRAULIC CHUCKS
F
System Order Catalog
D
L1 F H1
Insert
Size number number
mm mm inch mm inch mm inch
ISO
ANSI
KM25 2398800 KM25MDPNN1130 25 30 1.181 - - 12,5 .492 DNMG110408 DNMG332
62° 30´
L1
D
0°
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
MDQN 107° 30’
7°
H1
107°30´
F
D
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
L1
7°
System
Size
Order
number
Catalog
number
D
mm
L1 F H1
mm inch mm inch mm inch
Right hand
KM25 2398801 KM25MDQNR150430 25 30 1.181 22 .866 12,5 .492 DNMG150408 DNMG432
Left hand
KM25 2398802 KM25MDQNL150430 25 30 1.181 22 .866 12,5 .492 DNMG150408 DNMG432
ISO
Insert
ANSI
VDI DRIVEN UNITS
Spare
Parts
ISO
Insert
ANSI Shim Lock Pin Clamp
Clamp
Screw
Wrench
DNMG110408 DNMG332 IDSN322 KLM34LT9 CKM7LP STCM9T9 FT9 T9
DNMG150408 DNMG432 IDSN442 KLM46L15IP CKM20LP STCM1115IP K15IP 15IP
To place an order, contact your Kennametal representative or visit www.kennametal.com.
Torx
Size
C17
KM25 QUICK-CHANGE SYSTEM

KM
KM25 Cutting Units – KENLOC
MRGN 0°
H1
5°
F
D
L1
5°
HYDRAULIC CHUCKS
System
Size
Order
number
Catalog
number
D
mm
L1 F H1
mm inch mm inch mm inch
Right hand
KM25 2629139 KM25MRGNR0930 25 30 1.181 16 .630 12,5 .492 RNMG090300 RNMG32
KM25 2398803 KM25MRGNR1230 25 30 1.181 22 .866 12,5 .492 RNMG120400 RNMG43
Left hand
KM25 2629140 KM25MRGNL0930 25 30 1.181 16 .630 12,5 .492 RNMG090300 RNMG32
KM25 2398804 KM25MRGNL1230 25 30 1.181 22 .866 12,5 .492 RNMG120400 RNMG43
ISO
Insert
ANSI
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
MSDN 45°
H1 7°
F
D
45° 0°
L1
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
System Order Catalog
D
L1 F H1
Insert
Size number number
mm mm inch mm inch mm inch
ISO
ANSI
KM25 2398805 KM25MSDNN1230 25 30 1.181 - - 12,5 .492 SNMG120408 SNMG432
Spare
Parts
ISO
Insert
ANSI Shim Lock Pin Clamp
Clamp
Screw
Wrench
RNMG090300 RNMG32 IRSN33 KLM34LT9 CKM7LP STCM9T9 FT9 T9
RNMG120400 RNMG43 IRSN43 KLM4615IP CKM20LP STCM1115IP K15IP 15IP
SNMG120408 SNMG432 ISSN433 KLM4615IP CKM20LP STCM1115IP K15IP 15IP
Torx
Size
KM25 QUICK-CHANGE SYSTEM
VDI DRIVEN UNITS
C18
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KM
KM25 Cutting Units – KENLOC
MSKN 75°
H1
F
75°
D
5°
5°
L1
System
Size
Order
number
Catalog
number
D
mm
Right hand
KM25 2398806 KM25MSKNR1230 25 30 1.181 22 .866 12,5 .492 SNMG120408 SNMG432
Left hand
KM25 2398807 KM25MSKNL1230 25 30 1.181 22 .866 12,5 .492 SNMG120408 SNMG432
MSRN 75°
L1 F H1
mm inch mm inch mm inch
H1
ISO
Insert
ANSI
HYDRAULIC CHUCKS
System
Size
Order
number
Catalog
number
D
mm
F
5°
5°
Right hand
KM25 2398808 KM25MSRNR1230 25 30 1.181 13 .512 12,5 .492 SNMG120408 SNMG432
Left hand
KM25 2398809 KM25MSRNL1230 25 30 1.181 13 .512 12,5 .492 SNMG120408 SNMG432
MSSN 45°
75°
L1
L1 F H1
mm inch mm inch mm inch
8°24´
H1
D
ISO
Insert
ANSI
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
F
45°
D
5°30´
L1
System
Size
Order
number
Catalog
number
D
mm
L1 F H1
mm inch mm inch mm inch
Right hand
KM25 2398810 KM25MSSNR1230 25 21,67 .853 16 .630 12,5 .492 SNMG120408 SNMG432
Left hand
KM25 2398811 KM25MSSNL1230 25 21,67 .853 16 .630 12,5 .492 SNMG120408 SNMG432
ISO
Insert
ANSI
VDI DRIVEN UNITS
Spare
Parts
ISO
Insert
ANSI Shim Lock Pin Clamp
Clamp
Screw
Wrench
SNMG120408 SNMG432 ISSN433 KLM4615IP CKM20LP STCM1115IP K15IP 15IP
To place an order, contact your Kennametal representative or visit www.kennametal.com.
Torx
Size
C19
KM25 QUICK-CHANGE SYSTEM

KM
KM25 Cutting Units – KENLOC
MTFN 90°
H1
F 90°
5°
5°
L1
D
HYDRAULIC CHUCKS
System
Size
Order
number
Catalog
number
D
mm
Right hand
KM25 2398812 KM25MTFNR2230 25 30 1.181 16 .630 12,5 .492 TNMG220408 TNMG432
Left hand
KM25 2398813 KM25MTFNL2230 25 30 1.181 16 .630 12,5 .492 TNMG220408 TNMG432
MTGN 90°
L1 F H1
mm inch mm inch mm inch
H1
ISO
Insert
ANSI
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
System
Size
Order
number
Catalog
number
D
mm
5° 90°
L1
5°
F
Right hand
KM25 2398814 KM25MTGNR2230 25 30 1.181 16 .630 12,5 .492 TNMG220408 TNMG432
Left hand
KM25 2398815 KM25MTGNL2230 25 30 1.181 16 .630 12,5 .492 TNMG220408 TNMG432
MTJN 93°
L1 F H1
mm inch mm inch mm inch
H1
D
ISO
Insert
ANSI
F
5° 93°
5° L1
D
VDI DRIVEN UNITS
KM25 QUICK-CHANGE SYSTEM
System
Size
Right hand
KM25 2398816 KM25MTJNR2230 25 30 1.181 16 .630 12,5 .492 TNMG220408 TNMG432
Left hand
KM25 2398817 KM25MTJNL2230 25 30 1.181 16 .630 12,5 .492 TNMG220408 TNMG432
Spare
Parts
ISO
C20
Order
number
Insert
Catalog
number
D
mm
L1 F H1
mm inch mm inch mm inch
ANSI Shim Lock Pin Clamp
Clamp
Screw
Wrench
TNMG220408 TNMG432 ITSN433 KLM4615IP CKM20LP STCM1115IP K15IP 15IP
To place an order, contact your Kennametal representative or visit www.kennametal.com.
ISO
Torx
Size
Insert
ANSI

KM
KM25 Cutting Units – KENLOC
MVJN 93°
H1
F
D
5° 93°
9° L1
System
Size
Order
number
Catalog
number
D
mm
Right hand
KM25 2398818 KM25MVJNR1630 25 30 1.181 16 .630 12,5 .492 VNMG160408 VNMG332
Left hand
KM25 2398819 KM25MVJNL1630 25 30 1.181 16 .630 12,5 .492 VNMG160408 VNMG332
MVUN 93°
L1 F H1
mm inch mm inch mm inch
H1
5°
ISO
Insert
ANSI
HYDRAULIC CHUCKS
System
Size
Order
number
Catalog
number
D
mm
F
93°
Right hand
KM25 2398820 KM25MVUNR1630 25 30 1.181 28,5 1.122 12,5 .492 VNMG160408 VNMG332
Left hand
KM25 2398821 KM25MVUNL1630 25 30 1.181 28,5 1.122 12,5 .492 VNMG160408 VNMG332
MVVN 72° 30’
L1 F H1
mm inch mm inch mm inch
H1
14°
L1
D
9°
ISO
Insert
ANSI
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
F
72°30´
L1
D
0°
System Order Catalog
D
L1 F H1
Insert
Size number number
mm mm inch mm inch mm inch
ISO
ANSI
KM25 2398822 KM25MVVNN1630 25 30 1.181 - - 12,5 .492 VNMG160408 VNMG332
VDI DRIVEN UNITS
Spare
Parts
ISO
Insert
ANSI Shim Lock Pin Clamp
Clamp
Screw
Wrench
VNMG160408 VNMG332 IVSN322 KLM34L9IP - - K20IP T9IP
VNMG160408 VNMG332 IVSN322 KLM34L9IP CKM20LP STCM119IP K20IP T9IP
To place an order, contact your Kennametal representative or visit www.kennametal.com.
Torx
Size
C21
KM25 QUICK-CHANGE SYSTEM

