10.07.2015 Views

Premium USA Brand Buying Guide - Niton 999 Equipment

Premium USA Brand Buying Guide - Niton 999 Equipment

Premium USA Brand Buying Guide - Niton 999 Equipment

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

issue 1£2.50NITON<strong>999</strong>equipmentpremium usa brandsprofessional BUYING GUIDEthe home of premium productswww.niton<strong>999</strong>.co.ukuk authorised productgroup distributorPLEASE NOTE THAT BATES FOOTWEAR & PEERLESS HANDCUFFS ARE NOT PART OF THE BAE SYSTEMS PRODUCTS GROUP.


• Bianchi’s patented moulded technology and unique trilaminate construction.• 600 denier woven exterior, high-density foam core, and a smooth knit lining.• Belts are web construction with hook or loop lining.• This synthetic woven product line is both lightweight and durable enough for therigours of street duty.8100 Web Duty Belt• Tough nylon web construction• Tri-release shatter-resistant, polymer buckle features for addedsecurity2” (50mm) width. Belts are 2” (50mm) oversized to accommodateliner belt and padding.Code BIA31321 SMALL 28-34” (71-86cm)Code BIA31322 MEDIUM 34-40” (86-102cm)Code BIA31323 LARGE 40- 46” (102-117cm)Code BIA31324 XLARGE 46-52” (117-132cm)Code BIA31325 XXLARGE 52-56” (132-142cm)8110 Duty Belt - Hook Lining• Tough nylon web construction; hook lining• Tri-release shatter-resistant, polymer buckle feature for added security2" (50mm) widthCode BIA31441 SMALL 28-34” (71-86cm)Code BIA31442 MEDIUM 34-40” (86-102 cm)Code BIA31443 LARGE 40-46” (102-117cm)Code BIA31444 XLARGE 46-52” (117-132cm)Code BIA31445 XXLARGE 54-58” (137-147cm)BIANCHI PATROL TEK4t 8006 Belt Keeper• 4-Pack• 1” web for 2” (50mm Belts)Black finished brass snapsCode BIA31304t 8006I Slide-on BeltKeeper• 1” web Slides on to Model 8105 or8106 liner belts 1.5" (38mm)Black finished brass snapsCode BIA31428t 8016 Silent Key Holder• Holds keys securely and silently• Wraparound hook and loop closureWeb Dual Belt loopCode BIA31313The PatrolTek line of law enforcementWhy PatrolTekmoulded accessories featuresBianchi’s patented moulded technology and uniquetrilaminate construction – a 600 denier woven exterior,high-density foam core, and a smooth knit lining. Belts areweb construction with hook or loop lining. This syntheticwoven product line is both lightweight and durableenough for the rigours of street duty. With PatrolTek you’llbe hard pressed to find better value anywhere!t 8029 Phone Holder• Flap with hook and loop closure• Dual web belt loop designDimensions: 3.25 W x 1.38 D x 5.25H.Code BIA31402t 8003 Knife / MAG Pouch• Vertical carry• Fits up to 2.25” (58 mm) belts• Hidden snap closureContoured moulding for long lastingshape and precise fit.Code BIA31345t 8015 Pager/GlovePouch• Hidden snap closureWeb belt loop fitsCode BIA31312Dual Belt Loop8106 Nylon Liner Belt - Loop• Hook and loop closure for quick on/off• Lined with loop• 1.5" (38mm) width to fit up to 2.25" (58mm) dutybeltsCode BIA31339 SMALL 28-34” (71-86cm)Code BIA31340 MEDIUM 34-40” (86-102cm)Code BIA31341 LARGE 40-46” (102-117cm)Code BIA31342 X LARGE 46-52” (117-132cm)Code BIA31343 XXLARGE 52-56” (132-142cm)8105 Nylon Liner Belt - Hook• Hook and loop closure for quick on/off• Lined with hook closure1.5” (38mm) width to fit up to 2.25” (58mm) duty beltsCode BIA31327 SMALL 28-34” (71-86cm)Code BIA31328 MEDIUM 34-40” (86-102cm)Code BIA31329 LARGE 40-46” (102-117cm)Code BIA31330 XLARGE 46-52” (117-132cm)Code BIA31331 XXLARGE 54 -58” (137-147cm)Bianchi offers its most popular dutyaccessories with a uniquely designedbelt loop that allows for snug carryon either a 2” (50mm) duty belt or2.25” (58mm) duty belt. This feature isavailable on both our top end Accumold& Accumold® Elite accessory lines, andon our PatrolTek accessory line.CHECK FOR LATEST PRICES AT WWW.NITON<strong>999</strong>.CO.UK OR CALL 01293 549858


ACCUMOLD®• Ballistic weave moulded trilaminate fabric• Light in weight, weather resistant• Trilaminate construction consists of a ballistic weave fabric with a high-densityclosed cell foam centre, and a smooth Coptex knit lining.• Easy to maintain, looks sleek and professional• More protection and less bulk• Roll-top lid for a smooth, rounded closureErgoTekIt’s all in thepillows…Bianchi's ErgoTek DutyBelts redistribute theweight of the duty gear,away from the edgesof the belt and over itswide closed-cell foamcushioned surface. Foreven more stability andadded holster support,a high density internalpolymer stiffener runsthe full length and widthof belt.You'll notice immediatelythat the ErgoTek belt isboth light in weight andfar more comfortablethan a traditional dutybelt.7225 ErgoTek Cushioned Belt• Ballistic weave five-part laminate• Load support cushions on lining distributes weight of duty belt over entire waist• Ultimate comfort, support and qualityThe Bianchi ErgoTek system is truly a breakthrough in comfort technology. It offerseffective load distribution across the entire surface of the belt, away from the stiff beltedges. Injection moulded belt loop by adding a dense, closed cell foam cushion.2.25” (58mm) width. Accepts standard holsters and pouches. Loop lining for use with7205 belt liner. Tri-release shatter resistant, polymer buckle.Code BIA22406 SIZE 1 30-32” (76-81cm)Code BIA22407 SIZE 2 32-34” (81-86cm)Code BIA22408 SIZE 3 34-36” (86-91cm)Code BIA22409 SIZE 4 36-38” (91-97cm)Code BIA22410 SIZE 5 38-40” (97-102cm)Code BIA22411 SIZE 6 40-42” (102-107cm)Code BIA22412 SIZE 7 42-44” (107-112cm)Code BIA22413 SIZE 8 44-46” (112-117cm)t 6406 Belt Keepers (4)• 4-pack - 1" web• Snap or hook and loop closure• 2.25” (58mm) beltsCode BIA15634 VelcroCode BIA15635 Hiddent 7329 Phone Holder• Dimensions: 3.25 W x 1.38 D x5.25” H• Flap with hook & loop closureDual web belt loop design.Code BIA230977203 Nylon Duty Belt & 1” Lining• Five-part laminate construction• Ballistic weave fabric & 1" hook liningTri-release shatter-resistant, polymer buckle. 2.25”(58mm) width.Code BIA21211 SMALLCode BIA21212 MEDIUMCode BIA21213 LARGECode BIA21214 X LARGECode BIA21215 XX LARGE7200 Nylon Duty Belt• Five-part laminate construction• Ballistic weave fabric outer & loop liningTri-Release shatter-resistant, polymer buckle. 2.25"(58mm) width.Code BIA17380 SMALLCode BIA17381 MEDIUMCode BIA17382 LARGECode BIA17383 X LARGECode BIA19094 XX LARGEBIANCHI ACCUMOLD®6405K Key Holder snap u• Slim, compact 1” webDouble snap closure. Fits up to 58mmbelts.Code BIA234966t 6405 Key Holder• Slim, compact 1” webFits up to 58mm belts.Code BIA144257316 Silent Key Holder u• Holds keys securely and silently• Roll-Top wraparound closureDual web belt loop design and hookand loop closure.Code BIA187667303 Knife Pouch u• Expands for sleek, trim look• Moulded for long lasting shapeDual web belt loop design.Code BIA17427 VelcroCode BIA18201 HiddenChoosing the right size:To find your proper size, try on a pair of trousers that fitwell and measure around the outside of the waistbandat the position where you would wear a belt. Themeasurement is your correct belt size. If your waist size ison the maximum measurement, choose the next size up.WHAT BELT SIZE ARE YOU?SIZE SMALL MEDIUM LARGE X LARGE XXLARGEINCH 28-34 34-40 40-46 46-52 52-58CM 71-86 86-102 102-117 117-132 137-147Specify exact waist size when ordering. The sizebreakdowns are for Bianchi belt only.7201 Nylon Gun Belt - Hook & loop• High-density four-part construction for long-lastingshape and exceptional durabilityHook & loop closure for quick on/off ease. Fits 1.75"(45mm) width.Code BIA17660 SMALLCode BIA17661 MEDIUMCode BIA17662 LARGECode BIA17663 X LARGE7205 Nylon Liner Belt - Hook• Hook & loop closure for quick on/off ease• Lined with hook1.5" (38mm) width to fit up to 2.25" (58mm) duty belt.Code BIA17706 SMALLCode BIA17707Code BIA17708Code BIA17709Code BIA17710MEDIUMLARGEX LARGEXX LARGECHECK FOR LATEST PRICES AT WWW.NITON<strong>999</strong>.CO.UK OR CALL 01293 549858


