Rittal - TE 7000

Spot-on: 482.6 mm (19˝) drawerto effortlessly accommodate surpluscables. Just one example of the infinitepossibilities with Rittal system accessories.Spot-on: Cable routing at every levelSimply secure, and it’s done. When it comes toperfect cable management, there are no limits tosolving individual requirements.Spot-on: Simple installationand removal of doorsand side panels, thanks to easy-fit hingebolts and locks.EVERYTHING IS SPOT-ON:OUTSTANDING AT ALL LEVELSRittal, as your system supplier, offers diversity through modulartechnology as part of its standard range. The benefit to you:cost-effective, time-saving configuration with system accessories.Precisely tailored to your requirements.Check out the details of the Rittal TE 7000: Optimum use of space,direct installation on the 482.6 mm (19˝) mounting frame, integral TS 8system punchings, depth-variable configuration. Plus securityconcepts to your precise requirements. After all, data protectionand availability are a key factor of your productivity.Rittal TE 7000 – everything is spot-on: simple, fast, flexible.Spot-on: Depth-variableinstallationUniversal interior installation withdepth-variable rails and componentshelves.Rittal TE 7000Spot-on: Effective space utilisationReady in a flash: Every dimension and every locatingpoint is precisely defined. All this plus matchingsystem accessories and components for powersupply, climate control and security.Spot-on: One-man assemblyFrom the base/plinth to the top-mountedfan, from the lock system to the comprehensivesecurity equipment – everythingcan be assembled by one person.5

6 Rittal TE 7000

TE 7000 server rackTop Efficiency – The TE 7000 as server rack!In depths of up to 1000 mm, the TE offers a rational, costeffectivesolution to your server room and data centre requirementswith a stable, depth-variable 482.6 mm (19˝) frame.Optimum installation access with the doors and wallsremoved.Rittal offers everything needed to configure a plug & playrack: Compatible modules for power supply, cooling,security, monitoring, and a comprehensive range of systemaccessories.Note:TE 7000 server racks,see page 22.613111147216815391218 17452120191022Example: System accessories forperfect configuration of a TE 7000server rackUse these examples to help you.Socket strips, lights, cable managementdevices and other system accessories areall available from Rittal, in a wide range ofvariants suitable for different applications.123456789101112Blanking panel, 482.6 mm (19˝), 2 UCable management panelCable routing bar, cranked, 4 UCable routing bar, 1 UMonitor/keyboard unit, 1 UPlug-in module, PSM, earthing-pinPlug-in module, PSM, earthing-pin, redPSM busbar, 2000 mmPlug-in module, PSM, IEC 320Plug-in modules, PSM, IEC 320, redCable routing bar, 4 UKVM switch SSC view 813 Component shelf, heavy duty14 Mounting kit, depth-variable,for 482.6 mm (19˝) component shelves15 Socket strip, 7-way16 Distributor clip17 UPS, single-phase18 Slide rail, depth-variable, 1 U19 Base/plinth trim, side20 Connection cable, single-phase21 Connection cable, three-phase22 Base/plinth components, front and rearRittal TE 70009

TE 7000 openTop efficiency – with free access!The Rittal TE 7000 open offers an infinitely adjustabledistance between 482.6 mm (19˝) levels, free airflow anda high load capacity. Because it offers free access fromall sides, even extensive cable routing in central networkjunctions becomes child’s play. The TE 7000 open allowseasy, practical management of even important surpluscables.Note:TE 7000 open,see page 21.815627912103411Example: System accessoriesfor perfect configuration of a TE 7000openUse these examples to help you.Socket strips, lights, cable managementdevices and other system accessories areall available from Rittal, in a wide range ofvariants suitable for different applications.12345678Patch panel for SC duplex couplingsCable management panel, 1 UPatch panel for ST couplingsCable routing bar, 4 UCable routing bar, 1 UDepth-variable punched sectionwith mounting flangeDrawer for surplus cablesPatch panel Cat 69101112Cable management panel, 1 UBlanking panel, 482.6 mm (19˝), 1 UTE socket strip, 8-wayCable routing bar, 1 URittal TE 700011

TE 7000 in RAL 9005Top Efficiency – also available in black!When function alone is not enough, the TE 7000 and manyaccessory components are also available in black, RAL 9005.All the well-known positive properties of the TE 7000 are,of course, included. Be it component shelves, panels forcable routing or the monitor/keyboard unit – aesthetics andform can now be placed at the forefront, without having tocompromise on function.6143526Example: System accessoriesfor perfect configuration of a TE 7000in RAL 9005Use these examples to help you.Socket strips, lights, cable managementdevices and other system accessories areall available from Rittal, in a wide range ofvariants suitable for different applications.123456Component shelves, heavy-dutywith telescopic slidesComponent shelves, unperforated,static installationMonitor/keyboard unit, 1 UCable gland panelCable management panelBlanking panel, 1 URittal TE 700013

NetworkingNetwork enclosures, based on Rittal TE 7000, pre-configuredTBTBHHBenefits:● 19˝ mounting angles front andrear always included● No frame structure,optimum accessibility● Load capacity up to 400 kg,static● Pre-configured solution, includingextensive accessory kitMaterial:Sheet steel, glazed door with4 mm single-pane safety glassSurface finish:Mounting frame:Electrophoretic dipcoat-primedEnclosure panels:Powder-coated, RAL 7035Pre-configuredPre-configuredU 24 42 PageWidth (B) mm 1) 800 800Height (H) mm 1) 1200 2000Depth (T) mm 1) 800 800Distance between 482.6 mm (19˝) mounting angles in its delivered state mm 495 495Model No. TE 7000.840 7000.850Model No. TE as bayed enclosure without side panels, including baying kit – 7000.852Supply includesSelf-supporting 482.6 mm (19˝) frame structure, depth-variable at the front and rear Glazed door at the front, including 130° hinge, two-point locking rod, recessed handleand security lock 3524 ESheet steel door at the rear, including 130° hinge, two-point locking rod and security lock 3524 E Pluggable weight-reduced side panels, including security lock 3524 E (7000.850 only)Base frame with maximum cut-out(for optional population with modular panels, solid, with passive ventilation or for cable entry)Roof plate including brush strip for cable entry and concealed cut-out for population via the active fan plate 4 levelling feet (including base/plinth adaptor) supplied loose Spacers, 20 mm, supplied loose to raise the roof Base/plinth 100 mm, vented Tested frame earthing to EN 60 950, fitted Accessory kit4 C rails, for cable clamping in the enclosure depth via cable clamps, supplied loose 10 cable shunting rings made of plastic, 105 x 70 mm, supplied loose 50 captive nuts, M6, conductive, supplied loose 50 multi-tooth screws, M6, with plastic washers, supplied loose Accessories TE, for direct mounting in the delivered stateErgoform-S handle for semi-cylinder, to exchange for the existing lock 2435.000 2435.000 25Fan module, with 2 fans and thermostat, pre-wired ready for connection 7000.670 7000.670 27Slide rail for TE, for attachment between the 482.6 mm (19˝) mounting frames, length 424 mm 7963.410 7963.410 3319˝ component shelf for static installation, for direct screw fastening without an installation kit, 412 mm deep,load capacity 30 kg, static7000.620 7000.620 29Punched section with mounting flange 17 x 73 mm, for mounting installation components,attached in the enclosure depth between the 482.6 mm (19˝) mounting frames8612.040 8612.040 34C rail, for cable clamping in the enclosure depth via cable clamps C rail, for cable clamping in the enclosure width via cable clamps,on the 482.6 mm (19˝) mounting frame at the rear7828.060 7828.060 35Cable clamp rail, depth-variable 325 – 575 mm, for cable attachment in the enclosure depth via cable ties 7858.160 7858.160 36Cable clamp rail for cable attachment in the enclosure depth using cable ties,on the 482.6 mm (19˝) mounting frame at the rear7828.062 7828.062 35Earthing kit for TE Economy socket strip, 8-way for earthing-pin plugs (German version only) 7000.630 7000.630 27 Included with the supply. 1) All sizes are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet.14 Rittal TE 7000

NetworkingNetwork enclosures, based on Rittal TE 7000, width 600TBHHEA19A = Defined mountingdistance for accessories,see below.Benefits:● Configured to order● No frame structure, maximumcable routing● Load capacity up to 400 kg,static.Material:Sheet steelSurface finish:Mounting frame:Electrophoretic dipcoat-primedEnclosure panels:Powder-coated,RAL 7035/RAL 9005Supply includes:Self-supporting 482.6 mm (19˝)frame structure, glazed door atthe front, two-point locking rod,recessed handle and securitylock 3524 E,sheet steel door at rear, twopointlocking rod and securitylock 3524 E, plug-in side panelswith security lock 3524 E,base frame with maximumcut-out (for optional populationwith module plates), roof platefor cable entry with concealedcut-out for fan, spacers forraising the cover plate, levellingfeet.Detailed drawing,available on the Internet.U (HE) 11 11 24 24 42 42 47 47Width (B) mm 1) 600 600 600 600 600 600 600 600Height (H) mm 1) 600 600 1200 1200 2000 2000 2200 2200Depth (T) mm 1) 600 800 600 800 600 800 600 800Distance between 482.6 mm (19˝) levelsas delivered A mm495 495 495 495 495 495 495 495Model No. TE, RAL 7035 7000.390 7000.410 7000.430 7000.440 7000.500 7000.510 7000.560 7000.570Model No. TE as a bayed enclosure without side panels,incl. baying kit, RAL 7035– – – – 7000.502 – 7000.562 –Model No. TE including side panels, RAL 9005 – – – – 7000.505 2) 7000.515 2) – –1)All sizes given are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet. 2) Delivery times available on request.ABCD495 mm – this is the distancebetween the two 482.6 mm(19˝) levels for all networkenclosures in their deliveredstate.Complies with TS 8 nominaldepth 400 mm, inner level.Pitch spacing 50 mm.The distance between the two482.6 mm (19˝) levels may bevaried in increments of 50 mm(445 to 695 mm).Distance from door:52.5 mm for depth 600152.5 mm for depth 800The mounting distance in arear mounting frame, horizontal,corresponds to the framemounting dimensions of a600 mm wide TS 8 (outer level,512 mm).E = A – 120 mmThe distance between levelsis freely selectable via the slotfastening. All key mounting components– punched sections withmounting flanges, installation kits,slide rails, component shelves –are also available in a depthvariableversion.600600AD800600AGerman registered designno. 403 07 489DCEABDRittal TE 700015