KM
KM25 Cutting Units – KENLOC
MWLN 95°
H1
F
D
5° 95°
5° L1
HYDRAULIC CHUCKS
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
System
Size
Order
number
Catalog
number
D
mm
Right hand
KM25 2398823 KM25MWLNR0830 25 30 1.181 22 .866 12,5 .492 WNMG080408 WNMG432
Left hand
KM25 2398824 KM25MWLNL0830 25 30 1.181 22 .866 12,5 .492 WNMG080408 WNMG432
Spare
Parts
ISO
Insert
L1 F H1
mm inch mm inch mm inch
ANSI Shim Lock Pin Clamp
WNMG 080408 WNMG 432 IWSN433 KLM4615IP CKM20LP STCM1115IP K20IP T15IP
Clamp
Screw
Wrench
ISO
Insert
Torx
Size
ANSI
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
VDI DRIVEN UNITS
TOOLING SYSTEMS
• Unsurpassed global standard Toolholding Systems!
• KM25 – our latest quick-change offering that replaces conventional
25 mm (or 1") square-shank tooling – no machine modifications required!
KM25 QUICK-CHANGE SYSTEM
C22
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KM
KM25 Cutting Units – SCREW ON
SCLC 95°
0°
H1
F
95°
L1
D
0°
System
Size
Order
number
Catalog
number
D
mm
Right hand
KM25 2399472 KM25SCLCR0930 25 30 1.181 16 .630 12,5 .492 CCMT09T308 CCMT3252
KM7425 2399474 KM25SCLCR1230 25 30 1.181 16 .630 12,5 .492 CCMT120408 CCMT432
Left hand
KM25 2399473 KM25SCLCL0930 25 30 1.181 16 .630 12,5 .492 CCMT09T308 CCMT3252
KM25 2399475 KM25SCLCL1230 25 30 1.181 16 .630 12,5 .492 CCMT120408 CCMT432
SDJC 93°
L1 F H1
mm inch mm inch mm inch
0°
ISO
Insert
ANSI
HYDRAULIC CHUCKS
H1
System
Size
Order
number
Catalog
number
D
mm
F
Right hand
KM25 2399476 KM25SDJCR1130 25 30 1.181 16 .630 12,5 .492 DCMT11T308 DCMT3252
Left hand
KM25 2399477 KM25SDJCL1130 25 30 1.181 16 .630 12,5 .492 DCMT11T308 DCMT3252
SDPC 62° 30’
93°
L1
L1 F H1
mm inch mm inch mm inch
H1
0°
D
0°
ISO
Insert
ANSI
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
F
D
62°30´ 0°
L1
VDI DRIVEN UNITS
System
Size
Order
number
Catalog
number
D
mm
L1 F H1
mm inch mm inch mm inch
KM25 2399478 KM25SDPCN1130 25 30 1.181 - - 12,5 .492 DCMT11T308 DCMT3252
ISO
Insert
ANSI
Spare
Parts
ISO
Insert
ANSI
Shim
Shim
Screw
Insert
Screw
Wrench
CCMT09T308 CCMT3252 SKCP343 SRS3 MS1156 FT1535 T15
CCMT120408 CCMT432 SKCP453 SRS4 MS1158 FT154 T15
DCMT11T308 DCMT3252 SKDP343 SRS3 MS1156 FT1535 T15
To place an order, contact your Kennametal representative or visit www.kennametal.com.
Torx
Size
C23
KM25 QUICK-CHANGE SYSTEM

KM
KM25 Cutting Units – SCREW ON
SDQC 107° 30’
H1
0°
F
107°30´
D
L1 0°
HYDRAULIC CHUCKS
System
Size
SDUC 93°
Order
number
Catalog
number
D
mm
L1 F H1
mm inch mm inch mm inch
Right hand
KM25 2399479 KM25SDQCR1130 25 30 1.181 22 .866 12,5 .492 DCMT11T308 DCMT3252
Left hand
KM25 2399480 KM25SDQCL1130 25 30 1.181 22 .866 12,5 .492 DCMT11T308 DCMT3252
H1
0°
ISO
Insert
ANSI
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
System
Size
Order
number
Catalog
number
D
mm
F
93°
D
L1 0°
Right hand
KM25 2399481 KM25SDUCR1130 25 30 1.181 22 .866 12,5 .492 DCMT11T308 DCMT3252
Left hand
KM25 2399482 KM25SDUCL1130 25 30 1.181 22 .866 12,5 .492 DCMT11T308 DCMT3252
SRDC 0°
L1 F H1
mm inch mm inch mm inch
H1
0°
ISO
Insert
ANSI
D
F
L1
0°
VDI DRIVEN UNITS
System
Size
Order
number
Catalog
number
D
mm
L1 F H1
mm inch mm inch mm inch
KM25 2399483 KM25SRDCN0830 25 30 1.181 - - 12,5 .492 RCMT0803M0 RCMT0803M0
ISO
Insert
ANSI
KM25 QUICK-CHANGE SYSTEM
Spare
Parts
ISO
DCMT11T308 DCMT3252 SKDP343 SRS3 MS1156 FT1535 T15
RCMT0803M0 RCMT0803M0 - - MS1154 FT9 T9
C24
Insert
ANSI
Shim
Shim
Screw
Insert
Screw
Screwdriver
To place an order, contact your Kennametal representative or visit www.kennametal.com.
Torx
Size

KM
KM25 Cutting Units – SCREW ON
SSDC 45°
H1
0°
F
D
45°
L1
0°
System
Size
Order
number
Catalog
number
D
mm
L1 F H1
mm inch mm inch mm inch
KM25 2399486 KM25SSDCN1230 25 30 1.181 - - 12,5 .492 SCMT120408 SCMT432
ISO
Insert
ANSI
STFC 90°
H1
0°
HYDRAULIC CHUCKS
System
Size
Order
number
Catalog
number
D
mm
F
90°
Right hand
KM25 2399487 KM25STFCR1630 25 30 1.181 16 .630 12,5 .492 TCMT16T308 TCMT3252
Left hand
KM25 2399488 KM25STFCL1630 25 30 1.181 16 .630 12,5 .492 TCMT16T308 TCMT3252
L1
L1 F H1
mm inch mm inch mm inch
D
0°
ISO
Insert
ANSI
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
STGC 90°
H1
0°
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
F
D
90°
L1
0°
System
Size
Order
number
Catalog
number
D
mm
L1 F H1
mm inch mm inch mm inch
Right hand
KM25 2399489 KM25STGCR1630 25 30 1.181 16 .630 12,5 .492 TCMT16T308 TCMT3252
Left hand
KM25 2399490 KM25STGCL1630 25 30 1.181 16 .630 12,5 .492 TCMT16T308 TCMT3252
ISO
Insert
ANSI
VDI DRIVEN UNITS
Spare
Parts
ISO
Insert
ANSI
Shim
Shim
Screw
Insert
Screw
Screwdriver
SCMT120408 SCMT432 SKSP453 SRS4 MS1158 FT154 T15
TCMT16T308 TCMT3252 SKTP343 SRS3 MS1156 FT1535 T15
To place an order, contact your Kennametal representative or visit www.kennametal.com.
Torx
Size
C25
KM25 QUICK-CHANGE SYSTEM

KM
KM25 Cutting Units – SCREW ON
SRGC 90°
0°
H1
F
L1
D
0°
HYDRAULIC CHUCKS
System
Size
STJC 93°
Order
number
Catalog
number
D
mm
L1 F H1
mm inch mm inch mm inch
Right hand
KM25 2399484 KM25SRGCR1030 25 30 1.181 22 .866 12,5 .492 RCMT10T3M0 RCMT10T3M0
Left hand
KM25 2399485 KM25SRGCL1030 25 30 1.181 22 .866 12,5 .492 RCMT10T3M0 RCMT10T3M0
H1
0°
ISO
Insert
ANSI
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
System
Size
Order
number
Catalog
number
D
mm
F
Right hand
KM25 2399491 KM25STJCR1630 25 30 1.181 16 .630 12,5 .492 TCMT16T308 TCMT3252
Left hand
KM25 2399492 KM25STJCL1630 25 30 1.181 16 .630 12,5 .492 TCMT16T308 TCMT3252
Spare
Parts
93°
L1
D
L1 F H1
mm inch mm inch mm inch
0°
ISO
Insert
ANSI
ISO
Insert
ANSI
Shim
Shim
Screw
Insert
Screw
Screwdriver
RCMT10T3M0 RCMT10T3M0 SKRN100300 SRS3 MS1156 FT1535 T15
TCMT16T308 TCMT3252 SKTP343 SRS3 MS1156 FT1535 T15
Torx
Size
VDI DRIVEN UNITS
To place an order, contact your Kennametal
representative or visit www.kennametal.com.
KM25 QUICK-CHANGE SYSTEM
C26