t 7300 Covered Cuff Case• Hook/loop or hidden snapDual web belt loop design. Moulded forlong lasting shape.Size 1: Standard Chain LinkedCode BIA18190Size 2: ASP 100 HandcuffsCode BIA23013Size 3:ASP 200 HingedCode BIA23817t 7310 Mini-Light Holder• Full flap with exclusive Roll Top lidhelps secure light• Fits Mini-Mag etcDual web belt loop design. Moulded forlong lasting shape.Code BIA17449 VelcroCode BIA18206 Hiddent 7329 AIRWAVE Holder• Dimensions: 3.25 W x 1.38 D x5.25” H• Flap with hook & loop closureFits up to 58mm belts. Dual web beltloop design.Code BIA230977318 UL-1 Cuff Case u• Dual web belt loop designFits Hiatt UL-1 Cuffs. Mouldedfor long lasting shape.Code BIA19211 VelcroCode BIA19212 Hiddent 7317 Double Cuff Case• Dual web belt loop designHolds two pairs of standard handcuffs.Moulded for long lasting shape.Code BIA18772 VelcroCode BIA18771 Hidden7334 Open Cuff Case u• Pull through styleDual web belt loop design. Moulded forlong lasting shape.Code BIA229647311 Light Pouch u• Full flap with exclusive Roll Top lidhelps secure light• Fits: Small: Surefire 6P, StreamlightScorpion, Inova T2 etcDual web belt loop design. Moulded forlong lasting shape.Code BIA18454 VelcroCode BIA18456 Hiddent 6409 Flashlight Ring• Moulded plastic ring locks flashlightin position1” web. Fits up to 58mm belts.Code BIA144166409K Flashlight Ring• Moulded plastic ring locks flashlight inposition1” Web with dual snap closure. Fits up to58mm belts.Code BIA234977323 Adjustable RadioHolder u• Adjustable to fit most radios• Adjustable elastic retaining strapFits up to 58mm belts. Dual web beltloop design.Size 1: MOTOROLA XTS, MTX etcCode BIA22703Size 2: MOTOROLA Saber etcCode BIA22803t 7314 Radio Holder• Inside: 2.75 W x 1.5 D x 7.5” L• Holds most hand-held radiosAdjustable elastic strap with snapclosure. Fits up to 58mm belts. Dualweb belt loop design.MOTOROLA MT500, MT1000 etcCode BIA18520t 7324 compact radios• Inside dimensions: 2.8 W x 1.65 Dx 7.4” LCode BIA19696MOTOROLA MTS2000 etct7313 ExpandableBaton Holder• Dual web belt loop design.Moulded for long lasting shape.Code BIA18453 16-21”Code BIA18452 26”Code BIA19216 Monadnockt 7326 Light Holder• Two sizes fit most 1” Dia Lights• Holds all flashlight lengths1” Web with dual snap closure. Fits upto 58mm belts.Size 1: 6P, 6R, Scorpion, Inova T3Code BIA22837Size 2: Stinger®, Stinger XT etcCode BIA228387314S Radio Holder withSwivel u• Holds most hand-held radios• Adjustable swivel belt mountAdjustable elastic strap with snapclosure. Fits up to 58mm belts.Code BIA18521MOTOROLA MT500, MT1000 etc7312 Expandable BatonHolder u• Covered hole in back of pouchallows baton to be placed in pouchfully expanded.Dual web belt loop design. Moulded forlong lasting shape.Code BIA20416 16-21”Code BIA20417 26”Code BIA20418 Monadnockt 7333 IWB Baton Holder• Inside Waistband (IWB)• Open top design. Dual web beltloop design.Code BIA23309 Mon 16”Bianchi offers itsDual Belt Loop most popular dutyaccessories with a uniquely designed belt loopthat allowsfor snug carryon either a 2”(50mm) dutybelt or 2.25”(58mm) dutybelt.EASY WAYS TO ORDER(6404 Baton Ring u• For standard and side-handle batons1” Web with dual snap closure. Fits upto 58mm belts.Code BIA14414t 7328 Flat Glove Pouch• Holds two pairs of latex gloves• Hook & loop closureFits up to 58mm belts. Dual web beltloop design.Code BIA229607315 Glove Pouch u• Most compact pagers or 2 pair oflatex glovesFits up to 58mm belts. Dual web beltloop design.Code BIA18480 VelcroCode BIA18481 Hidden01293 5498588ARS Radio SwivelAttachment u• Swivel adapter for 7314S and 7324SRadio Holders only2.25" (58mm) belt loopCode BIA19114WWW.NITON<strong>999</strong>.CO.UKt 7307 OC/Mace® Pouch• Full flap with RollTop lid helpssecure canisterDual web belt loop design. Fits up to58mm belts.Large: Defence Technology® MK-4Code BIA17445 VelcroCode BIA18204 HiddenSmall: Defence Technology® MK-3and similar canisters (5.5)Code BIA17446 VelcroCode BIA18205 Hidden7308 Open Top OC/Mace®Pouch u• Open top convenience & quickaccessDual web belt loop design. Fits up to58mm belts.Code BIA231287BIANCHI ACCUMOLD®


Auto Retention provides positive mechanical retention whenthe weapon is properly holstered. Bianchi's ThumbLok andFingerLok retention devices provide a new level of securityAuto Retentionby automatically engaging the trigger guard of the pistolduring the reholstering. This is accomplished through a patented locking lever that is strong,simple, and reliable. The lever is spring loaded and remains engaged until deactivated throughthe natural positioning of the thumb or finger during the draw. The result is a smooth andefficient draw stroke that does not require any unnatural movements.BIANCHI AUTO RETENTION7125 Accumold® Enforcer® SLR• Coptex inner lining for smooth draw• Closed muzzle• Reinforced 2.25" (58mm) jacket slot beltloop, curved for comfort• Locking strip on inside of belt loop securesholster to Bianchi Model 7200 Duty BeltThe Enforcer features our SlideLok Retention(SLR) mechanism that provides a positivelock in the snap of the thumb break. Enhancedweapon security. Further, the internal Pinch®Retention Device enhances security byproviding additional tension on the triggerguard. Bianchi Sight Channel and jacket slotbelt loop.PATENTEDGlock 17,22 Size 13Code BIA19200 Right HandCode BIA19201 Left HandSig P220R, P226 Size 13ARCode BIA19202 Right HandCode BIA19203 Left HandAuto Retention.A New Concept For ANew World!7500 Accumold® PaddleHolster• Easy on/off convenience• Paddle design for virtually limitlessrange of cant, both strongside & cross drawcarry• Adjustable for most carry heights on the waist/hip• Closed muzzleOffering a wide range of adjustability forcant and draw height, this design allowsyou to position the holster where it’s mostcomfortable and accessible. It keeps theholster and firearm close to the body and thenon-slip diamond-cut neoprene lining providesexceptional stability without sacrificing comfort.Size 13 : GLOCK 17, 20, 21, 22 &SIGARMS P220, P220R, P226, P226R,P245, SP2009, SP2340Code BIA18838 Right HandCode BIA18839 Left HandFingerLokThe FingerLok is our latestdevice to employ the AutoRetention feature. The release lever is positionedbehind the trigger guard enabling the user tosweep it with the middle finger as a natural part ofthe draw. Many officers like this concept because itallows them to use the same muscle memory whendrawing from either a Bianchi duty or concealmentholster.87140 Accumold® DutyLok• Auto Retentionautomatically securesfirearm• FingerLok retention device• Injection moulded belt loop with ErgoTek• User adjustable Tension BarsThe DutyLok is the next generation, multiretentionduty holster with our exclusive AutoRetention concept. It provides an easy to use,smooth, single plane drawing platform, andoffers excellent retention capabilities. Bianchi’sKnuckleBreak thumb snap is released witha straight downward stroke of the thumbwhile the middle finger indexes on the releaselever. The draw stroke is an efficient upwardmovement. Fits belts up to 2.25” (58mm).Glock 17,22 Size 13Code BIA23042 Right HandCode BIA23043 Left HandCode BIA23598 Right Hand Low RideCode BIA23599 Left Hand Low RideSig P220R, P226R Size 13ARCode BIA23048 Right HandCode BIA23049 Left HandCode BIA23600 Right Hand Low RideCode BIA23601 Left Hand Low Ride7001 Accumold® Thumbsnap• Custom moulded and contoured• High-density trilaminate construction• Coptex inner lining for a smooth draw• Sturdy Quick-Slide moulded belt loop• High ride & Closed muzzleSuitable for outdoor and concealment applications,this holster rides at a 10 -13 degree forward anglefor a fast, instinctive draw. Our Roll-Top thumbbreak strap wraps cleanly over hammer andeffectively retains the handgun. Belt slides throughour Quick-Slide 1.75” injection moulded belt loop.Size 13: GLOCK 17, 20, 21, 22 & SIGARMSP220, P220R, P226, SP2009, SP2340Code BIA17721 Right HandCode BIA17722 Left Hand4584 Evader Holster• Auto Retention with FingerLok internal retention automatically secures handgun• Reinforced open-top design stays open forefficient one-handed reholstering• Dual snap belt loop fits 1.75" (45mm) belt• Low profile design for high-level concealmentDurable trilaminate with a hard-wearing ballisticweave fabric finish, this holster is rugged enoughto take on any situation. The closed-cell foamcentre provides excellent fit and cushioning for thefirearm and the inner lining is a slick woven nylonfor a smooth draw. Auto Retention, featuringBianchi’s exclusive FingerLok retention device.GLOCK 17/22, 20/21, 19/23, 26, 36, 37, 39Size 13Code BIA23892 Right HandCode BIA23893 Left HandKnuckleBreakContoured KnuckleBreak provides a largetarget area for the thumb break, which can bea real advantage when having to draw under pressure. Its unique designalso aids in a more rapid draw. A straightdownward, one-step motion of the thumbon its way to a firing grip position releasesthe break. For those with shorter thumbs,bending the thumb creates an even largerprofile for a more positive break.CHECK FOR LATEST PRICES AT WWW.NITON<strong>999</strong>.CO.UK OR CALL 01293 549858


7303 Single Mag Pouch u• Pouch cavity expands for a sleek, trim look• Moulded for long lasting shape and precise fitDual web belt loop design.Glock 17, 19, 22, 23 & Sig P226/P226R*, P228,P229/P229R*, P2022, SP2009, SP2340Code BIA17427 VelcroCode BIA18201 Hiddent 7301 Speedloader Pouch• Fits medium frame loaders (two .38/.357)• Hook/loop or hidden snap closureDual web belt loop design.Code BIA17400 VelcroCode BIA18192 Hidden7302 Double Mag Pouch u• Vertical or horizontal carry• Pouch cavities expand both front and rear• Moulded for lasting shape & precise fitInjection molded belt loop fits 2.25" (58mm)Glock 17, 19, 22, 23 & Sig P226/P226R*, P228,P229/P229R*, P2022, SP2009, SP2340Code BIA18442 VelcroCode BIA18472 Hidden82 CarryLok• Dual belt slots pull gun closeto body for concealability• FingerLok for speed &security• 16° forward carry angle• Open muzzle• Fits up to 1.75” (45mm) belt widthsThe CarryLok offers the speed of an open top concealment holster with the securityof Bianchi's Auto Retention concept. The FingerLok internal retention mechanismsecures the pistol by the trigger guard as it is inserted into the holster. To draw, themiddle finger sweeps the release lever allowing the pistol to be drawn in an upwardmovement.GLOCK 17, 22 Size 13Code BIA22148 Right HandCode 22149 Left HandSIGARMS P220/P220R*, P226/P226R* Size 13ACode BIA22160 Right HandCode BIA22161 Left Hand7506 Accumold® Belt Slide• AccuMold® trilaminate construction• Coptex lining provides a smooth draw• Allows thumb break and front strap opening• Adjust-A-Strap feature permits adjustment for different handguns• Snaps/slides on 1.75" (45mm) belts• Removable thumbstrapThis featherlight slide holster snugs up to yourbody, close and comfortable. Firm action snapson the two belt straps allow quick release withoutremoving the belt. Thumb break release offersquick, easy access. Open muzzle.GLOCK 17, 19, 22, 23, 26, 27, 34, 35 & Sig220R = Size14ACode BIA17862 Right handCode BIA17863 Left HandSIGARMS P220, P225, P226, P229, P239,P245, P2022, SP2009, SP2340 = Size 15ACode BIA17864 Right HandCode BIA17865 Left HandThumbLokThe thumb, as the nameimplies, deactivatesthe Bianchi ThumbLok on the way to a firinggrip position. This cam device is easy to useand offers an instinctive straight up draw. Thehidden release lever is unobtrusively locatedbetween the holster and jacket slot belt loop.Holsters with this device feature our exclusiveAuto Retention feature; ideal for duty use.EASY WAYS TO ORDER(01293 5498588003 Single Mag pouch u• Vertical carry• Hidden snap closureMoulded for long lasting shape and precise fit. Belt loopfits 2” (50 mm) - 2.25” (58 mm) width duty belts.Glock 17, 19, 22, 23 & Sig P226/P226R*, P228,P229/P229R*, P2022, SP2009, SP2340Code BIA313458020 Triple Threat II Mag Pouch u• Horizontal or vertical carry 2.25” (58mm) belt• Coptex inner lining for smooth drawAdjustable tension screw. Custom moulded & contoured.Glock 17, 19, 22, 23 & Sig P226/P226R*, P228,P229/P229R*, P2022, SP2009, SP2340Code BIA31396Slide•Lok8t 7320 Triple Threat II Mag Pouch• Custom moulded & contoured• Horizontal or vertical carry• Coptex inner lining: for smooth drawAdjustable tension screw, fits 2.25" (58mm) belts width.Glock 17, 19, 22, 23 & Sig P226/P226R*, P228,P229/P229R*, P2022, SP2009, SP2340Code BIA18797• Patented moulded technology and unique trilaminateconstruction• 600 denier woven exterior, high-density foam core, anda smooth knit lining.• This synthetic woven product line is both lightweightand durable enough for the rigours of street duty.t 8002 Double Mag Pouch• Horizontal or vertical carry 2.25” (58mm) belt• Pouch cavities expand both front and rearMoulded for long lasting shape and precise fit. Hiddensnap closure.Glock 17, 19, 22, 23 & Sig P226/P226R*, P228,P229/P229R*, P2022, SP2009, SP2340Code BIA31302Constructed of high-strengthpolymers, the Slide•Lok isvirtually unaffected by adverse weather conditions.Push forward to disengage, backward to engageretention mechanism. Provides visual and tactile feedbackon position and movement of the mechanism.Extended flange and internal components combineto help prevent unintentional disengagement of thethumb snap.WWW.NITON<strong>999</strong>.CO.UK9BIANCHI AUTO RETENTION