NetworkingNetwork enclosures, based on Rittal TE 7000, width 600U 11 11 24 24 PageWidth (B) mm 1) 600 600 600 600Height (H) mm 1) 600 600 1200 1200Depth (T) mm 1) 600 800 600 800Distance between 482.6 mm (19˝) levels in its delivered state A mm 495 495 495 495Model No. TE, RAL 7035 7000.390 7000.410 7000.430 7000.440Model No. TE as a bayed enclosure without side panels,incl. baying kit, RAL 7035– – – –Model No. TE including side panels, RAL 9005 – – – –DoorsGlazed front door/sheet steel rear door Sheet steel front door/sheet steel rear door on request on request on request on requestErgoform-S handle for semi-cylinder,in exchange for the existing lock2435.000 2435.000 2435.000 2435.000 25Side panelSide panel, plug-type,including security lock 3524 E 25Baying kit 7000.640 7000.640 7000.640 7000.640 25RoofRoof plate with brush strip for cable entry,prepared to accommodate an active fan unit Fan unit, 2 fans (max. 3) including thermostat 7000.670 7000.670 7000.670 7000.670 27Fan expansion kit 7980.000 7980.000 7980.000 7980.000 27Spacers 20 mm to raise the cover plate above the fan cut-out Base/plinthRoof frame with maximum cut-out for individual populationwith module plates, levelling feet M10 Module plate variants for individual population 24Base/plinth, vented 7000.690 7000.691 7000.690 7000.691 23Base/plinth trim, solid 7000.696 7000.696 7000.696 7000.696 23Base/plinth adaptor for levelling feet M12 8800.220 8800.220 8800.220 8800.220 24Levelling feet M12 4612.000 4612.000 4612.000 4612.000 24Internal installation/accessories482.6 mm (19˝) mounting frames front and rear Punched section with mounting flange 17 x 73 mm, for mountinginstallation components, attached in the enclosure depth between 8612.040 8612.040 8612.040 8612.040 34the 482.6 mm (19˝) mounting framesCable clamp rail, depth variable 325 – 575 mm,for cable attachment in the enclosure depth using cable ties7858.160 7858.160 7858.160 7858.160 36Cable clamp rail, for cable attachment in the enclosure width viacable ties, on the 482.6 mm (19˝) mounting frame at the rear7828.062 7828.062 7828.062 7828.062 35C rail, for cable clamping in the enclosure depth via cable clamps 7828.040 7828.040 7828.040 7828.040 35C rail, for cable clamping in the enclosure width via cable clamps,on the 482.6 mm (19˝) mounting frame at the rear7828.060 7828.060 7828.060 7828.060 35Earthing kit for TE 7000.675 7000.675 7000.675 7000.675 29TE socket strip, 8-way, with earthing-pin plug 7000.630 7000.630 7000.630 7000.630 27Power accessoriesIT Catalogue,from page 328IT Catalogue,from page 328IT Catalogue,from page 328IT Catalogue,from page 328Slide rail for TE, for attachment between the 482.6 mm (19˝)mounting frames, length 424 mm7963.410 7963.410 7963.410 7963.410 33482.6 mm (19˝) component shelf for static installation,for direct screw-fastening without installation kit, 412 mm deep,7000.620 7000.620 7000.620 7000.620 29load capacity 30 kg, staticCable management 34CMC-TC monitoring systemIT Catalogue,from page 158IT Catalogue,from page 158 Included with the supply.1) All sizes given are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet.IT Catalogue,from page 158IT Catalogue,from page 15816 Rittal TE 7000

NetworkingNetwork enclosures, based on Rittal TE 7000, width 600U 42 42 47 47 PageWidth (B) mm 1) 600 600 600 600Height (H) mm 1) 2000 2000 2200 2200Depth (T) mm 1) 600 800 600 800Distance between 482.6 mm (19˝) levels in its delivered state A mm 495 495 495 495Model No. TE, RAL 7035 7000.500 7000.510 7000.560 7000.570Model No. TE as a bayed enclosure without side panels,incl. baying kit, RAL 70357000.502 – 7000.562 –Model No. TE including side panels, RAL 9005 7000.505 2) 7000.515 2) – –DoorsGlazed front door/sheet steel rear door Sheet steel front door/sheet steel rear door on request on request on request on requestErgoform-S handle for semi-cylinder,in exchange for the existing lock2435.000 2435.000 2435.000 2435.000 25Side panelSide panel, plug-type,including security lock 3524 E (7000.500,7000.505 only) (7000.560 only) 25Baying kit (7000.502 only) 7000.640 (7000.562 only) 7000.640 25RoofRoof plate with brush strip for cable entry,prepared to accommodate an active fan unit Fan unit, 2 fans (max. 3) including thermostat 7000.670 7000.670 7000.670 7000.670 27Fan expansion kit 7980.000 7980.000 7980.000 7980.000 27Spacers 20 mm to raise the cover plate above the fan cut-out Base/plinthRoof frame with maximum cut-out for individual populationwith module plates, levelling feet M10 Module plate variants for individual population 24Base/plinth, vented 7000.690 7000.691 7000.690 7000.691 23Base/plinth trim, solid 7000.696 7000.696 7000.696 7000.696 23Base/plinth adaptor for levelling feet M12 8800.220 8800.220 8800.220 8800.220 24Levelling feet M12 4612.000 4612.000 4612.000 4612.000 24Internal installation/accessories482.6 mm (19˝) mounting frames front and rear Punched section with mounting flange 17 x 73 mm, for mountinginstallation components, attached in the enclosure depth between 8612.040 8612.040 8612.040 8612.040 34the 482.6 mm (19˝) mounting framesCable clamp rail, depth variable 325 – 575 mm,for cable attachment in the enclosure depth using cable ties7858.160 7858.160 7858.160 7858.160 36Cable clamp rail, for cable attachment in the enclosure width viacable ties, on the 482.6 mm (19˝) mounting frame at the rear7828.062 7828.062 7828.062 7828.062 35C rail, for cable clamping in the enclosure depth via cable clamps 7828.040 7828.040 7828.040 7828.040 35C rail, for cable clamping in the enclosure width via cable clamps,on the 482.6 mm (19˝) mounting frame at the rear7828.060 7828.060 7828.060 7828.060 35Earthing kit for TE 7000.675 7000.675 7000.675 7000.675 29TE socket strip, 8-way, with earthing-pin plug 7000.630 7000.630 7000.630 7000.630 27Power accessoriesIT Catalogue,from page 328IT Catalogue,from page 328IT Catalogue,from page 328IT Catalogue,from page 328Slide rail for TE, for attachment between the 482.6 mm (19˝)mounting frames, length 424 mm7963.410 7963.410 7963.410 7963.410 33482.6 mm (19˝) component shelf for static installation,for direct screw fastening without an installation kit, 412 mm deep, 7000.620 7000.620 7000.620 7000.620 29load capacity 30 kg, staticCable management 34CMC-TC monitoring systemIT Catalogue,from page 158IT Catalogue,from page 158 Included with the supply.1) All sizes given are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet.2) Delivery times available on request.IT Catalogue,from page 158IT Catalogue,from page 158Rittal TE 700017

NetworkingNetwork enclosures, based on Rittal TE 7000, width 800T1BHHEA19A = Defined mountingdistance for accessories,see below.Benefits:● Configured to order● No frame structure, maximumcable routing● Load capacity up to 400 kg,staticMaterial:Sheet steelSurface finish:Mounting frame:Electrophoretic dipcoat-primedEnclosure panels:Powder-coated,RAL 7035/RAL 9005Supply includes:Self-supporting 482.6 mm (19˝)frame structure,glazed door at the front,two-point locking rod, recessedhandle and security lock 3524 E,sheet steel door at rear, twopointlocking rod and securitylock 3524 E, plug-in side panelswith security lock 3524 E,base frame with maximumcut-out (for optional populationwith module plates), roof platefor cable entry with concealedcut-out for fan, levelling feet,spacers for raising the coverplate.Detailed drawing,available on the Internet.U (HE) 24 24 42 42 47 47Width (B) mm 1) 800 800 800 800 800 800Height (H) mm 1) 1200 1200 2000 2000 2200 2200Depth (T) mm 1) 600 800 600 800 600 800Distance between 482.6 mm (19˝) levels in its delivered state A mm 495 495 495 495 495 495Model No. TE, RAL 7035 7000.450 7000.460 7000.520 7000.530 7000.580 7000.590Model No. TE as bayed enclosure without side panels,including baying kit, RAL 7035– – – 7000.532 – 7000.592Model No. TE including side panels, RAL 9005 – – 7000.525 2) 7000.535 2) – –1) All sizes given are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet. 2) Delivery times available on request.ABCD495 mm – This is the distancebetween the two482.6 mm (19˝) levels for allnetwork enclosures in theirdelivered state.Complies with TS 8 nominaldepth 400 mm, inner level.Pitch spacing 50 mm.The distance between thetwo 482.6 mm (19˝) levelsmay be varied in incrementsof 50 mm (445 to 695 mm).Distance from door:52.5 mm for depth 600152.5 mm for depth 800The mounting distancein a rear mounting frame,horizontal, corresponds tothe frame mounting dimensionsof a 600 mm wide TS 8(outer level, 512 mm).E = A – 120 mmThe distance between levelsis freely selectable via the slotfastening. All key mounting components– punched sections withmounting flanges, installationkits, slide rails, componentshelves – are also available ina depth-variable version.600800AD800German registered designno. 403 07 489800ADCEABD18 Rittal TE 7000

