at the 2008 ESSS South American ANSYS Users Conference.
at the 2008 ESSS South American ANSYS Users Conference.
at the 2008 ESSS South American ANSYS Users Conference.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Clovis Maliska Jr.<br />
<strong>ESSS</strong><br />
08:00 -<br />
08:10 am<br />
Ballroom Ballroom Ballroom Ballroom Ballroom<br />
Foyer<br />
Registr<strong>at</strong>ion Open 7:30 am - 5:00 pm Ballroom Foyer<br />
Keynote Sponsor Keynote<br />
Friday, October 17<br />
Keynote Keynote Sponsor Keynote Break Keynote Sponsor Keynote<br />
Roberto Mendonça<br />
PETROBRAS<br />
08:00 -<br />
08:30 am<br />
Ballroom<br />
Todd McDevitt<br />
<strong>ANSYS</strong>, Inc.<br />
08:10 -<br />
09:20 am<br />
Tim P. Pawlak<br />
<strong>ANSYS</strong>, Inc.<br />
08:30 -<br />
09:20 am<br />
Ballroom<br />
Marcio Ishikawa<br />
Hewlett-Packard<br />
09:20 -<br />
09:50 am<br />
Andre Gardinalli<br />
SGI<br />
09:20 -<br />
09:50 am<br />
Ballroom<br />
Germano Freitas<br />
Instituto Nokia<br />
de Tecnologia<br />
09:50 -<br />
10:20 am<br />
Luiz F. Raminelli<br />
MWM Intern<strong>at</strong>ional<br />
Motores<br />
09:50 -<br />
10:20 am<br />
Ballroom<br />
10:20 -<br />
10:40 am<br />
10:20 -<br />
10:40 am<br />
Ballroom<br />
Foyer<br />
Paulo Machado<br />
FMC Technologies<br />
10:40 -<br />
11:10 am<br />
Ballroom<br />
Leonardo dos Reis<br />
Usiminas<br />
10:40 -<br />
11:10 am<br />
Ballroom<br />
Roberto Brandão<br />
AMD<br />
11:10 -<br />
11:40 am<br />
Ballroom Ballroom<br />
Roberto M<strong>at</strong>tos<br />
Intel<br />
11:10 -<br />
11:40 am<br />
Chris Wolfe<br />
<strong>ANSYS</strong>, Inc.<br />
11:40 am -<br />
12:30 pm<br />
M<strong>at</strong>thias Hörmann<br />
CADFEM GmbH<br />
11:40 am -<br />
12:30 pm<br />
Ballroom Ballroom<br />
Lunch<br />
12:30 -<br />
2:00 pm<br />
Restaurant<br />
Lunch<br />
12:30 pm -<br />
2:00 pm<br />
Restaurant<br />
Technical<br />
Sessions<br />
2:00 -<br />
3:40 pm<br />
Rooms:<br />
Velazquez<br />
Scliar<br />
Pancetti<br />
Technical<br />
Sessions<br />
2:00 -<br />
3:40 pm<br />
Rooms:<br />
Velazquez<br />
Scliar<br />
Pancetti<br />
Break<br />
3:40 -<br />
4:00 pm<br />
Ballroom<br />
Foyer<br />
Break<br />
3:40 -<br />
4:00 pm<br />
Ballroom<br />
Foyer<br />
Technical<br />
Sessions<br />
4:00 -<br />
5:40 pm<br />
Rooms:<br />
Velazquez<br />
Scliar<br />
Pancetti<br />
Technical<br />
Sessions<br />
4:00 -<br />
5:40 pm<br />
Rooms:<br />
Velazquez<br />
Scliar<br />
Pancetti<br />
Copies of some of <strong>the</strong> conference present<strong>at</strong>ions will be available for download following <strong>the</strong> conference.<br />
<strong>Conference</strong> <strong>at</strong>tendees will receive an e-mail containing instructions for accessing <strong>the</strong> download page.<br />
2
<strong>2008</strong> <strong>ESSS</strong> <strong>South</strong> <strong>American</strong><br />
<strong>ANSYS</strong> <strong>Users</strong> <strong>Conference</strong><br />
Inspiring Engineering<br />
Get Inspired!<br />
... <strong>at</strong> <strong>the</strong> <strong>2008</strong> <strong>ESSS</strong> <strong>South</strong> <strong>American</strong> <strong>ANSYS</strong> <strong>Users</strong> <strong>Conference</strong>.<br />
<strong>ANSYS</strong> belives simul<strong>at</strong>ion leads to inspired engineering. We see evidence of this<br />
every day as we engage with our customers around <strong>the</strong> world. At <strong>the</strong> <strong>2008</strong> <strong>ESSS</strong><br />
<strong>South</strong> <strong>American</strong> <strong>ANSYS</strong> <strong>Users</strong> <strong>Conference</strong>, October 14 to 17 in Rio de Janeiro,<br />
RJ, Brazil, you can see for yourself how <strong>ANSYS</strong> is enabling a whole new level of<br />
inspired engineering.<br />
At this conference designers, engineers, analysts and managers will discover:<br />
nHow<br />
solutions from <strong>ANSYS</strong> enable customers to implement true Simul<strong>at</strong>ion<br />
Driven Product Development<br />
nHow<br />
innov<strong>at</strong>ive global companies are using simul<strong>at</strong>ion to inspire <strong>the</strong>ir<br />
engineering designs, resulting in improved products and processes<br />
nNew<br />
ideas and experiential insight from <strong>ESSS</strong>/<strong>ANSYS</strong> team members and<br />
industry experts<br />
Plenary Session page 4<br />
Sponsors page 8<br />
Organiz<strong>at</strong>ion and Support page 9<br />
General Inform<strong>at</strong>ion page 10<br />
Complete Program page 12<br />
3
<strong>2008</strong> <strong>ESSS</strong> <strong>South</strong> <strong>American</strong> <strong>ANSYS</strong> <strong>Users</strong> <strong>Conference</strong>: Inspiring Engineering<br />