KM
KM25 Cutting Units – Grooving / Threading and Cut-Off
NE 93° – End Mount
0°
H1
F
W
93°
CD
L1
D
0°
Top Notch Grooving /
Threading – NE-Style
System Order Catalog D L1
F
W
CD
H1
Size number number mm mm inch mm inch mm inch
mm inch mm inch Insert
Right hand
KM25 2399462 KM25NER230 25 30 1.181 22 .866 0,79 - 3,17 .031 -.125 1,27 - 2,8 .050 -.110 12,5 .492 NG2L
KM25 2399494 KM25NER330 25 30 1.181 22 .866 1,19 - 4,8 .047 -.189 1,9 - 3,81 .075 -.150 12,5 .492 NG3L
KM25 2399496 KM25NER430 25 30 1.181 24 .945 3,17 - 6,35 .125 -.250 3,81 - 6,35 .150 -.250 12,5 .492 NG4L
Left hand
KM25 2399493 KM25NEL230 25 30 1.181 22 .866 0,79 - 3,17 .031 -.125 1,27 - 2,8 .050 -.110 12,5 .492 NG2R
KM25 2399495 KM25NEL330 25 30 1.181 22 .866 1,19 - 4,8 .047 -.189 1,9 - 3,81 .075 -.150 12,5 .492 NG3R
KM25 2399497 KM25NEL430 25 30 1.181 24 .945 3,17 - 6,35 .125 -.250 3,81 - 6,35 .150 -.250 12,5 .492 NG4R
HYDRAULIC CHUCKS
NS 93° – Side Mount
0°
Top Notch Grooving /
Threading – NS-Style
H1
CD
F
W
93°
L1
D
0°
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
System
Size
Order
number
Catalog
number
D L1
F
W
mm mm inch mm inch mm inch
Right hand
KM25 2399498 KM25NSR230 25 30 1.181 16 .630 0,79 - 3,17 .031 -.125 1,27 - 2,8 .050 -.110 12,5 .492 NG2R
KM25 2399500 KM25NSR330 25 30 1.181 16 .630 1,19 - 4,8 .047 -.189 1,9 - 3,81 .075 -.150 12,5 .492 NG3R
KM25 2399502 KM25NSR430 25 30 1.181 16 .630 3,17 - 6,35 .125 -.250 3,81 - 6,35 .150 -.250 12,5 .492 NG4R
Left hand
KM25 2399499 KM25NSL230 25 30 1.181 16 .630 0,79 - 3,17 .031 -.125 1,27 - 2,8 .050 -.110 12,5 .492 NG2L
KM25 2399501 KM25NSL330 25 30 1.181 16 .630 1,19 - 4,8 .047 -.189 1,9 - 3,81 .075 -.150 12,5 .492 NG3L
KM25 2399503 KM25NSL430 25 30 1.181 16 .630 3,17 - 6,35 .125 -.250 3,81 - 6,35 .150 -.250 12,5 .492 NG4L
mm
CD
inch
H1
mm inch
Insert
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
Spare Parts
Insert
Clamp
Clamp
Screw
Wrench
Torx
Size
NG2R CM74 MS1200 KT10 T10
NG2L CM75 MS1200 KT10 T10
NG3R CM72LP MS2111 K25IP 25IP
NG3L CM73LP MS2111 K25IP 25IP
NG4R CM212LP MS2111 K25IP 25IP
NG4L CM213LP MS2111 K25IP 25IP
VDI DRIVEN UNITS
To place an order, contact your Kennametal representative or visit www.kennametal.com.
C27
KM25 QUICK-CHANGE SYSTEM

KM
KM25 Cutting Units – Grooving / Threading and Cut-Off
A3SS – Deep Groove
H1
F
CD
D
W
L1
A3SS – Deep Grooving
HYDRAULIC CHUCKS
System
Size
Order
number
Catalog
number
D
mm
L1
F
mm inch mm inch
W
mm inch
CD
mm inch
H1
mm inch
Right hand
KM25 2399513 KM25A3SSR031635 25 35 1.378 16 .630 3 .118 16 .630 12,5 .492 A2.03../A3.03..
KM25 2399515 KM25A3SSR041635 25 35 1.378 16 .630 4 .157 16 .630 12,5 .492 A2.04../A3.04..
KM25 2399517 KM25A3SSR042645 25 45 1.772 16 .630 4 .157 26 1.024 12,5 .492 A2.04../A3.04..
KM25 2399519 KM25A3SSR051635 25 35 1.378 16 .630 5 .197 16 .630 12,5 .492 A2.05../A3.05..
KM25 2399521 KM25A3SSR052645 25 45 1.772 16 .630 5 .197 26 1.024 12,5 .492 A2.05../A3.05..
Left hand
KM25 2399514 KM25A3SSL031635 25 35 1.378 16 .630 3 .118 16 .630 12,5 .492 A2.03../A3.03..
KM25 2399516 KM25A3SSL041635 25 35 1.378 16 .630 4 .157 16 .630 12,5 .492 A2.04../A3.04..
KM25 2399518 KM25A3SSL042645 25 45 1.772 16 .630 4 .157 26 1.024 12,5 .492 A2.04../A3.04..
KM25 2399520 KM25A3SSL051635 25 35 1.378 16 .630 5 .197 16 .630 12,5 .492 A2.05../A3.05..
KM25 2399522 KM25A3SSL052645 25 45 1.772 16 .630 5 .197 26 1.024 12,5 .492 A2.05../A3.05..
Insert
Seat
Size
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
A3SC – Cut-Off
H1
F
W
CD
L1
D
A3SC – Cut-Off
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
VDI DRIVEN UNITS
System
Size
Order
number
Catalog
number
Right hand
KM25 2399527 KM25A3SCR031635 25 35 1.378 16 .630 3 .118 16 .630 12,5 .492 A2.03../A3.03..
KM25 2399529 KM25A3SCR032645 25 45 1.772 16 .630 3 .118 26 1.024 12,5 .492 A2.03../A3.03..
KM25 2399531 KM25A3SCR041635 25 35 1.378 16 .630 4 .157 16 .630 12,5 .492 A2.04../A3.04..
KM25 2399533 KM25A3SCR042645 25 45 1.772 16 .630 4 .157 26 1.024 12,5 .492 A2.04../A3.04..
Left hand
KM25 2399528 KM25A3SCL031635 25 35 1.378 16 .630 3 .118 16 .630 12,5 .492 A2.03../A3.03..
KM25 2399530 KM25A3SCL032645 25 45 1.772 16 .630 3 .118 26 1.024 12,5 .492 A2.03../A3.03..
KM25 2399532 KM25A3SCL041635 25 35 1.378 16 .630 4 .157 16 .630 12,5 .492 A2.04../A3.04..
KM25 2399534 KM25A3SCL042645 25 45 1.772 16 .630 4 .157 26 1.024 12,5 .492 A2.04../A3.04..
Spare Parts
Insert
Seat Size
Clamp
Screw
D
mm
Wrench
Torx
Size
3 MS1944 KT25 T25
4 MS1595 KT30 T30
5 MS1595 KT30 T30
L1
F
mm inch mm inch
W
mm inch
CD
mm inch
H1
mm inch
Insert
Seat
Size
KM25 QUICK-CHANGE SYSTEM
C28
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KM
KM25 Cutting Units – Grooving / Threading and Cut-Off
A4SM – Straight Mount
H1
F
CD
D
Wmin
L1
A4 – Groove and Turn
System
Size
Order
number
Catalog
number
D
mm
L1
F
mm inch mm inch
Wmin
mm inch
CD
mm inch
H1
mm inch
Right hand
KM25 2399464 KM25A4SMR031430 25 30 1.181 14 .571 3 .118 14 .551 12,5 .492 A4.03..
KM25 2399466 KM25A4SMR041430 25 30 1.181 14 .551 4 .157 14 .551 12,5 .492 A4.04..
KM25 2399468 KM25A4SMR051935 25 35 1.378 13 .531 5 .197 19 .748 12,5 .492 A4.05..
Left hand
KM25 2399465 KM25A4SML031430 25 30 1.181 14 .571 3 .118 14 .551 12,5 .492 A4.03..
KM25 2399467 KM25A4SML041430 25 30 1.181 14 .551 4 .157 14 .551 12,5 .492 A4.04..
KM25 2399469 KM25A4SML051935 25 35 1.378 13,5 .531 5 .197 19 .748 12,5 .492 A4.05..
Insert
Seat
Size
HYDRAULIC CHUCKS
A4EN – End Mount
H1
F
Wmin
CD
L1
D
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
A4 – Universal / Face Grooving Holder
System
Size
Order
number
Catalog
number
D
mm
L1
F
mm inch mm inch
Wmin
mm inch
CD
mm inch
H1
mm inch
KM25 2399470 KM25A4ENN040730 25 30 1.181 23 .906 4 .157 7 .276 12,5 .492 4
KM25 2399471 KM25A4ENN050930 25 30 1.181 25,3 .996 5 .197 9 .354 12,5 .492 5
Insert
Seat
Size
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
Spare Parts
Insert
Seat Size
Clamp
Screw
Wrench
Torx
Size
3 MS2091 K25IP 25IP
4 MS2091 K25IP 25IP
5 MS2091 K25IP 25IP
VDI DRIVEN UNITS
To place an order, contact your Kennametal representative or visit www.kennametal.com.
C29
KM25 QUICK-CHANGE SYSTEM