4601 Ranger Viper• Trilaminate construction• Ambidextrous design• Offside ammo pouch included• Hidden belt tie down• Spring front opening for quick draw• Fits up to a 48” chestThis vertical carry, ballistic weave fabric shoulder holsteris fully spring-loaded to hold the pistol or revolversecurely, yet allows for a fast, smooth draw through thefront. The adjustable retainer strap attaches firmly ona wide reinforced hook and loop panel. The open chestharness is easily adjusted while you wear it, and theflexible back pivot system allows the harness to flex asyou move.Size 05 GLOCK 17, 19, 20, 21, 22, 23, 26 &SIGARMS P220/P220R, P225, P226/P226R, P228,P229/P229R, P2022Code BIA14315BIANCHI INTERNATIONAL4750 Ranger Triad Ankle Holster• Contouring centre compression strap firmly snugs holster close to leg• Adjustable ankle-pad cushion custom fits to ankle bone• Ankle-pad cushion is removable for easy cleaning and airing• Tri-strap design for adjustability to fit virtually any ankle securely• Elasticised retention strap with easy pull tab for quick, easy accessThree unique features :1. The back of the holster has an Achilles arch that helps keep the holster in position onthe ankle.2. The detachable ankle pad can be positioned for maximum comfort no matter whatsize ankle you have.3. The compression strap designed to pull the butt of the gun in tight against the calffor a low profile and to keep the weapon securely against the leg during vigorousactivity.13/14 GLOCK 17, 19, 22, 23, 26, 27, 29, 30, 36. SIGARMS P220, P220R,P225, P226, P226R, P228, P229, P239, P2022, SP2009, SP2340Code BIA19752 Right HandCode BIA19753 Left Hand4751 Triad Leg Extender• Nylon web extension piece that allows for use of 4750 TriadAnkle Holster with boots and larger calves2 per package.Code BIA22822104755 Ranger Baton Ankle Holster• Ergonomic design for security, comfort and fit• Centre compression strap firmly snugs baton close toleg• Adjustable ankle-pad custom fits to ankle boneAnkle-pad cushion is removable for easy cleaning.Innovative strap design offers adjustability to fit virtuallyany ankle securely and comfortably. Retention strap hasan easy pull tab for quick, easy access to baton.Fits: ASP Expandable Baton 21”, Monadnock AutoLockExpandable Baton w/ Safety Tip Foam Grip 16”Code BIA23828 Right HandCode BIA23829FULL LINE BROCHUREAVAILABLE TO ORDERLeft Hand4620 Tuxedo® Shoulder Holster• Closed-cell foam centre cushion for protection• Soft, suede-like lining• Ambidextrous• One size (up to 48” chest)• Includes magazine pouch & 2 Tie Down Accessory strapsThe horizontal shoulder holster system is lightweight and comfortable enough to wearall day. It offers lightning-fast access; it’s ambidextrous and swiftly adjustable to fitmost torsos. The holster is lined with a soft suede-like material for protection of thefirearm. Comes complete with holster, X-harness, two tie-down straps and a doublemag pouch or speedloader panel. Bianchi’s trilaminate construction provides paddedprotection of the firearm.Size 05 GLOCK 17, 19, 22, 23, 36 & SIGARMS P220/P220R, P225, P226/P226R, P228, P229, P239Code BIA17034 Ambidextrous4620A Double Magazine Pouch• Slimline design holds two magazines• 420 denier pack cloth• Hook and loop closureSize 03 GLOCK 17, 19, 20, 21, 22, 23Code BIA17056Size 02 SIGARMS P220/P220R*, P225, P226/P226R*, P229/P229R*, P239, P2022Code BIA170404620T Tie-Down Accessory• Switch to the Offside Accessory Panel to hold cuffs,clips and speedloaders.Secures the holster or offside pouch to your belt for extrastability. Nylon web.Code BIA17042150 Negotiator Ankle Holster• Neoprene leg strap expands to fit leg comfortably• Lined with genuine sheepskin for comfort and concealability• 2" adjustable elastic leg strap secures and keeps holster in place• Holster is canted for ease of draw• Hard action snaps for extra stabilityIt’s back to basics with our new full grain leather ankle holster. Features genuinesheepskin lining on the neoprene leg wrap for comfort and breathability, and adouble wrap hook and loop closure for security. Two-inch elastic calf strap withdetachable hook and loop attachment strap.Size12 GLOCK 26, 27Code BIA24010 Right HandCode BIA24011 Left HandCHECK FOR LATEST PRICES AT WWW.NITON<strong>999</strong>.CO.UK OR CALL 01293 549858


X16A• Double snaps to fitvarious magazinesSize 04 GLOCK 17, 19,20, 21, 22, 23Code BIA17166Size 02 SIGARMS P226,P228, P229Code BIA17164Front flap pulls down to reveal built-inneoprene holder inside the 4411. Zipperedcompartment on outside for incidentals.X16 Agent® X Shoulder System• Complete with a choice of either contour-moldedmagazine pouch or a low-profile speedloader panel• <strong>Premium</strong>, full grain Tan cowhide holster• Featherweight, slimline design• Silicone-suede X-style harness is flexible, strong &contours to the torso• Fits chests up to 48”• Includes 2 suede leather tie downs to secure holsterand offside pouch to beltA comfortable shoulder holster that carries the pistol orrevolver in a horizontal position. The holster is craftedfrom premium leather and is hand boned for a precisefit. The figure-8 suede harness provides a balanced carrywithout binding. Offside accessories include pouches formagazines and speedloaders. Both holster and accessorypouches can be anchored to the belt using tie-downpanels.Size 10: GLOCK 17, 19, 22, 23Code BIA17254 Right HandCode BIA17255 Left HandSize 04: SIGARMS P220, P226Code BIA17246 Right HandCode BIA17247 Left HandEASY WAYS TO ORDERX16R• Low profile two slimlinespeedloaders attached topanelSpeedloaders can be wornindividually on a 1.75" belt.Code BIA17226X16RS• Holds a single mediumframe speedloaderSnaps around a 1.75"(45mm) width belt.Code BIA17232X16P Offside• Carries cuffs, clips orloadersCode BIA17224X16T – Tie Down• Secures the holster oroffside pouchOffers extra stability.Code BIA17228X15 Shoulder Holster• Dual spring closure provides firearm retention andstability• Leather lined• Detachable retainer strap• Fully adjustable soft leather harness• Harness adjusts to 48” chestThe X15® shoulder holster is one that has set thestandard for over 30 years. It is a vertical carry designwith a wide harness that supports the weight evenlyon the strong shoulder. The dual spring design andsecondary retention strap ensure weapon securitywithout sacrificing speed. Comfortable, secure, andproven are the traits that have made the X15 the choiceof professionals throughout the world.Size 03: GLOCK 17, 19, 20, 21, 22, 23 &SIGARMS P220, P220R, P226, P226R, P229,P229R, SP2009, SP2340Code BIA22208 Right HandCode BIA22209 Left Hand(01293 5498584411 K.O. 2000• Foam stiffener on front pocket eliminates "printing" of contents• Sewn web strip on sides for attachment of cell phone, pager, etc.• Flip out web badge holder in front slash pocket• Handgun fits snugly in form-fitting neoprene slot in rear of main compartment• Polyethylene back plate provides firm support of firearmQuick-action, diagonal pull nylon rip cord for swift access to firearm. Gusseted frontzippered compartment. 420 denier nylon pack cloth with 2" (50mm) web belt.The K.O. 2000 features a sturdy polyethylene backplate with a neoprene slot forsecurely holding your handgun. A diagonal pull on the nylon ripcord and the frontof the pack drops down, affording efficient gun access and a quick, smooth draw. Azippered front pocket holds incidentals, while web loops accommodate clip-on items.Features a web badge holder and sturdy foam padding on the front and side wings.Size 1 - Small Autos and Revolvers up to 2.5"Code BIA197__ Right (30) or Left (31)Size 2 - Medium, Med./Lrg. Revolvers up to 2" - 2.5"Code BIA197__ Right (32) or Left (33)Size 3 - Medium Autos up to 4"Code BIA197__ Right (34) or Left (35)Size 4 - Medium, Med./Lrg. Revolvers up to 4"Code BIA197__ Right (36) or Left (37)Size 5 - Large Autos up to 5"Code BIA197__ Right (38) or Left (39)4410 Top Secret II• Foam stiffener on front pocket eliminates "printing" of contents• Sewn web strip on sides for attachment of cell phone, pager, etc.• Hidden compartment on back of pack conceals handgun and valuables with hookand loop closure• Roomy zippered main compartment and front slash pocket• 500 denier Cordura® nylon with 2" (50mm) web belt; buckle concealed for addedsecurityThe Top Secret allows easy access to pack contents without exposing your firearm.That’s because it’s hidden behind the main compartment in a concealed pocket. Theambidextrous design gives you instant access to your firearm by pulling open the rightor left side hoop and loop concealment flaps. Front and side are lined with dense foamfor a clean look. The concealed buckle helps prevent the pack from being snatched.Web loops conveniently hold clip-on items.Size 1 - Small Autos and Revolvers up to 2.5”Code BIA19710Size 2 - Medium Autos and Revolvers up to 4”Code BIA19711Size 3 - Large Autos and Revolvers up to 5”Code BIA197128WWW.NITON<strong>999</strong>.CO.UK11BIANCHI INTERNATIONAL


