Lockwood 9000 Panic Bar

9000 Series Panic Exit DeviceLockwood 9000/9100 SeriesRim Type Panic Exit DeviceA range of surface mounted rim type exitdevices suitable for 900 or 1200 mm widthdoors. Features include deadlatching, firerated and cylinder key hold-back(dogging). Suitable for single and doubledoor applications.If safety and securityare your concerns,the solution is push control.Public buildings like mostindustrial and commercialpremises are required to meetthe conflicting need for bothsafety and security.Regulations relating to escape frombuildings and general safety havemade it desirable that doors at exits inpublic buildings, places of publicentertainment, shops, etc, be fittedwith panic exit devices.The main purpose of apanic exit device is to givesafe and effective escapethrough a doorway with minimumeffort and without prior knowledge ofthe device.Lockwood’s range of Panic ExitDevices reliably secure egress doorsin accordance with all applicable fireand safety code requirements.Where the ultimate in push control isrequired Lockwood Panic Exit Devicesare designed to meet all your safetyand security needs.Lockwood 9300/9400 SeriesVertical Type Panic Exit DeviceA range of surface mounted vertical typeexit devices suitable for 900 or 1200 mmwidth doors. Features include two pointsecurity locking with deadlatching, firerated and cylinder key hold-back(dogging). Suitable for single and doubledoor applications.Lockwood 9500/9600 SeriesRim Type Mortice Lock PanicExit DeviceA range of mortice lock type exit devicesfor 900 or 1200 mm width doors.Features include additional security ofLockwood 3572 Series Mortice Lock andkeying, fire rated, compatibility withLockwood Brass Door Furniture range ofknobs and levers. Suitable for single anddouble door applications.2Lockwood Security Products

9000 Series Panic Exit DeviceContentsDescriptionPagePanic Exit Device Specifications 49000/9100 Series Rim Type Panic Exit Device 69300/9400 Series Vertical Type Panic Exit Device 79500/9600 Series Rim Type Panic Exit Device with Mortice Lock 8Brass Door Furniture Plates to Suit 9500/9600 Series 9Latching & Accessories 10Link Products 11Lockwood Security Products3

9000 Series Panic Exit DevicePanic Exit Device SpecificationsLockwood’s 9000 Series Panic Devices aredesigned to provide a ready means ofescape at all times and still maintain highlevels of security.Designed to comply with world classstandards for both safety and fire.Safety & SecurityThe main purpose of a panic exit device isto give safe and effective escape through adoorway with minimum effort and withoutprior knowledge of the device.In a panic situation, a group of people willreact differently from an individual. Whentwo or more people are running to anescape door, probably in darkness and/orsmoke, it is possible that the first one toreach the door will not necessarily operatethe panic device, but can push the surfaceof the door while other people will be tryingto operate the panic bar by hand or bodypressure.The Lockwood 9000 Series Panic ExitDevices will enable a door to be opened atall times by hand or body pressure alongthe inside face of the panic device and notrequire the use of a key or any other object.All Lockwood 9000 Series Panic ExitDevices are designed for ease of openingby the young, elderly and handicapped.StandardThe Lockwood 9000 Series Panic ExitDevices meet or surpass the followingAustralian and worldwide standards.EN1125:1997These products have been successfullytested on fire door assemblies inaccordance with Australian StandardAS 1905.1: 1997 Fire Resistant Doorsets.This product has been successfully testedin accordance with AS 2331.3.1: 1980Neutral Salt Spray Test (NSS TEST).This product has been successfully testedin accordance with Level D3 (Durability)Australian Lock Standard(AS 4145.2: 1993).This product has been successfully testedin accordance with Level S2 (PhysicalSecurity) Australian Lock Standard(AS 4145.2: 1993).PerformanceMeets European Standard EN1125:1997Normal SituationsLow opening pressure is ideal for children, older people and the handicapped.Under these conditions a light push of 8 kg (maximum) will operate the push bar.Panic SituationsDevice operates in panic situations even if door is subject to loads of 100 kg.Under these conditions a maximum of 22 kg will operate the push bar.4Lockwood Security Products