NetworkingNetwork enclosures, based on Rittal TE 7000, width 800U (HE) 24 24 42 42 47 47 PageWidth (B) mm 1) 800 800 800 800 800 800Height (H) mm 1) 1200 1200 2000 2000 2200 2200Depth (T) mm 1) 600 800 600 800 600 800Distance between 482.6 mm (19˝) levels in its delivered state A mm 495 495 495 495 495 495Model No. TE, RAL 7035 7000.450 7000.460 7000.520 7000.530 7000.580 7000.590Model No. TE as a bayed enclosure without side panels,incl. baying kit, RAL 7035– – – 7000.532 – 7000.592Model No. TE including side panels, RAL 9005 – – 7000.525 2) 7000.535 2) – –DoorsGlazed front door/sheet steel rear door Sheet steel front door/sheet steel rear door on request on request on request on request on request on requestErgoform-S handle for semi-cylinder,in exchange for the existing lock2435.000 2435.000 2435.000 2435.000 2435.000 2435.000 25Side panelSide panel, plug-type,including security lock 3524 E (7000.530,7000.535only) (7000.590only)Baying kit 7000.640 7000.640 7000.640 (7000.532 (7000.5927000.640only)only)25RoofRoof plate with brush strip for cable entry,prepared to accommodate an active fan unit Fan unit, 2 fans (max. 3) including thermostat 7000.670 7000.670 7000.670 7000.670 7000.670 7000.670 27Fan expansion kit 7980.000 7980.000 7980.000 7980.000 7980.000 7980.000 27Spacers 20 mm to raise the cover plate above the fan cut-out Base/plinthRoof frame with maximum cut-out for individual populationwith module plates, levelling feet M10 Module plate variants for individual population 24Base/plinth, vented 7000.693 7000.694 7000.693 7000.694 7000.693 7000.694 23Base/plinth trim, solid 7000.698 7000.698 7000.698 7000.698 7000.698 7000.698 23Base/plinth adaptor for levelling feet M12 8800.220 8800.220 8800.220 8800.220 8800.220 8800.220 24Levelling feet M12 4612.000 4612.000 4612.000 4612.000 4612.000 4612.000 24Internal installation/accessories482.6 mm (19˝) mounting frames front and rear Punched section with mounting flange 17 x 73 mm, for mountinginstallation components, attached in the enclosure depth between 8612.040 8612.040 8612.040 8612.040 8612.040 8612.040 34the 482.6 mm (19˝) mounting framesCable clamp rail, depth variable 325 – 575 mm,for cable attachment in the enclosure depth using cable ties7858.160 7858.160 7858.160 7858.160 7858.160 7858.160 36Cable clamp rail, for cable attachment in the enclosure width viacable ties, on the 482.6 mm (19˝) mounting frame at the rear7828.062 7828.062 7828.062 7828.062 7828.062 7828.062 35C rail, for cable clamping in the enclosure depth via cable clamps 4943.000 4943.000 4943.000 4943.000 4943.000 4943.000 35C rail, for cable clamping in the enclosure width via cable clamps,on the 482.6 mm (19˝) mounting frame at the rear7828.060 7828.060 7828.060 7828.060 7828.060 7828.060 35Earthing kit for TE 7000.675 7000.675 7000.675 7000.675 7000.675 7000.675 29TE socket strip, 8-way, with earthing-pin plug 7000.630 7000.630 7000.630 7000.630 7000.630 7000.630 27IT Catalogue, Catalogue, Catalogue, Catalogue, Catalogue, Catalogue,328 328 328 328 328 328Power accessoriesfrom pageITfrom pageITfrom pageITfrom pageITfrom pageITfrom pageSlide rail for TE, for attachment between the 482.6 mm (19˝)mounting frames, length 424 mm7963.410 7963.410 7963.410 7963.410 7963.410 7963.410 33482.6 mm (19˝) component shelf for static installation,for direct screw fastening without an installation kit, 412 mm deep, 7000.620 7000.620 7000.620 7000.620 7000.620 7000.620 29load capacity 30 kg, staticCable management 34IT Catalogue, IT Catalogue, IT Catalogue, IT Catalogue, IT Catalogue, IT Catalogue,158 158 158 158 158 158CMC-TC monitoring systemfrom page from page from page from page from page from page Included with the supply.1) All sizes given are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet.2)Delivery times available on request.25Rittal TE 700019

20 SUNetworkingNetwork enclosures, based on Rittal TE 7000, metric attachment levelsTBHSUABenefits:● Configured to order● No frame structure, maximumcable routing● Load capacity up to 400 kg,staticMaterial:Sheet steelSurface finish:Nanoceramic-coating,electrophoretic dipcoat-priming,powder-coating in RAL 7035Supply includes:Self-supporting metric framestructure,glazed door at the front,two-point locking rod, recessedhandle and security lock 3524 E,sheet steel door at the rear,two-point locking rod andsecurity lock 3524 E,plug-in side panels with securitylock 3524 E,base frame with maximumcut-out (for optional populationwith module plates), roof platefor cable entry with concealedcut-out for fan,spacers for raising the coverplate, levelling feet.Detailed drawing,available on the Internet.SU 76 82Width (B) mm 2) 600 600Height (H) mm 2) 2000 2200Depth (T) mm 2) 600 600Distance between metric levels in its delivered state A mm 495 495Model No. TE 7000.508 1) 7000.568 1)Model No. TE as bayed enclosure without side panels, including baying kit 7000.504 1) 7000.564 1)1)Delivery times on request. 2) All sizes given are nominal dimensions. For absolute dimensions, please refer to the detailed drawing on the Internet.A495 mm – This is the distancebetween the twometric levels for all networkingenclosures in theirdelivered state.Complies with TS 8 nominaldepth 400 mm, inner level.The distance between levelsis freely selectable via theslot fastening.Size systems2512.5Explanation of the mounting dimensionsInterior installation600600ABCAInstallationwidthAmmBmmCmm20 SU 500 515 535ABA = Clearance widthB = Mounting dimensionC = External dimension of slide-in equipmentor front panel20 Rittal TE 7000

NetworkingTE 7000 openBBHE/SUHEHH19 /53519TTHE = UBenefits:Unlimited applications coveringall tasks in the IT sector. Both asa network distribution frame withmaximum accessibility from allsides for assembly and installation,and as a server rack witha high load capacity of up to700 kg, static. Unrestricted airflow,due to the open design.The standard cable trays in theroof area mean that even largequantities of cables are easilyrouted to the various levels withoutkinks.In a bayed configuration, the800 mm width in particular offersplenty of space for cable routingbetween units.There is an extensive range ofaccessories available for individualcable management solutions.The distance between attachmentlevels is infinitely variable.Material:Sheet steelSurface finish:Powder-coated, RAL 7035Load capacity:700 kg, staticSupply includes:Self-supporting frame structure,with a 482.6 mm (19˝) or metricattachment level front and reardepending on the design.Open roof frame for cable entry,3 cable routing trays. Open baseframe with 2 punched sectionswith mounting flanges for individualconfiguration in the width,levelling feet.Detailed drawing,available on the Internet.U/SU 42/– 42/– 42/76 47/82 42/– 47/– PageWidth (B) mm 600 800 600 600 800 800Height 3) (H) mm 2000 2000 2000 2200 2000 2200Depth (T) mm 800 800 1000 1000 1000 1000Distance between levels as delivered mm 495 495 745 745 745 745Model No. TE with 482.6 mm (19˝) attachment level 7000.930 7000.934 7000.940 7000.942 1) 7000.944 7000.946 1)Model No. TE with metric (535 mm) attachment level – – 7000.960 1) 7000.962 1) – –482.6 mm (19˝) accessories Packs ofCable management panel 482.6 mm (19˝),1 U for horizontal cable routing, with 5 steel rings,1 7257.035 7257.035 7257.035 7257.035 7257.035 7257.035 38zinc-plated passivated, size 100 x 37 mmCable management panel 482.6 mm (19˝),2 U for horizontal cable routing, with 5 steel rings,1 7257.100 7257.100 7257.100 7257.100 7257.100 7257.100 38zinc-plated passivated, size 120 x 80 mmShunting rings to accommodate large quantities ofcables, for mounting on the side of the mounting frame, 2 7220.600 7220.600 7220.600 7220.600 7220.600 7220.600 39dimension 300 x 90 mmCable management panel 482.6 mm (19˝), 2 U forhorizontal cable routing, with removable front panel1 7158.100 7158.100 7158.100 7158.100 7158.100 7158.100 38Component shelf 482.6 mm (19˝),1/ 2 U static installation, depth-variable1 7063.710 2) 7063.710 2) 7063.720 2) 7063.720 2) 7063.720 7063.720 29Slide rail 482.6 mm (19˝), load capacity 100 kg, staticfor distance between 482.6 mm (19˝) levels (internal) 2 – – 7063.740 2) 7063.740 2) 7063.740 7063.740 33740 mmSlide rail 482.6 mm (19˝), depth-variable in the rangefrom 590 – 930 mm, load capacity 80 kg, static2 7063.882 2) 7063.882 2) 7063.883 2) 7063.883 2) 7063.883 7063.883 33C rail, variable within the range 450 – 850 mm 1 7016.140 7016.140 7016.140 7016.140 7016.140 7016.140 37T-head rail, variable within the range 450 – 850 mm 1 7016.150 7016.150 7016.150 7016.150 7016.150 7016.150 37Cable route for vertical cable management,for mounting at the side rear of the 482.6 mm (19˝)mounting frame, B = 100 mm, H = 1700 mm1 set 7000.685 7000.685 7000.685 7000.685 7000.685 7000.685 401) Delivery times available on request.2) Not suitable for use with a metric attachment level.3) Plus 100 mm roof-mounting/cable-routing trays.Rittal TE 700021

Server racksBased on Rittal TE 7000, 1000 mm deepBTHHE19˝T2A = Defined mountingdistance for accessories,see below.Benefits:● No frame structure,optimum accessibilityStatic load capacity:700 kgMaterial:Sheet steelSurface finish:Mounting frame:Dipcoat-primedEnclosure panels:Powder-coated, RAL 7035/9005Supply includes:Self-supporting 482.6 mm (19˝)frame structure,vented sheet steel door frontand rear, two-point locking rod,recessed handle (front) andsecurity lock 3524 E,roof plate with brush strip forcable entry and concealedcut-out for fan integration,levelling feet.Detailed drawing,available on the Internet.U (HE) 42 42 42 42 PageWidth (B) mm 1) 600 600 800 800Height (H) mm 1) 2000 2000 2000 2000Depth (T) mm 1) 1000 1000 1000 1000Distance between 482.6 mm (19˝) levels in its delivered state A mm 745 745 745 745Model No. TEas bayed enclosure without side panels, including baying kitRAL 7035 7000.882 – 7000.892 –RAL 9005 – 7000.885 – 7000.895DoorsSheet steel door front and rear, fully vented,open surface area > 67 % perforated RoofRoof plate including brush strip for cable entry and with an optional fan BaseBase frame with maximum cut-out for cable entry or passive ventilation,can be fitted with optional blanking panels Interior installation482.6 mm (19˝) mounting frames front and rear AccessoriesSide panels, pluggable, including security lock 3524 E 7000.653 7000.663 7000.653 7000.663 25Ergoform-S handle for semi-cylinder, in exchange for the existing lock 2435.000 2452.000 2) 2435.000 2452.000 2) 25Fan unit, with 2 fans and thermostat, pre-wired ready for connection 7000.670 7000.671 3) 7000.670 7000.671 3) 27Transport castors, 4 castors including assembly parts 7000.672 7000.672 7000.672 7000.672 23C rail, for cable clamping in the enclosure width via cable clamps,on the 482.6 mm (19˝) mounting frame at the rear7828.060 7828.060 7828.060 7828.060 35Cable clamp rail, depth variable 500 – 895 mm,for cable attachment in the enclosure depth using cable ties7858.162 7858.162 7858.162 7858.162 36Cable clamp rail for cable attachment in the enclosure widthvia cable ties, on the 482.6 mm (19˝) mounting frame at the rear7828.062 7828.062 7828.062 7828.062 35Earthing kit for TE 7000.675 7000.675 7000.675 7000.675 29TE socket strip, 8-way for earthing-pin plugs 7000.630 7000.630 7000.630 7000.630 27 Included with the supply. 1) All sizes are nominal dimensions. For absolute dimensions, refer to detailed drawings on the Internet. 2) Matt nickel-plated.3) Delivery times available on request.22 Rittal TE 7000

