Microlift 50 & 100kg Double Decker Engineering ... - Stannah

Stannah Microlift: 50kg and 100kg Double Deckerengineering dataDouble Decker 50kg and 100kgModel Capacity Car # Entrance # Serving Height Shaft Pit Head(w x d x h) (w x h) Top Bottom (w x d) Depth roomcar car50B DD 50kg 520 x 520 x 800 420 x 770 1010 Floor 800 x 800 350 300050C DD 100kg 620 x 620 x 800 520 x 770 1010 Floor 900 x 900 350 3000100A DD 100kg 720 x 720 x 800 620 x 770 1010 Floor 1000 x 1000 350 3000100B DD 100kg 820 x 820 x 800 720 x 770 1010 Floor 1100 x 1100 350 3000Note:The above table shows our standard models. If you require a lift with specific dimensions manufactured for you,please contact us for details. All dimensions in mm.#Car and Entrance dimensions are nominal.Choice of entrance arrangementsEntrances are available on up to two sides –please call us for further information.This data sheet is for guidance only and must not be used for proper working drawings.Please contact Stannah for particular details before proceeding. Owing to our policy of continualimprovement, we reserve the right to alter specifications and dimensions without prior notice.

Stannah Microlift: 50kg and 100kg Double Deckerengineering dataSafe maintenanceaccessThe lift owner is responsiblefor ensuring a service engineeris able to access the motorcompartment in a safe manner.Access doors to the motorcompartment are requiredon one or two faces of thelift shaft, depending on theconfiguration of the lift.The doors must be hingedand lockable.Our builders work drawingscontain more detailedinformation on this topic butplease do not hesitate tocontact us if you have anyquestions.SpecificationCar:Speed:Entrances:Car entranceprotection:Entrancelocations:Control:Indicators:Travel:Mounting:Motor:Safety:With two lift cars in one the Double Decker allows two loadsto travel at once. The cars are constructed in stainless steeland the upper car only has a removable stainless steel shelf.0.35m/s.The upper landing entrances are protected by high qualityrise and fall shutters which are fitted with safety locks andfinished in stainless steel. The lower landing entrances areprotected by hinged door with a stainless steel finish.The upper lift car entrance is protected by a rise and fallshutter, the lower entrance by a collapsible car gate.Protecting the car entrance prevents goods from fallingwhile the lift is in motionEntrances are available on up to two sides – please refer tothe diagram overleaf for more information.Fully automatic push button control with call and sendbuttons at each entrance for ease of use.“Lift arrival”, “lift occupied” and “lift position” indicatorsare fitted at each entrance, together with an audible liftarrival buzzer.Up to 12 stops over a total distance of 30m of travel.The Microlift is supplied with a structure-supported framewhich is galvanised for longer life. We do not require aseparate motor room or “load-bearing” lift shaft.Mounted at the top of the lift structure, the smooth, quietmotor drives a high quality reduction gearbox fitted witha traction vee-sheave. An electro-magnetic disc brake issupplied, with emergency release mechanism. The reliablecontroller and counter-balance drive system ensure electricalconsumption is minimal.Complies with the Essential Safety Requirements (ESRs) ofthe Machinery Directive 2006/42/EC and EN 81-3 whereapplicable.Additional options include: heated car, additional and/or heated shelves (topcar only), intercom system, load weighing.MDDDS50/100 10/13Stannah Microlifts LtdCaxton Close, East Portway, Andover, Hampshire SP10 3QNTel: 01264 351922www.stannahlifts.co.uk