ARO Extrusion - Finishing Consultants

More documents

Recommendations

Info

Extrusion AccessoriesExtra Heavy-Duty Rams55-Gallon ContainersHeavy-duty Ram - Features 5-1/2” diameter post construction capable ofdelivering 0-11 psi* follower down force. This extra measure of down forcemakes the 651612 Ram the best choice for the hard-duty supply of heavy inks,RTV silicones, caulkings, varnishes, highly viscous adhesives and much more.* WARNING: Before using maximum follower down force, check container or consult container manufacturer for maximum pressure rating.651612-XModel: Follower: Plate Style: Container: Pump Size: Coating: Wiper Type: Wiper Material651612-1 66516 Flat 55-Gallon Small None Double Lip Nitrile651612-2 66516-1 Flat 55-Gallon Small None Double Lip Polyurethane651612-3 66516-2 Flat 55-Gallon Small None Double Lip EPR651612-4 66517 Flat 55-Gallon Large None Double Lip Nitrile651612-5 66517-1 Flat 55-Gallon Large None Double Lip Polyurethane651612-6 66517-2 Flat 55-Gallon Large None Double Lip EPR651612-7 66517-2 Flat 55-Gallon Large None Double Lip EPRSingle Post RamsSingle Post Ram / Lift - Provides responsive pump lifting and pumplowering – with sufficient downforce to permit pump extrusion of materials up to500,000 c.p.s. It’s ability to revolve 360-degrees allows the ongoing placementand rotation of three, 55-Gallon containers – a critical feature in applications thatdemand continuous material supply.Model Fits Height Height AirNumber ARO Pump Raised Lowered Inlet651614-1 4-1/4”-6” Air Motors 110” 63” 1/4” NPT651614-2 8” to 12” Air Motors 110” 63” 1/4” NPT651614-3 Small Hydraulic Motor 110” 63” 1/4” NPT651614-4 Large Hydraulic Motor 110” 63” 1/4” NPTThe above models include the brackets and hardware needed to accommodate two-ballor extrusion tie-rod style pumps.651614-2(Pump, Follower, and FollowerAssist Kit sold separate)651614-1(Pump sold separate)Get in the
Extrusion AccessoriesFollower Plates 5 Gallon Containers66469 66732-1651842-1Model: Material: Coating: Wiper Type: Wiper Material: Ram/Lift PumpUsed With:Used With:66469 Carbon Steel None Single Lip Nitrile 651614-1, 651616-X 4-1/4” & 6” Integrity651615-B Rams,640169 Pumps*66731 Carbon Steel Electroless Nickel Single Lip Nitrile 651615-B Rams NM2322X-11-X,4-1/4” air motor, 9:1& 46:1 ratio pumps66731-1 Carbon Steel Electroless Nickel Double Lip Polyurethane 651614-4, 651616 4-1/4” air motor, 9:1& 651615 B Rams & 46:1 ratio pumps66731-2 Carbon Steel Electroless Nickel Double Lip EPR 651614-1, 651615-B Rams NM2322X-11-X,4-1/4” air motor, 9:1& 46:1 ratio pumps66732 Carbon Steel Electroless Nickel Double Lip Nitrile 651614-1, 651615-B Rams 4-1/4” & 6” air motorIntegrity* pumps. 8”motor 44:1 extrusion& 40:1 Integrity Pumps66732-1 Carbon Steel Electroless Nickel Double Lip Polyurethane 651614-1, 651615-B Rams 4-1/4” & 6” air motorIntegrity* pumps. 8”motor 44:1 extrusion& 40:1 Integrity Pumps66732-2 Carbon Steel Electroless Nickel Double Lip EPR 651614-1, 651615-B Rams 4-1/4” & 6” air motorIntegrity* pumps. 8”motor 44:1 extrusion& 40:1 Integrity Pumps651840-1 Carbon Steel None 290-mm Single Lip Polyethylene/ 651615-B Rams NM2322X-11-XUrethane65778 Lift651840-2 Carbon Steel None 295mm. Designed Nitrile 651615-B Rams NM2322X-11-Xfor metric pails65778 Lift651840-3 Carbon Steel None 311.9mm. Designed Polyethylene/ 651615-B Rams NM2322X-11-Xfor metric pails. Urethane 65778 Lift651841-1 Stainless Steel None 290-mm Polyethylene/ 651615-B Rams 4-1/4” motor 43:1Urethaneratio pumps651842-1 Stainless Steel None 290-mm Polyethylene/ 651615-B Rams Integrity PumpsUrethane(No adapter required)ACCESSORIESAccessories91364-10 Seal Protectors - Package of 10 for 5-gallon followers 5-gallonto be inserted between the follower plate and the material Follower Platesin the container. This helps to prevent corrosive materialsfrom attacking the wiper and reduces clean-up time.67136 Follower Plate Adapter - For attaching Integrity 66248 & 66516to follower plates or floor stand. Includes stainless Followers.steel adapter w/2” NPT(F) threads, seal and 651616-1,-2,-3 Rams.hardware.65138 Floor Mounts67136
Page 2 and 3: Check OutThese OtherIR IndustrialPr
Page 4 and 5: Extrusion InformationExtrusion Pump
Page 6: Model Reference Index • Extrusion
Page 10 and 11: Extrusion Packages • 5 GallonPack
Page 12 and 13: Extrusion Systems • 5 GallonPacka
Page 14 and 15: Extrusion Systems • 55 GallonOrde
Page 16: Extrusion AccessoriesRamsTwo Post R
Page 21 and 22: Extrusion AccessoriesFollower Plate
Page 23 and 24: Extrusion AccessoriesAutomatic Extr
Page 25 and 26: Extrusion AccessoriesAir Filter/Reg
Page 27 and 28: AccessoriesCSN-30CHW-30Typical Inst
Page 29 and 30: Picking the Right ARO PumpPump Perf
Page 31 and 32: 4-1/4”, 9:1, -2-Ball • Piston P
Page 33 and 34: 8”, 10:1, 2-Ball • Piston Pumps
Page 35 and 36: 4-1/4”, 11:1, 2-Ball • Piston P
Page 37 and 38: 8”, 13:1, Chop Check • Piston P
Page 39 and 40: 10”, 15:1, 2-Ball • Piston Pump
Page 41 and 42: 4-1/4”, 22:1, 2-Ball • Piston P
Page 45 and 46: 4-1/4”, 23:1, Chop Check • Pist
Page 49 and 50: 12”, 30:1, Chop Check • Piston
Page 51 and 52: 8”, 40:1, 2-Ball • Extrusion Pu
Page 53 and 54: 4-1/4”, 43:1, Chop Check • Extr
Page 55 and 56: 6”, 45:1, 2-Ball • Piston Pumps
Page 61 and 62: 2 in 2 , 3.6:1, Chop Check • Pist
Page 63: IR CompanyP.O. Box 151 • One Aro

ARO Extrusion - Finishing Consultants

Create successful ePaper yourself

Delete template?

Save as template?