System accessoriesBase/plinth, ventedfor TE 7000For easier cable routing between bayed enclosuresystems or as additional storage spacebeneath the enclosure, this vented completebase/plinth is easily screw-fastened underneath.The trim panels may be removed on all sides toallow cable routing in all directions.Base/plinth height:100 mmMaterial:Sheet steel, spray-finishedColour:RAL 7035/9005Supply includes:1 base/plinth, ventedincluding assembly parts.For enclosuresWidthmmDepthmmAccessories:ColourRALFilter mat for base/plinth, vented,600 mm wide DK 7561.500 and800 mm wide DK 7581.500,see IT Catalogue, page 258.Model No. DK600 1000 9005 7000.686800 1000 9005 7000.687600 600 7035 7000.690600 800 7035 7000.691600 1000 7035 7000.692800 600 7035 7000.693800 800 7035 7000.694800 1000 7035 7000.695Base/plinth trim, solidfor base/plinth, ventedTo be used in exchange for the existing trimpanel.If a solid design is required for the base/plinth forTE, the vented front and rear trim panels shouldbe exchanged for solid trim panels.Material:Sheet steel, spray-finishedColour:RAL 7035Supply includes:2 base/plinth trim panelsincluding assembly parts.For enclosure widthmmColourRALModel No. DK600 7035 7000.696800 7035 7000.698Transport castorsfor TEFor easy transportation between sites. The castorsmay be screw-fastened in the corner areaswithin the base frame in place of the levelling feet.Ground clearance: 58 mm,mounting thread M10 x 20Permissible static load:300 kg per enclosurePacks ofModel No. TE1 set 7000.672Supply includes:1 set = 4 castorsincluding assembly parts.Rittal TE 700023

System accessoriesBase/plinth adaptorfor levelling feetConnection component for fastening M12 levellingfeet PS 4612.000 to the TS base/plinth andbase/plinth, vented, for TE.Material:Sheet steel, zinc-plated, passivatedPacks ofModel No. TS4 8800.220Also required:Levelling feet PS 4612.000,see page 24.Levelling feet18 – 43 mm highTo compensate for height differences with floorirregularities. Thread length 40 mm.Assembly thread M12.Maximum permissible static load:approx. 300 kg per levelling foot.For:● Baying system TS 8● PC enclosure system● Pedestal base plateCP 6137.035 – CP 6137.535● Pedestal CP 6141.XXX● Industrial workstations● flexRack(i)● TEPacks ofModel No. PS4 4612.000Also required:For mounting on the TS base/plinth andbase/plinth, vented, for TE:Base/plinth adaptor TS 8800.220,see page 24.SW 19M12405818Ø 47Module platesfor TEThe base area of the TE may be varied asrequired using the module plates.Material:Sheet steelSupply includes:Assembly parts.VersionSolidWithbrush stripVentedCompensatingpanelWidthmmDepthmmModel No. TE450 200 7526.760450 550 7526.770450 750 7526.780650 550 7526.785650 200 7526.800650 750 7526.820450 200 7526.850650 200 7526.860450 200 7526.829650 200 7526.834450 50 7526.750450 150 7526.755650 50 7526.790650 150 7526.795TBEnclosure dimensionsmmB 600 600 600 800 800 800T 600 800 1000 600 800 1000B1T1Base cut-out dimensionsmmB1 450 450 450 650 650 650T1 550 750 950 550 750 950B = WidthT = Depth24 Rittal TE 7000

System accessoriesSide panelsfor TETo finish off individual racks or entire bayed suitesof racks at the sides.The side panels are simply located and securedwith the integral lock.The super-lightweight design means that it iseasily handled by one person.Material:Sheet steel, powder-coatedColour:RAL 7035/RAL 9005Protection category:IP 20Supply includes:Security lock 3524 E.For enclosuresHeightmmDepthmmPacksofModel No. TERAL 7035 RAL 90051200 600 2 7000.642 –1200 800 2 7000.644 –2000 600 2 7000.650 –2000 800 2 7000.652 –2000 1000 2 7000.653 7000.633 1)2200 600 2 7000.654 –2200 800 2 7000.656 –1)Delivery times available on request.Baying kitfor TE/TEFor connecting individual enclosures into bayedsuites at the sides. The enclosures are connectedbetween the base and roof frame.Material:Sheet steel, zinc-plated, passivatedSupply includes:Assembly parts.Packs ofModel No. TE4 7000.640The Ergoform-S lock systemThe unlocked handle folds down forwards,and the lock is opened by swivelling.Material:Die-cast zincSurface finish:Powder-coatedErgoform standardPrepared for the installation of semi-cylinders witha total length of 40 or 45 mm (to DIN 18 252),see page 26, all 27 mm lock inserts, version A,see page 26, as well as SZ lock and push-buttoninserts, see page 26.VersionModel No. SZRAL 7032with brown handle2450.000Brown 2451.000Matt nickel-plated 2452.000RAL 7032 2454.000RAL 7035 2435.000RAL 7032 1)with brown handle and bracket2455.0001) Hole diameter = 7 mm for padlockRittal TE 700025

System accessoriesLock and push-button insertsFor installation in● Comfort handle for semi-cylinder,see IT Catalogue, page 282● Ergoform-S standard,see page 25● Folding lever handle for CM,see Cat. 32, page 949.VersionModel No. SZLock insert no. 3524 E 2467.000 1)Push-button insert 2468.000Lock and push-button insert,lock no. 2123 E;2469.000 1)No other lock is possible1) with 2 keysPossiblealternative:Semi-cylinder,see page 26.Lock insertsVersion AMaterial:Die-cast zincLength 27 mmModel No. SZ7 mm square 2460.0008 mm square 2461.0007 mm triangular 2462.0008 mm triangular 2463.000Screwdriver 2464.000Daimler insert 2465.0003 mm double-bit 2466.000Fiat 2307.0006.5 mm triangular(CNOMO)2460.650Semi-cylinderto DIN 18 25240 mm, alternative closure, for individual locks inhandle systems with cylinder insert.Supply includes:3 keys.Packs ofModel No. CS1 set 9785.040Spacersfor cover plates TETo assist passive ventilation, spacers may beused to raise the cover plate.Material:Hexagonal sectional steel, zinc-plated,passivated.Supply includes:Assembly parts.Height mm Packs of Model No. TE20 4 7526.963Note:Spacers are already included with the supply ofthe TE enclosures.26 Rittal TE 7000

System accessoriesFan unit, activefor TEFor active ventilation of the TE 7000. The fan unitis installed in the prepunched cut-out. An additionalfan may optionally be integrated.Supply includes:Fan unit including assembly parts, 2 fans,1 thermostat and open connection cable.Technical specifications for one fan:Fan expansion kit DK 7980.000,see page 27.Technical specifications of thermostat:Rated operating voltage: 250 VTemperature range: +5°C to +55°CForenclosuresW x DmmAlldimensionsNo. ofpre-wiredfansNote:Connection via distributor box or country-specificconnector.Accessories:Fan expansion kit,see page 27.No. offanssupportedModel No. TERAL 7035 RAL 90052 3 7000.670 7000.671Active kitfor TEConsisting of fan unit including thermostat,fully wired ready for connection, socket strip(DK 7000.630) for up to 8 earthing-pin plugs,version D and connection cable (DK 7200.210).Packs ofModel No. DK1 set 7000.680Fan expansion kitFor retro-fitting various fan units or to supplementthe fan mounting plate and modular fan roof.Technical specifications DK 7980.000:Rated operating voltage: 230 V~Power consumption: 15/14 W at 50/60 HzAir throughput (unimpeded air flow):160/180 m 3 /h, 50/60 HzNoise level (unimpeded air flow): 37 dB (A)Temperature range: –10°C to +55°CTechnical specifications DK 7980.100:Rated operating voltage: 230 V~Power consumption: 14/12 W at 50/60 HzAir throughput (unimpeded air flow):108/120 m 3 /h, 50/60 HzNoise level (unimpeded air flow): 34 dB (A)Temperature range: –20°C to +70°CTechnical specifications DK 7980.148:Rated operating voltage: 48 V (DC)Power consumption: 7.7 WAir throughput (unimpeded air flow): 184 m 3 /hNoise level (unimpeded air flow): 43 dB (A)Temperature range: –20°C to +70°CDimensionsW x H x D mmPacks of Model No. DK119 x 119 x 38 1 set 7980.000119 x 119 x 25 1 set 7980.100119 x 119 x 25 1 set 7980.148Supply includes:Fan, including assembly parts and connectioncable (0.61 m).Socket strip TE8-way socket strip for earthing-pin plug/version D.The strip is made of plastic and may be mountedvertically on the TE frame or in the rear 482.6 mm(19˝) section. In the 482.6 mm (19˝) section, morethan 2 U of space is required. The sockets arearranged at an angle of 45° so that angular connectorsare also easily used. The socket strip issupplied with a 2 m connection cable. The connectioncable is attached in a terminal racewayin the strip.The terminal raceway is equipped with a separatecover, so that this connection point canalways be quickly and easily accessed. Theconnection cable is likewise easily replaced.Furthermore, the socket strip has external terminalsfor separate earthing.Socket strip TEModel No. DK8-way, earthing-pin 7000.630Technical specifications:Rated voltage: 230 Volt ACRated current: Max. 16 AConnection cable: Length 2 m, H05VV-F3G1.5 mm 2 , without connectors with wire end ferrulesRittal TE 700027

System accessoriesPower System ModulePSM PlusCurrent carrying capacity up to 192 A per rackAdditional variant of the successful Rittal PSMconcept, comprising a busbar with redundantconfiguration and three-phase infeed. The externaldimensions remain the same, as do the familiarattachment options.By integrating two further three-phase circuits thePSM now has four independent three-phaseinfeeds. Each of the feeds can be supplied withup to 3 x 16 A. In total, this produces a maximumof 192 A.This PSM is used particularly in applications withhighly-integrated blade server applications.Thanks to the design with four independentinfeeds, it is possible to configure a redundant,high-availability power supply system for IT racks,with all the familiar benefits of the PSM: Shockhazard-protected;may be retrofitted whilst thesystem is operational.The benefits at a glance:● 2 m busbar with four independent infeeds(A, B, C, D each 400 V/3~, 50/60 Hz, 3 x 16 A).● With four integral connection cables,5 x 2.5 mm and Wieland GST connectors.● Directly suitable for connecting to Rittal PDM.● Easily integrated into existing applicationswith standard extension cables.● 6 slots per 2 m rail.● Attachment with no loss of U in the rack.Note:There are modules with two infeeds for use of thenew PSM Plus rail. This means that redundancycan now be achieved at module level.PSM modules DK 7856.070 to DK 7856.240 mayalso be used. The second infeed option of the railis not used.The following modules are available:● 6-way C13,two infeeds with max. 16 A per 3 x C13● 4-way C19,two infeeds with max. 16 A per 2 x C19● 2-way, earthing-pin,two infeeds with max. 16 A per earthing-pinsocketBusbarFor enclosure heightmmNumber of modulesModel No. DK2000 6 7856.015Assembly kitWithoutcable routingWithcable routingFor TS For static installation 7856.011 7856.022Adjustable,for freely accessible7856.012 7856.023482.6 mm (19˝) levelFor TE For static installation 7000.684 –Plug-in modules(each half of themodules is suppliedwith one infeed)Number of socketsWithout miniature fuseEN 60 320 C136 (3 x per infeed) 7856.0814 (2 x per infeed) –EN 60 320 C194 (2 x per infeed) 7856.2312 (1 x per infeed) –Earthing-pin 2 (1 x per infeed) 7856.101Connection cable Type Length 5 mThree-phase mainsconnection cable,EN 60 309Extension cableThree-phase connector EN 60 309on Wieland GST socketWieland GST socketon Wieland GST 18 connector7856.0187856.017ACABCD28 Rittal TE 7000