KM
KM25 Cutting Units – Grooving / Threading and Cut-Off
BE – End Mount
L1
D
F
H1
BE – End Mount
HYDRAULIC CHUCKS
System
Size
Order
number
Catalog
number
Right hand
KM25 2426882 KM25BER 25 28 1.103 6,8 .268 12,5 .492 A2BHSN19X
Left hand
KM25 2427293 KM25BEL 25 28 1.103 6,8 .268 12,5 .492 A2BHSN19X
BS – Side Mount
D
L1 F H1
mm mm inch mm inch mm inch
Blade
H1
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
BS – Side Mount
System
Size
Order
number
Catalog
number
Right hand
KM25 2426880 KM25BSR 25 4,8 .189 14 .552 12,5 .492 A2BHSN19X
Left hand
KM25 2426881 KM25BSL 25 4,8 .189 14 .552 12,5 .492 A2BHSN19X
Spare Parts
Clamp
A2 -
Torx
Blade
Screw
Torx Screw
Blade
Size
A2BHSN19X MS1898 T27 MS1898 A2BHSN19X T27
L1
D
F
D
L1 F H1
mm mm inch mm inch mm inch
Blade
Blade
L1
VDI DRIVEN UNITS
W
CD
F
KM25 QUICK-CHANGE SYSTEM
A2 – Blade
To be ordered separately
System
Size
Order
number
Catalog
number
A2 1851800 A2BHSN19X0211 2 .079 11 .433 20,19 .795 2,2 .087 A2022
A2 1851799 A2BHSN19X0216 2 .079 16 .630 25,2 .992 2,2 .087 A2022
A2 1984998 A2BHSN19X0116 1,7 .067 15,25 .600 25,2 .992 1,6 .063 A2016
C30
mm
F
inch
CD
mm inch
L1
mm inch
W
mm inch
Insert
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KM
KM25 Cutting Units with A2 Modular Blade Assemblies
BE – End Mount
BS – Side Mount
F
CD
W
L1
F (assembly) = F (toolholder) + L1 (blade)
L1 (assembly) = L1 (toolholder) + F (blade)
D
F
W
CD
L1
F (assembly) = F (toolholder) + F (blade)
L1 (assembly) = L1 (toolholder) + L1 (blade)
D
KM25 Cutting Units – Threading
LSS – Side Mount
H1
10°
F
D
HYDRAULIC CHUCKS
LT Threading
LSS-90°
System
Size
Order
number
Catalog
number
Right hand
KM25 2399504 KM25LSSR1630 25 30 1.181 16 .630 12,5 .492 LT16ER
Left hand
KM25 2399505 KM25LSSL1630 25 30 1.181 16 .630 12,5 .492 LT16EL
90°
L1
D
L1 F H1
mm mm inch mm inch mm inch
1°30´
Insert
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
LSE – End Mount
1°30´
H1
F
90°
L1
D
10°
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
LT Threading
LSE-90°
System
Size
Order
number
Catalog
number
D
L1 F H1
mm mm inch mm inch mm inch
Right hand
KM25 2399506 KM25LSER1630 25 30 1.181 22 .866 12,5 .492 LT16EL
Left hand
KM25 2399507 KM25LSEL1630 25 30 1.181 22 .866 12,5 .492 LT16ER
Insert
VDI DRIVEN UNITS
Spare
Parts
Insert
Shim
Insert
Screw
Shim
Screw
Torx
Size
Clamp
Assembly
LT16ER SMYE3 SSA3T SSY3T T10 CKC3 T15
LT16EL SMYI3 SSA3T SSY3T T10 CKC3 T15
To place an order, contact your Kennametal representative or visit www.kennametal.com.
Torx
Size
C31
KM25 QUICK-CHANGE SYSTEM

KM
KM25 Accessories
BN – Blank
38 - 42 HRC
D2
D
L1
BN – Blank
System
Size
Order
number
Catalog
number
D
mm
D2
L1
mm inch mm inch
KM25 2427296 KM25BN5050 25 50 1.969 50 1.969
HYDRAULIC CHUCKS
P – Plug
D2
D
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
P – Plug
System
Size
Order
number
Catalog
number
D
mm
KM25 2427295 KM25P 25 25 .984 5 .197
L1
D2
L1
mm inch mm inch
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
Presetter CV Shank – Offset (Static Tools)
D13
D1 F L1
VDI DRIVEN UNITS
Presetter CV Shank –
Offset (Static Tools)
System
Size
Order
number
Catalog
number
D1
mm
Taper
F
L1
mm inch mm inch
D13
mm inch
Spare Parts
Package
CV50 2427294 CV50KM25ECTRA 25 CV50 12,5 .492 50 1.969 26,39 1.039 KM25NRPKG
KM25 QUICK-CHANGE SYSTEM
C32
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KM
KM25 Accessories
TB – Tumble Block
D1
L2
L
B2
B1
H2
H3
TB – Tumble Block
System
Size
Order
number
Catalog
number
D1 L L2 H2 H3 B1
B2
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
Spare Parts
Package
KM25 2429806 KM25TB 25 .984 76,2 3.00 20 .787 64 2.520 32 1.260 32 1.260 64 2.52 KM25NRPKG
GB – Gage Bar
A
HYDRAULIC CHUCKS
GB – Gage Bar
.0002 ( 0,005)
B A
System Order Catalog
D
D2
L1
Size number number
mm
mm inch mm inch
KM25 2427297 KM25GB3230 25 32 1.260 30 1.181
D2
L1
B
D
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
Torque Wrench
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
Torque Wrench
Order
number
Catalog
number
Wrench
Type
Adapter
Size
Driver
Hex Size Torque Torque Wrench description
25 2432682 TW628R ratchet 0,375 6 mm 28 ft.-lbs. complete with adapter & driver bit
3/8" 38 Nm
VDI DRIVEN UNITS
To place an order, contact your Kennametal representative or visit www.kennametal.com.
C33
KM25 QUICK-CHANGE SYSTEM

KM
KM3225 Clamping Units
D2
D1 F
CS D
L2
L
L12
Clamping Unit Eccentric Shank
HYDRAULIC CHUCKS
System
Size
Order
number
Catalog
number
D1
D
D2
F L L12
mm mm inch mm CS mm inch mm inch mm inch
L2
mm inch
KM3225 2541730 KM3225ECMS24 32 38,1 1.500 32 1/4-18NPT 3,04 .120 254 10.000 215 8.465 35 1.378
KM3225 2541836 KM3225ECMS40 32 40 1.574 32 1/4-18NPT 3,99 .157 270 24.016 232 9.134 35 1.378
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
Clamping Unit Straight Shank Short
System
Size
Order
number
Catalog
number
KM3225 2594730 KM3225NCMSS2525 32 25 .984 1/4-18NPT 90 3.543 25 .984 36 1.417
KM3225 2594729 KM3225NCMSS16098 32 25,4 1.000 1/4-18NPT 90 3.543 25 .984 36 1.417
KM3225 - KM3225NCMSS20098 32 31,75 1.250 1/4-18NPT 90 3.543 25 .984 44 1.732
KM3225 - KM3225NCMSS24098 32 38,1 1.500 1/4-18NPT 90 3.543 25 .984 50 1.969
KM3225 - KM3225NCMSS3225 32 32 1.260 1/4-18NPT 90 3.543 25 .984 44 1.732
KM3225 - KM3225NCMSS4025 32 40 1.575 1/4-18NPT 90 3.543 25 .984 50 1.969
D2 D1
D1
D
L
L1
mm mm inch CS
mm inch mm inch
L1
L
CS D
D2
mm inch
D2 D1
CS D
VDI DRIVEN UNITS
Clamping Unit Straight Shank Long
L2
L
L12
KM25 QUICK-CHANGE SYSTEM
System
Size
Order
number
Catalog
number
KM3225 2541835 KM3225NCMS20 32 31,75 1.250 32 1/4-18NPT 172 6.750 140 5.512 25 .984
KM3225 2541837 KM3225NCMS32 32 32 1.260 32 1/4-18NPT 220 8.661 188 7.402 25 .984
C34
D1
D
D2
F
L
mm mm inch mm CS mm inch mm inch
To place an order, contact your Kennametal representative or visit www.kennametal.com.
L12
mm inch

KM
KM3225 Clamping Units
D2 D1
D5
L1
Extension
System
Size
Order
number
Catalog
number
D1
mm
D5 D2 L1
mm inch mm inch mm inch
KM3225 2541964 KM3225S3240 32 32 1.260 32 1.260 40 1.575
KM3225 2541965 KM3225S3260 32 32 1.260 32 1.260 60 2.362
HYDRAULIC CHUCKS
H2
D
D1
Clamping Unit Flange
H3
System Order Catalog
D1
D L L1 B2 B1
H2
H3
Size number number
mm mm inch mm inch mm inch mm inch mm inch mm inch mm inch
KM3225 2594731 KM3225NCMSF3645 32 24 .945 28 1.102 20 .787 36 1.417 18 .708 44 1.732 22 .866
B1
B2
L1
L
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
Spare Parts
Spare Parts
Package
Hex
Tightening
Torque
ft.-lbs./ Nm
KM3225NRPKG 6 mm 25-30 ft.-lbs./ 34-40 Nm
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
Note: A torque wrench must be used to achieve required clamping force. See page C33.
17,00 0,10
(.669 .004)
16,50 0,05
(.650 .002)
13,00 0,10
(.512 .004)
3,00
(.118)
COOLANT 2 x
A
14,60 0,02
(.575 .001)
A
B
B
C
C
Flange Mounting Details
9,40 0,02
(.370 .001)
24,02 0,03
(.946 .001)
A-A
8,50
(.335)
M6x1,0
15,00
(.591)
18,00
(.709)
C-C
To place an order, contact your Kennametal representative or visit www.kennametal.com.
B-B
5,05 0,025
(.199 .008)
10,00
(.394)
C35
VDI DRIVEN UNITS
KM25 QUICK-CHANGE SYSTEM

