NEW AQUAREA AIR TO WATER HEAT PUMP - Komfovent

What makes the Air to Water Heat Pump work· The outdoor unit: this captures the free energy from the outdoor air andbrings it into the house by means of the hydraulic module. This freeenergy is transported to the hydraulic module using an environmentallyfriendlyrefrigerant gas with a high thermal exchange coefficient (R410A).· Via the hydraulic module and control panel, temperature inside the housecan be controlled and efficiency maximised. The heat exchanger transmitsthe energy contained in the refrigerant coming from the outdoor unit tothe water used for the home's heating and hot water.The hydraulic module manages priorities in terms of heating and hotwater production.In the case of the Bi-Bloc system, this hydraulic module is situated insidethe property, and it is contained within outdoor unit in the Mono-Blocsystem.· The hot water cylinder heats the hot water. It is made of stainless steel,which guarantees it a very long life. It is also fitted with a 3 kW elementto ensure maximum comfort when outdoor temperatures are very low. Theheater, situated at the top of the cylinder, guarantees maximum efficiencyand faster heat-up.A 3-way valve for the hot water cylinder connection is supplied with thehot water cylinder.· Other necessary or optional features (not provided by Panasonic):- Room temperature thermostat, which can be connected to the Aquareasystem to ensure optimum room temperature conditions.- Solar kit, to connect photovoltaic solar panels for even greater efficiency.· A 3 kW immersion heater is included within the hot water tank to ensure:- Maximum comfort- Maximum efficiency- Protection against the legionella virusTwo or three earth leakage cut-outsThe Aquarea hydraulic module has differential cut-off ensuring maximumsafety in the event of a short circuit:- 2 differential cut-outs: 3, 5, 6 and 9 kW- 3 differential cut-outs: 12, 14 and 16 kW24