9000 Series Panic Exit DevicePanic Exit Device Specifications (continued)DescriptionLockwood 9000 Series Panic Exit Devicesare available in a range of functions.Mechanism design ensures easyinstallation, clean styling and ease ofoperation. Suitable for single or doubledoors.ApplicationsIt is important that the width of the passageof the door is not unduly reduced by theprojection of the operating bar. This is whythe standards set the projection at 100 mm(EN1125:1997). Lockwood has reduced thisprojection to 60 mm with its push bar9000 Series, allowing for a panic bar in anarrow passage without modification of thedoor or the number of units of passage.Suitable for single or double doors, timber,metal, narrow profile, glass security and firedoors.Features & SpecificationsDeadlatching on all bolts.Safety clutch outside lever trim plateprotects the unit from damage that couldrender the device inoperable.Adjustable on site.Automatic top and bottom latchesmaintaining the bolt drawn in when the dooris open (vertical version).Surface mounted for ease of installation.Pick resistant bottom latch.HandingAll functions are reversible and non handedexcept 9500/9600 Series mortice lockversions.MaterialsThe body is manufactured of steel.Internal mechanisms made of steelor brass.Main cover made of decoratedelectroplated steel pressing.Secondary cover made of decoratedZamak.Horizontal bar made of decorated steel.Lever plate operating mechanism is madefrom electroplated steel pressings with highdensity zinc alloy cover.LatchboltMade of double chrome plated steel.Auxiliary BoltMade of double chrome plated steel.Door ThicknessStandard 35 to 45 mm doors.Mortice lock version 32 to 48 mm doors.Specify door thickness when other thanstandard.Product WidthStandard maximum 838 mm to suit(900 mm) door.1141 to suit (1200 mm) door.Door HeightStandard maximum height 2300 mm(vertical rod version).For doors between 2300 to 3000 mmin height, order extension rod kitPart No. 9000/50SIL.Installed with centre line of exit device at1023 mm above finished floor level.DoorstileSuitable for both 90° and flush head doorstiles minimum head clearance requirementof 30 mm.Outside TrimsKey entry, key entry with pull plate andkey/lever entry with mechanism safetyoverride (refer details page 10).Hold-back (dogging).Euro cylinder key hold-back available onall types.Hold-back is not an approved function onfire doors.Standard FinishesBody – Sliver, Powdercoat.Touchbar – Black, Powdercoat.KeyingAll Lockwood 9000 Series Panic ExitDevices can be used in conjunction withLockwood Master Keying Systems,standard C4 Keyed Alike or Keyed to Differ.Because of the complexity of keyingrequirements cylinders will need to beordered separately.Special KeyingCan be keyed alike, master keyed,grand master keyed, maison keyed orconstruction keyed in Lockwood securitykeying systems.Specification ServiceFor hardware specification assistance, referto your local Lockwood Sales Office orAuthorised Agent.A comprehensive obligation free doorhardware specification can be prepared byour hardware representatives.Typical Door InstallationsSingle Door withRim Device9000EOSIL9100EOSILSingle Door withVertical Device9300EOSIL9400EOSILPair of non-rebated Doorswith 2 Vertical Devices9300EOSIL9400EOSIL9300EOSIL9400EOSILPair of Rebated Doors1 Vertical Device and1 Rim device9300EOSIL9400EOSIL9000EOSIL9100EOSILPair of Rebated Doors1 Vertical Device, MorticeLock and Rebate Strike9300EOSIL9400EOSIL9500MLSIL9600MLSILLockwood Security Products5