KM
KM3225 Boring Bar Adapter
BA
D2
D1
D5
L9
L1
HYDRAULIC CHUCKS
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
metric
BA Boring Bar
Adapter
Catalog number
inch
BA Boring Bar
Adapter
Catalog number
D5
mm
L1 D1 D2
mm inch mm inch mm inch
L9
mm inch
Set
Screw
KM3225BA0645M 32 45 1.772 6 .236 32 1.260 36 1.417 MS734 2,5
KM3225BA0845M 32 45 1.772 8 .315 32 1.260 36 1.417 MS734 2,5
KM3225BA1055M 32 55 2.165 10 .394 32 1.260 48 1.890 MS1879 4,0
KM3225BA1260M 32 60 2.362 12 .472 32 1.260 52 2.047 MS1879 4,0
KM3225BA1665M 32 65 2.559 16 .630 34 1.339 55 2.165 MS1865 5,0
KM3225BA2070M 32 70 2.756 20 .787 37 1.457 58 2.283 MS1865 5,0
D5
L1 D1 D2
mm mm inch mm inch mm inch
L9
mm inch
Set
Screw
KM3225BA06217 32 55 2.165 9,5 .375 32 1.260 48 1.890 S841 1/8
KM3225BA08236 32 60 2.362 12,7 .500 32 1.260 52 2.047 S850 5/32
KM3225BA10256 32 65 2.559 15,8 .625 34 1.339 55 2.165 S861 3/16
KM3225BA12276 32 70 2.756 19,05 .750 37 1.457 58 2.283 S861 3/16
Hex
Size
Hex
Size
VDI DRIVEN UNITS
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
To place an order, contact your Kennametal
representative or visit www.kennametal.com.
KM25 QUICK-CHANGE SYSTEM
C36

KM
KM3225 Cutting Units – KENLOC
MCFN 90°
γP
0°
F
90°
L1
D2
γF
Dmin
System Order Catalog
D2 D min F L1 L1S
Insert
Size number number
mm mm inch mm inch mm inch mm inch γP° γF° ISO
ANSI
Right hand
KM3225 2527431 KM3225MCFNR1230 32 40 1.575 22 .866 30 1.181 - - -5 -12 CNMG120408 CNMG432
Left hand
KM3225 2527432 KM3225MCFNL1230 32 40 1.575 22 .866 30 1.181 - - -5 -12 CNMG120408 CNMG432
MCKN 75°
γP
HYDRAULIC CHUCKS
15°
F
75°
L1
L1S
System Order Catalog
D2 D min F L1 L1S
Insert
Size number number
mm mm inch mm inch mm inch mm inch γP° γF° ISO
ANSI
Right hand
KM3225 2527433 KM3225MCKNR1230 32 40 1.575 22 .866 30 1.181 33,041.301 -5 -14 CNMG120408 CNMG432
Left hand
KM3225 2527434 KM3225MCKNL1230 32 40 1.575 22 .866 30 1.181 33,041.301 -5 -14 CNMG120408 CNMG432
Spare
Parts
Insert
Clamp
Torx
ISO
ANSI
Shim
Lock Pin Clamp
Screw Wrench Size
CNMG120408 CNMG432 ICSN432 KLM4615IP CKM20LP STCM1115IP K15IP 15IP
D2
γF
Dmin
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
VDI DRIVEN UNITS
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
To place an order, contact your Kennametal representative or visit www.kennametal.com.
C37
KM25 QUICK-CHANGE SYSTEM

KM
KM3225 Cutting Units – KENLOC
MCLN 95°
γP
5°
F
95°
L1
D2
γF
Dmin
HYDRAULIC CHUCKS
System Order Catalog
D2 D min F L1 L1S
Insert
Size number number
mm mm inch mm inch mm inch mm inch γP° γF° ISO
ANSI
Right hand
KM3225 2527435 KM3225MCLNR0930 32 40 1.575 22 .866 30 1.181 - - -5 -9 CNMG090308 CNMG322
KM3225 2527437 KM3225MCLNR1230 32 40 1.575 22 .866 30 1.181 - - -5 -12 CNMG120408 CNMG432
Left hand
KM3225 2527436 KM3225MCLNL0930 32 40 1.575 22 .866 30 1.181 - - -5 -9 CNMG090308 CNMG322
KM3225 2527438 KM3225MCLNL1230 32 40 1.575 22 .866 30 1.181 - - -5 -12 CNMG120408 CNMG432
MDPN 62,5°
γP
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
27,5°
F 62,5°
L1
L1S
System Order Catalog
D2 D min F L1 L1S
Insert
Size number number
mm mm inch mm inch mm inch mm inch γP° γF° ISO
ANSI
Right hand
KM3225 2527441 KM3225MDPNR1130 32 40 1.575 22 .866 30 1.181 34,8 1.370 0 -10 DNMG110408 DNMG332
KM3225 2527439 KM3225MDPNR150430 32 50 1.969 27 1.063 30 1.181 36,57 1.440 0 -10 DNMG150408 DNMG432
Left hand
KM3225 2527442 KM3225MDPNL1130 32 40 1.575 22 .866 30 1.181 34,8 1.370 0 -10 DNMG110408 DNMG332
KM3225 2527440 KM3225MDPNL150430 32 50 1.969 27 1.063 30 1.181 36,57 1.440 0 -10 DNMG150408 DNMG432
Spare
Parts
D2
γF
Dmin
VDI DRIVEN UNITS
ISO
Insert
ANSI
Shim
Lock Pin
CNMG090308 CNMG322 ICSN332 KLM34LT9 CKM7LP STCM9T9 KT9 T9
CNMG120408 CNMG432 ICSN432 KLM4615IP CKM23LP STCM1115IP K15IP 15IP
DNMG110408 DNMG332 IDSN322 KLM34LT9 CKM7LP STCM9T9 KT9 T9
DNMG150408 DNMG432 IDSN432 KLM4615IP CKM23LP STCM1115IP K15IP 15IP
Clamp
Clamp
Screw
Wrench
Torx
Size
KM25 QUICK-CHANGE SYSTEM
C38
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KM
KM3225 Cutting Units – KENLOC
MDQN 107° 30’
γP
17,5°
D2
F 107,5°
L1
γF
Dmin
System Order Catalog
D2 D min F L1
L1S
Insert
Size number number
mm mm inch mm inch mm inch mm inch γP° γF° ISO
ANSI
Right hand
KM3225 2527445 KM3225MDQNR1130 32 40 1.575 22 .866 30 1.181 - - -5 -8 DNMG110408 DNMG332
KM3225 2527443 KM3225MDQNR150430 32 40 1.575 22 .866 30 1.181 - - -5 -12 DNMG150408 DNMG432
Left hand
KM3225 2527446 KM3225MDQNL1130 32 40 1.575 22 .866 30 1.181 - - -5 -8 DNMG110408 DNMG332
KM3225 2527444 KM3225MDQNL150430 32 40 1.575 22 .866 30 1.181 - - -5 -12 DNMG150408 DNMG432
MDUN 93°
γP
HYDRAULIC CHUCKS
F 93°
3°
L1
System Order Catalog
D2 D min F L1
L1S
Insert
Size number number
mm mm inch mm inch mm inch mm inch γP° γF° ISO
ANSI
Right hand
KM3225 2527449 KM3225MDUNR1130 32 40 1.575 22 .866 30 1.181 - - -5 -10 DNMG110408 DNMG332
KM3225 2527447 KM3225MDUNR150430 32 40 1.575 22 .866 30 1.181 - - -5 -12 DMNG150408 DMNG432
Left hand
KM3225 2527450 KM3225MDUNL1130 32 40 1.575 22 .866 30 1.181 - - -5 -10 DNMG110408 DNMG332
KM3225 2527448 KM3225MDUNL150430 32 40 1.575 22 .866 30 1.181 - - -5 -12 DMNG150408 DMNG432
Spare
Parts
D2
γF
Dmin
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
ISO
Insert
ANSI
Shim
Lock Pin
DNMG110408 DNMG332 IDSN322 KLM34LT9 CKM7LP STCM9T9 KT9 T9
DNMG150408 DNMG432 IDSN432 KLM4615IP CKM23LP STCM1115IP K15IP 15IP
Clamp
Clamp
Screw
Wrench
Torx
Size
VDI DRIVEN UNITS
To place an order, contact your Kennametal representative or visit www.kennametal.com.
C39
KM25 QUICK-CHANGE SYSTEM