UM92 Universal Military Holster withTrigger Shield• Same design & construction features of the UM84• Designed for today’s large frame autos• Trigger guard shield protects and stabilizes the triggerguard• Compatible with all UM84 accessories• Fits up to 2.25” (58mm) beltThe UM92 incorporates the time proven design featuresand versatility of the M12/UM84 with the addition of apolymer trigger guard insert. This shield stabilizes thepistol by providing a solid anchor for the trigger guard tointerface with. The UM92 is offered in two sizes (UM92I,UM92II) and is ideal for Glock and Sig Sauer weapons.Most Large Frame 5” Single Action and DoubleAction Semi autos. SIGARMS P210, P220, P220R,P226, P226RCode BIA14219T6521 Double AR15• Two 30 round AR15 type mags• Quick-Lock belt clipDual hook/loop and snap closure.Rugged ballistic trilaminate construction.Code BIA19942T6500 Tac Holster LT• Adjustable fits most pistol mounted lights• Quick-Lock clip for attachment to T6510 AccessoryPanel any MOLLE system or on belt up to 2.25” (58mm)width• Rugged Ranger trilaminate construction• Does not include mil-spec cleaning rodMeets the needs of the tactical operators who utilize alight mounted to their weapon. The holster is adjustableto fit most pistol mounted tactical lights. It mounts toour Modular Accessory Panel becoming an integral partof our Cobra Tactical System. The thumb break has asecondary security strap for additional retention duringhigh stress activities.Size 01 GLOCK 17, 22Code BIA19960 Right HandCode BIA19961 Left HandSize 02 SIGARMS P220R, P226R, P2022Code BIA19958 Right HandCode BIA19959 Left HandT6505 Tac Holster• Quick-Lock clip for attachment to T6510 AccessoryPanel any MOLLE system or on belt up to 2.25" (58mm)width• Rugged Ranger trilaminate construction• Ambidextrous designDoes not include mil-spec cleaning rod. Constructed fromdurable trilaminate. Features polymer trigger guardshield that protects & stabilises the trigger guard forimproved firearm retention of semi auto models.Size 02 GLOCK 17, 20, 21, 22 & SIGARMS P220,P220R, P226, P226R, P229RCode BIA19967BIANCHI MILITARYM1025 Military Mag Pouch• Quick-Lock belt fastener• Holds two magazines• Fits up to 2.25" (58mm) beltSize 03 GLOCK 17, 19, 22, 23Code BIA17645Size 01 SIGARMS P220, P225Code BIA14928Quick-LockEasy Attach & RemoveStandard on our UMmilitary holsters, ourexclusive Quick-Lock belt clip hasperformed flawlesslyfor U.S. Armed Forces for almost two decades.Bianchi’s Cobra® gear features this attachmentsystem, so changing your equipment mix can bedone in seconds, to quickly adapt to the needs ofany given situation. No tools required.12M1425 Tactical Hip Extender• High mounted leg strap• Upper attachment point for accessories• Quick-Lock belt fastener• Fits up to 2.25" (58mm) beltCreated for demanding requirements of U.S. SpecialWarfare groups, this extender offers a rigid platform andincorporates an upper attachment point for accessoriessuch as the M1025 magazine pouch (shown) or a largecombat or survival knife.One Size for M12, UM84, UM92Code BIA15140T6510 Modular Accessory Panel• Five attachment points to mount accessories (two arebi-directional)• Adjustable ambidextrous leg strap with a 2” QuickRelease buckle Adjustable heavy duty webbing belthanger (For optimum results, use with Bianchi Model7200 Belt)• Vertical adjustment to custom-tailored panel locationon thighNon-slip backing keeps panel securely in place. Webattachment points Bianchi Military holsters with Quick-Lock. Modular Accessory Panel offers security andadjustability. Pouches and holsters mount on the multipleweb attachment points and the non-slip backing meansthe panel stays put during extreme use. The thigh strapis also vertically adjustable and features a Fastex buckleand high-strength elastic insert for flexibility and comfort.All pouches attach to the panel via our Quick-Lock beltclip.Code BIA22417CHECK FOR LATEST PRICES AT WWW.NITON<strong>999</strong>.CO.UK OR CALL 01293 549858


Redefining The State Of The Art...At Hatch®, we consider the men and women of law enforcement and the military our partners in creating—and continually redefining—the state of the art.Our products are developed only after working closely with those who will use them in the mostdemanding applications possible. We’re proud that this rewarding partnership has made Hatch theunchallenged leader. Hatch is home to the most experienced research-and-development team in theindustry, and we combine our years of experience with the latest materials and techniques.The result: truly engineered products that keep you more comfortable and protect you more effectively. AtHatch, that’s what we do. And nobody does it better.Street Guard MK4• Reinforced on first two fingers for extra protectionduring searches• Silicone moulded plastic for knuckle and lateral fingerprotection• Stretch woven fabric back• Extreme-Grip non-skid material for enhancedweapon control• Absorbent terry cloth thumbs for sweat removalWith a Dyneema® liner, the Street Guard MK4 providesthe ultimate combination of superior cut protection andgreat dexterity for a frisk and search glove. Featuringsuper-durable goatskin leather, this glove has a greatcombination of duty glove dexterity with maximum cutprotection.Sizes: XS-2XLCode HAMK4100HK9100 Handler• Patented Cut-Ring stitching• High density foam for finger protection• Exclusive lateral finger protection• Neoprene back• Absorbent terry cloth thumbs for sweatremoval• Sure-Grip patches sewn on bias helpsprevent wear• Hook & loop closureDesigned especially for managing canineswhile on duty. Also ideal for equestrian use.Made of durable and highly abrasion resistantgoatskin, it features extra leash-strap protectionon the palm. The glove fits snugly, allowing sufficientdexterity for frisking, searching and weapon control.Sizes: XS-2XLCode HAHK9100NS430 Specialist All-weatherShooting Duty GloveUnnatural Pullstendons & skin; takesmore energy for user tokeep hands extendedErgo-CutEASY WAYS TO ORDERA Hatch signature ergonomic cut conformsto the natural curvature of the hand allowing you toremain relaxed without fighting the glove.(Natural Gloves with Ergo-Cut allow thehand to remain in a naturally relaxed positionallowing user to expend less energy and putsless strain on tendons & skin01293 5498588• Constructed of neoprene for comfort, flexibility andwarmth• Palms made of Synsi-feel synthetic leather forexcellent grip and accurate feel• Extreme-grip sewn onto palms and fingertips formaximum grip• Hook & loop closures keep gloves firmly in placeIdeal for all-weather handgun use and all day wear.The snug, comfortable fit has made them a favouritechoice of law enforcement professionals.Sizes: XS-2XLCode HANS430Cut-RingPatented Cut-Ring allowsoptional removal of the index finger for triggercontrol without unravelling the remaining edge.WWW.NITON<strong>999</strong>.CO.UK13HATCH GLOVES


CUT RESISTANTARMORTIPPUNCTURE RESISTANT TIPSSGX11 Street Guard• Features exclusive X11 liner unparalleledcut protection, preventing injuries from knives,razors and various other sharp objectsDigitized synthetic leather palms with Extreme-Grip non-slip cradle. 1.5mm neoprene andnylon Spandex laminated back allows aircirculation for maximum comfort while providing aproper, snug fit. Hook and loop closure.Sizes: S-XXLCode HASGX11PPG1 ArmorTip• Palm is covered in Chamude synthetic leather• ArmorTip protects the leading edges of the finger tips, sides of the index andsmall fingers• Neoprene and Spandex laminated back with hook and loop closure flexes andbreathes to provide maximum comfort and proper fitThe best cut resistant X11 liner provides cut and puncture protection where 80-90% of needle stick injuries occur, while keeping the much needed flexibility formaximum performance.Sizes S-XXLCode HAPPG1SGK100 Street Guard• 9-oz. 100% KEVLAR® interlock knit liner formoderate cut resistanceDigitized synthetic leather palms with Extreme-Grip non-slip cradles. Neoprene and nylonSpandex laminated fabric back allows aircirculation for maximum comfort and a proper,snug fit. Hook and loop closure.Sizes: XS-XXLCode HASGK100FM3500 Friskmaster Max• Features Powershield X3 liner comprisedof Honeywell Spectra®, fiberglass andpolyester providing greater cut resistancethan 100% Honeywell Spectra® of thesame weightConstructed of premium cowhide leatherwith a water and fade resistant treatment.Wrist length elasticised cuffs.Sizes: XS-XXLCode HAFM3500SB8500 Friskmaster Supermax• <strong>Premium</strong> leather construction• Leather is water and fade-resistant• Dyneema® liner for ultimate in cutprotection, comfort and dexterityElasticised, extended cut. Dyneema® liner -Offering unparalleled cut protection to preventinjuries from knives, razors and other sharpobjects. Dyneema offers twice the protectionrequired for the highest class in the EN 388 teststandard.Sizes XS-XXLCode HASB8500HATCH GLOVESonly hatch subjects its gloves to “torture tests”Hatch test each and every one of their gloves five separate times before they leave the production line. But for them, eventhat is not enough. Their many years of design and fabrication experience give them the confidence to put their glovesto the toughest independent tests in the industry. Only Hatch subjects its gloves to this extensive range of “torture” teststo assure they are, without question, thevery best products of their kind in the world.The end results of their extensive research,design, fabrication and testing are theproducts that allow you to perform with totalconfidence and precision every time you weara Hatch product.CE: The European equivalent of the NIJperforms the EN 388 test for puncture,cut, tear and abrasion resistance, issuingratings from one to five, with five being the mostresistant.NIJ: The respected National Instituteof Justice tests our gloves for punctureresistance under their rigorous protocols.14MODEL Description NIJ Testing Abrasion Cut Tear Puncture Tested to LABELFM3500 FRISKMASTER Max w/X3® PowershieldMK4100 STREET GUARD MK4High Dexterity,3.8 High CutPPG1 ARMORTIP Puncture High Dexterity1.94 Mod CutSB8500 FRISKMASTERSupermax w/Dyneema®SGK100 STREET GUARD w/KEVLAR®SGX11 STREET GUARD w/X11Mod. Dexterity,2.60 Mod. CutLow. Dexterity,6.92 High Cut3 4 4 2 EN388:19943 5 4 2 EN388:20041 3 3 2 EN388:19942 4 4 3 EN388:2004EN 388 certification: The European Committee for Standardisation (CEN) developed the CE EN388 standards for all protective gloves used in law enforcement and military applications. EN 388rigorously tests protective gloves with regards to physical and mechanical aggression caused byabrasion, blade cut, puncture, tear, impact cut and dexterity.CHECK FOR LATEST PRICES AT WWW.NITON<strong>999</strong>.CO.UK OR CALL 01293 5498583442354213322443


LR10 Reactor 3/4 Finger• Thick foam padding on the back is ergonomically split for dexterity• 0.8-0.9mm thick cowhide leather construction• Additional layer of leather in the palms, provides added protection during rapidrappels, and unpadded index fingers allow maximum trigger controlDesigned for use in tactical operations, these Reactor Gloves are rappelling, tacticalentry and shooting gloves. Excellent for disturbance control operations.Hook and loop wrist closures ensure a snug, comfortable fit. Allows for maximumcontrol and sensitivity when the full-finger version is not required.Sizes: S-XXLCode HALR10NS430P Duty Glove with Neoprene• Exceptionally comfortable and flexible gloves for all-weather use• Neoprene backing traps heat and blocks out moisture, protecting your hands fromthe elements just like a wetsuitSynthetic leather palms and non-slip rubber patches on the tip of the index fingersprovide excellent grip and accurate feel, even in wet conditionsHook and loop closures keep glove comfortably and firmly in placeSizes: XS-XXLCode NS430PDNR100 DayNite Reflective• Black Lycra® with patches of Reflexite®Yellow-Green reflective patch on back fordirecting traffic onward allows the wearerto be seen by motorists up to 600 feet. RedReflective STOP signal on palm for directingtraffic. Stretchable Lycra® allows gloves to beworn alone or over virtually any other glovesSizes: S/M-L/XXLCode DNR100EWS530 Elite Winter Specialist®• 100% nylon back with goatskin palm for durabilityand dexterity• Thermolite lining for warmth; wicking actionpulls perspiration from hand, prevent heat lossSpandex wrist cuff for a snug fit. Adjustable hook &loop closure. Extreme-Grip non-skid material forenhanced weapon control.Sizes: S-XXLCode HAEWS530ThinsulateINSULATIONRTG100 reflective traffic gloves• Fluorescent 100% cotton jersey fabric• 3M® reflective strips3M around the circumference shine back atoncoming traffic allowing others to read yourhand signals clearly. Cotton elastic rib trimmaintains shape.Colour Orange or Green. Sizes: S-XXLCode HARTG100ORANGEGREENNS430L Winter Specialist®• All-Weather Shooting Glove designed for cold,wet, winter weather.• Synsi-feel synthetic leather palms provideexcellent grip and accurate feel.Extreme-Grip sewn onto the palms and fingertips,(except the index finger) for optimum grip andtrigger control. Dual inner linings of Thinsulateinsulation and breathable, waterproof Hipora®work together to keep hands warm and dry. Hookand loop closure.Sizes S-XXLCode HANS430LThinsulateINSULATIONWG1000S PARADE GLOVES• White Cotton Parade GloveConstructed of 100% medium weight cotton fabric.Snap cuff. Decorative tucks for a cleaner fit.Size S-XLCode HAWG1000SARMORTIPPUNCTURE RESISTANT TIPSThis added measure ofprotection on our PPG1 glovesis typical of the extra lengths.Hatch goes to in providing theultimate in protection.EASY WAYS TO ORDER(01293 549858RDP55 Super Dot• These gloves provide warmth and asuperb grip in all weather conditions.PVC dots cover palm area for great grip.Tight, elasticised cuff keeps out windSizes S-XXLCode HARDP55X11 liner: It sets a new standardin cut protection for our cutresistantgloves. Tested to 11 lbf.under NIJ test protocol.8WWW.NITON<strong>999</strong>.CO.UKPowershieldX3® liner: Acombinationfabric thatprovides 10times the cutresistance of100% Honeywell®Spectra® of the same weight.15HATCH GLOVES


