RTS 85 DORMA - Hardware Direct

Transom concealeddoor closerDORMARTS 85

DORMA RTS 85AccessoriesAccessories for double action and centre pivoted single action doors (70 mm pivot point)Side-load installationSide-load installation isachieved by offering the doorin the closed position, ontothe floor pivot. The closerarm, fitted in the upper doorrail, is connected to thespindle and secured with aclamping piece.Floor pivot set, total height57 mmArt.-No. 8551for bottom rails with channeldepth of 18–50 mm.(Floor portion may beshortened to suit bottom rail.)Floor portion of pivot isfitted directly to floor.11 Closer arm with armchannelArt.-No. 8530for top rails with min.15 mm channel depth and38 mm width.2 Floor pivot set, totalheight 27 mmArt.-No. 8550for bottom rails with channeldepth of 18–20 mm. Floorportion of pivot is fitteddirectly to floor.3 Threshold pivot setArt.-No. 8554for bottom rails with channeldepth of 25 mm.Floor clearance: 5 mm.Floor portion is fitteddirectly to threshold.(Upper portion same as 2).Threshold pivot setArt.-No. 8556for bottom rails with channeldepth of 40 mm.Floor clearance: 5 mm.Floor portion is fitteddirectly to threshold.(Upper portion same as 2).23End-load installationEnd-load installation isachieved by offering the door,in the open position, ontothe floor pivot and spindlesimultaneously. The floorpivot locks automatically,connection to spindle issecured with a clampingpiece.1 Closer arm with armchannelArt.-No. 8534for top rails with min.21 mm channel depth and35 mm width.2 Floor pivot set, totalheight 27 mmArt.-No. 8552for bottom rails with channeldepth of 18–20 mm. Floorportion of pivot is fitteddirectly to floor.3 Threshold pivot setArt.-No. 8555for bottom rails with channeldepth of 25 mm.Floor clearance: 5 mm.Floor portion is fitteddirectly to threshold.(Upper portion same as 2).123RTS 85, GB3

Accessories for butt hung or offset pivoted single action doorsSingle action doors hung onbutt hinges or offset pivotscan be connected to thecloser with slide arm andchannel assemblies. Pleasenote that this applicationmay reduce the maximumopening angle availableon the door. Similarly, if ahold-open model has beenselected, the hold-openpoint will be altered: eginstead of 105°, the positionwill lie between 90° and100°, depending on doorthickness.Note:Maximum door opening withslide arm and channelassemblies –105°.Consult our TechnicalService Department givingspecific details for slide armand channel assemblies.Drawings of door and framedetails must be submittedtogether with the pivotcentre of the hinge.1 Slide arm and channelArt.-No. 85102 Weld-on extensionArt.-No. 8521For steel doors, 40 mm long(can be shortened),38 mm dia.12Accessories for tempered glass doors (65 mm pivot point)For tempered glass doors,the RTS 85 is used with aspecial fixing bracket,Art.-No. 8520 G, giving a65 mm pivot point. Thestandard patch fittingscan thus be used withappropriate inserts.(Patch fittings with insertavailable from DORMA-Glasrange of products).1 Fixing bracketArt.-No. 8520 GFor fixing the DORMA RTSin the transom.2 Floor pivot bearing withflat-tapered spindleArt.-No. 8560 GWith sealed roller bearingassembly, rust-protected, formax. door weights of 110 kg.The floor pivot bearingcombined with appropriatebottom straps from theaccessories range forDORMA BTS floor springs isalso suitable for aluminium,steel and timber doors.12RTS 85, GB4

Typical applicationsDouble action aluminium doorSingle action timber doorDouble action tempered glass doorwith aluminium frameSingle action double rebatedaluminium doorSingle action timber doorin a steel frameDetailed installation drawings on a scale of 1:1will be provided on request.RTS 85, GB5