Plenary Session<br />
How does a business cre<strong>at</strong>e more innov<strong>at</strong>ive solutions? Plenary session speakers <strong>at</strong><br />
<strong>the</strong> <strong>2008</strong> <strong>ESSS</strong> <strong>South</strong> <strong>American</strong> <strong>ANSYS</strong> <strong>Users</strong> <strong>Conference</strong> address this question.<br />
Set aside Thursday and Friday mornings to hear compelling sucess stories and get a<br />
glimpse into <strong>the</strong> l<strong>at</strong>est trends in product development. Present<strong>at</strong>ions are scheduled for<br />
Ballroom Velazquez.<br />
Todd McDevitt<br />
Corpor<strong>at</strong>e Product Str<strong>at</strong>egy<br />
and Planning<br />
<strong>ANSYS</strong>, Inc.<br />
Tim P. Pawlak<br />
Corpor<strong>at</strong>e Fellow<br />
<strong>ANSYS</strong>, Inc.<br />
<strong>ANSYS</strong> Corpor<strong>at</strong>e and Technology Upd<strong>at</strong>e<br />
Todd McDevitt is a member of <strong>the</strong> Product Str<strong>at</strong>egy and Planning Team<br />
<strong>at</strong> <strong>ANSYS</strong>, Inc. and has more than 10 years experience in designing and<br />
developing commercial CAE software. His areas of expertise include<br />
nonlinear finite element analysis, linear dynamics, and multibody<br />
dynamics. At <strong>ANSYS</strong> his efforts are directed towards facilit<strong>at</strong>ing <strong>the</strong><br />
company's R&D planning process, <strong>the</strong> annual alloc<strong>at</strong>ion of funds for<br />
product development, and <strong>the</strong> str<strong>at</strong>egic decision-making associ<strong>at</strong>ed with<br />
company-wide product and technology objectives. Mr. McDevitt received<br />
his Ph.D. in Mechanical Engineering from <strong>the</strong> University of Michigan and<br />
holds a Professional Engineering license in <strong>the</strong> St<strong>at</strong>e of Michigan.<br />
<strong>ANSYS</strong> Mechanical Products Upd<strong>at</strong>e<br />
Mr. Pawlak has over 25 years of experience in software development. He<br />
obtained bachelors and masters degrees in mechanical engineering <strong>at</strong><br />
West Virginia University. Mr. Pawlak has worked for <strong>ANSYS</strong>, Inc. since<br />
March 1984. At <strong>ANSYS</strong>, Inc. Mr. Pawlak has developed simul<strong>at</strong>ion<br />
technology in a variety of simul<strong>at</strong>ion areas including electromagnetic<br />
fields, stress analysis, optimiz<strong>at</strong>ion methods, contact mechanics, and<br />
multibody dynamics. He currently helps guide <strong>the</strong> design and<br />
development of <strong>ANSYS</strong> Workbench.<br />
4
Chris Wolfe<br />
Product Manager, Fluids<br />
Business Unit<br />
<strong>ANSYS</strong>, Inc.<br />
Leonardo Camilo dos Reis<br />
Research and<br />
Development Engineer<br />
Usiminas<br />
October 14 - 17, <strong>2008</strong>, Rio de Janeiro, RJ, Brazil<br />
<strong>ANSYS</strong> CFD Product Upd<strong>at</strong>e<br />
Chris is a senior product manager in <strong>the</strong> Fluids Business Unit <strong>at</strong> <strong>ANSYS</strong>,<br />
Inc. Chris has been <strong>the</strong> product manager for FLUENT since April 2005,<br />
after joining <strong>the</strong> FLUENT product management team in May of 2004. She<br />
is responsible for prioritizing market requirements and working with <strong>the</strong><br />
FLUENT development team to address market needs in all industry<br />
sectors. She also works on product promotion activities and<br />
communic<strong>at</strong>es new FLUENT fe<strong>at</strong>ures and benefits to customers, <strong>ANSYS</strong><br />
support staff and <strong>the</strong> <strong>ANSYS</strong> sales channel. Before joining product<br />
management, Chris was a support engineer on <strong>the</strong> chemicals industry<br />
team <strong>at</strong> Fluent. Prior to joining Fluent in 2002, Chris worked <strong>at</strong> DuPont,<br />
most recently as an Internal Consultant in DuPont's Engineering<br />
Technology division where she applied FLUENT to a variety of problems.<br />
Chris earned both her bachelor's and master's degrees in Chemical<br />
Engineering from <strong>the</strong> University of Rochester and is currently a MBA<br />
student <strong>at</strong> Nor<strong>the</strong>astern University.<br />
Advanced Numerical Simul<strong>at</strong>ion <strong>at</strong> Usiminas R&D Center<br />
Leonardo Camilo dos Reis is Mechanical Engineer with 13 years of<br />
experience and holds degree in Metallurgical Engineering<br />
(M.Sc.).Nowadays he is working as a research engineer <strong>at</strong> <strong>the</strong> Usiminas´<br />