This protective piece is a must forCenturionriot control and cell extractions,effectively protecting the torso andshoulders from blunt force trauma. The lightweight, cellular paddesign provides ample protection and allows excellent mobility.Sizes Measured by chest sizeM: 38 - 42" (96.5 -107 cm)L: 42 - 46" (107-117 cm)XL: 46 - 52" (117-132 cm)XXL: 52 - 56" (132-142 cm)XXXL: 56"+ (142 cm+)CPX2500 CenturionUpper Body and Shoulder Protection• Torso protection consists of durable EVA foam with 7mm sponge foam on theinterior for comfort• Shoulder pads feature hard-shell plastic plates with durable foam padding• The neck roll consists of 40mm high-density sponge foam• All padding is encased in black polyester mesh rigging. The interior iscoated with polyester brushed tricot for comfortAdjustable shoulder straps, waist straps and contoured design allow asecure fit comfortable enough for long-term wear. Will safely absorb blowsdelivered from blunt objects, but does not provide ballistic protection.Adjustable hook and loop closures and fasteners. Weighs approximately2 lbs. (.9 kg) and packaged in a nylon drawstring bag for convenientstorage. Reflective labels are available that can be affixed to thefront or rear of the system. Includes attachment points for ourHUEX100 Hydration Reservoir.Code CPX2500TPX200 Centurion Thigh/GroinProtector• Designed to complement the Centurion Upper BodyChest and Shoulder Protection System, this systemwas specifically designed for blunt trauma protectionduring riot control situations. It protects the thigh areaand has an adjustable and removable groin protector.Multi-layer protective design with 420 denier outerfabric covers hip and thigh area. Provides excellentshock absorbing protection, and is flexible andcomfortable. Four inch elastic with hook and loop wrapsaround thigh for secure attachment and a web beltsecures the system to the waist.Sizes S/M, L/XL or XXL/XXXLCode TPX200FP100 Centurion ForearmProtectors• An essential part of our Centurion Riot Gear, theFP100 Centurion Forearm Protectors are designed towork with the CPX2500 (or CPX2000) by shielding theentire forearm from the wrist to the elbow (where theCPX shoulder pads end) from blunt force trauma.Construction consists of durable EVA foam covered byhard shell plastic plates encased in black nylon rigging.Interior is coated with polyester brushed tricot forcomfort. Adjustable 2" wide (5.1 cm) elastic straps withhook and loop fasteners provide a secure fit. Sold inpairs and weigh approximately 6 ounces each.Code FP100HATCH PROTECTIONFULL LINE BROCHUREAVAILABLE TO ORDER16Huex100 Hydration Reservoir andCarrier• High quality, odourless bladder by Nalgene®• 70 oz. Capacity• Features the Bite Me revolutionary flow controlvalve for 360º activation and leak-free operation.Woven fabric carrier of 600 denier polyester withattachment pointsOur CPX2500 and ECB100 Disturbance Control Systemsare outfitted to accommodate our own hydration system.Code HUEX100GP300 Centurion Groin Protector• For additional protection, the GP300 fastens easilyto the CPX2500 (or CPX2000) with 1" elastic andnonelastic straps.Hook and loop fasteners to provide groin protectionwithout hindering mobility. Construction consists ofdurable EVA foam pads with sponge foam covering onthe inside for comfort surrounded by a black polyestermesh rigging. Weighs only 8 ounces.Code GP300CHECK FOR LATEST PRICES AT WWW.NITON<strong>999</strong>.CO.UK OR CALL 01293 549858


ExoTech®• For hard-shell protection without sacrificing mobility.The cost-effective, lightweight ExoTech® System can bequickly donned or doffed with ease for rapid disturbancecontrol response.• Improved the EXO1000 back panel has been updatedwith attachment points to accommodate the HUEX100Hydration Reservoir• Provides substantial protection from blunt force trauma• Contour moulded PE outer shell features impact ridgesthat disperse the brunt of the blowsECB100 ExoTech® Upper Body &Shoulder• Polyethylene outer shell• L2500 EVA foam & 3mm polyethylene plate chest/back/arm padding• EVA foam & Polyethylene plate shoulder paddingSponge foam & Polyester tricot chest/back/shoulder lining. Mesh chest/back/shoulder outercovering. Mesh arm protector lining. Double rivetedpolypropylene connector straps and hook and loopfasteners. Commercial grade elastic adjustmentstraps with hook and loop fasteners.Size XS-S, M-L or XL-XXXLCode HAECB100EFP150 ExoTech® Elbow & Forearm• Polyethylene outer shell• EVA foam & Polyurethane sponge paddingMesh inner lining. 420 denier nylon outer covering.Commercial grade adjusters with hook and loopfasteners.Size XS-S, M-L or XL-XXXLCode HAEFP150ETP200 ExoTech® Thigh & Groin• Thigh Section: Polyethylene outer shell• Laminated EVA foam & L2500 EVA foam• Mesh inner lining. 150 denier polyester outercovering. Elastic adjusters with hook and loopfasteners.• Groin Section: EVA foam padding with mesh outercovering• Inner polyethylene shellCommercial grade elastic adjusters and connectors.Size XS-S, M-L or XL-XXXLCode HAETP200TS70 Centurion Hard-Shell ShinGuards• Hard polyethylene shells with built-in knee pads,interior leg brace support can safely withstand asubstantial blow to the leg from non-ballistic weaponsor flying debrisIncludes adjustable, removable foot protectors. Nonreflectiveouter surface. Upper knee stabilizing strapwith protective padding. Padded outer ankle protector.Three hook and loop elastic straps on the backside of theleg provide a secure fit. Packed in a nylon gear bag forstorageSizes: Total length excludes foot guard and ankleprotectorMD-9" shin and 13.25" total length (22.5CM, 33.1CM)LG-10" shin and 14.5" total length (25CM, 36.25CM)XL-11" shin and 16.5" total length (27.5CM, 41.25CM)Code HATS70SIZINGEXOTECH SYSTEMCorrect sizing for the ExoTech®System must be obtained from thefollowing series of measurements andinformation.EASY WAYS TO ORDER• Gender• Chest circumference• Waist circumference• Forearm circumference• Thigh circumference• Middle knee to anklelength(01293 549858EXO1000 ExoTech® Hard Shell Disturbance ControlSystem• EVA foam inner padding cushions the body.• Soft brushed tricot and mesh lines the inside to reduce abrasion and provide longtermcomfort.• Each piece of the ExoTech® system fastens and adjusts quickly with durablepolypropylene and elastic straps with hook and loop closures, allowing a custom fitfor a wide variety of body types.Comes with a high-quality, durable nylon gear bag for storage and transport.Code EXO1000EXO1000 Comes with a Hatch E4gear bag for storage and transport.8WWW.NITON<strong>999</strong>.CO.UK17HATCH PROTECTION


XTAKEVA high-density foamfor superior shockabsorptionLightweight TPUand Cordura® nylonconstructionUnique X-shapedthermal plasticurethane (TPU) shellAnti-skid COOLMAXinner surface to keeppad securedSpandex adjustablestraps with Hatch RapidDeployment Clips andhook & loop closure forsecure fitRG800 Dominator Glove with Honeywell Spectra®• The entire hand is protected from sharp weapons by a cut-resistant 100%Honeywell Spectra® knit liner• Constructed with durable goatskin leatherLarge foam padded gauntlets with trauma plates protect the forearm. Half-inchclosed-cell foam pads, divided to allow sufficient hand mobility, cover the back of thehands and fingers. Index fingers are left unpadded for trigger control.Size S-XXLCode HARG800XTAK Knee & ELBOW Pads• Extremely light and flexible,• All-new design provides superior protection and shockabsorption with the flexibility to move the way yourbody moves.One Size Fits AllCode XTAK100 KNEE PADSCode XTAK150ELBOW PADSXTAK is the lightest, strongestproduct of its kind ever created.NH5000 Heavyweight Hood withNOMEX®• This heavyweight, shorter version provides heat andflash-protection.• Constructed entirely of 7 oz. 100% NOMEX®material and NOMEX® thread15 inches in length (37.5 cm). Will not support flame ordecompose up to 800°F (427°C).One Size Fits AllCode NH5000Centurion KNEE & Elbow Pads• Provide excellent protection with half-inch, high-densityfoam covered in durable Cordura® nylon.Polyurethane thermoplastic non-slip caps fastenedwith colour keyed grommets provide additional shockabsorption and ensure long lasting wear. Dual hook andloop fastened elastic straps with reinforced bar tackingprovide a comfortable and secure fit for all sizes (1.5"/3.8cm wide Elbow & 2” / 5.1cm Knee)One Size Fits AllCode EP300 Elbow PadsCode KP250Knee PadsNH6500 Heavyweight Bibbed Hoodwith NOMEX®• Provides heat and flash-protection. The extended biboffers extra protection.• Constructed entirely of 7 oz. 100% NOMEX® materialand NOMEX® thread15 inches in length (37.5 cm). Will not support flame ordecompose up to 800°F (427°C)One Size Fits AllCode NH6500HATCH PROTECTION18Centurion Neoprene Knee &Elbow Pads• Non-reflective and silent• 10mm Shock-absorbing foam covered by a durablenylon laminated neoprene outer layer• Strategically placed Eastex Slip-Not materialprovides excellent grip and extends wear• Hook and loop elasticclosuresThese Neoprene KneePads and Elbow Pads are afavourite of SWAT, corrections,and tactical professionals fortheir light weight and extremecomfort. They are flexible andfit comfortably under or overclothing, making them idealfor long-term wear.One Size Fits AllCode NE35 Elbow PadsCode NK45 Knee PadsKS19 Protective Sleeves with KEVLAR®• Essential piece of tactical equipment protectingthe wrist and forearm with 2-ply, 7-ounce 100%KEVLAR® and resists bites, scratches or cutsfrom sharp objects.The KEVLAR® constructed KS19 is heat and flashresistant,and will not support flame or combust upto 800°F (427°C). Excellent for deploying flash bangs.This sleeve is very light, breathable and will not restrictmovement. 19 inches in length (47.5 cm)One Size Fits All . Sold in pairsCode KS19KNP100 Centurion Neck Protectorwith Kevlar®• Slash protection for your throat, neck and larynx.Designed to be worn with the Centurion and/orExoTech® riot suits. 100% 7 oz. KEVLAR®. Comfortableknit construction with double layer thickness. Stretchone-size-fits-all design. 7 3/4" high for full neckprotection.Code KNP100CHECK FOR LATEST PRICES AT WWW.NITON<strong>999</strong>.CO.UK OR CALL 01293 549858


