MiniMagster 1502, 1502s - Lincoln Electric - documentations

More documents

Recommendations

Info

Do not dispose of electrical equipment together with normalwaste!In observance of European Directive 2002/96/EC on Waste<strong>Electric</strong>al and Electronic Equipment (WEEE) and itsimplementation in accordance with national law, electricalequipment that has reached the end of its life must be collectedseparately and returned to an environmentally compatiblerecycling facility. As the owner of the equipment, you should getinformation on approved collection systems from our localrepresentative.By applying this European Directive you will protect theenvironment and human health!Installation and Operator InstructionsRead this entire section before installation or operation of the machine.Location and EnvironmentThis machine will operate in harsh environments. However, it is important that simplepreventative measures are followed to assure long life and reliable operation. Do not place or operate this machine on a surface with an incline greater than 15°from horizontal. This machine must be located where there is free circulation of clean air withoutrestrictions for air movement to and from the air vents. Do not cover the machinewith paper, cloth or rags when switched on. Dirt and dust that can be drawn into the machine should be kept to a minimum. This machine has a protection rating of IP21. Keep it dry when possible and do notplace it on wet ground or in puddles. Locate the machine away from radio controlled machinery. Normal operation mayadversely affect the operation of nearby radio controlled machinery, which mayresult in injury or equipment damage. Read the section on ElectromagneticCompatibility in this manual. Do not operate in areas with an ambient temperature greater than 40°C.20
Installation of the Rear Wheel Kit.Before staring the machine operation, the rear wheel kit should be installed.You should do as follow: Unpack the machine. Pull out four bolts M5x12 and nuts M5 from the bag. Set the wheel kit as it is shown in the Figure above. Fasten bolts and nuts.21
Page 2 and 3: From Lincoln Electric Bester Sp. z
Page 4 and 5: Bezpieczestwo uytkowaniaOSTRZEENIEU
Page 6 and 7: SPAWANY MATERIAŁ MOE POPARZY: Proc
Page 11 and 12: Spawanie z dodatni polaryzacj (DC+)
Page 13 and 14: Elementy na płycie tylnej MiniMags
Page 15 and 16: Kompatybilno elektromagnetyczna (EM
Page 17 and 18: Przepisy w sprawie bezpieczestwa i
Page 19: ELECTRICALLY POWERED EQUIPMENT: Tur
Page 23 and 24: Switch off the power supply of the
Page 25 and 26: Welding with Positive Polarity (DC+
Page 27 and 28: Rear Panel of the MiniMagster 1502,
Page 29 and 30: Electromagnetic Compatibility (EMC)
Page 31 and 32: Wykaz czci zamiennych / Spare Parts
Page 33 and 34: Pos. Description IndexMiniMagster15
Page 35 and 36: Schemat ideowy / Electrical Diagram
Page 37 and 38: Notatki
Page 41: NIE DRUKOWA TEJ STRONYrev02:Pozycja

MiniMagster 1502, 1502s - Lincoln Electric - documentations

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?