Research and Development Center - in Ip<strong>at</strong>inga (Brazil). Leonardo<br />
develops comput<strong>at</strong>ional analysis of products and processes using<br />
<strong>ANSYS</strong> in <strong>the</strong> structural, <strong>the</strong>rmal and fluid dynamics fields. He<br />
coordin<strong>at</strong>es <strong>the</strong> numerical comput<strong>at</strong>ional simul<strong>at</strong>ion team <strong>at</strong> <strong>the</strong><br />
Usiminas’ R&D Center and provides technical assistance to <strong>the</strong><br />
production departments as well as to <strong>the</strong> company´s customers and also<br />
consulting services to o<strong>the</strong>r steel companies in L<strong>at</strong>in America. He<br />
performs stress measurements with strain gages of equipments and<br />
parts for posterior simul<strong>at</strong>ion with finite element technique.<br />
5
<strong>2008</strong> <strong>ESSS</strong> <strong>South</strong> <strong>American</strong> <strong>ANSYS</strong> <strong>Users</strong> <strong>Conference</strong>: Inspiring Engineering<br />
M<strong>at</strong>thias Hörmann<br />
Simul<strong>at</strong>ion Engineer for<br />
LS-DYNA<br />
CADFEM GmbH<br />
Germano Freitas<br />
Manager of <strong>the</strong> Mechanical<br />
Testing Area<br />
Instituto Nokia de<br />
Tecnologia<br />
Luiz Fernando Raminelli<br />
Design Supervisor<br />
MWM Intern<strong>at</strong>ional<br />
Motores<br />
Applic<strong>at</strong>ions with LS-DYNA<br />
Dr. Hörmann is <strong>the</strong> simul<strong>at</strong>ion engineer <strong>at</strong> CADFEM GmbH for product<br />
LS-DYNA & <strong>ANSYS</strong>/LS-DYNA since 2003. He passed with distinction in<br />
civil engineering <strong>at</strong> <strong>the</strong> University of Stuttgart (1992) and holds degree<br />
(Ph.D) <strong>at</strong> <strong>the</strong> Institute of Structural Mechanics from University of Stuttgart<br />
(2002).<br />
New trends in portable electronics<br />
Germano Freitas gradu<strong>at</strong>ed in Mechanical Engineering (1997) and holds<br />
degree (Ph.D.) in Naval Engineering (2003) <strong>at</strong> <strong>the</strong> University of São<br />
Paulo (USP). Germano has over ten years of experience in numerical<br />
simul<strong>at</strong>ions and mechanical testing. Nowadays he is <strong>the</strong> Technical<br />
Manager of <strong>the</strong> Mechanics Group <strong>at</strong> <strong>the</strong> Nokia Institute of Technology<br />
(Brazil) and coordin<strong>at</strong>es a multidisciplinary team working on intern<strong>at</strong>ional<br />
projects focusing on <strong>the</strong> mechanical reliability of electronic components.<br />
Numerical Simul<strong>at</strong>ions <strong>at</strong> MWM-Intern<strong>at</strong>ional Motores<br />
Luiz Fernando Raminelli studied Aeronautical Engineering <strong>at</strong> ITA (1983)<br />
and holds degrees from UFSC and UNICAMP. He has 24 years of<br />
experience in <strong>the</strong> aerospace, machinery and automotive industries.<br />
Raminelli is currently <strong>the</strong> Engineering Design Supervisor <strong>at</strong> MWM-<br />
Intern<strong>at</strong>ional Motores. He coordin<strong>at</strong>es <strong>the</strong> Advanced Analysis and<br />
Simul<strong>at</strong>ions area <strong>at</strong> <strong>the</strong> Engines Design Department.<br />
6
Roberto V. D. Mendonça<br />
Equipments Engineering<br />
Manager<br />
PETROBRAS<br />
Paulo Roberto Machado<br />
FEA Coordin<strong>at</strong>or<br />
FMC Technologies<br />
Get Inspired...<br />
October 14 - 17, <strong>2008</strong>, Rio de Janeiro, RJ, Brazil<br />
<strong>ANSYS</strong> Software Usage in CENPES Equipments Department<br />
Roberto Mendonça gradu<strong>at</strong>ed in mechanical engineering <strong>at</strong> UERJ (1973)<br />
and has specialized in pressure vessels and structures projects. He<br />
joined Petrobras in1974 where he worked <strong>at</strong> <strong>the</strong> Landulpho Alves<br />
Refinery (RLAM). During his work <strong>at</strong> <strong>the</strong> CENPES Basic Engineering he<br />
has particip<strong>at</strong>ed in more than 800 projects in Refining Units. Roberto<br />
Mendonça is currently <strong>the</strong> Equipments Engineering Manager <strong>at</strong> CENPES<br />
(Petrobras Research Center).<br />
CAE in <strong>the</strong> Development of Subsea Equipments for <strong>the</strong> Oil and<br />
Gas Industry<br />
Paulo Machado gradu<strong>at</strong>ed in Civil Engineering and holds degree (M.Sc.)<br />
in Technology in Explor<strong>at</strong>ion and Exploit<strong>at</strong>ion of Oil and Gas <strong>at</strong> <strong>the</strong><br />