9000 Series Panic Exit Device9000/9100 Series Rim Type Panic Exit DeviceThe Lockwood 9000/9100 Rim Type PanicExit Device is designed to provide a readymeans of escape at all times by the singleaction of pushing on a horizontal bar fittedacross the full width of a door.Features & SpecificationsSuitable for single and double doorapplications of 900 or 1200 mm widthdoors.Slim, neat design, surface mounted, deadlatching, cylinder key hold-back (dogging),wide selection of furniture, non-handed.Lockwood 9000 Series Panic Exit Deviceshave been successfully tested on fire doorassemblies in accordance withAS 1905.1: 1997 Fire Resistant Doorsets.The basic 9000 series horizontal panic exitdevice is suitable for timber, metal andsecurity glass doors with mid rail.Standard FinishesSilver Polyester Powdercoat with Blacktouch barSILPack includes double door strikeHorizontal Push BarOptional 201-252SC Cylinder for Key Entry (order separately).Part No. 9000EOSIL Single point locking to suit 900 mm door.Part No. 9100EOSILPart No. 9000CDEOSIL*Horizontal Push Bar Key Entry with Pull PlateCylinder 201-252SC (order separately).Part No. 9000NLSIL Single point locking to suit 900 mm door.Part No. 9100NLSILSingle point locking to suit 1200 mm door.Single point locking with key hold-back (dogging) to suit 900 mm door.Part No. 9100CDEOSIL* Single point locking with key hold-back (dogging) to suit 1200 mm door.* Order hold-back cylinder separately.Single point locking to suit 1200 mm door.Part No. 9000CDNLSIL* Single point locking with key hold-back (dogging) to suit 900 mm door.Part No. 9100CDNLSIL* Single point locking with key hold-back (dogging) to suit 1200 mm door.* Order hold-back cylinder separately.Horizontal Push Bar Key Entry with Lever PlateCylinder 8219-302SC Locks or unlocks lever (order separately).Part No. 9000LASIL Single point locking to suit 900 mm door.Part No. 9100LASILCylinder Hold-back (Dogging)Single point locking to suit 1200 mm door.Part No. 9000CDLASIL* Single point locking with key hold-back (dogging) to suit 900 mm door.Part No. 9100CDLASIL* Single point locking with key hold-back (dogging) to suit 1200 mm door.* Order hold-back cylinder separately.Cylinder 9555-502CP (order separately).Can be keyed alike, master keyed, grand master keyed, or construction keyed inLockwood high security keying systems.Note: Hold-back is not an approved function on fire doors.6Lockwood Security Products

9000 Series Panic Exit Device9300/9400 Series Vertical Type Panic Exit DeviceThe Lockwood 9300/9400 Vertical TypePanic Exit Device is designed to provide aready means of escape at all times by thesingle action of pushing on a horizontal barfitted across the full width of a door.Features & SpecificationsSuitable for single and double doorapplications of 900 or 1200 mm widedoors, 2300 mm standard up to 3000 mmin height.Slim, neat design, surface mounted, deadlatching, automatic top and bottom latchesmaintaining the bolt drawn in when the dooris open, pick resistant bottom latch, cylinderkey hold-back (dogging), wide selection offurniture, non-handed.Lockwood 9000 Series Panic Exit Deviceshave been successfully tested on fire doorassemblies in accordance with AS 1905.1:1997 Fire Resistant Doorsets.The basic 9000 Series Horizontal Panic ExitDevice is suitable for timber, metal andsecurity glass doors with mid rail.Standard FinishesSilver Polyester Powdercoat with Blacktouch barSILPack includes standard and flushhead top strike.Vertical Push BarPart No. 9300EOSILPart No. 9400EOSILTwo point vertical locking to suit 900 mm door.Two point vertical locking to suit 1200 mm door.Part No. 9300CDEOSIL* Two point vertical locking with key hold-back (dogging) to suit 900 mm door.Part No. 9400CDEOSIL* Two point vertical locking with key hold-back (dogging) to suit 1200 mm door.* Order hold-back cylinder separately.Vertical Push Bar Key Entry with Lever PlateCylinder 8219-302SC Cylinder for Key Entry.Lock or unlock lever (order separately).Part No. 9300LASIL Two point vertical locking to suit 900 mm door.Part No. 9400LASILTwo point vertical locking to suit 1200 mm door.Part No. 9300CDLASIL* Two point vertical locking with key hold-back (dogging) to suit 900 mm door.Part No. 9400CDLASIL* Two point vertical locking with key hold-back (dogging) to suit 1200 mm door.* Order hold-back cylinder separately.Cylinder Hold-back (Dogging)Cylinder 9555-502CP (order separately).Can be keyed alike, master keyed, grand master keyed, or construction keyed inLockwood high security keying systems.Note: Hold-back is not an approved function on fire doors.Lockwood Security Products7

