ARO Extrusion - Finishing Consultants

Extrusion AccessoriesOver-Run ControlsPumps Air Air PressureModel Used Inlet Outlet RangeNumber Description With NPT NPT PSI (bar)635040 ARO-STOP ® Valve “N” Series, 1/4 (F) 1/4 (M) 20-175Shuts off air to the pump air motor (1.4-12)when material container is pumpsempty or line is broken. onlyQuick set and reset feature.23644-400 ARO-STOP ® Valve 4 1 ⁄4” & 1/2 (F) 1/2 (M) 20-175Shuts off air to the pump 6” air (1.4-12)when material container is motorempty or line is broken. pumpsQuick set and reset feature.635040635043 ARO-STOP ® Valve 8’, 10” 3/4 (F) 3/4 (M) 20-175Shuts off air to the pump & 12” (1.4-12)when material container is air motorempty or line is broken. pumpsQuick set and reset feature. onlyAir Motor MufflerPump Air SizeModel Used Inlet Inches X InchesNumber Description With NPT PSI (bar)91790 Air Motor Muffler 4 1 ⁄4” & 6” 1-1/4 (M) 3-1/2 x 11-3/16Reduces air exhaust noise level air motor (89 x 284)to acceptable OSHA standards. pumps92460 Air Motor Muffler 8” air motor, 1-1/4 (M) 5-5/8 x 15-3/8Reduces air exhaust noise level pumps (143 x 391)to acceptable OSHA standards.66718 Air Motor Muffler 10” & 12” Bolted-on 9 x 20Reduces air exhaust noise level air motor, (229 x 508)to acceptable OSHA standards. pumps917909246066718Wet Sol “Plus”ModelUsedNumber Description With66333-B Wet Sol - One Quart Container All pumps with wet cups.Designed to prolong packing life by keepingthe piston rod and packings wetted. Alsoreduces the possibility of material hardeningon the piston rod.66334-B Wet Sol - One Gallon Container66334-BGet in the