System accessoriesLight 1 UComplete ready-to-connect light for installationin the 482.6 mm (19˝) mounting angles. The slotattachment additionally allows it to be fastened tothe 25 mm system punchings.Technical specifications:8 W, 230 V, 50 HzWith mains switch and 2.5 m connection cablewith fitted earthing-pin plug.Material:Aluminium, anodised,plasticPacks ofModel No. DK1 7109.200Complete earthing kitfor TETo DIN EN 60 950/VDE 0805, Ø 4 mm 2 , I max. 40 A.For system-compatible earthing of all enclosureparts on the enclosure frame according to VDE.The earth conductors are pre-assembled readyfor connection with connectors and cut to the rightlength.Packs ofModel No. TE1 set 7000.675Supply includes:Assembly parts.Component shelf,static installationon the 482.6 mm (19˝) mounting anglesfor TE, TS, FR(i)The component shelf is attached directly to thefront and rear 482.6 mm (19˝) mounting angles.Load capacity:30 kg surface load, staticMaterial:Sheet steelColour:RAL 7035Supply includes:Assembly parts.WidthmmHeightmmDepthmmDistancebetween19˝ levelsmmModel No.DK511 22 413 495 7000.620Note:Not suitable for combination with telescopicslides.Component shelf 1 /2 U,depth-variable482.6 mm (19˝)for TE, TS, FR(i), 19˝ system punchingsThis space-saving component shelf is screwfastenedto the front and rear 482.6 mm (19˝)mounting angles. It is infinitely depth-adjustableand may be fitted independently from the enclosure.Load capacity:50 kg surface load, staticMaterial:Sheet steelColour:RAL 7035/RAL 9005Distance betweenModel No. DKlevelsmmRAL 7035 RAL 9005400 – 600 7063.710 –600 – 900 7063.720 7063.725Note:Not suitable for combination with telescopicslides.Rittal TE 700029

System accessoriesComponent shelf,complete set, pull-outfor TETailored to the distance between levels in enclosuresas per their supplied state of 495 mm, thiscomplete set contains a vented component shelf,telescopic slides and a mounting kit for directattachment.The mounting kit also offers depth-variable attachmentwithin 395 mm to 645 mm with a 25 mmpitch pattern.Load capacity:50 kg, staticMaterial:Base: Sheet steel, spray-finished in RAL 7035Mounting kit/telescopic slides:Zinc-plated, passivatedSupply includes:1 component shelf, telescopic slides andmounting kit.Base depthmmPacks of Model No. DK500 1 set 7000.625Accessories:Handles for component shelf,see page 32.The easy route to a pull-out component shelf for the TE 7000BETG= B + T + E + GPull-outComponent shelfComponent shelfTelescopic slide(choice depending onload capacity and depthof component shelf)Installation kit(choice depending ondistance between levelsof TE 7000 and load capacityof component shelf)Handles(for component shelves)30 Rittal TE 7000

System accessoriesComponent shelf,482.6 mm (19˝) installationEnclosures with two482.6 mm (19˝) mounting levelsfor TE, TS, FR(i), 19˝ system punchingsDepending on their depth, the component shelveshave several attachment points, so the distancebetween the 482.6 mm (19˝) mounting angles isvariable within certain limits. Each componentshelf secured in this way can be retrospectivelyupgraded to full withdrawal using telescopicslides. For this purpose, the telescopic slides arescrew-fastened in place of the spacers.Load capacity:50 kg surface load, staticMaterial:Sheet steelColour:RAL 7035/RAL 9005Supply includes:Assembly parts.Note:For installation in one 482.6 mm (19˝) level:In conjunction with 3 U side parts, mounting ononly one 482.6 mm (19˝) level is possible.30 kg surface load, static.Also required:Adaptor for L-shaped mounting angles TS,see IT Catalogue, page 325.Installation kit, depth-variable, for installation onmounting frames and L-shaped mouning angles,see IT Catalogue, page 324.Accessories:Telescopic slides, see page 32.Cable support, hinged,see IT Catalogue, page 326.Side parts 3 U,see IT Catalogue, page 325.Possiblealternative:Component shelf, heavy duty,for 482.6 mm (19˝) population,see IT Catalogue, page 321.2950T = DepthT200 (T 500)10050Component shelf width mm 409 PageComponent shelf depth mm 300 400 500 600 700Distance between levels (X) 298 348/398 348/448/498 448/548/598 548/648/698Model No. DK RAL 7035 7143.035 7144.035 7145.035 7145.635 7145.735Model No. DK RAL 9005 – – 7145.005 7145.605 7145.705Accessories:Telescopic slides for 50 kg 7051.000 7061.000 7081.000 7161.000 7161.700 32Handles for component shelf 3636.010 3636.010 3636.010 3636.010 3636.010 321 Spacers2 Telescopic slides3 Adaptor4 Installation kit, depth-variableX Distance between levelsFor TS:Note for installation in network enclosuresbased on TS, cranked mounting angle:The component shelves are mounted on the sidesof the 482.6 mm (19˝) cranked mounting angleswith spacers on a U pitch pattern.X12For TS:Note for installation in network enclosuresbased on TS, L-shaped mounting angle:If L-shaped mounting angles are used, adaptorDK 7827.300 is required.3X12For TE, TS, FR(i), 482.6 mm (19˝) systempunchings:Note for installation between two mountingframes or L-shaped mounting angles:May be mounted directly on the 482.6 mm (19˝)system punchings using the depth-variableinstallation kit.4For TS, FR(i):Note for installation between mounting anglesand mounting frames:May be mounted directly on the 482.6 mm (19˝)system punchings using the depth-variableinstallation kit.42Rittal TE 700031

System accessoriesComponent shelf, heavy duty482.6 mm (19˝)for TE, TS, FR(i)● L-shaped mounting angles● Mounting frame 482.6 mm (19˝)Load capacity:100 kg surface load, staticMaterial:Sheet steelColour:RAL 7035/RAL 9005Supply includes:Assembly parts.WidthmmDimensionsHeightmmAlso required:DepthmmModel No. DKRAL 7035 RAL 9005409 45 400 7063.894 –409 45 500 7063.895 7063.835 1)409 45 600 7063.896 –409 45 700 7063.897 7063.8371)Delivery times available on request.Installation kit, depth-variable DK 7063.890,see IT Catalogue, page 324.Accessories:Telescopic slides (100 kg static) for 482.6 mm (19˝)component shelf, see page 32.Handlesfor pull-out component shelvesThe component shelves are prepared for theattachment of handles.Packs ofModel No. RP2 3636.010Material:Die-cast zincSurface finish:Spray-finished, silver-greySupply includes:Assembly parts.Telescopic slidesfor component shelvesFixed component shelves are easily convertedto full withdrawal. For this purpose, the existingfastening bolts or mounting rails (heavy-dutyversion) are exchanged for the telescopic slides.Technical specifications:For installation and locking on a 25 mm pitchpattern in the enclosure depth.Forcomponent shelfdepthmmPacksofModel No. DK50 kg 100 kg300 2 7051.000 –400 2 7061.000 7064.000500 2 7081.000 7065.000600 2 7161.000 7066.000700 2 7161.700 7066.700123Load capacity:50 kg/100 kg static per setMaterial:Sheet steel, zinc-plated, passivated123Fastening boltsMounting railsTelescopic slides32 Rittal TE 7000

System accessoriesSlide rails, heavy-dutyfor TS, FR(i), TEWith L-shaped mounting angles or 482.6 mm (19˝)mounting frame and a clearance between levelsof 740 mm.Easily and quickly installed thanks to locatingbrackets for the rear level.Load capacity:100 kg static loadMaterial:Sheet steel, zinc-plated, passivatedSupply includes:Assembly parts.Distance between19˝ levelsmmContact surfaceWidthmmDepthmmPacksofModel No.DK740 50 734 2 7063.74011.5 7.5Slide rails, depth-variable,1 Ufor server and network enclosureswith two 482.6 mm (19˝) mounting levels andL-shaped mounting anglesThe slide rail is pulled out to the required lengthand secured between the front and rear mountinglevel. Rear location lugs and front screw-fasteningenable convenient one-man assembly. Themounting component to be integrated is insertedhorizontally onto the slide rail and optionallysecured to the mounting level via its attachmentslots.Load capacity:80 kg/150 kg, static loadMaterial:Sheet steel, zinc-plated, passivatedSupply includes:Assembly parts.LengthmmLoadcapacitykgContactsurfacemmPacksofModel No.DK390 – 600 80 50 2 7063.882590 – 930 80 50 2 7063.883590 – 930 150 25 2 7063.884Note:The super-slimline design of the slide rail allows itto be used in most integration cases for 482.6 mm(19˝) mounting components. Because it issecured to the standardised mounting level, it ismanufacturer-independent.The slide rail slightly reduces the installationspace below the slide rail so that the U below it isonly available for limited use.Slide railsfor FR(i), TE and 482.6 mm (19˝) mountingframesFor mounting between a front and a rear pair ofmounting angles. The slide rails can be used tosupport heavy 482.6 mm (19˝) components.Load capacity:80 kg, static loadMaterial:Sheet steel, zinc-plated, passivatedSupply includes:Assembly parts.Distance between19˝ levelsmmPossiblealternative:Slide rail, depth-variable,see page 33.Contact surfaceWidthmmDepthmmPacksofModel No.DK395 85 324 2 7963.310495 85 424 2 7963.410595 85 524 2 7963.510695 85 624 2 7963.610795 85 724 2 7963.710Rittal TE 700033