KM
KM3225 Cutting Units – KENLOC
MSKN 75°
γP
15°
F
75°
L1
L1S
D2
γF
Dmin
HYDRAULIC CHUCKS
System Order Catalog
D2 D min F L1 L1S
Insert
Size number number
mm mm inch mm inch mm inch mm inch γP° γF° ISO
ANSI
Right hand
KM3225 2527451 KM3225MSKNR1230 32 40 1.575 22 .866 30 1.181 33,01 1.300 -5 -12 SNMG120408 SNMG432
Left hand
KM3225 2527452 KM3225MSKNL1230 32 40 1.575 22 .866 30 1.181 33,01 1.300 -5 -12 SNMG120408 SNMG432
MTFN 90°
γP
0°
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
F
90°
L1
System Order Catalog
D2 D min F L1 L1S
Insert
Size number number
mm mm inch mm inch mm inch mm inch γP° γF° ISO
ANSI
Right hand
KM3225 2527453 KM3225MTFNR1630 32 40 1.575 22 .866 30 1.181 - - -5 -12 TNMG160408 TNMG332
KM3225 2527455 KM3225MTFNR2230 32 40 1.575 22 .866 30 1.181 - - -5 -12 TNMG220408 TNMG432
Left hand
KM3225 2527454 KM3225MTFNL1630 32 40 1.575 22 .866 30 1.181 - - -5 -12 TNMG160408 TNMG332
KM3225 2527456 KM3225MTFNL2230 32 40 1.575 22 .866 30 1.181 - - -5 -12 TNMG220408 TNMG432
Spare
Parts
D2
γF
Dmin
ISO
Insert
ANSI
Shim
Lock Pin
SNMG120408 SNMG432 ISSN432 KLM4615IP CKM20LP STCM1115IP K15IP 15IP
TNMG160408 TNMG332 ITSN323 KLM34LT9 CKM20LP STCM119IP K9IP 9IP
TNMG220408 TNMG432 ITSN433 KLM4615IP CKM20LP STCM1115IP K15IP 15IP
Clamp
Clamp
Screw
Wrench
Torx
Size
VDI DRIVEN UNITS
KM25 QUICK-CHANGE SYSTEM
C40
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KM
KM3225 Cutting Units – KENLOC
MVUN 93°
γP
3°
D2
F
93°
L1
γF
Dmin
System Order Catalog
D2 D min F L1
L1S
Insert
Size number number
mm mm inch mm inch mm inch mm inch γP° γF° ISO
ANSI
Right hand
KM3225 2527457 KM3225MVUNR1630 32 50 1.969 27 1.063 30 1.181 - - -5 -9 VNMG160408 VNMG332
Left hand
KM3225 2527458 KM3225MVUNL1630 32 50 1.969 27 1.063 30 1.181 - - -5 -9 VNMG160408 VNMG332
MWLN 95°
γP
HYDRAULIC CHUCKS
F 95°
5°
L1
System Order Catalog
D2 D min F L1
L1S
Insert
Size number number
mm mm inch mm inch mm inch mm inch γP° γF° ISO
ANSI
Right hand
KM3225 2527459 KM3225MWLNR0830 32 40 1.575 22 .866 30 1.181 - - -5 -14 WNMG080408 WNMG432
Left hand
KM3225 2527460 KM3225MWLNL0830 32 40 1.575 22 .866 30 1.181 - - -5 -14 WNMG080408 WNMG432
Spare
Parts
ISO
Insert
ANSI
Shim
Lock Pin
D2
γF
Dmin
VNMG160408 VNMG332 IVSN322 KLM34L9IP CKM20LP STCM119IP K9IP 9IP
WNMG080408 WNMG432 IWSN433 KLM4615IP CKM20LP STCM1115IP K15IP 15IP
Clamp
Clamp
Screw
Wrench
Torx
Size
VDI DRIVEN UNITS
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
To place an order, contact your Kennametal representative or visit www.kennametal.com.
C41
KM25 QUICK-CHANGE SYSTEM

KM
KM3225 Cutting Units – KENLEVER
PCLN 95°
γP
5°
F
95°
L1
D2
γF
Dmin
HYDRAULIC CHUCKS
System
Size
Right hand
KM3225 2527461 KM3225PCLNR1230 32 40 1.575 22 .866 30 1.181 -5 -10 CNMG120408 CNMG432
Left hand
KM3225 2527462 KM3225PCLNL1230 32 40 1.575 22 .866 30 1.181 -5 -10 CNMG120408 CNMG432
PDUN 93°
Order
number
Catalog
number
D2
mm
γP
D min F L1
mm inch mm inch mm inch
γP°
γF°
ISO
Insert
ANSI
3°
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
System
Size
Spare
Parts
ISO
Insert
Order
number
Right hand
KM3225 2527463 KM3225PDUNR1130 32 40 1.575 22 .866 30 1.181 -5 -11 DNMG110408 DNMG332
Left hand
KM3225 2527464 KM3225PDUNL1130 32 40 1.575 22 .866 30 1.181 -5 -11 DNMG110408 DNMG332
ANSI
Catalog
number
Shim
D2
mm
Shim
Pin
F
93°
DNMG110408 DNMG332 512060 513060 511060 514118 515018 K15IP
CNMG120408 CNMG432 512112 513023 511023 514123 515018 K15IP
Lever
L1
Lever
Screw
D2
γF
Dmin
D min F L1
mm inch mm inch mm inch
Pin
Punch
Wrench
γP°
γF°
ISO
Insert
ANSI
VDI DRIVEN UNITS
KM25 QUICK-CHANGE SYSTEM
C42
To place an order, contact your Kennametal
representative or visit www.kennametal.com.
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KM
KM3225 Cutting Units – KENLEVER
PWLN 95°
γP
5°
F 95°
L1
D2
γF
Dmin
System
Size
Order
number
Catalog
number
Right hand
KM3225 2527465 KM3225PWLNR0830 32 40 1.575 22 .866 30 1.181 -5 -10 WNMG080408 WNMG432
Left hand
KM3225 2527466 KM3225PWLNL0830 32 40 1.575 22 .866 30 1.181 -5 -10 WNMG080408 WNMG432
Spare
Parts
D2
mm
D min F L1
mm inch mm inch mm inch
Insert
Shim
Lever Pin
ISO
ANSI
Shim Pin Lever Screw Punch Wrench
WNMG080408 WNMG432 512135 513023 511023 514123 515018 K15IP
γP°
γF°
ISO
Insert
ANSI
VDI DRIVEN UNITS
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
HYDRAULIC CHUCKS
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
Visit us online at
www.kennametal.com
to find your local contact.
To place an order, contact your Kennametal representative or visit www.kennametal.com.
C43
KM25 QUICK-CHANGE SYSTEM

KM
KM3225 Cutting Units – A3 & A4 Grooving
A3 Deep Grooving
D2
F
Wmin
90°
L1
CD
Dmin
HYDRAULIC CHUCKS
A3
Deep Grooving
System
Size
Order
number
Catalog
number
D2
mm
D min
F
mm inch mm inch
L1
mm inch
CD
mm inch
W min
mm inch
Right hand
KM3225 2527476 KM3225A3ESR0305M30 32 40 1.575 22 .886 30 1.181 5,36 .211 2,2 .087 3
KM3225 2527478 KM3225A3ESR0408M30 32 42 1.654 25 .984 30 1.181 8,24 .324 3 .118 4
KM3225 2527480 KM3225A3ESR0510M30 32 45 1.772 27 1.063 30 1.181 10,24 .403 4 .157 5
Left hand
KM3225 2527477 KM3225A3ESL0305M30 32 40 1.575 22 .886 30 1.181 5,36 .211 2,2 .087 3
KM3225 2527479 KM3225A3ESL0408M30 32 42 1.654 25 .984 30 1.181 8,24 .324 3 .118 4
KM3225 2527481 KM3225A3ESL0510M30 32 45 1.772 27 1.063 30 1.181 10,24 .403 4 .157 5
Insert
Seat
Size
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
A4 Groove and Turn
F
Wmin
90°
L1
CD
D2
Dmin
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
A4
Groove and Turn
System
Size
Order
number
Catalog
number
D2
mm
D min
F
mm inch mm inch
L1
mm inch
CD
mm inch
W min
mm inch
Right hand
KM3225 2527482 KM3225A4EMR0310M30 32 50 1.969 27 1.063 30 1.181 10,25 .404 3 .118 3
KM3225 2527484 KM3225A4EMR0410M30 32 50 1.969 27 1.063 30 1.181 10,25 .404 4 .157 4
KM3225 2527488 KM3225A4EMR0510M30 32 50 1.969 27 1.063 30 1.181 10,25 .404 5 .197 5
Left hand
KM3225 2527483 KM3225A4EML0310M30 32 50 1.969 27 1.063 30 1.181 10,25 .404 3 .118 3
KM3225 2527485 KM3225A4EML0410M30 32 50 1.969 27 1.063 30 1.181 10,25 .404 4 .157 4
KM3225 2527489 KM3225A4EML0510M30 32 50 1.969 27 1.063 30 1.181 10,25 .404 5 .197 5
Insert
Seat
Size
VDI DRIVEN UNITS
Spare
Parts
System
Insert
Seat
Size
Insert
Screw
Wrench
Torx
Size
A3 3 MS2064 K20IP 20IP
A3 4 MS2064 K20IP 20IP
A3 5 MS2062 K25IP 25IP
A4 3 MS2069 K30IP 30IP
A4 4 MS2069 K30IP 30IP
A4 5 MS2069 K30IP 30IP
KM25 QUICK-CHANGE SYSTEM
C44
To place an order, contact your Kennametal representative or visit www.kennametal.com.