DORMA RTS 85Transom concealeddoor closerDORMA RTS 85 for double and single action doorsDoor closer Standard Standard Standard with spindle with spindle with spindle with spindle with spindleRTS 85 model model with model with insert 5 mm insert 5 mm insert 5 mm insert 10 mm insert 10 mmhold-open hold-open extended extended and extended and extended extended andat 105° at 90° at 90°EN 3 85311101 85313101 85312101 85311102 85311103 85312103EN 4 85321101 85323101 85322101 85321102 85323102 85322102 85321103 85322103EN 5 85331101 85333101 85332101 85331102 85331103 85332103Accessories closer arm Floor pivot set, Floor pivot set, Threshold Closer arm weld-onwith height height pivot set with channel extensionsbracket 27 mm 57 mm 1HH for singleaction doorsSide-loadinstallation 85210005 65310300 65410300 65510400 85210001 85110001End-loadinstallation 85210009 65320300DORMA RTS 85 for tempered glass doorsDoor closer Standard Standard with spindleRTS 85 G model model with insert 5 mmhold-open extended90°EN 3 85311301 85312301 85311302EN 4 85321301 85322301 85321302Accessories Floor pivot Floor pivot Floor pivot Floor pivot Floor pivotset set 5 mm set 10 mm set 15 mm set stainlessextended extended extended steelzu RTS 85 G 65540000 85210025 85210026 85210027 85540059Specification textTransom concealed doorcloser with built-in cushionbackcheck, adjustableclosing speed and sweeprange.SizeY EN 3 Y EN 4 Y EN 5ModelY For both single anddouble action doors(pivot point 70 mm)Y For tempered glass doors(pivot point 65 mm)Y Non hold-openY Hold-open at 105°Y Hold-open at 90°Y With spindle insert 5 mmextendedY With spindle insert10 mm extendedY Closer armArt.-No.Y Floor pivot setArt.-No.Make: DORMA RTS 85Division Door Control worldwidewww.dorma.comCentral EuropeDORMA GmbH + Co. KGBreckerfelder Str. 42–48D-58256 EnnepetalTel. +49 2333 793-0Fax +49 2333 793-495AustralasiaDORMA Door Controls Pty. Ltd.46-52, Abbott RoadHallam/Victoria 3803AustraliaTel. +61 3979 63555Fax +61 3979 63955China/Hong KongDORMA Door Controls(Suzhou) Co. Ltd.No. 9, Hong Feng RoadSuzhou Singapore Industrial ParkSuzhou, 215021P.R. of ChinaTel. +86 512 67612481Fax +86 512 67614582DORMA Door Controls Pte. Ltd.Room 701, Technology Plaza651 King’s RoadNorth PointHong KongTel. +852 25034632Fax +852 28875370Emerging MarketsDORMA GmbH + Co. KGBreckerfelder Str. 42–48D-58256 EnnepetalTel. +49 2333 793-0Fax +49 2333 793-495DORMA Door Controls (Pty.) Ltd.Kings Court4A Mineral CrescentZA-2000 Crown/GautengSouth AfricaTel. +27 11 8300280Fax +27 11 8300291Far EastDORMA Far East Pte. Ltd.No. 31 Gul LaneSingapore 629425Tel. +65 6268 7633Fax +65 6265 7995FranceDORMA France S.A.S.Europarc42, rue Eugène DupuisF-94046 CréteilTel. +33 1 41942400Fax +33 1 41942401GulfDORMA Gulf Door Controls FZEJebel Ali Free Zone SouthPlot No. S 20135Road No. SW 301 GP.O. Box 17268Dubai – United Arab EmiratesTel. +971 4 8020400Fax +971 4 8869100 / 8869101North AmericaDORMA Architectural HardwareDORMA Drive, Drawer ACReamstown, PA 17567-0411Tel. +1 800 5238483Fax +1 800 2749724ScanbaltDORMA Sverige ABF O Petersons Gata 24SE-421 31 Västra FrölundaTel. +46 31 289520Fax +46 31 281739South AmericaDORMA Sistemas de Controlespara Portas Ltda.Av. Piracema, 1400Centro Empresarial TamboreCEP 06400-933 Barueri/São Paulo, BrasilTel. +55 11 46899280Fax +55 11 46899215South-East EuropeDORMA AUSTRIA GmbHPebering Strass 22A-5301 EugendorfTel. +43 6225 284880Fax +43 6225 28491South EuropeDORMA Italiana S.r.l.Via. Canova 44/46I-20035 Lissone (MI)Tel. +39 039 244031Fax +39 039 24403310DORMA Ibérica, S.A.Camino San Martin de la Vega, 4E-28500 Arganda del Rey(Madrid)Tel. +34 91 8757850Fax +34 91 8757881UK/IrelandDORMA UK Ltd.Wilbury WayHitchinGB-Hertfordshire SG4 0ABGreat BritainTel. +44 1462 477600Fax +44 1462 4776014 021226 296110WN 050 927 51532, 06/08, RTS 85, GB, x. XX. xx/08 Subject to change without notice