Federal University of Rio de Janeiro (UFRJ). He is <strong>the</strong> author of several<br />
papers <strong>at</strong> OMAE (Intern<strong>at</strong>ional <strong>Conference</strong> on Ocean, Offshore and<br />
Arctic Engineering) and Intern<strong>at</strong>ional Pipeline <strong>Conference</strong>. Paulo Roberto<br />
Machado was involved on several CENPES/UFRJ research projects. He<br />
joined FMC Technologies in 2004 as a Finite Element Specialist.<br />
Nowadays he coordin<strong>at</strong>es <strong>the</strong> FMC Team - responsible for simul<strong>at</strong>ions<br />
based on finite element method. He is also <strong>the</strong> responsible for <strong>the</strong><br />
<strong>the</strong>rmal insul<strong>at</strong>ion systems of Shell and Petrobras projects.<br />
7
<strong>2008</strong> <strong>ESSS</strong> <strong>South</strong> <strong>American</strong> <strong>ANSYS</strong> <strong>Users</strong> <strong>Conference</strong>: Inspiring Engineering<br />
Sponsors<br />
SGI (NASDAQ: SGIC) is a leader in high-performance computing. SGI<br />
®<br />
delivers a complete range of high-performance server and storage<br />
solutions along with industry-leading professional services and support<br />
th<strong>at</strong> enable its customers to overcome <strong>the</strong> challenges of complex d<strong>at</strong>aintensive<br />
workflows and acceler<strong>at</strong>e breakthrough discoveries, innov<strong>at</strong>ion<br />
and inform<strong>at</strong>ion transform<strong>at</strong>ion. SGI helps customers solve significant challenges.<br />
Visit www.sgi.com for more inform<strong>at</strong>ion.<br />
At Intel, we recognize th<strong>at</strong> you need more than just processors th<strong>at</strong><br />
®<br />
deliver gre<strong>at</strong>er performance for your engineering simul<strong>at</strong>ion applic<strong>at</strong>ions.<br />
Along with industry-leading microprocessor technology, Intel delivers<br />
pl<strong>at</strong>form technology solutions th<strong>at</strong> combine processor, chipset, and<br />
software which optimize performance and improve throughput, giving<br />
engineering and scientific professionals <strong>the</strong> ability to solve problems faster, process larger d<strong>at</strong>a<br />
sets, and meet design challenges more effectively. Visit www.intel.com for more inform<strong>at</strong>ion.<br />
Hewlett-Packard delivers HPC solutions th<strong>at</strong> meet <strong>the</strong> diverse needs of<br />
CAE. Setting <strong>the</strong> standard for innov<strong>at</strong>ion and collabor<strong>at</strong>ion, HP’s broad<br />
portfolio of workst<strong>at</strong>ions, servers, and cluster pl<strong>at</strong>forms are based on a<br />
variety of architectures and oper<strong>at</strong>ing systems. Through technical<br />
advances in server density, power efficiency, storage management and<br />
d<strong>at</strong>a center services, HP helps customers manage and transform <strong>the</strong>ir<br />
technology environments to deliver better business outcomes. These innov<strong>at</strong>ions are why HP’s<br />
blade servers are domin<strong>at</strong>ing computing architectures on <strong>the</strong> TOP500 list. HP and our trusted<br />
partners - especially leading independent software vendors, such as <strong>ANSYS</strong> - offer powerful<br />
technical solutions for CAE. Visit www.hp.com for more inform<strong>at</strong>ion.<br />
Advanced Micro Devices (NYSE: AMD) is a leading global provider<br />
of innov<strong>at</strong>ive processing solutions in <strong>the</strong> computing, graphics and<br />
consumer eletronics markets. AMD is dedic<strong>at</strong>ed to driving open<br />
innov<strong>at</strong>ion, choice and industry growth by delivering superior customer-centric solutions th<strong>at</strong><br />
empower consumers and businesses worldwide. Visit www.amd.com for more inform<strong>at</strong>ion.<br />
8
October 14 - 17, <strong>2008</strong>, Rio de Janeiro, RJ, Brazil<br />
Organiz<strong>at</strong>ion<br />
Engineering Simul<strong>at</strong>ion and Scientific Software brings leading-edge<br />
technology for numerical simul<strong>at</strong>ion of engineering problems and<br />
scientific software development to <strong>the</strong> market. The Company<br />
develops customized solutions and provides CAE best-of-class<br />
software sales, training and consultancy. Our services began in 1995 developing solutions for<br />
Petrobras S.A., one of <strong>the</strong> most important companies in Brazil.<br />
The Company has grown over <strong>the</strong> years, expanding its services to a broad range of industries<br />
including Metallurgy, Automotive, Power Gener<strong>at</strong>ion, HVAC & Refriger<strong>at</strong>ion, Turbomachinery,<br />