KM
KM3225 Cutting Units – Grooving and Threading
NE 93° – End Mount
D2
F
W
90°
CD
L1
0°
Dmin
Top Notch Grooving /
Threading – NE Style
System
Size
Order
number
Catalog
number
D2 D min
L1
F
W
mm mm inch mm inch mm inch mm inch
Right hand
KM3225 - KM3225NER230 32 40 1.575 30 1.181 22 .866 .031-.125 0,79 - 3,18 .050 -.110 1,27 - 2,8 NG2L
KM3225 - KM3225NER330 32 40 1.575 30 1.181 22 .866 .047-.189 1,19 - 4,8 .075 -.150 1,9 - 3,81 NG3L
KM3225 - KM3225NER430 32 50 1.969 30 1.181 27 1.063 .125-.250 3,18 - 6,35 .150 -.250 3,81 - 6,35 NG4L
Left hand
KM3225 - KM3225NEL230 32 40 1.575 30 1.181 22 .866 .031-.125 0,79 - 3,18 .050 -.110 1,27 - 2,8 NG2R
KM3225 - KM3225NEL330 32 40 1.575 30 1.181 22 .866 .047-.189 1,19 - 4,8 .075 -.150 1,9 - 3,81 NG3R
KM3225 - KM3225NEL430 32 50 1.969 30 1.181 27 1.063 .125-.250 3,18 - 6,35 .150 -.250 3,81 - 6,35 NG4R
mm
CD
inch
Insert
HYDRAULIC CHUCKS
Spare
Parts
Insert
LSE – End Mount
Clamp
Clamp
Screw
Wrench
γP
Torx
Size
NG2L CM75 MS1488 KT15 T15
NG2R CM74 MS1488 KT15 T15
NG3L CM73LP MS2111 K25IP 25IP
NG3R CM72LP MS2111 K25IP 25IP
NG4L CM73LP MS2111 K25IP 25IP
NG4R CM72LP MS2111 K25IP 25IP
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
F
90°
L1
D2
γF
Dmin
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
LT Threading
LSE – 90°
Catalog
number
D2
mm
D min F L1
mm inch mm inch mm inch
Right Hand
KM3225LSER2230 32 40 1.575 22 .866 30 1.181 -1,5 -15 LT16NR
KM3225LSER1630 32 40 1.575 22 .866 30 1.181 -1,5 -15 LT16NR
Left hand
KM3225LSEL2230 32 40 1.575 22 .866 30 1.181 -1,5 -15 LT22NL
KM3225LSEL1630 32 40 1.575 22 .866 30 1.181 -1,5 -15 LT22NL
γP°
γF°
Insert
VDI DRIVEN UNITS
Spare
Parts
Insert
Shim
Shim
Screw
Assembly
Torx
Size
Clamp
Assembly
RH & LH
LT16NL/R (SMYI3) (SMYE3) SSY3T T10 CKC3 T15
LT22NL/R (SMYI4) (SMYE4) SSY4T T20 CKC4 T20
To place an order, contact your Kennametal representative or visit www.kennametal.com.
Torx
Size
C45
KM25 QUICK-CHANGE SYSTEM

KM
KM3225 Collet Chucks
ER
D2
Collet
Capacity
D5
L9
L1
Collet Chucks
HYDRAULIC CHUCKS
System
Size
Order
number
Catalog
number
ER Collet Chuck
Collet
System
Size
Collet
Capacity
KM3225 2527514 KM3225ER1635 ER 16 0,5-10 (1/16-13/32) 32 22 .866 35 1.378 33,2 1.307 LER16M
KM3225 2527516 KM3225ER2040 ER 20 0,5-13 (1/16-1/2) 32 28 1.102 40 1.575 36,3 1.429 LER20M
KM3225 2527515 KM3225ER2545 ER 25 1-16 (1/16-5/8) 32 42 1.654 45 1.772 38,8 1.528 LNER25M
TG
D5
mm
D11 L1 L9
mm inch mm inch mm inch
Locknut
D2
Collet
Capacity
D5
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
Collet Chucks
L9
L1
System Order
Catalog
number
Collet
System
Collet
D5
D11 L1 L9
Size number TG Collet Chuck Size Capacity
mm
mm inch mm inch mm inch Locknut
KM3225 2527512 KM3225TG07560 TG 75 3-20 (1/16-3/4) 32 50 1.969 60 2.362 52,2 2.055 LNA075M
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
Spare Parts
Torque
Weight
Locknut Wrench ft.-lbs. Nm Kg lbs.
LER16M ER16WEM 20 27 0,09 .200
LER20M ER20WEM 50 68 0,119 .260
LNER25M ER25WM 100 136 0,218 .480
LNA075M HSW45M 80-100 109-136 0,445 .980
BN
38 - 42 HRC
VDI DRIVEN UNITS
D2
D
L1
KM25 QUICK-CHANGE SYSTEM
BN – Blank
System
Size
Order
number
Catalog
number
D
mm
KM3225 - KM3225BN5050 32 50 1.969 50 1.969
C46
D2
L1
mm inch mm inch
To place an order, contact your Kennametal representative or visit www.kennametal.com.

Kennametal Mobile
Increase your performance
and productivity.
The easy way to transfer
CNC data to and from your machine
tools and manage your machine tool
control profiles.
cncGcoder
Software to receive/send/edit and save
CNC programs & machine tool control
profiles.
Complete package containing
Palm Zire 71 ® , Palm docking station
with USB and serial port, 16 MB SD
memory card (Kennametal Mobile
software), RS232 interface cable,
desktop software, and digital camera.
cncGcoder technical details
Send and receive CNC programs up to
1 MB – using the Kennametal Mobile
and the RS232 port on the machine
tool control. Manage up to 1,000
different machine tool control profiles.
(CNC programs must be in ISO or ASCII
format!)
The Kennametal Mobile also includes all
standard Palm software and features.
Kennametal Mobile
Order number: 2253135
Software upgrade for Mazak ® controls
This upgrade works in combination
with the standard Kennametal Mobile
(2253135) and adds the ability to
communicate with Mazak ® controls.
Order number: 2609414
Kennametal Mobile supports:
English, German, French, Italian, Spanish,
Portuguese and Dutch languages.
www.kennametal.com/mobile
C47

KM25 Tooling – Technical Information
Application Data – Maximum Safe Operating Conditions
HYDRAULIC CHUCKS
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
SHRINK FIT ADAPTERS
TOOLING SYSTEMS
VDI DRIVEN UNITS
The KM25 Coupling
The rigidity and stiffness of the patented KM25 joint
is achieved through a combination of unique design
elements incorporated in both the shank of the tool
and the clamping mechanism. The KM25 joint was
developed as a system and takes full advantage of
both the tool shank and the mechanism to obtain
maximum benefit from the space utilized.
contact
surfaces
Taper Shank
All KM25 tooling is designed around a short 10:1
tapered shank. Extensive testing of many different
lengths and angles proves this combination provides
the maximum stiffness and input forces required for
locking/unlocking. The taper is self-centering to
promote easy tool loading and unloading.
Face and Taper Contact
KM25 tooling is designed to have simultaneous taper
and face contact. Two alternate methods provide
metal-to-metal contact. One method is to manufacture
both halves of the coupling holding very close
tolerances. The other is to design a small amount of
elastic deformation into the assembly. With KM25
tooling, elastic deformation takes the form of
expansion of the female taper (on the clamping unit)
as the larger male taper (on the cutting unit) is pulled
back during lockup. Our testing proved that an
optimum combination of pull-back force and elastic
deformation (rather than a close tolerance) provides
greater static and dynamic stiffness, achieves a metalto-metal
fit, and is less costly to manufacture.
Clamping Mechanism
The mechanism design consists of two components; the
torque screw, and the wedge nut. This simple, yet
highly effective clamping mechanism allows the user to
lock and unlock the cutting unit by simply using a
preset torque wrench. This KM25 clamping mechanism
fits inside the taper shank of the KM25 cutting unit and
utilizes a coincidental cone design that maximizes the
contact area between the clamping mechanism and the
cutting unit. As a result, the cutting unit and clamping
mechanism are on a shared axis and provide accurate
axial and radial repeatability of ± .00008 inch
(± 2 micron) for a specific cutting unit in a specific
clamping unit. When more than one cutting unit is
used, the accuracy of each cutting unit must be
considered. Pre-gaging (when changing tools)
measures the deviations of each tool from the nominal.
These deviations can then be compensated for by the
machine tool control offsets.
Locking Sequence
The clamping sequence starts with the insertion of the
cutting unit into the female taper of the clamping unit.
The cutting unit first makes contact at a stand-off from
the gage face of approximately 0,25 mm (.010 inch).
The torque screw is then activated by a preset torque
wrench at a right angle to the centerline of the cutting
tool, located behind the gage face of the clamping unit.
A small amount of elastic deformation takes place at
the front of the female taper as the locking force is
applied. As the torque screw is further tightened to the
preset torque of 25-30 ft-lbs. (34-40 Nm), (4-1/4 turns),
the cutting unit advances until the gage face makes
contact with the face of the clamping unit. The final
amount of torque applied allows the tail of the cutting
unit to spread to clamp securely between the clamping
mechanism and the clamping unit inside diameter.
Installation
When initially clamping the KM25 shank in a machine
tool slot, it is recommended that a cutting unit is in
the shank.
Lubrication
Using a hex wrench, back out the torque screw against
the positive stop and generously apply grease to the
threads and conical surface of the component
hardware. Also, apply grease to the female taper
surface. This should be done periodically.
Recommended grease: Gleitmo 805.
KM25 QUICK-CHANGE SYSTEM
C48
Summary
The KM25 coupling offers a very rigid joint with a high
degree of repeatability while maintaining a very
compact envelope. This permits a high degree of
versatility without sacrificing cutting performance.
For further technical information visit www.kennametal.com.