9000 Series Panic Exit Device9500/9600 Series Rim Type Panic Exit Device with Mortice LockThe Lockwood 9500/9600 Rim Type PanicExit Device is specifically designed to beused in conjunction with the Lockwood3572 High Security Cylinder Mortice Lockand Lockwood 1800/2800 Series BrassDoor Furniture.An additional benefit of this will enable thedesigner/specifier the convenience to usethe same Lockwood brass lever/knobdesigns that have been selected forthe project.OperationInside “exit by” rim device operates morticelock.Outside “entry by” lever/knob operatesmortice lock.Locking, see cylinders functions below.Lockwood 9000 Series Panic Exit Deviceshave been successfully tested on firedoor assemblies in accordance withAS 1905.1: 1997 Fire Resistant Doorsets.Standard FinishesPanic Device – Silver Polyester Powdercoatwith Black touch barSILChrome PlateCPFlorentine BronzeFBPolished BrassPBSatin ChromeSCBlack Chrome PlateBCPTo choose suitable Lockwood Brass DoorFurniture, select from the range on page 9.KeyingStandard KeyingAll Lockwood 9500/9600 Series Panic ExitDevices can be used in conjunction withLockwood Master Keying Systems,standard C4 Keyed Alike or Keyed to Differ.Because of the complexity of keyingrequirements cylinders will need to beordered separately.Special KeyingCan be keyed alike, master keyed, grandmaster keyed, or construction keyed inLockwood high security keying systems.Note: This product is handed to suit left orright hand doors.Brass FurnitureHorizontal Rim Type Panic Exit Device with Mortice LockThese functions include a panic bar, mortice lock, all mounting brackets andscrews. Cylinders, exterior brass furniture not included (order separately).Part No. 9500MLLSIL Left hand single point locking to suit 900 mm doorPart No. 9500MLRSILPart No. 9600MLLSILCylindersThe following mortice lock oval shaped brass cylinder functions are available.Part No. 570-2Outside cylinder “X” key entry retract boltPart No. 572-2Part No. 9000-2402(RH)Handing9500/9600 Series mortice lock versions arehanded to suit left or right handed doors.Outside cylinder “Z” locks/unlocks outside handleHold-back cylinderPart No. 9000-2452(LH) Hold-back cylinderSpecify finish after part number.Right hand single point locking to suit 900 mm doorLeft hand single point locking to suit 1200 mm doorPart No. 9600MLRSIL Right hand single point locking to suit 1200 mm doorSuitable for both single and double door installations of 900 or 1200 mm width. When fitting to double doorsfit to active leaf and fit either 9300/9400 Series vertical rod exit device to inactive leaf. For double doors theLockwood double door strike, 3570-2902 (fire rated) or 3570-4902 (non fire rated) needs to be fitted.8Lockwood Security Products