Chemical Processes, Aerospace, Mechanical Processes, Packaging, Electrical Household<br />
Appliances and Environment.<br />
Nowadays <strong>ESSS</strong> has more than 200 customers throughout <strong>South</strong> America and our software<br />
portfolio includes solutions for Comput<strong>at</strong>ional Fluid Dynamics, Structural Analysis, Scientific<br />
Visualiz<strong>at</strong>ion, Particle Simul<strong>at</strong>ion, Multidisciplinary Optimiz<strong>at</strong>ion, Microstructural<br />
Characteriz<strong>at</strong>ion, Geology and Reservoir Engineering. Headquartered in Florianópolis, Brazil,<br />
<strong>ESSS</strong> has offices in São Paulo (SP), Rio de Janeiro (RJ) and Santiago, Chile.<br />
Visit www.esss.com.br for more inform<strong>at</strong>ion.<br />
Support<br />
<strong>ANSYS</strong>, Inc., founded in 1970, develops and globally markets<br />
engineering simul<strong>at</strong>ion software and technologies widely used by<br />
engineers and designers across a broad spectrum of industries.<br />
The Company focuses on <strong>the</strong> development of open and flexible<br />
solutions th<strong>at</strong> enable users to analyze designs directly on <strong>the</strong> desktop, providing a common<br />
pl<strong>at</strong>form for fast, efficient and cost-conscious product development, from design concept to<br />
final-stage testing and valid<strong>at</strong>ion. The Company and its global network of channel partners<br />
provide sales, support and training for customers. Headquartered in Canonsburg,<br />
Pennsylvania, U.S.A., with more than 60 str<strong>at</strong>egic sales loc<strong>at</strong>ions throughout <strong>the</strong> world,<br />
<strong>ANSYS</strong>, Inc. and its subsidiaries employ approxim<strong>at</strong>ely 1,700 people and distribute <strong>ANSYS</strong><br />
products through a network of channel partners in over 40 countries.<br />
Visit www.ansys.com for more inform<strong>at</strong>ion.<br />
9
<strong>2008</strong> <strong>ESSS</strong> <strong>South</strong> <strong>American</strong> <strong>ANSYS</strong> <strong>Users</strong> <strong>Conference</strong>: Inspiring Engineering<br />
General Inform<strong>at</strong>ion<br />
Present<strong>at</strong>ion<br />
Area<br />
Present<strong>at</strong>ion<br />
Area<br />
Convention Center - Fifth Floor<br />
VELAZQUEZ<br />
Convention Center - Third Floor<br />
SCLIAR<br />
PANCETTI<br />
FOYER<br />
10<br />
Exhibition<br />
Area
Venue<br />
Guanabara Palace Hotel<br />
Av. Presidente Vargas, 392 - Centro<br />
CEP 22071-000 - Rio de Janeiro, RJ, Brazil<br />
Phone: 55 (21) 2195-6000<br />
October 14 - 17, <strong>2008</strong>, Rio de Janeiro, RJ, Brazil<br />
<strong>Conference</strong> Registr<strong>at</strong>ion Desk - Loc<strong>at</strong>ed in <strong>the</strong> Ballroom Foyer<br />
Thursday, October 16 7:30 a.m. - 5:00 p.m.<br />
Friday, October 17 7:30 a.m. - 5:00 p.m.<br />
Badges<br />
Upon registr<strong>at</strong>ion, you will receive a badge. We ask th<strong>at</strong> you wear your badge <strong>at</strong> all times<br />
during <strong>the</strong> conference and social, as admittance is restricted to badge holders only. If you lose<br />
your badge, a replacement badge can be made for you <strong>at</strong> <strong>the</strong> Registr<strong>at</strong>ion Desk for free.<br />
Lunch Toge<strong>the</strong>r<br />
Your chance to learn and network can continue throughout lunch. Join an <strong>ESSS</strong><br />
represent<strong>at</strong>ive and handful of your colleagues to talk informally about engineering simul<strong>at</strong>ion<br />
subjects. The lunchtime allows you <strong>the</strong> opportunity to talk about problems, hear how peers<br />
find solutions and offer suggestions for future releases.<br />
Lunch is served both days <strong>at</strong> <strong>the</strong> restaurant loc<strong>at</strong>ed on <strong>the</strong> 2nd floor of <strong>the</strong> Guanabara Hotel<br />
building.<br />
11
<strong>2008</strong> <strong>ESSS</strong> <strong>South</strong> <strong>American</strong> <strong>ANSYS</strong> <strong>Users</strong> <strong>Conference</strong>: Inspiring Engineering<br />
Thursday Morning - October, 16<br />
Registr<strong>at</strong>ion Open 7:30 am - 17:00 pm Ballroom Foyer<br />
08:00 - 08:10 am 08:10 - 09:20 am 09:20 - 09:50 am 09:50 - 10:20 am<br />
Opening Session<br />
Clovis Maliska Jr.<br />
<strong>ESSS</strong><br />
Keynote Sponsor<br />
Ballroom Ballroom Ballroom<br />
Ballroom<br />
Thursday Afternoon - October, 16<br />
Industry/Chairs<br />
Oil & Gas<br />
Velazques, 5th floor<br />
Roberto Silva /<br />
Fabio Ressel<br />
Civil Engineering /<br />