Hook and loop straps tosecure a baton or flashlight840 denier, water-resistantnylon with PVC backingTwo zipperedcargo pocketsThree open-top pocketsTwo flip-top pocketsSpacious interior compartmenthas an adjustable divider andremovable rigid bottom, twozippered cargo pockets and six penpencil pockets.D1 Patrol Duty Bag• For all your essential gear, the D1 is constructed of 840 denier,water-resistant nylon with PVC backing and features heavy-dutyzippers and removable nylon web shoulder strap.• The spacious interior compartment has an adjustable divider and removable rigidbottom, two zippered cargo pockets and six pen/pencil pockets• The exterior features two zippered cargo pockets, two flip-top pockets, and threeopen-top pocketsHook and loop straps on the padded top can secure a baton or flashlightDimensions: 25"L x 10"W x 12"H (45.7cm x 20.3cm x 30.5cm)Code HAD1A6 Munitions Bag• The Hatch A6 is designed to organize a 37/40mm launcher and plenty of munitions.• Features two clear vinyl document pockets (one interior, one exterior) and several large exterior zipper pouchesfor additional gearConstructed of durable 1000 denier Cordura® nylon and heavy-duty hardware with two molded rubber carryhandles. Two-inch wide padded nylon shoulder straps allow the A6 to be carried as a backpack and can be stowedaway when not in use. Durable 600 denier polyester and 420 denier nylon inside with PVC binding.Dimensions: 17¼" x 11¾" x 4" (43.8 cm x 29.9 cm x 10.2 cm)Code HAA6SIZING HATCH GLOVESUse one of these methods to find yourapproximate glove size. Remember,no two hands are alike. Finger lengthrelative to palm size is not constant fromperson to person. Additionally, whatconstitutes a comfortable fit can varyconsiderably between individuals. Usingone of the methods below will help youto find an approximate glove size, but nomethod of measurement can substitutefor actually trying them on.USING THE SIZING GAUGEt Place your right hand with your indexfinger against the line 8EASY WAYS TO ORDER(MEASUREMENT7 9 10 11 12 13 INXS S M L XL XXL XXXL SIZE01293 549858SIZING CHARTGLOVE SIZE7” (17.8CM) X-SMALL8” (20CM) SMALL9” (23CM) MEDIUM10” (25CM) LARGE11” (28CM) X-LARGE12” (30.5CM) XX-LARGE13” (33CM) XXX-LARGEThe measurement that follows the right side of your hand is your approximate glove size. This is a general size guide only.8FULL LINE BROCHUREAVAILABLE TO ORDERUSING A TAPE MEASUREAND THE SIZING GUIDE(MORE ACCURATE)Wrap a tape measurearound your hand atthe widest point (usuallythe knuckles) and makea loose fist. Note thatmeasurement,round it to thenearest inch andrefer to the chart aboveto find your approximateglove size.WWW.NITON<strong>999</strong>.CO.UK19HATCH PROTECTION


The AutoLock® Baton is always ready when you are by utilizing arevolutionary cam and ball bearing action. Its exclusive patentedbuilt-in safety features make it easy to access, open, control and holdon to. Once opened, it stays locked open until you're ready to collapse itby pushing a single button, one time. Compact and comfortable to wear,AutoLock® Baton is designed to be carried with you at all times. These batons can be used with virtually all standardbaton techniques and tactics or training programs.AutoLock® DefenderProtects your gun hand from hostile strikes with a guard that fits over your knuckles.The guard helps keep the baton firmly in your grip during blocking, striking andjabbing techniques. The AutoLock Defender locks open until you decide to collapse itwith the push of a button. It is easy to access and open with either a flick of your wristor a simple pull to achieve a passive draw.AUTOLOCK BLACK CHROME FINISH WITH FOAM GRIPCODE DESCRIPTION HOLDERMON9180 16” (40.64cm) w/ Safety Tip MON3042MON9170 18” (45.72cm) w/ Power Safety Tip MON3042MON9120 21” (53.34cm) w/ Safety Tip MON3030MON9130 22” (55.88cm) w/ Power Safety Tip MON3034MON9121 26” (66.04cm) w/ Power Safety Tip MON3056AUTOLOCK BLACK CHROME FINISH W/ SUPER GRIPCODE DESCRIPTION HOLDERMON9172 18” (45.72cm) w/ Power Safety Tip MON3042AUTOLOCK DEFENDER - BLACK CHROMECODE DESCRIPTION HOLDERMON9184 16” (40.64cm) w/ Safety Tip MON3061MON9174 18” (45.72cm) w/ Power Safety Tip MON3061MON9144 21” (53.34cm) w/ Safety Tip MON3061MON9154 22” (55.88cm) w/ Power Safety Tip MON3061MON9148 26” (66.04cm) w/ Power Safety Tip MON3061MON9141 21” (53.34cm) w/ Safety Tip MON3030MON9152 22” (55.88cm) w/ Power Safety Tip MON3034MON9146 26” (66.04cm) w/ Power Safety Tip MON30563XT TACTICAL TRAINING POWER SAFETY TIPThe 3xT lime green Tactical Targeting Power Safety Tip helps criminaljustice professionals improve their striking skill because they canclearly see the track of the baton's tip during demonstrations, practiceand/or on the job. The 3xT can be retrofitted on any AutoLock batonwith a Power Safety Tip.AUTOLOCK TACTICAL TARGETING PST W/ FOAM GRIPAUTOLOCK NICKEL FINISH WITH SUPER GRIPCODE DESCRIPTION HOLDERMON9241 21” (53.34cm) w/ Safety Tip MON3030MON9252 22” (55.88cm) w/ Power Safety Tip MON3034AUTOLOCK NICKEL FINISH WITH FOAM GRIPCODE DESCRIPTION HOLDERMON9220 21” (53.34cm) w/ Safety Tip MON3030MON9230 22” (55.88cm) w/ Power Safety Tip MON3034CODE DESCRIPTION HOLDERMON9170/3xT 18" (45.72cm) w/ Tactical Targeting Tip MON3042MON9130/3xT 22” (55.88cm) w/ Tactical Targeting Tip MON3034MON9121/3xT 26” (66.04cm) w/ Tactical Targeting Tip MON3056AUTOLOCK TACTICAL TARGETING PST W/ SUPER GRIPCODE DESCRIPTION HOLDERMON9172/3xT 18” (45.72cm) w/ Tactical Targeting Tip MON3042MON9152/3xT 22” (55.88cm) w/ Tactical Targeting Tip MON3034MON9146/3xT 26” (66.04cm) w/ Tactical Targeting Tip MON3056MONADNOCKAUTOLOCK® HGWith its larger diameter, Monadnock's new AutoLock® HG (Heavy Gauge) offersthe traditional feel of a straight baton, but its high-tech AutoLock features mean itperforms just like our most advanced expandable batons. Its exceptional balance andhigher kinetic-energy potential produce a bigger bang for your effort.AUTOLOCK HEAVY GAUGE WITH SUPER GRIPCODE DESCRIPTION HOLDERMON9641 21” (53.34cm) w/ Safety Tip MON3080MON9652 22” (55.88cm) w/ Safety Tip MON308420Autolock Defender w/ Tactical Targeting Tip w/ Super Grip NYLONMON9174/3xT 18” (45.72cm) w/ Tactical Targeting Tip MON3061MON9154/3xT 22” (55.88cm) w/ Tactical Targeting Tip MON3061MON9148/3xT 26” (66.04cm) w/ Tactical Targeting Tip MON3061AUTOLOCK JR. w/ GROOVED GRIP BLACK CHROMECODEMON9010DESCRIPTION10” (24.13cm) w/ Power Safety TipMOST ITEMS ARE HELD IN UK STOCK - FOR NEXT DAY DELIVERY. ALL OTHER ITEMS ARE AVAILABLE TO ORDER - PLEASE ALLOW 6-8 WEEKS FOR DELIVERYCHECK FOR LATEST PRICES AT WWW.NITON<strong>999</strong>.CO.UK or CALL 01293 549 858


protect & restrainCLASSIC FRICTION LOCKWith a quick flick of your wrist, the baton opens instantly. The distinct sound of themechanism locking into place commands attention, and sends a signal to youropponent that you are armed and ready. This psychological advantage may be all thatis necessary to make a subject think twice about resisting arrest.FRONT DRAW® HOLDERHolder rotates into eight locking positions, making it comfortable to wear. Constructedof durable polycarbonate with clip-on or slide-on back. Holds expanded and closedbatons - Quick draw from any position.DETECTIVE SERIES WITH FOAM GRIPCODE DESCRIPTION HOLDERMON2521 21” (53.34cm) w/ Standard Tip MON3027MON2523 23” (58.42cm) w/ Power Safety Tip MON3036MON2510 24” (60.96cm) w/ Standard Tip MON3032BATON HOLDERSMARINER SERIES WITH FOAM GRIPCODE DESCRIPTION HOLDERMON2530MON253221” (53.34cm) w/ Standard Tip ElectrolessNickel24” (60.96cm) w/ Standard Tip ElectrolessNickelMON3027MON3032CODEMON3030MON3034MON3025MON3027MON3032MON3036MON3010MON3061MON3080/84DESCRIPTION21” Autolock Batons w/ Safety Tip22” Autolock w/ PST or TTT16” Friction Lock w/ Standard Tip21” Friction Lock w/ Standard Tip24” Friction Lock w/ Standard Tip23” Friction Lock w/ Power Safety TipPR24 BatonsAll Defender BatonsAutolock HG BatonsPR-24 CONTROL BATONSCODE DESCRIPTION HOLDERMON1105MON1000PR-24NX Black Hard Coat Anodized1 1/4 x 24” (3.2 x 60.96cm)PR-24S Black Polycarbonate1 1/4 x 24” (3.2 x 60.96cm)MON3010MON3010HINDI BATON CAPCODEMON6216MON6213MON6214DESCRIPTIONHindi Cap for Autolock 16” (40.64cm) / 18” (45.72cm)Hindi Cap for Autolock 21” (53.34) / 22” (55.88cm)Hindi Cap for Autolock 26” (66.04cm)NEW Hindi Cap with Large ButtonMON6210MON6211Hindi Cap for all ALL Friction Lock BatonsHindi Cap for all NON Monadnock Friction Lock BatonsAUTOLOCK SERVICE KITSCODEMON6500MON6500-16MON6500-21MON6500-26DESCRIPTIONAutolock Service Kit - StarterAutolock Armourer’s Service Kit - 16” (40.64cm)Autolock Armourer’s Service Kit - 21” (53.34cm)Autolock Armourer’s Service Kit - 26” (66.04cm)EASY WAYS TO ORDER(01293 549858WINDOW BREAKERThe Window Breaker is designed to fit over the tip of a baton and can beused to gain entry to a home, vehicle or other structure that is otherwiseinaccessible. The hardened steel tip will break the glass quickly and discretelyso that repeated strikes are not necessary.WINDOW BREAKERCODEMON61538DESCRIPTION3 Pack Window BreakerItems with this logo are only available to Police, Armed Forcesor other persons working for the Crown. All orders must beaccompanied by a written order and proof of identity. Itemspurchased will only be delivered to official and bona-fide addresses.WWW.NITON<strong>999</strong>.CO.UK21MONADNOCK


