Wheels, Tires & Brakes - Custom Bikes by Mike

Stock-Style Wire Wheels16" Wheel Assemblies featureour Premium ® Rims!Wheels, Tires & Brakes13See page 13.30 for replacement spokesDual Flange Wheel AssembliesChrome or polished stainless steel spokes are laced to chrome rims andhubs. The 16" wheel assemblies feature our European-manufacturedPremium ® chrome 16" rims. The hubs feature thicker spoke flanges, androtor flanges held to .001" runout with either 5/16" or 7/16" holes on bothsides. All hubs accept any stock sprocket/rotor or rotor/rotor combinationfor greater flexibility when building custom wheel combinations. Theyinclude all internal spacers, seals and washers, and bearing end play is setat the factory. Wheel assemblies will bolt-on to most models from 1973thru 1985.Note: Wheels fit the rear of most models from 1986 thru 1999 when installed with aCC #19722 spacer (OEM 40932-81) between the belt pulley or sprocket and the hub.Wheels with 7/16" Flange Holes18687 16" x 3.00" with stainless steel spokes . . . . . . . . . . . . . . . . . . . . . . .$379.9919687 16" x 3.00" with chrome spokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$342.9919879 16" x 4.00" with chrome spokes . . . . . . . . . . . . . . . . . . . . . . . . . . . .$362.99140246 16"x 4.00" with stainless steel spokes . . . . . . . . . . . . . . . . . . . . . . .$399.99Wheels with 5/16" Flange Holes19675 16" x 3.00" with stainless steel spokes . . . . . . . . . . . . . . . . . . . . . . .$379.9919799 16" x 3.00" with chrome spokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$342.9918694 19" x 2.50" with stainless steel spokes . . . . . . . . . . . . . . . . . . . . . . .$356.9919694 19" x 2.50" with chrome spokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$335.9918695 21" x 2.15" with stainless steel spokes . . . . . . . . . . . . . . . . . . . . . . .$379.9919798 21" x 2.15" with chrome spokes (replaces OEM 43664-80B) . . .$349.99Front Axle Spacer for FXWG ModelsReplacement right or left axle spacers for FXWG models. May also be usedwhen fitting other wheels (such as CC #’s 19687 or 19694) to late modelfront ends.Sold in packs of 5.19696 1980 thru 1983 left spacer (repl. OEM 41594-73) . . . . . . . . . . . . . .$10.9919697 1983 right spacer (repl. OEM 41607-83) . . . . . . . . . . . . . . . . . . . . . . . .$9.49Chrome Dual Flange Wheel HubsComplete chrome hub assemblies for the front or rear of mostHarley-Davidson ® models from 1973 thru 1999. 7/16" or 5/16" holes in bothflanges, all internal components and bearing preload set at the factory.19678 Front or rear hub with 7/16" holes in both flanges for modelsfrom 1973 thru 1985 (repl. OEM 43540-73A) . . . . . . . . . . . . . . . . .$188.9919776 Rear hub with 7/16" holes in both flanges for modelsfrom 1986 thru 1999 (repl. OEM 40976-86) . . . . . . . . . . . . . . . . . .$188.9919800 Front hub with 5/16" holes in both flanges(repl. OEM 43663-80A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$188.9919718 Rebuild kit (includes bearings, cones, seals, spacers,washers and retaining rings) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.9926051 Timken bearing and cone (repl. OEM 9052) . . . . . . . . . . . . . . . . . . .$12.4926138 Bearing only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.6426137 Race only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.9919682 Outer bearing spacers (repl. OEM 41196-73) sold in pairs . . . . . . .$4.8454331 Rubber oil seals (repl. OEM 47519-58) pack of 10 . . . . . . . . . . . . .$15.4954207 Rubber oil seals (repl. OEM 47519-83A) pack of 10 . . . . . . . . . . . .$15.4919684 Hub washers (repl. OEM 43559-73) sold in pairs . . . . . . . . . . . . . . . .$1.8419685 Hub retainer rings (repl. OEM 11027) sold in pairs . . . . . . . . . . . . .$5.3919686 Spacer 4.420" (repl. OEM 43601-78) Orange . . . . . . . . . . . . . . . . . . .$5.2919688 Spacer 4.434" (repl. OEM 43602-78) Yellow . . . . . . . . . . . . . . . . . . . .$5.8419689 Spacer 4.448" (repl. OEM 43603-78) White . . . . . . . . . . . . . . . . . . . . .$5.29Belt Pulley and Sprocket SpacerThis part was used on many Big Twin models from 1980 thru 1985. It wasmost commonly used on belt drive models to achieve the proper spacingof the rear belt pulley to the wheel. This spacer is required for use on ourrear wheels when used in many different applications. Fits Big Twin andSportster ® models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.4919722 Replaces OEM 40932-8113.20Prices appearing in this catalog are Suggested Retail Price and are subject to change*