Industrial Equipment<br />
Scliar, 3rd floor<br />
Jean Paul Kabche /<br />
Ren<strong>at</strong>o Leão<br />
Automotive<br />
Pancetti, 3rd floor<br />
Regis Ataídes /<br />
Fabiano Diesel<br />
Temper<strong>at</strong>ure Distribution<br />
Modeling in <strong>the</strong> Friction<br />
Stir Welding (FSW)<br />
Process using <strong>the</strong> Finite<br />
Element Method<br />
Rodrigo André Hoppe<br />
Petrobras<br />
Davi M<strong>at</strong>arasso<br />
Ventil<strong>at</strong>ion Shaft of<br />
CMSP Line 4 - Yellow<br />
Eduardo F. Barbosa,<br />
Cláudio Prado,<br />
Luiz Antônio Chiereghini<br />
e Rafael Yamamoto<br />
Enerconsult S.A.<br />
Camber Angle Vari<strong>at</strong>ion<br />
of a Commercial Vehicle<br />
Daniel Luchete Roque<br />
SIFCO<br />
Todd McDevitt<br />
<strong>ANSYS</strong>, Inc.<br />
<strong>ANSYS</strong> Corpor<strong>at</strong>e and<br />
Technology Upd<strong>at</strong>e<br />
Advanced Civil<br />
Engineering Projects<br />
with <strong>ANSYS</strong>-CivilFEM<br />
Andrés Gonzales<br />
<strong>ESSS</strong><br />
Numerical Simul<strong>at</strong>ion of<br />
Fluid Flow Inside a<br />
Valve for an Automotive<br />
Shock Absorber<br />
Robson Iezzo<br />
Magneti Marelli Cofap<br />
12<br />
Marcio Ishikawa<br />
Hewlett-Packard<br />
F<strong>at</strong>igue Life Assessment<br />
of welded Joints based<br />
on Finite Element<br />
Analysis<br />
Keurrie Cipriano Goes<br />
ArvinMeritor<br />
Virtual Valid<strong>at</strong>ion of an<br />
Intake Manifold<br />
Francisco Hélio Alencar<br />
Oliveira<br />
Continental Brasil<br />
Industria Automotiva Ltda.<br />
Keynote<br />
Germano Freitas<br />
Instituto Nokia de Tecnologia<br />
New Trends in Portable<br />
Electronics<br />
2:00 - 2:20 pm 2:20 - 2:40 pm 2:40 - 3:00 pm 3:00 - 3:20 pm 3:20 - 3:40 pm<br />
Orifice Constraints<br />
Analysis in W<strong>at</strong>er<br />
Injection Pipes using<br />
CFD<br />
Daniel Fonseca de<br />
Carvalho e Silva<br />
Petrobras<br />
Fluid Dynamics and<br />
Erosion of FCC<br />
Turboexpander Main<br />
Bypass Valve System<br />
Ricardo Medronho<br />
UFRJ<br />
The Tertiary Air<br />
Turbulent Mixing and <strong>the</strong><br />
Effect of <strong>the</strong> Qu<strong>at</strong>ernary<br />
Air on <strong>the</strong> Gas Flow in a<br />
Kraft Boiler<br />
Song Won Park<br />
USP<br />
High Oil Content<br />
Hydrocyclone<br />
Numerical Flow<br />
Simul<strong>at</strong>ion<br />
Gelmirez M. Raposo<br />
Petrobras<br />
CFD Tools Usage to<br />
Enhance Performance<br />
of Environmental<br />
Control Systems<br />
Johnny Gerodo<br />
Alstom Brasil Energia e<br />
Transporte Ltda.<br />
Analysis of a N<strong>at</strong>ural<br />
Gas Compressible Flow<br />
through an Annular<br />
Space with Restrictions<br />
Juliana Teixeira do<br />
Nascimento<br />
UFRJ<br />
Hydraulic Analysis in<br />
Radial G<strong>at</strong>es using<br />
Comput<strong>at</strong>ional Fluid<br />
Dynamics<br />
Harley Souza Alencar<br />
Alstom Hydro Energia<br />
Brasil Ltda.<br />
CFD: A New Challenge<br />
for Tenneco<br />
Erika Carolina Soares<br />
Tenneco Automotive<br />
Brasil Ltda.
Ballroom<br />
Foyer<br />
Break<br />
Ballroom<br />
Foyer<br />
October 14 - 17, <strong>2008</strong>, Rio de Janeiro, RJ, Brazil<br />
10:20 - 10:40 am 10:40 - 11:10 am 11:10 - 11:40 am 11:40 am - 12:30 pm<br />
12:30 - 14:00 pm<br />
Break Keynote Sponsor<br />
Keynote<br />
Lunch<br />
3:40 - 4:00 pm<br />
Industry/Chairs<br />
Industrial Equipment<br />
Velazques, 5th floor<br />
Fabiano Diesel /<br />
Regis Ataídes<br />
Electric /<br />
Turbomachinary<br />
Scliar, 3rd floor<br />
Jean Paul Kabche /<br />
Ren<strong>at</strong>o Leão<br />
Oil & Gas<br />
Pancetti, 3rd floor<br />
Roberto Silva /<br />
Fabio Ressel<br />
Paulo R. Machado<br />
FMC Technologies<br />
CAE in <strong>the</strong> Development of<br />
Subsea Equipment for <strong>the</strong><br />
Oil and Gas Industry<br />
Roberto Brandão<br />
AMD<br />
Ballroom Ballroom Ballroom<br />
13<br />
Chris Wolfe<br />
<strong>ANSYS</strong>, Inc.<br />
<strong>ANSYS</strong> CFD Product Upd<strong>at</strong>e<br />
Restaurant<br />
4:00 - 4:20 pm 4:20 - 4:40 pm 4:40 - 5:00 pm 5:00 - 5:20 pm 5:20 - 5:40 pm<br />
SiC Furnace Support<br />
Thermal-Structural<br />
Analysis<br />
Fabiano Diesel<br />
<strong>ESSS</strong><br />
Developing a Centrifugal<br />
Start Switch for<br />
High Starting Torque<br />
Single Phase Motors<br />
João Gustavo Togneri<br />
WEG - Divisão Motores<br />
Sliding Sleeves<br />
Flowfield Analysis in<br />
Horizontal Gas Wells<br />
Umberto Sansoni Jr.<br />
Petrobras<br />
Analysis and Design<br />
of Inciner<strong>at</strong>ors using<br />
CFD<br />
Marcelo Pereira Coelho<br />
UFV<br />
Asymptotic Model of<br />