9000 Series Panic Exit DeviceBrass Door Furniture Plates to Suit 9500/9600 SeriesLockwood door furniture is strong andreliable with that quality feel and smoothaction characteristic of the world’s finestdoor furniture, ensuring trouble free service.Lockwood door furniture is available in awide range of stylish knob, lever and platedesigns suitable for architectural, industrial,commercial and residential applications.Lockwood furniture is made from thehighest quality materials and is available ina choice of superb finishes that providecomplete freedom of choice.Door ThicknessFixing screws to suit door thicknessesbetween 32 and 48 mm. For thicker doorslonger screws and spindles must beordered.HandingPlates are not handed; lever may bereversed by removing stop screw, exceptthose denoted by *.Standard FinishesChrome PlateFlorentine BronzePolished BrassSatin ChromeBlack Chrome PlateCPFBPBSCBCPOrdering Procedure1801 53 L CPSpecify outsideplate no.Specify lever or knobno. if applicable.Specify handing ofdoor. If applicable.Specify FinishPlates and Functions18002800 1801 2801 1805 2805 1807 2807 1808 2808Plate DimensionsKey entryCYL. 570-2X CamKey retracts boltKey entry/leverCYL. 572-2Z CamKey locks/unlocksoutside handleLever entry Plain plate Key entry/FixedLeverCYL 570-2X CamKey retracts boltFor handle/knob limitingdimensions refer to LockwoodBrass Door Furniture catalogue.Levers and Knobs to Suit0020 32 40 41* 42* 434445 48*4950* 51* 52* 53* 54*56* 57596061* 69 707180 83 879097* Denotes handed leversLockwood Security Products9

9000 Series Panic Exit DeviceLatching & AccessoriesLatching Detail Single & Double Door Versions444423DoorJamb5Single door rim type9000/90SIL Strike44 44Double door two verticalDouble door rebated vertical and rim type9000/94SIL Strike5Latching Detail for Vertical Rod Versions9000/96SIL 9000/93SIL 9000/92SIL10Outside Lever Trim Plates9000/10SIL Lever PlateSafety clutch in outside lever trim plateprotects the unit from damage that couldotherwise render the device inoperable.9000/15SILCylinder Pull Plate9000/20SILPlain Pull PlateAccessories/Spare Parts ListingPart No. 9000/10SIL Outside lever trim platePart No. 9000/15SIL Outside pull plate (cylinder)Part No. 9000/20SIL Outside pull plate (no cylinder)Part No. 3572/9000SC Lockwood 3572 mortice lock kitPart No. 9000/30BLK Mortice lock mounting plate (large)Part No. 9000/35BLK Mortice lock mounting plate (small)Part No. 9000/96SILPart No. 9000/50SILPart No. 9000/60SILPart No. 9000/65SILPart No. 9000/70SILPart No. 9000/75SILPart No. 9000/80Top strike (flush head mounting)Set extension cover and rod tosuit 2.3 to 3 m doors4 hour fire rated sex boltsEnd cap assemblyFront cover (rim device)Front cover (vertical device)Interior finger pull (PWD)Part No. 9000/90SILPart No. 9000/92SILPart No. 9000/93SILPart No. 9000/94SILSingle door strikeBottom strikeTop strike (standard mounting)Double door strikePart No. 201-252SCPart No. 8219-202SCPart No. 9555-502CPKey entry cylinderLever plate cylinderHold-back (dogging) cylinder10Lockwood Security Products

9000 Series Panic Exit DeviceLink ProductsDoor ClosersQuite often doors fitted with Panic ExitDevices require a closing device.Lockwood offer a wide range of highquality door closers, hydraulic floor springsand transom closers for such applications.(Refer to individual Lockwood price lists.)Lockwood 414/426 SeriesPower Adjustable Door CloserLockwood Arrow 714/726 SeriesPower Adjustable Door CloserCoordinating DevicesWhen fitting door closers to a pair ofrebated doors it is important that the doorsclose in their correct sequence.The Lockwood 3000 is designed to ensurethis happens.Dimensions of body: length 75 mm, width32 mm, depth 19 mm.Standard FinishesClear AnodisedCANLockwood coordinating devices have beensuccessfully tested on fire door assembliesin accordance with Australian Standard AS1905 1997 Part 1, Fire Resistant Doorsets.Ordering ProceduresPart No. A4000 X 305CANPart No. A3000 X 180CANPart No. A3000 X 230CANFor doors fitted with Lockwood Panic Exit Devices (up to 2400 mm wide).Pair of doors up to 1800 mm wide.Pair of doors up to 2400 mm wide, when fitted with door closers.Door StopsIt is recommended that a door stop be installed to ensure that the door has a positive backstop at thedegree of opening selected. It is essential to use a door stop where design factors of the buildingnecessitate opening out of external doors and no windbreak is provided.Position the door stop near the periphery of the door arc to prevent racking and twisting of the door whichmay result in damage to the door, frame or hydraulic unit.Floor Mounted Door Stop A250SC, CP, PB, BRNWall Mounted Door Stop A350SC, CP, PB, BRNLockwood Security Products11

