ARO Extrusion - Finishing Consultants

More documents

Recommendations

Info

<strong>Extrusion</strong> Systems • 55 GallonOrderingPackages include Pump, 651616-X Ram, Follower Plate Assembly,65940 Filter-Regulator-Lubricator Kit, 91790 Air Motor Muffler & 90° Outlet Elbow.To get the desired pump ratio and follower options, replace the X with appropriatenumbers from the “Pump Information,” “Follower Options” and “Packing Options”Charts.NP6 XXR - XX - XXXSeries6” Air MotorPumpInformation21 60:1 Stainless Steel 2-Ball Pump(#650685-X43)22 45:1 Stainless Steel 2-Ball Pump(#650684-X43)24 23:1 Stainless Steel 2-Ball Pump(#650683-X43)31 46:1 Carbon Steel Chop CheckPump (#650692-X43-B)34 23:1 Carbon Steel Chop CheckPump (#650691-X43-B)Packing Options343 Glass-Filled Teflon (Upper & Lower)C43 UHMW-PE (Upper & Lower)G43 UHMW-PE/Leather StaggeredP43 UHMW-PE/Teflon Staggered (Upper) /UHMW-PE (Lower)R43 Teflon/UHMW-PE Staggered (Upper) /Teflon (Lower)Follower Options02 Aluminum Follower Plate withPolyurethane Double-Lipped Seal52 Teflon Coated AluminumFollower Plate with PolyurethaneDouble-Lipped SealPopular Model Example:NP624R-02-G43Packages include Pump, 651616-X Ram, Follower Plate Assembly,651729 Filter-Regulator-Lubricator Kit 92460, Air Motor Muffler & 90° Outlet Elbow.NP8 XXR - XX - XXXNP834R-02-G438” Air MotorPumpInformation34 44:1 Carbon Steel Pump(#650891-X47-B)Packing Options34D Glass-Filled Teflon (Upper & Lower)C4D UHMW-PE (Upper & Lower)G4D UHMW-PE/Leather StaggeredP4D UHMW-PE/Teflon Staggered (Upper) /UHMW-PE (Lower)R4D Teflon/UHMW-PE Staggered (Upper) /Teflon (Lower)Follower Options02 Aluminum Follower Plate withPolyurethane Double-Lipped Seal52 Teflon Coated Aluminum FollowerPlate with Polyurethane Double-Lipped Seal
<strong>Extrusion</strong> AccessoriesFloor MountsModelPumpsNumber Description Used With65138 Floor Mount - Accepts suction line 4 1 ⁄4” & 6” air motor, 2-ball andfrom bulk containers or mixing tanks. extrusion pumps. Also 8”3” NPT(F) inlet. 1/4” NPT(F) 38:1 2-ball and 44:1vent port with plug.extrusion pumps.65139 Floor Mount - Accepts suction line 8”, 10” and 12” air motor 2-ballfrom bulk containers or mixing tanks. and extrusion pumps. Except3” NPT(F) inlet. 1/4” NPT(F) vent 8” 38:1 2-ball and 44:1port with plug.extrusion pumps.Bulk/Tote tank Supply Components65139ModelNumberADescription628088-7 Material Supply Hose - Heavy duty (1” diameter) hose features neopreneconstruction with a 5,000 psi max. working pressure capacity. Both ends 1”NPT(M). Length: 7 ft.B67073 Ball Valve - For use with 628088-7 material supply hose. 4,500 psi max.working pressure rated.AC628089-X Material Hose With Fittings - 3” diameter hose has cross-linkedpolyethylene (internal) and neoprene (external) construction. Hose comeswith female cam-lever locking coupler, male adapter, cam-lever locking dustcap and dust plug. Length: 2 ft. (628089-2), 4 ft. (628089-4) & 6 ft. (628089-6). Maximum working pressure: 125 psiBCDD65138, Pump Floor Mount - See above for floor mount information.65139Rams for 5-Gallon DrumsACCESSORIESModel Used Follower PlateNumber Description With Used With651613-B Two Post Ram “N” Series 22:1 & 651840-14 1 ⁄4” air motor pumps 66731-1651615-B Single Post Ram - For use with “N” Series 651840-X,materials up to 1,000,000 CPS viscosity. 22:1 pumps or FollowerFor 5-gallon containers. Hold-down & 4 1 ⁄4” air motor Platesclamps secure pail. 66713 Portability Kit 43:1 extrusionavailable for mobile applications.pump651613-B66713 Portability Kit - Mounts directly to 651615-Bthe base of the 651615-B Ram, toSingle Postallow ease of portability. Will clearRams and28” (711 mm) openings. Has 12” Ram packages(305 mm) tires.651615-B
Page 2 and 3: Check OutThese OtherIR IndustrialPr
Page 4 and 5: Extrusion InformationExtrusion Pump
Page 6: Model Reference Index • Extrusion
Page 10 and 11: Extrusion Packages • 5 GallonPack
Page 12 and 13: Extrusion Systems • 5 GallonPacka
Page 16: Extrusion AccessoriesRamsTwo Post R
Page 19 and 20: Extrusion AccessoriesFollower Plate
Page 21 and 22: Extrusion AccessoriesFollower Plate
Page 23 and 24: Extrusion AccessoriesAutomatic Extr
Page 25 and 26: Extrusion AccessoriesAir Filter/Reg
Page 27 and 28: AccessoriesCSN-30CHW-30Typical Inst
Page 29 and 30: Picking the Right ARO PumpPump Perf
Page 31 and 32: 4-1/4”, 9:1, -2-Ball • Piston P
Page 33 and 34: 8”, 10:1, 2-Ball • Piston Pumps
Page 35 and 36: 4-1/4”, 11:1, 2-Ball • Piston P
Page 37 and 38: 8”, 13:1, Chop Check • Piston P
Page 39 and 40: 10”, 15:1, 2-Ball • Piston Pump
Page 41 and 42: 4-1/4”, 22:1, 2-Ball • Piston P
Page 45 and 46: 4-1/4”, 23:1, Chop Check • Pist
Page 49 and 50: 12”, 30:1, Chop Check • Piston
Page 51 and 52: 8”, 40:1, 2-Ball • Extrusion Pu
Page 53 and 54: 4-1/4”, 43:1, Chop Check • Extr
Page 55 and 56: 6”, 45:1, 2-Ball • Piston Pumps
Page 61 and 62: 2 in 2 , 3.6:1, Chop Check • Pist
Page 63: IR CompanyP.O. Box 151 • One Aro

ARO Extrusion - Finishing Consultants

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?