System accessoriesTS punched sectionwith mounting flange,17 x 73 mmVariable, with 5 rows of holes for universal skeletonstructures or partial assembly. Simply locateinto the TS punchings and secure.Installation options:● On the vertical TS enclosure section− On the outer mounting level, all-round,at the same height− On the inner mounting level, all-round,height-offset● In CM via rail for interior installation− In the depth, for outer mounting level− In the width, for inner mounting level● In TE, TS, FR(i) on the 482.6 mm (19˝) mountingframe:− in the width− in the enclosure depth between two 482.6 mm(19˝) mounting frames depending on thedistance selected between the 19˝ levels.Material:Sheet steel, zinc-plated, passivatedSupply includes:Assembly screws.Note:See also table “Quick selection” on page 47.German patent no. 196 47 802For the outer mounting level 1)Forenclosure width/depth Packs of Model No. TSmm300 4 8612.130400 4 8612.140500 4 8612.150600 4 8612.160800 4 8612.1801000 4 8612.1001200 4 8612.1201)Note:In conjunction with plug-in side panels, notched punchedsections are required.For the inner mounting levelForenclosure width/depth Packs of Model No. TSmm300 4 8612.030400 4 8612.040500 4 8612.050600 4 8612.060800 4 8612.080900 4 8612.0901000 4 8612.0001200 4 8612.020Also required:For installation in CM, TP:Rail for interior installation,see Catalogue 32, page 992.Accessories:Screws,see IT Catalogue, page 315.Cable tie for quick assembly SZ 2597.000,see IT Catalogue, page 353.TS punched sectionwith mounting flange,17 x 73 mmdepth-variable for mounting framesfor DK-TS, FR(i), TEFor designing a flexible interior installation, or foraccommodating additonal components.The punched sections with mounting flanges maybe located in the enclosure depth between twomounting frames. An additional screw fasteningsecures the unit.The depth variability of the rails facilitates flexibleadaptation of their length to the existing attachmentdistance between the two 482.6 mm (19˝)mounting frames. An additional punched sectioncentre piece may be slid flexibly along the rail inthe depth and secured to slots. This faciliitatesflexible attachment at any point between themounting frames in the enclosure depth.LengthmmPacks of Model No. TE300 – 470 1) 2) 2 7000.676530 – 700 1) 2 7000.6781) Distance between 19˝ levels = length + 120 mm2)L < 420 mm, without centre pieceMaterial:Sheet steel, zinc-plated, passivatedSupply includes:2 variable punched sections with mountingflanges,including one sliding centre part each,including assembly parts.Note:See also table “Quick selection” on page 47.34 Rittal TE 7000

System accessoriesC rails 30/15to EN 60 715for TS, ESInstallation options:● On the vertical TS enclosure section− Via snap-on nut TS 8800.808 (Fig. left)− Via adaptor rail for PS compatibility● On the horizontal TS enclosure section(Fig. right)● On the ES system punchingsMaterial:Sheet steel, zinc-plated, passivatedNote:See also table “Quick selection” on page 47.Forenclosurewidth/depthmmAccessories:LengthmmCable clamps,see page 36.Support bracket or spacer,see IT Catalogue, page 313.Quick-assembly block,see IT Catalogue, page 313.Snap-on nut M8, TS 8800.808,see IT Catalogue, page 310.Adaptor rail,see IT Catalogue, page 303.PacksofModel No.PS500 455 6 4943.000600 555 6 4944.000800 755 6 4945.0001000 955 6 4946.0001200 1155 6 4947.000Possiblealternative:Rail for EMC shielding bracket and strain relief,see Cat. 32, page 1031.C railsfor DK-TS, CR ToptecFor direct mounting on the vertical enclosuresection.Thanks to the universally designed attachmentpiece, the C rails may optionally be attached tothe inner or outer level of the TS 8 frame.Material:Sheet steel, zinc-plated, passivatedSupply includes:Assembly parts.Note:See also table “Quick selection” on page 47.Forenclosurewidth/depthmmAccessories:Cable clamps,see page 36.LengthmmPacksofModel No.DK400 298 4 7828.040500 398 4 7828.050600 498 4 7828.060800 698 4 7828.080900 798 4 7828.0901000 898 4 7828.1001200 1098 4 7828.120Cable clamp railsfor TS and 482.6 mm (19˝) mounting framesThe cables may be attached to the cable clamprails with cable ties or nylon tapes. The cableclamp rails are simply located onto the framesection and may additionally be secured with ascrew.Material:Sheet steel, zinc-plated, passivatedSupply includes:Assembly parts.Note:See also table “Quick selection” on page 47.Accessories:Cable ties,see page 36.Nylon loop,see page 37.For the inner mounting levelFor enclosuresModel No.Packs ofWidth mm Depth mmDK600 600 4 7828.061800 800 4 7828.081900 900 4 7828.0911000 1000 4 7828.1011200 1200 4 7828.121For the outer mounting levelFor enclosuresModel No.Packs ofWidth mm Depth mmDK600 600 4 7828.062800 800 4 7828.082900 900 4 7828.0921000 1000 4 7828.1021200 1200 4 7828.122Rittal TE 700035

System accessoriesCable clamp rails,depth-variablefor TS and 482.6 mm (19˝) mounting framesFor strain relief of the routed cables. The cablesmay be attached to the cable clamp rails withcable ties or nylon tapes.The cable clamp rails may be located directly ona 482.6 mm (19˝) mounting frame horizontally atthe rear or in the enclosure depth between twomounting frames. An additional screw fasteningsecures the unit.The depth variability of the rails facilitates flexibleadaptation of their length to the existing attachmentdistance between the two 482.6 mm (19˝)mounting frames.Material:Sheet steel, zinc-plated, passivatedSupply includes:Assembly parts.Distance between19˝ levels Packs of Model No. DKmm325 – 575 4 7858.160500 – 895 4 7858.162Accessories:Cable ties,see page 36.Nylon loop,see page 37.Cable clampsfor C railsFor attaching the cables to the C rails.Material:Sheet steel, zinc-plated, passivatedSupply includes:Plastic insert.Forcable diameter Packs of Model No. DKmm6 – 14 25 7077.00012 – 18 25 7078.00018 – 22 25 7097.00022 – 26 25 7097.22026 – 30 25 7097.26030 – 34 25 7097.30034 – 38 25 7097.34038 – 42 25 7098.00042 – 56 25 7098.10056 – 64 25 7099.000Accessories:C rails,see page 35 onwards.Cable tiesThe super-fast solution for fastening cables tothe enclosure profile or mounting system parts.Simply clip into the round system punchings.LengthmmPacks of Model No. SZ150 100 2597.00036 Rittal TE 7000

System accessoriesNylon loopWith the nylon loop, secured cables are easilyreleased, allowing individual cables to be addedor removed. Ideal for sensitive data cables (fibreoptic/Cu),as it avoids indentations on the cablesheathing.In addition, the nylon loop may be screw-fastenedto the round system punchings or attachedusing a quick-release fastener.Colour:BlackSupply includes:Nylon loop and quick-release fastener.WidthmmLengthmmAlso required:Max. cablediametermmPacksofModel No.DK20 130 30 10 7072.22020 200 50 10 7072.23020 300 90 10 7072.240Screw SZ 2486.500 for screw-fastening to theround system punchings,see IT Catalogue, page 315.1Cable clamp, variablefor enclosure-independent mountingVariable attachment from 450 to 800 mm for flexiblecable clamping in two variants.Supports attachment to punched sections withand without mounting flanges and direct screwfasteningonto mounting plates and other flatsurfaces.Material:Sheet steel, zinc-plated, passivatedSupply includes:Assembly parts.Version Packs of Model No. DKC rail 1 7016.140T-head rail 1 7016.15012C railT-head rail2Cable management panel, 2 U482.6 mm (19˝)The cable routing chamber has cut-outs fromabove, into which the patch cables can beinserted. The cable management panel isequipped with a flap and quick-release fastenersat the front, for optimum access to the cables.From the rear, the cables can be inserted via acut-out with brush strips. With accommodationfacility for cable clamp straps DK 7610.000 orDK 7611.000.Material:Sheet steelColour:RAL 7035U Depth mm Model No. DK2 85 7158.035Accessories:Cable clamp straps,see IT Catalogue, page 356.Rittal TE 700037

System accessoriesCable management panel482.6 mm (19˝)For horizontal management of the patch cableswith 5 cable shunting rings, supplied loose.Material:Panel: Sheet steelRing: PolyamideColour:RAL 7035U Ring size mm Model No. DK1 70 x 44 7159.035Material:Panel: Sheet steelRing: PolycarbonateColour:RAL 7035U Ring size mm Model No. DK1 95 x 50 7255.035Material:Panel: Sheet steelRing: Sheet steel, zinc-plated, passivatedColour:RAL 7035U Ring size mm Model No. DK1 105 x 43 7257.0352 125 x 85 7257.1001 40 x 50 7257.200Material:Panel: Sheet steelRing: Sheet steel, zinc-plated, passivatedColour:RAL 9005U Ring size mm Model No. DK1 105 x 43 7257.0052 125 x 85 7257.105 1)1) Delivery times available on request.Note:The sizes given are external dimensions.38 Rittal TE 7000

System accessoriesShunting ring, plasticFor flexible cable routing, in two materials andthree size variants.Option of mounting on the 482.6 mm (19˝) enclosureand swing frame section of the data distributor,on the system strips of FM distribution enclosures,on all patch panels, on the Rittal Data Rackand all components on a 25 mm DIN pitch pattern.Polyamide version:Infinitely adjustable fastening by means of a slot.The shunting ring DK 7218.035 may also be usedon 1 U patch panels.Colour:RAL 7035MaterialDimensionsmmPacksofModel No.DKPolyamide 70 x 44 10 7218.035 1)Polyamide 105 x 70 10 7219.035 1)Polycarbonate 95 x 50 10 7228.0351) German patent no. 44 13 124Polycarbonate version:Variable mounting. With 45° attachment, the cableshunting ring may be attached to a 1 U panel.Colour:RAL 7035Possiblealternative:Cable management panel, 482.6 mm (19˝), 1 U,see page 38.Cable shunting ringFor flexible, system-compatible cable routing atthe side of the 482.6 mm (19˝) mounting frame.Material:Sheet steel, zinc-plated, passivatedSupply includes:Assembly parts.DimensionsmmPacks of Model No. DK125 x 85 10 7111.900125 x 65 10 7111.00085 x 43 10 7112.000Shunting ringTo accommodate large quantities of cables.Shunting ring for side attachment to 482.6 mm(19˝) extrusions and mounting frames in 800 mmwide network enclosures.The shunting ring is attached asymmetrically,creating a clearance of approx. 110 mm in front ofthe 482.6 mm (19˝) level. This allows even largequantities of cables to be effectively managed.Material:Round steel, zinc-plated, passivatedSupply includes:Assembly parts.DimensionsmmPacks of Model No. DK330 x 90/70 4 7220.600Rittal TE 700039

System accessoriesCable routing barsFor structured routing of entire cable bundles, thecable bars may be secured to a variety of differentpositions inside the enclosure.Material:Support: Sheet steelCable routing bars, connection combs: PlasticColour:RAL 9005Supply includes:Cable routing bars and connection combs.482.6 mm (19˝) attachmentFor horizontal cable routing within the distributorlevel.Thanks to their open mounting holes, they canalso be retrospectively slotted onto the 482.6 mm(19˝) system punchings of the mounting level atany time and secured with the existing mountingscrews of the installed components.PacksofNo. ofconnection combsU Model No. DK4 2 4 7111.22410 5 1 7111.214All-round attachment for universal useFor vertical and horizontal cable routing inside theenclosure or within the distributor level.PacksofNo. ofconnection combsU Model No. DK4 2 4 7111.22210 5 1 7111.212Cranked attachmentFor mounting angles and mounting frames.Horizontal, U-based cable routing to the distributorlevel.PacksofNo. ofconnection combsU Model No. DK4 2 4 7111.22010 5 1 7111.210Connection combFor connecting individual cable routing bars intocomplete systems (included with the supply).Cable trayon the mounting frameThe mounting kit facilitates rear, side attachmentof a cable tray to mounting frames inside enclosuresystems TE 7000, TS and FR(i). This allowsthe integration of vertical cable managementindependently of the enclosure frame.Material:Sheet steelPacks ofModel No. DK1 set 7000.685Surface finish:Zinc-plated, passivatedSupply includes:1 cable tray 100 mm wide, 1700 mm high,including mounting kit.40 Rittal TE 7000