SPARE CUFF22” (55.88cm) when laid flat 1/2½” (1.27cm) wide to reduce subject injury and allowspace to write directly on them.Compact Spare Cuff & Double CuffThe compact versions of the Spare Cuff and Double Cuff are user friendly and easy tocarry and store. An ideal back-up to steel handcuffs, theycan be carried in a pocket, briefcase, glove compartment,or any other discreet location. Compact size is 3 3/8"(8.57cm).DISPOSABLE SPARE CUFFSCODE DESCRIPTION LENGTH MATERIAL COLOURMON4100 Spare Cuff 22” (55.88cm) Nylon BlackMON4101 Spare Cuff 22” (55.88cm) Nylon WhiteAlso available in 100 count bulk package.DOUBLE CUFFDisposable restraint features two individual cuffs rather than the standard single cuff.This gives the officer the ability to control a suspect after one cuff is placed on the wristor forearm.Standard length is 34" (86.36cm) 1/2½" (1.27cm) wide to reduce subject injury andallow space to write directly on them. Greater control during subject cuffing. Tensilestrength of more than 400 lbs. (181.44 kg). Can be used on wrists and ankles.COMPACT DISPOSABLE CUFFSCODE DESCRIPTION LENGTH MATERIAL COLOURMON4104 Spare Cuff 22” (55.88cm) Nylon WhiteMON4105 Spare Cuff 22” (55.88cm) Nylon BlackMON4203 Double Cuff 34” (86.36cm) Nylon WhiteMON4204 Double Cuff 34” (86.36cm) Nylon BlackMON4205 Double Cuff 34” (86.36cm) Nylon Red**** Training ONLYSafety Cutter & CUFF ComboThe Safety Cutter provides lever action for smooth cutting of the Double Cuffand Spare Cuff as well as most other disposable plastic restraints. Pocketsize for convenient storage. Simple to operate with one hand, especially intight spaces, day or night. Cannot be used as a weapon against you – theBreak Point guards against an attempt to access the cutting blade to fashiona weapon. Can be used to cut vehicle seat belts or clothing in an emergency.SAFETY CUTTER & CUFF COMBODISPOSABLE DOUBLE CUFFSCODE DESCRIPTION LENGTH MATERIAL COLOURMON4200 Double Cuff 34” (86.36cm) Nylon WhiteMON4201 Double Cuff 34” (86.36cm) Nylon BlackMON4202 Double Cuff 34” (86.36cm) Nylon Red**MON4210 Double Cuff 34” (86.36cm) Nylon BlueMON4211 Double Cuff 34” (86.36cm) Nylon GreenMON4212 Double Cuff 34” (86.36cm) Nylon OrangeCODE DESCRIPTION MATERIAL COLOURMON4004MON4005MON4006MON4007Safety Cutter /w 2 White CompactDOUBLE CuffsSafety Cutter /w 2 Black CompactDOUBLE CuffsSafety Cutter /w 4 White CompactSPARE CuffsSafety Cutter /w 4 Black CompactSPARE CuffsHIPS/NylonHIPS/NylonHIPS/NylonHIPS/NylonWhiteBlackWhiteBlackMON4213 Double Cuff 34” (86.36cm) Nylon PinkMON4214 Double Cuff 34” (86.36cm) Nylon PurpleMONADNOCKMON4215 Double Cuff 34” (86.36cm) Nylon YellowMON4216 Double Cuff 34” (86.36cm) Nylon Lime GrnMON4217 Double Cuff 34” (86.36cm) Nylon TanAlso available in 100 count bulk package. ** Training ONLYMonadnock has expanded its line of Double Cuffs to include colour-coded models inyellow, pink, lime green, green, purple, blue, orange and tan. These colours can beused to identify threat levels, ages, agency, medical conditions and other factors thatapply.22DISPOSABLE CUFF HOLDERS & CUTTERSCODE DESCRIPTION MATERIAL COLOURMON4031 Compact Cuff Soft Nylon BlackMON4002 HDC For Disposable Cuffs Plastic BlackMON4015 Cuff Bundle Holder Metal MetalMON4000 Metal Cuff Cutter Metal YellowMON4003 Safety Cutter HIPS BlackCHECK FOR LATEST PRICES AT WWW.NITON<strong>999</strong>.CO.UK or CALL 01293 549 858


protect protect & restrain & restrainTRAINING BATONSTo reduce the risk of injury during training exercises, choose from foam orcomposite training batons.Durable DuPont® nylon material covers a neoprene sleeve, which is appliedover a rigid core, vinyl tip for added strength and durability. Provides paddedprotection for blocking, striking and subject-control holds.MONADNOCK PRACTICE SUITThe Monadnock Practice Suit helps you spendmore time training instead of putting on onesmall piece of protective gear after another. Thesuit is easy to put on and take off, like a pair ofpants and jacket, and cleans up with soapand water. Plus, it is made to reinforce thetargeting illustrated in the MonadnockBaton Chart.Code MON5120Available in standard length of 24 inches. Ideal for drawing, blocking,jabbing, striking, spinning and performing subject control holds. Alsoavailable in 36 inch riot model.TRAINING BATONSCODE DESCRIPTION LENGTH MATERIALMON5101 PR-24 Training Baton 24” (60.96cm) FoamMON5103 Straight Training Baton 24” (60.96cm) FoamMON5105 Straight Training Baton 36” (91.44cm) FoamMON5106 Ultimate Straight Training 24” (60.96cm) CompositeCheck for latest priceswww.niton<strong>999</strong>.co.ukor call01293 549858(8MONADNOCK BATON CHARTThe Monadnock Baton Chart has become thebaton targeting standard used by criminaljustice professionals around the world sinceits introduction in 1988.FULL LINE BROCHURESAVAILABLE TO ORDERBATON CHARTCODE DESCRIPTION SizeMON5010MON5004StandardPosterUNIVERSAL TRAINING BAGsHelps bridge the gap between static and dynamic movement in training. Tacticallyused for baton physical-encounter trainingSimulated training scenarios. Punching, kicking, elbowing, kneeing, etc.Action-reaction response drills, including unarmed self-defence training and batontrainingUNIVERSAL TRAINING BAG 2Features a high-tech Force Deceleration Core to dissipate training blows from knees,elbows, fists or training-baton strikes with ease and comfort. Offers six hand positionsto create multiple target positions around the human body, which develops targetacquisitionand application skills for more realism in training.CD COLLECTIONSCODE DESCRIPTION CDMON5330 Instructor Notebook & Internet Series CD 1MON5334 Presentation & Reference Notebook Series CD 1AMON5331 Monadnock History, Part I (1958-1989) CD 1BMON5332 Monadnock History, Part II (1990-1992) CD 1CMON5333 Monadnock History, Part III (1993- ) CD 1DMON5338 Archive Series CD 4MON5344 MEB Certification Program CD 6TRAINING BAGSMON5352 PR-24® Certification Program CD 7CODE DESCRIPTION COLOURMON5354 MDTS Certification Program CD 8MON5002 Universal Training Bag 1 Blue/BlackMON5346 Hindi Baton Cap CD 9MON5006 Universal Training Bag 2 Green/BlackEASY WAYS TO ORDER(01293 5498588WWW.NITON<strong>999</strong>.CO.UK23MONADNOCK


The Hiatt Handcuffs product line offers a variety of uniquefeatures designed to address the needs of today's law enforcement personnel:A unique back-loading feature for fast application - Open cuff can be snapped back intoplace with a quick motion of the wrist and then reapplied without having to release theoffender's hand18 teeth — 3 independent retaining bars with 6 teeth on each make it extremely difficult topick, while providing increased strength as the shackle engages the additional teethA Leaf Spring instead of a coil spring in the double lock mechanism used to foil a suspect'sattempt to overcome the handcuff's double lock mechanismTrue Swing Technology which ensures the swing arm is balanced and centred so it locks intothe centre of the shackle every timeDomed rivets which are bigger on the outside than the inside making it very difficult to popout without drillingFULL LINE BROCHURESAVAILABLE TO ORDERHinge Style HandcuffsSlip your hands around the grip of the hinged handcuffs and feel the control. Inaddition to all the features that come standard with Hiatt Handcuffs, thehinged models are made using solid links to connect the cuffs as opposedto the roller chain used on chain style cuffs. The hinged models providegreater subject control and feel more comfortable in your hand.HH2054BIG Guys & EXTENDED HINGE LINK• 25 locking positions• Shackle diameter from 5-3/4” to 9-1/4” Weighs 12 oz.• Each set serial numbered• Includes two standard handcuff keys17% Larger then standard size tri-hinge handcuffs - idealfor Big Guys who have trouble placing their handsbehind their backCode HH2054 Big Guys Standard HingeCode HH2060 Extended HingeHH2060HIATT HANDCUFFS24HH2003HH2010HH2050STANDARD HINGE LINK• 23 locking positions• Shackle diameter from 5-1/4” to 8-1/4” Weighs 11 oz.• Each set serial numbered• Includes two standard handcuff keysCrafted from high quality steel, the hinge style cuffs feature heavy duty, solidhinges for reinforced holding power.Code HH2050 Standard HingeCode HH2075 Black Standard HingeChain Style HandcuffsHiatt's line of chain style handcuffs set the standard for strengthand reliability. Crafted from heavy duty stainless steel, they havereinforced steel swivels that make them a rugged tool for criminaljustice professionals. Like all Hiatt Handcuffs, they feature an18-tooth, 3-retaining bar system paired with a positiveswing-through action, built-in back-loading feature for fastcuffing, heavy duty construction with oversized rivet headsfor added strength, and side double locks.STANDARD CHAIN LINK• 23 locking positions• Shackle diameter from 5-1/4” to 8-1/4” Weighs 11 oz.• Each set serial numbered• Includes two standard handcuff keysMade from top quality steel, the chain style modelfeatures reinforced steel swivels for added strengthand durability.Code HH2010 Standard ChainCode HH2015 Black Standard ChainCode HH2003 Big Guys ChainCHECK FOR LATEST PRICES AT WWW.NITON<strong>999</strong>.CO.UK or CALL 01293 549 858


