SY250F Chassis - Scorpa

More documents

Recommendations

Info

Manuel de l’ <strong>Chassis</strong> 10 Rear brake : 14
Manuel de l’ <strong>Chassis</strong> 10.1 Rear brake control removal : • Remove the rear wheel (see “rear wheel removal”). • Remove the rear brake calliper. • Unscrew the rear brake pedal bolt. • Take out the bolt and remove the pedal. • Unscrew the liquid container screw. • Warning : the liquid container must be kept with the cap upwards to avoid the air bleed. • Unscrew the 2 rear brake master cylinder fixing bolts and remove it. • To remove the brake hose : unscrew the master cylinder fixing hose fixing bolt then unscrew the slave cylinder hose fixing bolt (Warning : the liquid is corrosive for the painting and dangerous for the body). 10.2 Rear brake control installation : • To install the hose : screw the pipe portion bolt to the master cylinder after changing the washer seals, then screw the pipe portion bolt the slave cylinder after changing the washer seals. • Install the rear master cylinder and the 2 fixing bolts. • Install the liquid container then screw the two fixing bolts. • Lubricate the brake pedal spacer. • Install the brake pedal and install the fixing bolt. • Screw the pedal axle nut. • Install the rear brake calliper. • Install the rear wheel (see “rear wheel installation”). • Warning : if the hose has been removed, you must air bleed the front brake control. 15
Page 1 and 2: Manuel de l’ Chassis Chassis 1
Page 3 and 4: Manuel de l’ Chassis 15 CLUTCH CO
Page 5 and 6: Manuel de l’ Chassis 2 Plastics :
Page 7 and 8: Manuel de l’ Chassis 4 Air cleane
Page 9 and 10: Manuel de l’ Chassis 6 Muffler :
Page 11 and 12: Manuel de l’ Chassis 8 Rear wheel
Page 13: Manuel de l’ Chassis 9.1 Front br
Page 17 and 18: Manuel de l’ Chassis 12 Fork : 12
Page 19 and 20: Manuel de l’ Chassis 12.4 Oil cha
Page 21 and 22: Manuel de l’ Chassis 14 Shock abs
Page 23 and 24: Manuel de l’ Chassis 16 Side stan
Page 25: Manuel de l’ Chassis 17.1 Engine

SY250F Chassis - Scorpa

Create successful ePaper yourself

Delete template?

Save as template?