<strong>the</strong> Three-Dimensional<br />
Flow in a Progressive<br />
Cavity Pump<br />
Juliana Vianna Valerio<br />
PUC-RJ<br />
Comput<strong>at</strong>ional<br />
Modeling of Jet Fires<br />
Norman A. M. Neumann,<br />
Bureau Veritas<br />
Employing CFD for<br />
Optimizing Hydrocyclone<br />
Geometry for<br />
<strong>the</strong> Separ<strong>at</strong>ion of<br />
Oil-W<strong>at</strong>er Dispersions<br />
from Oil Refineries<br />
Juliana Nascimento<br />
UFRJ<br />
<strong>ANSYS</strong> Workbench<br />
Applied to Thermal<br />
Analysis<br />
Fabiano Knopp Kerstner<br />
WEG - Divisão Motores<br />
Near Wellbore Flow<br />
Modeling<br />
Umberto Sansoni Jr.<br />
Petrobras<br />
Guidelines on<br />
Numerical Modeling<br />
of Cyclones and<br />
Hydrocyclones<br />
João Américo Aguirre<br />
Oliveira Jr.<br />
<strong>ESSS</strong><br />
Gas Turbine Combustion<br />
Chamber Thermal-<br />
Aerodynamics and<br />
Emission Assessment<br />
Using Numerical Simul<strong>at</strong>ion<br />
for Different Fuels<br />
Lucilene Rodrigues<br />
UNIFEI<br />
Structural Integrity<br />
Assessment of<br />
Corroded LPG Sphere<br />
Legs<br />
Rodrigo André Hoppe<br />
Petrobras<br />
Simul<strong>at</strong>ion of<br />
Non-Homogeneous<br />
Airflow through Maize<br />
Grains (Zea mays L.)<br />
Stored in Metallic Bin<br />
Michel Oliveira Santos<br />
UFV<br />
TEFC Electric Motors:<br />
CFD-based Design<br />
Valid<strong>at</strong>ion<br />
Cassiano A. Cezário<br />
WEG - Divisão Motores<br />
X-Mas Tree Meg<br />
Injection and Pressure<br />
Transducer Positioning<br />
using CFX<br />
Mauricio O. Brandão<br />
FMC Technologies
<strong>2008</strong> <strong>ESSS</strong> <strong>South</strong> <strong>American</strong> <strong>ANSYS</strong> <strong>Users</strong> <strong>Conference</strong>: Inspiring Engineering<br />
Friday Morning - October, 17<br />
Registr<strong>at</strong>ion Open 7:30 am - 17:00 pm Ballroom Foyer<br />
08:00 - 08:30 am 08:30 - 09:20 am 09:20 - 09:50 am 09:50 - 10:20 am<br />
Keynote Keynote Sponsor<br />
Keynote<br />
Roberto Mendonça<br />
PETROBRAS<br />
<strong>ANSYS</strong> Software Usage in<br />
CENPES Equipments Department<br />
Tim P. Pawlak<br />
<strong>ANSYS</strong>, Inc.<br />
<strong>ANSYS</strong> Mechanical Products<br />
Upd<strong>at</strong>e<br />
Ballroom Ballroom Ballroom<br />
Ballroom<br />
Friday Afternoon - October, 17<br />
Industry/Chairs<br />
Metals, Minerals and<br />
Mining / Industrial<br />
Equipment<br />
Velazques, 5th floor<br />
Fabiano Diesel /<br />
Regis Ataídes<br />
Oil & Gas<br />
Scliar, 3rd floor<br />
Roberto Silva /<br />
Ren<strong>at</strong>o Leão<br />
Chemical<br />
Processing<br />
Pancetti, 3rd floor<br />
Fábio Ressel /<br />
Jean Paul Kabche<br />
Thermal-Structural<br />
Analysis of Steel Ladle<br />
using <strong>the</strong> Finite Element<br />
Method<br />
Herbert A. dos Santos<br />
Magnesita Refr<strong>at</strong>ários S.A.<br />
Non Linear Wave Impact<br />
Inside a Reservoir<br />
Paolo Contim Nicol<strong>at</strong>o<br />
UFF<br />
CFD Simul<strong>at</strong>ion of a<br />
Vertical He<strong>at</strong> Exchanger<br />
Roberto Silva de Oliveira<br />
Eletronuclear S.A.<br />
An Ansys Interface for<br />
FE Solid Modeling and<br />
Burst Analysis of<br />
Corroded Pipelines<br />
Rita de Cássia C. Silva<br />
LNCC/MCT<br />
Electrost<strong>at</strong>ic<br />
Precipit<strong>at</strong>ors Simul<strong>at</strong>ed<br />
with Fluent<br />
Ren<strong>at</strong>a Cristina Favalli<br />
Greco-Enfil Equipamentos<br />
Termoindustriais Ltda.<br />
14<br />
Andre Gardinalli<br />
SGI<br />
Residual Stress Analysis<br />
in Welded Steel Pl<strong>at</strong>es<br />
with Single and Two-pass<br />
Weld Beads using <strong>the</strong><br />
Finite Element Method<br />
Maicon Maia Lemos<br />
CEFET-RJ<br />
Characteristic Time<br />
Scales for an Eulerian-<br />
Lagrangian Multiphase<br />
Flow Model in Vacuum<br />
Towers<br />
Karolline Ropel<strong>at</strong>o<br />
<strong>ESSS</strong><br />
Optimiz<strong>at</strong>ion of Gantry<br />
Crane for Mechanical<br />
Processes Industry<br />
Luis Peñalver<br />
Consultora de Ingeniería<br />
Peñalver, C.A.<br />
Constructal Design of<br />
Shapes Based on<br />
Bejan's Constructal<br />
Theory<br />
Luiz Alberto Oliveira<br />
Rocha<br />
FURG<br />
Luiz Fernando Raminelli<br />
MWM Intern<strong>at</strong>ional Motores<br />
Numerical Simul<strong>at</strong>ions <strong>at</strong><br />
MWM-Intern<strong>at</strong>ional Motores<br />
2:00 - 2:20 pm 2:20 - 2:40 pm 2:40 - 3:00 pm 3:00 - 3:20 pm 3:20 - 3:40 pm<br />
Flexibility in Non Radial<br />
Nozzles on Pressure<br />
Vessels<br />
Luis Fernando C. Garcia<br />
Alb<strong>at</strong>ros Ingenieria<br />
