ZONING BYLAW 2008 THE CORPORATION OF THE ... - Burns Lake

(b) despite the general regulations, other than the required yard
setbacks, a minimum of 10% must be amenity area in bare
land strata developments.
.14 Specific Use Regulations: in accordance with Section 4.0 of this
Bylaw.
7.4 Residential Mobile Home Park Zone (R4)
.1 Purpose:
The purpose of this zone is to provide areas for mobile home parks.
.2 Principal Permitted Use:
(a) manufactured or mobile home.
.3 Accessory Permitted Uses:
(a) accessory buildings and structures;
(b) amenity area;
(c) home occupation, excluding bed and breakfast;
(d) retail store, convenience; and
(e) recreational vehicle storage.
Regulations
.4 Minimum Mobile Home Site/Park Lot or Parcel Area:
(a) mobile home site – 370 m 2 ; and
(b) mobile home park development lot or parcel – 2 ha.
.5 Minimum Mobile Home Site/Park Lot or Parcel Width:
(a) mobile home site – 12 m;
(b) cul-de-sac sites – 6 m; and
(c) mobile home park lot or parcel – 40 m.
.6 Minimum Setbacks to Lot Lines and Other Mobile Homes:
(a) to another mobile home – 6 m;
(b) to an internal access road – 6 m;
(c) to a rear or side site line – 1.5 m; and
(d) to an exterior property line – 4.5 m.
.7 Maximum Height: 7.6 m.
.8 Maximum Density:
(a) 20 units per hectare; and
(b) one mobile home per mobile home site.
.9 Minimum Floor Area: Principal dwelling - 70 m 2 .
.10 Maximum Site Coverage: 55% all buildings and structures on an
individual mobile home site.
Village of Burns Lake Zoning Bylaw No. 880, 2008
38