KM25 Tooling – Technical Information
Application Data – Maximum Safe Operating Conditions
Operating Instructions for KM25
To change tooling, the machine operator simply
releases the locking system, changes the KM25
cutting unit, and locks the new tool into position.
The operator then makes the offset adjustments
according to the previously recorded pre-gaged data.
This process takes about 30 seconds versus up to 10
minutes, yielding dramatic productivity improvements.
Specific steps in the tool change process:
1. Use shop air to clean the clamping unit/cutting
unit.
2. Using the appropriate wrench, turn the torque
screw in a counterclockwise direction until it
reaches an internal stop.
3. Remove the cutting unit. (Note: If cutting unit does
not release, internal stop has not been reached.)
4. Use shop air to clean the clamping unit/cutting
unit.
5. Insert the new cutting unit into the taper.
6. Tighten the torque screw by turning it in a
clockwise direction, until the required torque
specification is achieved.
7. If the machine being used has the ability to
pre-gauge, adjust machine offsets as required.
Maximum Tangetial Load – KM25 Cutting Units
F
Dimension
(mm)
C
Dimension
(mm)
Tangential
Load
(lbf)
Tangential
Load
(kN)
16 30 1600 7,12
22 30 1100 4,89
28,5 30 750 3,34
24 30 950 4,23
16 35 1250 5,56
16 45 750 3,34
25,3 30 850 3,78
32 30 600 2,67
HYDRAULIC CHUCKS
COLLET CHUCKS/SLOTTING CUTTER ADAPTERS
Depth of Cut and Feed vs. Cutting Forces
depth of cut (mm)
9
TOOLING SYSTEMS
SHRINK FIT ADAPTERS
8
2kN
4kN
6kN
8kN
7
6
5
4
3
VDI DRIVEN UNITS
2
1
The values apply in
relation to C45 steel
0
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1
feed rate (mm)
For further technical information visit www.kennametal.com.
C49
KM25 QUICK-CHANGE SYSTEM

Features & Benefits:
• Hundreds of new products.
• Consistent look throughout catalog – globally.
• Easy navigation by page tabs.
• Easy tool reference.
• Technical application information.
• Slim “easy-carry“ design.
• Separate Inch and Metric Books.
• Over 500 pages of focused turning products.
• Available in 12 languages.

FIRST GLOBAL
TURNING BOOK
Contents
• ISO Turning Tools
• Grooving & Cut-Off Systems
• Threading Tools
• Application-Specific Tools
• Classic Inserts
Order numbers for the new Global Turning Book:
Order ISO Catalog ANSI Catalog Description/
number number number Sales text
2617455 KAT4010US A04-6US Lathe Catalog 2005 inch English
2617456 KAT4010UK A04-6UK Lathe Catalog 2005 metric English
2617457 KAT4010D A04-6D Lathe Catalog 2005 metric German
2617458 KAT4010F A04-6F Lathe Catalog 2005 metric French
2617459 KAT4010NL A04-6NL Lathe Catalog 2005 metric Dutch
2617460 KAT4010I A04-6I Lathe Catalog 2005 metric Italian
2617461 KAT4010E A04-6E Lathe Catalog 2005 metric Spanish
2617462 KAT4010P A04-6P Lathe Catalog 2005 metric Portuguese
2617593 KAT4010PL A04-6PL Lathe Catalog 2005 metric Polish
2617594 KAT4010TR A04-6TR Lathe Catalog 2005 metric Turkish
2617595 KAT4010KO A04-6KO Lathe Catalog 2005 metric Korean
2617596 KAT4010C A04-6C Lathe Catalog 2005 metric Chinese
2617597 KAT4010JP A04-6JP Lathe Catalog 2005 metric Japanese

Kennametal Headquarters
Europe Headquarters
Kennametal Europe GmbH
Rheingoldstraße 50
CH-8212 Neuhausen am Rheinfall
Phone: + 41/52/6750-100
Fax: + 41/52/6750-101
E-Mail: neuhausen.info@kennametal.com
Technology Center Europe
Phone: + 49 / 911/ 9735-0
Fax: + 49 / 911/ 9735-388
E-Mail: fuerth.information@kennametal.com
World Headquarters
Kennametal Inc.
1600 Technology Way
Latrobe, PA-USA 15650
Phone: + 01/ 724 /539-5000
Fax: + 01/ 724 / 539-4942
E-Mail: info@kennametal.com
Asia Pacific
Kennametal Singapore Pte. Ltd.
No. 11 Gul Link
Jurong
Singapore 629381
Phone: + 65 / 6 / 2659222
Fax: + 65 / 6 / 8610922
E-Mail: sales@kennametal.com.sg
WWW.KENNAMETAL.COM
For other countries, please refer to our website
www.kennametal.com or contact International
Sales & Services
Subsidiaries/Sales Offices
AUSTRIA
Kennametal Österreich GmbH
A 2345 Brunn am Gebirge
Campus 21 Businesspark Wien Süd
Europaring F12 301
Phone: + 43 /22 36 / 37 98 98
Fax: + 43 /22 36 / 37 98 98-40
E-Mail: brunn.sales@kennametal.com
BELGIUM/LUXEMBOURG
Kennametal Belgium S.A.
Parc Industriel des Hauts-Sarts
Rue de Hermee 177A
4040 Herstal
Phone: + 32 / 4 / 248 48 48
Fax: + 32 / 4 / 248 28 14
E-Mail: liege.sales@kennametal.com
CZECH REPUBLIC
Kennametal GmbH & Co. KG
Sales Office
Nad Olsinami 12
100 00 PRAHA 10
Phone: + 42 / 02 / 74 82 21 51
Fax: + 42 / 02 / 74 82 22 96
E-Mail: praha.sales@kennametal.com
FRANCE
Kennametal France S.A.S.
B.P. 201
91007 Evry Cedex
Phone: + 33 /1/ 69 77 83 83
Fax: +33/1/69778390
E-Mail: info.fr@kennametal.com
GERMANY
Kennametal Deutschland GmbH
Postfach/P.O. Box 1347
61364 Friedrichsdorf
Phone: + 49 / 61 72 / 737-0
Fax: +49/6172/78490
E-Mail:
friedrichsdorf.salesoffice@kennametal.com
HUNGARY
Kennametal Hungaria Kft
H-9021 Györ
Szent István út 10/A
Phone: + 36 / 96 / 618 158
Fax: + 36 / 96 / 618 152
E-Mail: office@kennametal.gyor.hu
ITALY
Kennametal Italia S.p.A.
Via Morivione, 5
20141 Milano
Phone: + 39 / 02 / 89 59 61
Fax: + 39 / 02 / 89 50 06 72
E-Mail: milano.vendite@kennametal.com
NETHERLANDS
Kennametal Nederland B.V.
Postbus 159
6800 AD Arnhem
Phone: +31/0/26 38 44 850
Fax: +31/0/26 38 44 860
E-Mail: arnhem.information@kennametal.com
POLAND
Kennametal Polska, Sp. z o.o.
ul. Kmieca 3
61-654 Poznań
Phone: + 48 61 820 29 11
Fax: + 48 61 828 07 67
E-mail: poznan.sales@kennametal.com
PORTUGAL
KENCI, Lda.
Rua do Negral
Campo
4440-115-Valongo (Portugal)
Phone: + 351/ 22 4119 400
Fax: + 351/ 22 4119 405
E-Mail: portugal@kenci.com
SLOVAKIA
Kennametal, GmbH & Co. KG
Sales Office
Bratislavská 439/18
018 41 Dubnica nad Váhom
Phone: + 421/ 4 24 42 85 22
Fax: +421/424440791
E-Mail: dubnica.sales@kennametal.com
SOUTH AFRICA
Kennametal South Africa (Pty.) Ltd.
P.O. Box 1369
Kempton Park
1620, Gauteng
Republic of South Africa
Phone: +27/11-397-3540
Fax: +27/11-397-3222
E-Mail: kempton.info@kennametal.com
SPAIN
KENCI S.A.
Poligono Ind. Rubi Sur
Avda. Antonio Gaudi, s/n
08191 Rubi (Barcelona)
Phone: + 34 / 93 / 5 86 03 50
Fax: +34/93/6974600
E-Mail: kenci@kenci.com
TURKEY
Kennametal
Kesici Takımlar Sanayi ve Ticaret A.Ω.
Hal Yolu, Sayar iμ Merkezi No: 11/5
34752 Içerenköy – Istanbul
Phone: +90/216/5744780
Fax: +90/216/5740564
E-Mail: info.tr@kennametal.com
UNITED KINGDOM
Kennametal UK limited
PO Box 29
The Pensnett Estate
Kingswinford
West Midlands DY6 7NP
Phone: + 44 /13 84 / 4010 00
Fax: + 44 /13 84 / 40 8015
E-Mail: kingswinford.service@kennametal.com
International Sales & Service
KENNAMETAL GmbH & Co. KG
Postfach/P.O. Box 1751
90707 Fürth
Phone: + 49 / 911 / 97 35-214
Fax: + 49 / 911 / 97 35-606
E-Mail: fuerth.sales@kennametal.com