Numerical Simul<strong>at</strong>ion of<br />
Fluid Flow Inside a<br />
CDQ´S Boiler of<br />
ArcelorMittal Tubarão<br />
Rafael Sartim<br />
ArcelorMittal Tubarão<br />
Numerical Simul<strong>at</strong>ion of<br />
a Gravit<strong>at</strong>ional Separ<strong>at</strong>or,<br />
Euler-Lagrange and<br />
Euler-Euler approaches<br />
João Américo Aguirre<br />
Oliveira Jr.<br />
<strong>ESSS</strong><br />
Analysis of Efficiency of<br />
<strong>the</strong> Argon Injection in<br />
Steel Ladle through<br />
Lances and Plugs<br />
Bruno Augusto B<strong>at</strong>ista<br />
Ribeiro<br />
Magnesita Refr<strong>at</strong>ários S.A.<br />
CFD Modeling of Vortex<br />
Induced Vibr<strong>at</strong>ion for<br />
Flexible Risers<br />
Erico Almeida Santos<br />
Petrobras<br />
Eulerian-Eulerian<br />
Simul<strong>at</strong>ions of<br />
Gas-Liquid Bubbly<br />
Flows<br />
Milton Mori<br />
Unicamp
Ballroom<br />
Foyer<br />
October 14 - 17, <strong>2008</strong>, Rio de Janeiro, RJ, Brazil<br />
10:20 - 10:40 am 10:40 - 11:10 am 11:10 - 11:40 am 11:40 am - 12:30 pm<br />
12:30 - 14:00 pm<br />
Break Keynote Sponsor<br />
Keynote<br />
Lunch<br />
3:40 - 4:00 pm Industry/Chairs<br />
Break<br />
Ballroom<br />
Foyer<br />
Aerospace / Composite<br />
and Specialty M<strong>at</strong>erials /<br />
Automotive<br />
Velazques,5th floor<br />
Jean Paul Kabche /<br />
Regis Ataídes<br />
Marine and Offshore<br />
Scliar, 3rd floor<br />
Roberto Silva /<br />
Fabio Ressel<br />
Biomedical and<br />
Pharmaceutical /<br />
Marine and Offshore<br />
Pancetti, 3rd floor<br />
Fabiano Diesel /<br />
Ren<strong>at</strong>o Leão<br />
Leonardo C. dos Reis<br />
Usiminas<br />
Advanced Numerical Simul<strong>at</strong>ion<br />
<strong>at</strong> Usiminas R&D Center<br />
Roberto M<strong>at</strong>tos<br />
Intel<br />
Ballroom Ballroom Ballroom<br />
4:00 - 4:20 pm 4:20 - 4:40 pm 4:40 - 5:00 pm 5:00 - 5:20 pm 5:20 - 5:40 pm<br />
Academic Works<br />
using CFD<br />
Commercial Codes<br />
Edson L. Zaparoli<br />
ITA<br />
CFD Simul<strong>at</strong>ion of <strong>the</strong><br />
Flow Past a Marine<br />
Propeller<br />
Alexandre Teixeira de<br />
Pinho Alho<br />
UFRJ<br />
Methodology for<br />
Modeling and Analysis<br />
of Biological<br />
Structures using<br />
<strong>ANSYS</strong> Workbench<br />
Marco André Argenta<br />
UFPR<br />
Cabin Thermal<br />
Comfort Analysis with<br />
Numerical Manikins<br />
Allan Oliveira<br />
Embraer<br />
Numerical Simul<strong>at</strong>ion<br />
and F<strong>at</strong>igue Modeling<br />
in Mooring<br />
Components<br />
Fernando Alonso Fontes<br />
Acergy-Group<br />
Analytic and Finite<br />
Element Stress<br />
Analysis in Human<br />
Long Bones<br />
Ivan Ivanovitsch Thesi<br />
Riagusoff<br />
<strong>ESSS</strong><br />
15<br />
M<strong>at</strong>thias Hörmann<br />
CADFEM GmbH<br />
Applic<strong>at</strong>ions with LS-DYNA<br />
The Finite Element<br />
Stress of a Interlaminar<br />
Shear Strenght<br />
(ILSS) of a Acarbon<br />
Fiber Reiforced Polymeric<br />
Composite<br />
Kira Fukushima Beim<br />
Tresca Engenharia<br />
Substitution of Anchor<br />
Moorings of a Semi-<br />
Submersible Pl<strong>at</strong>form<br />
using <strong>the</strong> Chain<br />
Stopper Temporary<br />
Support<br />
Gilson Gomes da Silva<br />
Petrobras<br />
Numerical Analysis of<br />
Cracked Stud Bolts<br />
using <strong>the</strong> Finite<br />
Element Method<br />
Luiz Carlos Largura Jr.<br />
Petrobras<br />
Methodology to<br />
Estim<strong>at</strong>e Life in<br />
Structures<br />
Cristiano Moreira<br />
Domingues<br />
John Deere Brasil<br />
Numerical Analysis of<br />
<strong>the</strong> Flow inside <strong>the</strong><br />
Moonpool of a<br />
Monocolumn Pl<strong>at</strong>form<br />
Alexandre Teixeira de<br />
Pinho Alho<br />
UFRJ<br />
L<strong>at</strong>eral Buckling<br />
Analysis of Subsea<br />
Pipelines<br />
Daniel Lyrio Carneiro<br />
Bureau Veritas<br />
Restaurant<br />
ThyssenKrupp<br />
Connecting Rod<br />
Structure Analysis<br />
Giovanni de M. Teixeira<br />
<strong>ESSS</strong><br />
Fluid-Structure<br />
Interaction in a Wedge<br />
Plug Valve Loc<strong>at</strong>ed in<br />
a Process Plant<br />
Paulo H. A. Walter Filho<br />
<strong>ESSS</strong><br />
Evalu<strong>at</strong>ion of a TIG<br />
Butt Weld Joint Using<br />
API 5L X-60 Steel<br />
Paloma P. S. Coelho<br />
CEFET-RJ
<strong>ESSS</strong> thanks <strong>the</strong> sponsors of <strong>the</strong><br />
®<br />
®<br />
o<br />
Rodovia SC 401, Km 01, n 600<br />
Parquetec Alfa - Edifício Celta - Sl. 4.01<br />
Bairro João Paulo - CEP 88030-000<br />
Florianópolis - SC - Brasil<br />
Tel/Fax: +55 (48) 3953 0000<br />
www.esss.com.br
Change language