Visit us at: www.lockwoodsecurity.com.auSales Offices & Authorised AgentsVictoria – Head Office50 Edward StreetOakleigh Vic. 3166Telephone (03) 8574 3888Facsimile (03) 8574 3788Queensland South450 Sherwood RoadSherwood Qld 4075Telephone (07) 3373 5200Facsimile (07) 3373 5256Queensland NorthRalph Buck Agencies15 Mackley StreetGarbutt Qld 4814Telephone (07) 4779 0177Facsimile (07) 4775 1480New South WalesUnit 7, 192 Kingsgrove RoadKingsgrove NSW 2208Telephone (02) 9554 4011Facsimile (02) 9554 3772South Australia182 Magill RoadNorwood SA 5067Telephone (08) 8364 1930Facsimile (08) 8364 1931Manufacturing PlantsVictoria50 Edward StreetOakleigh Vic. 3166Telephone (03) 8574 3888Facsimile (03) 8574 3788Queensland450 Sherwood RoadSherwood Qld 4075Telephone (07) 3373 5200Facsimile (07) 3373 5256Western Australia45 Gladstone StreetEast Perth WA 6004Telephone (08) 9227 9588Facsimile (08) 9227 8913Tasmania23 Antill StreetSouth Hobart Tas. 7000Telephone (03) 6223 5404Facsimile (03) 6224 0435Northern TerritoryTaylor EnterprisesLot 1360 Makagon RoadBerrimah NT 0828Telephone (08) 8984 3653Facsimile (08) 8947 0082New Zealand9B Mahunga DriveMangere BridgeAuckland New ZealandTelephone (09) 634 5590Facsimile (09) 634 5589Export Department50 Edward StreetOakleigh Vic. 3166Telephone +61 (0)3 8574 3888Facsimile +61 (0)3 8574 3700Asian OfficesASSA ABLOY – MalaysiaASSA ABLOY – SingaporeASSA ABLOY – ThailandASSA ABLOY – Hong KongASSA ABLOY – ShanghaiASSA ABLOY – BeijingContact the Export Department, Australiafor details.Worldwide DistributorsContact the Export Department, Australiafor details.Lockwood GuaranteeLockwood Security Products Pty Limited (“Lockwood”) guarantees its products againstdefects in workmanship and materials. If within the normal working life of a product it is foundto be defective, Lockwood will supply the same or an equivalent product free of charge.All electrical components used in our products are guaranteed for a period of five years fromthe date of manufacture. Lockwood however, assumes no liability under this guarantee forthe following:1. Improper installation or failure to follow fitting instructions.2. Failure due to improper maintenance or fair wear and tear.3. Indirect or consequential loss or damage.4. Cost of removal and/or replacement.5. Cost of freight and/or travelling time.6. The plated finishes, Florentine Bronze, Architectural Bronze, Polished Brass, Goldand Satin Brass are classified as soft finishes. As deterioration is possible under someclimatic conditions, these finishes are excluded from this guarantee.7. Any modification to a product as supplied, or repairs, unless authorised by Lockwood.8. Use of replacement parts other than authorised parts.9. Malfunction or failure of the product due to the use of non-genuine Lockwood parts.Nothing in the Lockwood guarantee excludes, restricts or modifies any condition, warranty,right or liability implied or protected by law where to do so would render the Guarantee, orany part of it, void.Lockwood Security Products Pty Limited ABN 90 086 451 907An ASSA ABLOY Group companyPRODUCED BY FRONTLINE DESIGN CONSULTANTSCOM-CAT-017