Overview Quality Assurance at LANL - Acquisition Services ...

IBC Inspection & LANL Requirement (continued)5) Test and Inspection Plan must be completed by the Engineer of Record perIBC 1705.6) Engineer of Record must perform Structural Observations in accordance withIBC 1710.7) Calibrated M & TE testing equipment must be used for inspection andacceptance of work. As found condition of the M & TE equipment must besubmitted to the project for review upon completion of work. Any rework orrepairs as a result of out of calibrated equipment is the subcontractorsresponsibility. This equipment must be handled with care.8) Pressure Tests- properly sized and calibrated safety relief valves and gagesmust be used.9) Work must be performed in accordance with approved design per AP-341-519,R1. RFIs can not be used as design documents.U N C L A S S I F I E DSlide 33Operated by Los Alamos National Security, LLC for the U.S. Department of Energy’s NNSA