System accessoriesCable ductfor TS/TEFor laying cable in particularly high packagingdensities (high density network nodes), in the fieldof optical fibre or copper cabling.Large capacity. A wide range of cable routing,cable clamping, channelling and cross-cablingoptions creates the requirements for maximumport density in the minimum possible space.The individual U-related cable routing makes itpossible to dispense with additional cable routingvia patch panels within the distributor level,thereby equipping every U with connection points.Increase in port density of up to 50 %.The removable duct cover, hinged on both sides,allows easy access at all times. The cable sectionsare held back by removable cross-barsto protect them against falling out. Mounting ispossible both on mounting rails at the sides,and on the mounting angles and mounting frameof the 482.6 mm (19˝) distributor level. Two ductsmay also be secured back-to-back. There is asecond, smaller variant available for intensivepartial installation.Material:Cable duct, front trim panel:Sheet steel, spray-finishedCable routing components: PlasticColour:RAL 7035Supply includes:Hinged front trim panel.DimensionsW x D mm95 x 235No. of UPacksofModel No. DK24 1 7827.31042 1 7827.320Note:When using the duct in conjuction with 482.6 mm(19˝) mounting frames and TS 8, the inner mountinglevel in the vicinity of the cable duct is notavailable.Note:Within the duct, additional cable ties may beattached to accommodate spare cables and forsystem-compatible cable deflection.Accessories:Cable ties for spare cables:Packs ofModel No. DK4 7827.330Cable entry panel482.6 mm (19˝)Cut-out 390 x 40 mm (2 U) or 390 x 20 mm (1 U)with brush insert. Option of accommodating cableclamp straps DK 7610.000 or DK 7611.000.Material:Sheet steelColour:RAL 7035UModel No. DK1 7140.5352 7150.535Other versions available on request.Accessories:Cable clamp straps,see IT Catalogue, page 356.Rittal TE 700041

System accessoriesCable routing channel482.6 mm (19˝)To hold the patching cables.Material:Sheet steelColour:RAL 7035U Depth mm Model No. DK1 85 7149.1353 100 7149.035Other versions available on request.Cable management panel, 2 UTo accommodate fibre-optic and copper cables.Fibres from the patch panels are placed into thetray via openings and may be distributed at thesides. Rounded openings protect the cablesheathing.Material:Sheet steelColour:RAL 7035UModel No. DK2 7269.135Cable management duct,horizontal482.6 mm (19˝)The duct facilitates concealed, simple cable routingof large quantities of cables to equipmentwithin the 482.6 mm (19˝) attachment level. Largecut-outs ensure convenient, kink-free cable routingto the components top and bottom.For simple handling, the entire front panel may beremoved via quick-release fasteners. After attachingthe cables, these are held in position via nylonties, whilst the duct may be resealed.Material:Sheet steelColour:RAL 7035Supply includes:5 nylon loops.UModel No. DK2 7158.1003 7158.150Cable tray, 2 UFor side routing and distribution of fibre-optic andcopper cables. In this way, cables inserted intothe roof area may be routed at the side of themounting angles in the upper section of the rack.Depth 85 mm.Material:Sheet steelColour:RAL 7035UModel No. DK2 7269.23542 Rittal TE 7000

System accessoriesDrawer 482.6 mm (19˝)to accommodate surplus cablesThe 1 U drawer offers a convenient opportunity forstoring surplus cables in an organised, compactand secure way within the 482.6 mm (19˝) levels.● With brush strip at the front for cable entry● T-head rail in the rear section for cableclamping● Ring-shaped kink-free routing of the conductorson adjustable elements in the interior● May be fitted between two 482.6 mm (19˝)levels at a distance of 435 – 750 mm● Independent from the enclosure system● Both on L-shaped and cranked mountingangles and mounting framesPacksofMaterial:Sheet steelColour:RAL 7035Supply includes:Assembly parts.Distance between levelsmmModel No. DK1 435 – 750 7063.200Accessories:Nylon loop DK 7072.220/DK 7072.230,see page 37.Surplus cable holderFor fastening at the rear area of the enclosure, orat the side of network enclosures. The surpluscable holder can be attached to all depth stays orto punched sections and rails with a 25 mm pitchpattern – mounting dimension 150 mm. Units mayalso be fastened to each other.Material:Sheet steelColour:RAL 7035W x H x DmmModel No. DK280 x 151 x 75 7220.500Blanking panel, 482.6 mm (19˝)As an extension cover or for population asrequired.Material:Sheet steelUInstallationModel No. DKPacksheightofmmRAL 7035 RAL 90051 44 2 7151.035 7151.0051.5 66 2 7157.035 –2 88 2 7152.035 7152.0053 132.5 2 7153.035 7153.005 1)6 266 2 7156.035 7156.005 1)1) Delivery times available on request.Rittal TE 700043

System accessoriesBlanking panel, 1 UToolless attachment, 482,6 mm (19˝)The blanking panel is used to seal open areaswithin the 482.6 mm (19˝) mounting level. Quicktoolless attachment means that it is easily integratedanywhere, and can also be removed againif necessary. Thanks to the consistent use ofblanking panels, targeted air routing can beensured in partially configured racks.Colour Packs of Model No. DKRAL 7035 10 7151.110RAL 9005 10 7151.105Material:PlasticSupply includes:10 blanking panels with integral quick-fastening.Drawer, 2 U, 3 Ufor one 482.6 mm (19˝) attachment levelFor front attachment to mounting angles,482.6 mm (19˝). With cover and telescopic slidesto accommodate assignment lists, operating manualsand small parts. The small version of the 2 Uvariant is also suitable for mounting inside a swingframe.Material:Sheet steelColour:RAL 7035Supply includes:Fully assembled,including assembly parts.HeightClearance openings InstallationWidth Depth depthmm mm mmModel No.DK2 U 411 244 250 7282.1352 U 411 419 427 7282.0353 U 411 419 427 7283.035Document drawercompartmentfor TE, TSClosed drawer compartment to accommodateup to 2 A4 folders with spine width < 50 mm,arranged one behind the other, convenient slidingextension piece on telescopic slides withlatching in both end positions.Mounting in the enclosure depth, externally at thesides on 482.6 mm (19˝) mounting angles and482.6 mm (19˝) mounting frames of enclosureswith width > 800 mm.Material:Sheet steelColour:RAL 7035Supply includes:Assembly parts.WidthmmHeightmmDepthmmModel No. DK73 365 605 7283.20044 Rittal TE 7000

System accessoriesKeyboard drawer 2 Ufor one 482.6 mm (19˝) attachment levelFor keyboards up to 430 mm wide and 250 mmdeep with the front panel folded over.Material:Sheet steel with aluminium front,spray-finished in RAL 7035Supply includes:Lockable drawer with handles,folding front,pull-out mouse pad,mouse support,practical cable entryand strain relief.HeightModel No. DK2 U 7281.035Installation depth: 390 mm.Cage nut – front mounting,482.6 mm (19˝)The cage nut consists of an expanding nut whichis simply inserted into the square attachment holeat the front and then secured with the assemblyscrew.When tightening the screw, the cage expands andthus secures the required components.Clamping range from 1.2 – 4.5 mm. Multi-toothscrew head, bit size T 30.Material:Sheet steelDimensionsmmSize of mountinghole mmPacksofModel No. DKM6 x 16 9.5 x 9.5 50 2094.400Surface finish:Zinc-plated, passivatedSupply includes:50 cage nuts including assembly screws andplastic washers.Assembly screwsM5 x 16 mm/M6 x 16 mmFor electronic equipment, 482.6 mm (19˝)installed components and blanking plates.Supply includes:Plastic washers.Version Packs of Model No. ELPhillips-head screw M5 100 2099.500Cheese-head screw M6 100 2093.200Phillips-head screw M6 100 2089.000Multi-tooth screwsM5 x 16 mm/M6 x 16 mmFor optimum transmission of torques, an extendedtool life and increased safety and reliability whentightening and loosening screw connections.Supply includes:Plastic washers.Bit size Packs of Model No. DKM5 Multi-tooth 25 100 7094.500M6 Multi-tooth 30 100 7094.600Rittal TE 700045

System accessoriesCaptive nuts M5/M6For the attachment of rack-mounted electronicequipment, 482.6 mm (19˝) installed equipmentand blanking plates to 482.6 mm (19˝) mountingangles.For use with metal thickness from 0.8 – 2.0 mm.In areas of narrow tolerance, captive nuts formetal thicknesses of 1.2 – 1.5 mm should beused. Optionally with or without contact of theinstalled equipment to the 482.6 mm (19˝) section/enclosure.Captive nut M5VersionCaptive nut M6For metalthicknessesmmPacksofModel No.ELWith contact 0.8 – 2.0 50 2094.500Without contact 0.8 – 2.0 50 2092.500VersionFor metalthicknessesmmPacksofModel No.ELWith contact 0.8 – 2.0 50 2094.200Without contact 0.8 – 2.0 50 2092.200With contact 1.2 – 1.5 50 2094.300Without contact 1.2 – 1.5 50 2092.300Adhesive measurement strip,482.6 mm (19˝)Made from robust aluminium foil, guarantees easyhandling and durability. With numerical labellingon an imperial pitch pattern for clear identificationof the various height units. The double-sidedlabelling allows the counting direction to be freelyselected, up to a maximum of 56 U. In this way,clear documentation of the various mounting partsis easily achieved.Material:Aluminium foilLabelling range U Packs of Model No. DK1 – 56 1 7950.10046 Rittal TE 7000

Engineering and consultancyInstallation dimensions(X)(Y)(Y)TETEEnclosurewidthmmEnclosuredepthmmMax. distancebetween 482.6 mm (19˝)levels (X)mmMin. clearance (Y)frontmmrearmm600 600 495 47 52600 800 695 47 52600 900 795 47 52600 1000 895 47 52800 600 495 47 52800 800 695 47 52800 900 795 47 52800 1000 895 47 52MountingMounting frameLoad information for 482.6 mm (19˝) racksF TE 7000TE 7000 800 mm wide 600 mm wideServer rack19˝ levels 2 2 21 2000 N 2000 N 3500 N2 4000 N 4000 N 7000 NQuick selection for TS 8 accessories for mounting on the TE 7000corresponds toDistance between levels(mm) TE 7000/TS 8mounting frame482.6 mm (19˝)Enclosure width/depthTS 8 (mm) mounting,outer levelEnclosure width/depthTS 8 (mm) mounting,inner levelTS punched sectionswith mounting flanges17 x 73 mmfor mounting ofinstallation components445 400 – 8612.140495 – 400 8612.040545 500 – 8612.150595 – 500 8612.050C rails,for cable clampingin the enclosure depthusing cable clips7828.0407828.050Cable clamp rails,for cable attachmentusing cable ties7858.160Depth-variable445 – 695 mm645 600 – 8612.1607828.0627828.060695 – 600 8612.060 7828.061845 800 – 8612.1807828.0827828.080895 – 800 8612.080 7828.081945 900 – –7828.0927828.090995 – 900 8612.090 7828.0911045 1000 – 8612.1007828.1027828.1001095 – 1000 8612.000 7828.101TE 7000/TS 8 mounting frame 482.6 mm (19˝)TS 8 frameCEABABDistance between the two482.6 mm (19˝) levelsSupplied state of networkenclosure: 495 mmSupplied state of server rack:745 mmThe mounting distance ina rear mounting frame,horizontal, correspondsto the frame mountingdimensions of a 600 mmwide TS 8, outer levelABBAA Outer levelB Inner levelRittal TE 700047

