Microlift/Trolleylift Brochure2.15MBIncluding 50-300kg. - Stannah

Trolleylift Dimensions250kgModel Capacity Car Entrance Serving Shaft Pit Headroom(w x d x h) (w x h) Height (w x d) Depth250HP 250kg 1000 † x 950 † x 1175 770 † x 1090 Floor 1320 x 1320 175* 2800250CP 250kg 1000 † x 950 † x 1175 770 † x 1090 Floor 1320 x 1320 175* 2800300kgModel Capacity Car Entrance Serving Shaft Pit Headroom(w x d x h) (w x h) Height (w x d) Depth300HP 300kg 1000 † x 950 † x 1775 770 † x 1690 Floor 1320 x 1320 600* 3000300HP 300kg 1000 † x 950 † x 1975 770 † x 1890 Floor 1320 x 1320 600* 3200(1975 high car)300CP 300kg 1000 † x 950 † x 1775 770 † x 1690 Floor 1320 x 1320 600* 3000HP = single hinged steel landing doorCP = concertina shutter leaf landing gate (not available on 1975mm high car)* Important Note about Pit:The Trolleylift normally serves at floor level and would require a pit in the lowest floor. If you are unable to providea pit the Trolleylift can be installed to serve at 175mm above the lowest floor and a ramp will need to be providedby your builder. A reduction in the pit depth on the 300kg model to 175mm is possible on certain models – pleasecontact us for details.Notes:†If the car has a through/adjacent car entry arrangement, the car depth/width will be reduced by 50mmUpper landing: Single hingedsteel doorLower landing: Optional concertinashutter leaf gate1,937Trolleylifts installed in the UK300maximum load in kilos105average loads per day3days to install17