Specalog for D7G Series 2 Track-Type Tractor, AEHQ5716

EngineEngine ModelCat ® 3306 DITAFlywheel Power 150 kW 202 hpMaximum Flywheel Power 164 kW 220 hpNet Power – Caterpillar 150 kW 202 hpNet Power – ISO 9249 150 kW 202 hpNet Power – SAE J1349 150 kW 202 hpNet Power – EU 80/1269 150 kW 202 hpBore 121 mm 4.75 inStroke 152 mm 6 inDisplacement 10.5 L 638 in 3• Engine ratings at 2,000 rpm• Net flywheel power is the power available at the flywheelwhen the engine is equipped with fan, air cleaner, waterpump and alternator.• No altitude deration is required below 4100 m (13,450 ft).Transmission1.0 Forward 3.9 km/h 2.3 mph2.0 Forward 6.4 km/h 4 mph3.0 Forward 9.9 km/h 6.2 mph1.0 Reverse 4.5 km/h 2.8 mph2.0 Reverse 7.8 km/h 4.9 mph3.0 Reverse 12.7 km/h 7.9 mphService Refill CapacitiesFuel Tank 415 L 110 galCooling System 45.4 L 11.2 galEngine Crankcase 27 L 7.3 galFinal Drives (each) 34 L 9 galHydraulic Tank 102 L 27 galTransmission, bevel gear and 70 L 18.5 galsteering clutch compartments,torque converterWeightsOperating Weight 20 580 kg 45,381 lbShipping Weight 15 650 kg 34,510 lb• Operating weight includes: lubricants, coolant, 2-valvehydraulics, 560 mm (22 in) shoes, 7S bulldozer blade,Non-ROPS cab, air conditioning, full fuel tank and 80 kg(176 lb) operator.• Shipping weight includes: lubricants, coolant, 1 valvehydraulics, 560 mm (22 in) shoes and 5% fuel.UndercarriageShoe TypeModerate Service(Single Grouser)Width of Shoe 560 mm 22 inWidth of Shoe – Optional 510 mm 20 inShoes/Side 38Grouser Height 70 mm 2.7 inTrack on Ground 2720 mm 107 inGround Contact Area 3.05 m 2 4,708 in 2BladesSU-Blade Capacity 5.75 m 3 7.53 yd 3S-Blade Capacity 4.2 m 3 5.5 yd 3A-Blade Capacity 2.9 m 3 3.8 yd 3RipperTypeFixed ParallelogramNumber of Pockets 3Overall Beam Width 2210 mm 87 inMaximum Clearance Raised 490 mm 19 in(under tip, pinned in bottom hole)Maximum Penetration 510 mm 20 inD7G Series 2 Track-Type Tractor specifications11