Speciality Hinge Style HandcuffsHH-UL1Capable of providing the security and restraint of an ordinaryhandcuff along with the power and control that comes from itssolid bar design.Speedcuffs possess all the features of Hiatt’s Deluxe Handcuffs.SPECIALITY Rigid LINK• 25 locking positions• Minimum inside perimeter: 146mm/5 3/4” & Maximum insideperimeter: 235mm/9 1/4”• Shackles can be backloaded for speed cuffing (an exclusiveHiatt feature).• Double locking. Uses standard keys- 2 included.• Weigh 14 ounces.3 independently floating locking bars, with 6 teeth each bar.Provides extra locking positions with perimeter sizes the widestin the industry.Code HH2103 Rigid CuffCode HHU-L Ultimate HingedHH2103Handcuff AccessoriesNew Lightweight polymer construction housingwith heat-treated steel components for maximumstrength and durability.The lightweight polymer body has a knurled body formaximum grip - and the heat-treated steel componentsoffer the best durability on the market.UTILITY CLIP• Stainless Steel construction• Ideal for holding handcuffs etc.55mm Stainless steel belt clip. Can carry up to 4 pairsof handcuffs or keys.Code AA434Check for latest priceswww.niton<strong>999</strong>.co.ukor call01293 549858(8Handcuff Helper• An Accessory That Prevents Small Wrists FromSlipping Through Fully Closed HandcuffsEasy to install and impossible to remove while the cuff isclosed on a wrist. Provides ultimate security against cuffslipping while reducing wrist injury from abrasion causedby contact with the handcuff locking arm.Code AA439EASY WAYS TO ORDER(TACTICAL KEY RING HOLDER• Maximum security for your keys• Steel exceed 220kg pull testSecurely slides onto belts up to 50mm wide. EasyOne handed operation. Reliable and secure positiveretention. Colour: Black.Code AA06301293 5498588swivel handcuff key• New lightweight Polymer housing with heat-treatedsteel components.• Round Swivel handcuff key with key ring.Fits most common brands including HIATTCode AA016Pen handcuff key• New lightweight Polymer housing with heat-treatedsteel components.• Pocket Pen handcuff key with pocket clip.Fits in your pocket where you can always find it quickly.Fits most common brands including HIATT.Code AA036HANDCUFF TRAINING SPEED KEY• Triple your practice time, unlocks handcuffs insecondsMagnets hold them to cuff for repetitive use. Easilyremoved after training. Fits most standard cuffs (notRigid or Chubb).Code AA022WWW.NITON<strong>999</strong>.CO.UK25HANDCUFFS & ACCESSORIES


QUIKSTEP LadderThe QUIKSTEP Ladder System enhances the effectiveness of theLaw Enforcement Industry.Both Patrol and Tactical Units can benefit from the portability and speed with whichthe ladder can be deployed. These features are key in emergency and quickresponse situations.The QUIKSTEP Ladder has revolutionized an industry lacking in product innovation anddesign. Five characteristics combine to make QUIKSTEP number one in unique ladderservices:• Strength - The QUIKSTEP Ladder is manufactured with cast aluminiumalloy for the frame, extruded aluminium alloy for the rungs, and stainlesssteel connecting pins.• Lightweight - The QUIKSTEP Ladder is light and easy to carry. The10 foot ladder weighs only 26 pounds.• Adaptable - The standard hand carry strap allows quick and easymovement through confined spaces. The optional backpack harnessallows the ladder to be carried on an individuals back, leaving thearms and hands free to function at other tasks.• Compact - The QUIKSTEP Ladder can be folded upto a brief case size. The ladder can be easily stored inthe trunk of a car, or behind the seat of a truck.• Fast - The QUIKSTEP Ladder can be unfoldedand ready for use in under 5 seconds. The speedwith which the ladder can be deployed is critical inemergency situations.StrengthFastLightweightCompactQUICKSTEP LADDERSIZE CODE WEIGHT FOLDED DIMENSIONS OPEN DIMENSIONS6 ft(1.83m)QSR00616 Lbs(7.3kg)23.5 x 13 x 1.8 inches(59.7 x 33 x 4.61 cm)15 x 3.25 x 72 inches(38 x 8.3 x 183 cm)8 ft(2.44m)QSR00821 Lbs(9.5kg)23.5 x 13 x 2.3 inches(59.7 x 33 x 5.8 cm)15 x 3.25 x 96 inches(38 x 8.3 x 244 cm)10 ft(3.05m)QSR01026 Lbs(11.8kg)23.5 x 13 x 2.9 inches(59.7 x 33 x 7.4 cm)15 x 3.25 x 120 inches(38 x 8.3 x 305 cm)12 ft(3.66m)QSR01231 Lbs(14.1kg)23.5 x 13 x 3.5 inches(59.7 x 33 x 8.9 cm)15 x 3.25 x 144 inches(38 x 8.3 x 366 cm)QUICKSTEP LADDERSFAST & LIGHTWEIGHTREADY IN SECONDSDeploys quickly and quietly to a fullyextended position in seconds.Aluminium alloy and stainless steelconstruction = very high strength toweight ratio.26QUIKSTEP Assault LadderThe QUIKSTEP Assault Ladder, designed in cooperationwith the NYPD Emergency Services, is available in 6 and8 foot lengths.Ideal for tubular assaults and 1st story breaches.An increased rung width of 18" provides greater stabilitySame QUIKSTEP folding designAvailable in regular and non-reflective black finishes.QUICKSTEP ASSAULT LADDERSIZE CODE WEIGHT FOLDED DIMENSIONS OPEN DIMENSIONS6 ft(1.83m)8 ft(2.44m)QTA012AQTA012B17 Lbs(7.7kg)22.5 Lbs(10.2kg)29.5 x 13 x 1.8 inches(74.9 x 33 x 4.6 cm)29.5 x 13 x 2.3 inches(74.9 x 33 x 5.8 cm)compact & portabletake it anywhereExtremely compact relative to theoperational length of the ladder.Once folded, it can easily be placed in thetrunk or behind the seat of your vehicle.21 x 3.25 x 72 inches(53 x 8.3 x 183 cm)21 x 3.25 x 96 inches(53 x 8.3 x 244 cm)MEETSFULL LINE BROCHUREAVAILABLE TO ORDERSTRONG & RELIABLECOUNT ON IT• NFPA 1931 - 1<strong>999</strong> edition• CAN-3-Z11-M81• OSHA / ANSI A14.2-2000• BS 2037 : 1994• EN131: part 2 : 1993CHECK FOR LATEST PRICES AT WWW.NITON<strong>999</strong>.CO.UK or CALL 01293 549 858


QUIKSTEP Boarding LadderDesigned in conjunction with Special Forces units for situationswhere a full sized ladder is not required or when workingin confined spaces. Suited for covert operations such as sniperplacement, and vessel boarding.Reliable and easy to both transport and store the QUIKSTEP Boarding Ladderremarkably unfolds from a briefcase size to a fully functional ladder inseconds. Designed for the professional user, this revolutionary, heavy-dutyproduct is the latest in ladder technology.• Built with high quality aluminium alloy for the side rails and stainless steelpins.• Commercial grade rubber non-slip foot and top bumpers provide slipresistance and surface protection• Specially designed aluminium rungs have serrated tread providing safeclimbing• Heavy duty nylon carry strap with quick-release buckles allows for ease ofcarry, plus quick, simple access• Available in standard aluminium and powder coated black finishThe QUIKSTEP Boarding Ladder deploys quickly and quietly to afully extended position in seconds. Aluminium alloy and stainless steelconstruction, give the QUIKSTEP Boarding Ladder a very high strength toweight ratio.The QUIKSTEP Boarding Ladder is extremely compact relative to theoperational length of the ladder. This enables the ladder to be stored andtransported with ease, either like a briefcase or with one of our optionalbackpacks or bags. Once folded, it can easily be placed in the trunk orbehind the seat of your vehicle.BOARDING LADDERSIZE CODE WEIGHT FOLDED DIMENSIONS OPEN DIMENSIONS6 ft(1.83m)8 ft(2.44m)10 ft(3.05m)QSB006QSB008QSB01015 Lbs(6.8kg)19.5 Lbs(8.9kg)24 Lbs(10.9kg)17.5 x 13 x 2 inches(44.4 x 33 x 5.1 cm)17.5 x 13 x 2.5 inches(44.4 x 33 x 6.4 cm)17.5 x 13 x 3 inches(44.4 x 33 x 7.6 cm)9 x 3.25 x 72 inches(23 x 8.3 x 183 cm)9 x 3.25 x 96 inches(23 x 8.3 x 244 cm)9 x 3.25 x 120 inches(23 x 8.3 x 305 cm)QUIKSTEP WEB LadderThe newest member of theQUIKSTEP Ladder family, the WebLadder delivers an unprecedentedadvancement in lightness, easeof deployment, stealth and mostimportantly climb ability.• All our Web Ladders are completelyreversible• The unique rungs, anchoring loop, rappelloop and connector loops are designed forease of set up and for safety• Each rung consists of an aluminium bar sewnbetween two lengths of webbing• The rungs are stitched up as well as downthe side rails for maximum strength andreversibility• The standard length of the Web Ladder is 25’• Additional ladders can be connectedtogether easily with out compromising safetyor strength8” SINGLE RUNGCode QSW0087” DOUBLE RUNGCode QSW007RUNGS 8” wide single rung (7”-eachdoublerung) semi-rigidSafe working load 1000 lbsLOAD Main Frame 4000 lbsRappel Loops 1000 lbsConnector Loops 2000 lbsLENGTH Standard 25’ LengthSTORAGE BAG• Black nylon, comes with Draw Cord &Carry StrapCode BAB101 SingleCode BAB102 Double12 ft(3.66m)QSB01228.5 Lbs(13kg)17.5 x 13 x 3.5 inches(44.4 x 33 x 8.9 cm)9 x 3.25 x 144 inches(23 x 8.3 x 366 cm)Carry Bag• Fits all QUIKSTEP Ladders• All stress seams are edge bound and doubleFeatures a heavy duty 400 denier nylon shell with PVC backing,and has wrap-around handles for comfort. It also features 1inch heavy duty webbing and a velcro closure to keep theladder clean and ready for use for years to come.Code BAB112 Assault bag 6 & 8 ft ladderCode BSB108 Standard bag-small 6 or 8 ftCode BSB112 Standard bag-large 10 or 12 ftThe QUIKSTEP Ladder Test ResultsThe QUIKSTEP Ladder family have been independentlytested to meet all weight and strength tests to the followingstandards:STANDARD GRADE DUTY RATING NOTESNFPA 1931 -1<strong>999</strong> editionCAN-3-Z11-M81OSHA / ANSIA14.2-2000BS 2037 : 1994EN131: part 2: 1993Swivel HooksFolding laddersEASY WAYS TO ORDER300 lbs andgreater(Straight laddersonlyGrade 1 250 lbs all laddersGrade 1AGrade 1Grade 1300 lbs250 lbs250 lbsup to 12’ length6’ A-framefor 14’ length*special orderonlyBritish Standard for Portable Aluminium LaddersClass 1 : Industrial 130 kg‘Requirements. Testing, Marking ‘ for Portable Ladders :by the European Committee for Standardization (CEN)Full pass all ladders up to 14’Attached to any of our folding Ladders2000 lbs ( 907 kg) suspended from the ladder which isin a vertical position with all the weight carried by thetips of the hooks¾” dia steel rod Full Pass01293 549858BACK PACK HARNESS• Webbing is heavy duty MIL-W-17337 Type 4• Made of 1000 Denier Cordura nylon, rip-stop,urethane coated, water repellant• Padded with 0.5” (12 mm) Hi-Density foam• Hand Carry Strap2 inches (50mm) padded hip belt, padded back& contoured shoulder straps. Sternum strap andtorso lumbar control waist belt. Fits all QuikstepLadders (standard & assault). Three quick releasebuckles with adjustable straps hold the QUIKSTEPLadder securely to the back pack yet allows forrapid removal of the ladder when needed withouthaving to remove the entire back pack from theuser.Code BPH1148WWW.NITON<strong>999</strong>.CO.UK¾” dia Steel Rod Swivel Hooks• Heavy duty plated construction• Spring loaded quick pins make adjusting theSwivel Hooks quick and easy• Three different locked positionsWill not affect ladder folding and operation.Weighs only 5 lbs (2.27 kg) for the pair. HangTested to Hold 2000 lbs (907kg). Provideimproved storage ability over standard roofhooks. Swivel Hooks are factory installed on anylength and style of ladder.Code HSB10827QUIKSTEP LADDERS

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!