Outstanding benefitsof a complete IT infrastuctureEfficiency considerations – from acquisition, to operation,through to maintenance – indicate that Rittal offers decisivebenefits and cost advantages for entire IT infrastructureswith the RimatriX5:● Reduced planning costs, thanks to modular, scalablecomponents.● Lower investment costs coupled with investment security,thanks to maximum flexibility.● Lower operating costs, thanks to energy-efficient systemsfor cooling and power supply plus cost-effectiveadaptation to your requirements as they grow.● Reduced downtime and hence lower costs, thanks to ahigh level of availability plus remote maintenance andadministration.● Minimal installation and expansion costs thanks toplug & play technology, and the ability to make technicalmodifications with the system still operational.Rack● Perfectly designed cable management● Load capacity up to 1000 kg withinthe 482.6 mm (19˝) installation● Individual installation with a comprehensiverange of system accessories● Maximum useful interior volume● Approvals and certifications● Nanoceramic coating for maximumsurface protectionIT Catalogue, from page 12Power● Low-voltage switchgear (individualconfiguration)● 1- and 3-phase UPS systemswith 1 – 800 kW● Pre-configured low-voltage distributor(PDR)● Intelligent socket stripsIT Catalogue, from page 92Cooling● Passive cooling with perforation ofthe doors or base/plinth● Active room cooling with air circulationcooling units● High performance cooling (LCP)up to 30 kW/rackIT Catalogue, from page 11248 Rittal TE 7000

SecurityModular security management CMC● Logging of all security-relevantparameters in and on IT racks,such as temperature or humidity● Video monitoring● Uncomplicated, fast and flexiblewith wireless sensor networkIT Catalogue, from page 152Monitoring & remotemanagement● Access control system● SSC (Server Switch Control) forup to 2048 servers, depending onthe design● Software RiWatchIT● Modular KVM switches (SSC)IT Catalogue, from page 186ServiceIndividual Rittal service packagesfor optimum availability, sub-dividedinto:● Reachability● Response time● Spare parts availability● Maintenance● Warranty extensionIT Catalogue, from page 202Rittal – Complete IT competenceRRittalIT infrastructureWorldwide perfect systemsolutions for data centres.In RimatriX5, Rittal offersrack, power, cooling, securityand monitoring from asingle source.LampertzPhysicalIT securityOne-stop suppliers for datacentre structures.Modular IT security solutions,comprised of ITrooms, functional reliability,maintenance and repair.LitcosBusiness continuitymanagementOne of the leading companiesin Europe for theanalytical consultancy andholistic planning of datacentre structures.Rittal TE 700049

List of model numbersModel No. Page2089.000 452092.200 462092.300 462092.500 462093.200 452094.200 462094.300 462094.400 452094.500 462099.500 452307.000 262435.000 252450.000 252451.000 252452.000 252454.000 252455.000 252460.000 262460.650 262461.000 262462.000 262463.000 262464.000 262465.000 262466.000 262467.000 262468.000 262469.000 262597.000 363636.010 324612.000 244943.000 354944.000 354945.000 354946.000 354947.000 357000.390 15, 167000.410 15, 167000.430 15, 167000.440 15, 167000.450 18, 197000.460 18, 197000.500 15, 177000.502 15, 177000.504 207000.505 15, 177000.508 207000.510 15, 177000.515 15, 177000.520 18, 197000.525 18, 197000.530 18, 197000.532 18, 197000.535 18, 197000.560 15, 177000.562 15, 177000.564 207000.568 207000.570 15, 177000.580 18, 197000.590 18, 197000.592 18, 197000.620 297000.625 307000.630 277000.633 25Model No. Page7000.640 257000.642 257000.644 257000.650 257000.652 257000.653 22, 257000.654 257000.656 257000.663 227000.670 277000.671 277000.672 237000.675 297000.676 347000.678 347000.680 277000.685 407000.686 237000.687 237000.690 237000.691 237000.692 237000.693 237000.694 237000.695 237000.696 237000.698 237000.840 147000.850 147000.852 147000.882 227000.885 227000.892 227000.895 227000.930 217000.934 217000.940 217000.942 217000.944 217000.946 217000.960 217000.962 217016.140 377016.150 377051.000 327061.000 327063.200 437063.710 297063.720 297063.725 297063.740 337063.835 327063.837 327063.882 337063.883 337063.884 337063.894 327063.895 327063.896 327063.897 327064.000 327065.000 327066.000 327066.700 327072.220 377072.230 37Model No. Page7072.240 377077.000 367078.000 367081.000 327094.500 457094.600 457097.000 367097.220 367097.260 367097.300 367097.340 367098.000 367098.100 367099.000 367109.200 297111.000 397111.210 407111.212 407111.214 407111.220 407111.222 407111.224 407111.900 397112.000 397140.535 417143.035 317144.035 317145.005 317145.035 317145.605 317145.635 317145.705 317145.735 317149.035 427149.135 427150.535 417151.005 437151.035 437151.105 447151.110 447152.005 437152.035 437153.005 437153.035 437156.005 437156.035 437157.035 437158.035 377158.100 427158.150 427159.035 387161.000 327161.700 327218.035 397219.035 397220.500 437220.600 397228.035 397255.035 387257.005 387257.035 387257.100 387257.105 387257.200 387269.135 427269.235 42Model No. Page7281.035 457282.035 447282.135 447283.035 447283.200 447526.750 247526.755 247526.760 247526.770 247526.780 247526.785 247526.790 247526.795 247526.800 247526.820 247526.829 247526.834 247526.850 247526.860 247526.963 267827.310 417827.320 417827.330 417828.040 357828.050 357828.060 357828.061 357828.062 357828.080 357828.081 357828.082 357828.090 357828.091 357828.092 357828.100 357828.101 357828.102 357828.120 357828.121 357828.122 357856.015 287856.017 287856.018 287856.081 287856.101 287856.231 287858.160 367858.162 367950.100 467963.310 337963.410 337963.510 337963.610 337963.710 337980.000 277980.100 277980.148 278612.000 348612.020 348612.030 348612.040 348612.050 348612.060 348612.080 348612.090 348612.100 34Model No. Page8612.120 348612.130 348612.140 348612.150 348612.160 348612.180 348800.220 249785.040 2650 Rittal TE 7000

IndexAActive kitfor TE 27Adaptor– for levelling feet 24Adhesive measurement strip,482.6 mm (19˝) 46Assembly screws 45BBase/plinth– for TE 7000 23Base/plinth adaptor– for levelling feet 24Base/plinth trim panels– Solid 23Baying kit 25Blanking panel 43Busbar– Plug-in modules 28CC rails 35Cable clamp rails– Depth-variable 36– for TS and 482.6 mm (19˝)mounting frames 35Cable clamp, variable 37Cable clamps– for C rails 36Cable duct for TS/TE 41Cable gland panel– 482.6 mm (19˝) 41Cable management duct– horizontal, 482.6 mm (19˝) 42Cable management panel 37, 38Cable routing bars 40Cable routing channel– 482.6 mm (19˝) 42Cable shunting ring 39Cable ties 36, 41Cable tray– on the mounting frame 40Cable tray, 2 U 42Cage nut – front mounting,482.6 mm (19˝) 45Captive nuts M5/M6 46Complete earthing kit 29Component shelf– for TE 30– Heavy duty 32Component shelf 1 / 2 U, depth-variable 29Component shelf, static installation 29DDistributor frame TE 7000 open 21Document drawer compartmentfor TE, TS 44Drawers– 482.6 mm (19˝ ) 44– 482.6 mm (19˝),to accommodate surplus cables 43EEarthing kit, complete– for TE 29Enclosure light 29Ergoform-S lock system 25FFan expansion kit 27Fan unit, active– for TE 27Feet 24HHandles– Ergoform-S handle 25– for component shelves 32High density cable duct 41KKeyboard drawer 45LLevelling feet 24Lights 29Lock and push-button inserts 26Lock inserts 26MModule plates 24Mounting angles– C rails 35Mounting kit– for cable trays 40Multi-tooth screws 45NNetwork enclosures– Based on Rittal TE 7000 14, 19– Based on Rittal TE 7000 open 21– Based on Rittal TE 7000,metric attachment level 20Nylon loop 37PPlug-in PSM modules for busbar 28Punched section with mounting flange– 17 x 73 mm, TS 34Push-button and lock inserts 26SScrews 45Semi-cylinder 26Server integration 47Server racks– Based on Rittal TE 7000 22Shunting ring 39Side panels– for TE 25Slide rails– for FR(i), TE and 482.6 mm (19˝)mounting frames 33– Heavy-duty for TS, FR(i), TE 33Slide rails, depth-variable– 1 U 33Socket strip TE 27Spacers– for module plates TE 26Support strips– TS 34Surplus cable holder 43TTE 7000– Metric attachment level 20– Network enclosures 14, 19– Open, distributor frame 21– Server racks 22Telescopic slides– for component shelves 32Transport castors– for TE 23TS– Punched sectionwith mounting flange 34Rittal TE 700051

All in all – solutions from RittalIndustrial EnclosuresPower DistributionElectronic PackagingSystem Climate ControlIT SolutionsNetwork enclosures Server racks KVM technologyTelco racks Office solutions Distributor racksWall-mounted enclosures RimatriX5 Power managementconcepts IT cooling Monitoring Security Services KiosksCommunication SystemsRittal has one of the largest ranges of enclosures availablefor immediate delivery. However, Rittal also supplies integratedsolutions – up to Level 4. This comprises mechanicalinstallation, power supply, electronic components, climatecontrol and central monitoring. For all of your requirements.Fully assembled and functional. Wherever in the world youdevelop and implement solutions for yourself and yourcustomers, we are close at hand. The global alliancebetween production, distribution and service guaranteescloseness to the customer. Worldwide!02/09 E543Rittal GmbH & Co. KG Postfach 1662 D-35726 HerbornTelephone: +49(0)2772 505-0 Telefax: +49(0)2772 505-2319 eMail: info@rittal.de www.rittal.comSwitch to perfection