Studer D21m I/O System Components - ATT Audio Controls
Studer D21m I/O System Components - ATT Audio Controls
Studer D21m I/O System Components - ATT Audio Controls
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SDI I/O 1.949.442The HD/SD SDI embedder/de-embedder card is able tohandle video signals according to the SD as well as theHD standard. It can act as an eight-channel embedder,an eight-channel de-embedder, or as a combination ofthe two. Therefore, for the <strong>D21m</strong> I/O system it may actas an eight-channel audio input card, an eight-channelaudio output card, or an eight-channel input and outputcard. These three modes are determined by hardwareswitches located on the card.The SDI standard defines up to 16 audio channelstransmitted within a video signal. These 16 channelsare divided into four groups of four channels each. Theuser can select which two groups are to be embedded orde-embedded by hardware switches on the card: eithergroups 1&2, or groups 3&4. It is also possible to clearthe SDI data structure possibly present in the incomingvideo signal and to allocate the groups from scratch.The <strong>D21m</strong> SDI card hosts sampling rate convertersboth for audio inputs (de-embedding) as well as theaudio outputs (embedding). So the mixing console canrun independent of the video sync used for SDI. Bothsampling rate converters can be bypassed individually.When bypassed, the SDI card is fully compatible totransmitting Dolby E audio format.Modes8-ch console output (embedder),8-ch console input (de-embedder), or8-ch console input and 8-ch console output (de-embedder/embedder)Selectable SDI groups 1&2, or 3&4Video connectors INPUT, OUTPUT, THROUGH (BNC, 75 Ω)15