View Sure-Craft Universal Antifreeze/Coolant Brochure

SURE-CRAFT UNIVERSAL Antifreeze/CoolantSURE-CRAFT Universal Antifreeze/Coolant is a superior quality ethylene glycol based enginecoolant with a low silicate corrosion inhibitor package. This product protects coolant systemmetals, including heat-rejecting aluminum, against pitting caused by cavitation and corrosion. Itprovides exceptional cooling in summer and excellent protection against freezing in the winter.It is recommended for use in older model domestic and foreign cars and light duty trucks andwill provide up to 80,000 km or 2 years service life when installed as initial fill, or after acomplete flush and cleaning of a cooling system in reasonable condition. It is compatible withsupplemental coolant additives (SCA) and coolant filters and thus can be used in heavy dutydiesel coolant systems when pre-charged with SCA.SURE-CRAFT Universal Antifreeze/Coolant offers the following advantages:Low silicateAluminum compatibleFor domestic and foreign cars and light duty trucksYear round protection: prevents winter freezing and summer boil overSURE-CRAFT Universal Antifreeze/Coolant meets the performance requirements of thefollowing engine antifreeze/coolant specifications:ASTM D3306, D4985Chrysler MS7170Ford ESE-M97B44-AGM 1825M, 1899MTMC RP 302BCoolant concentrate must be diluted with water prior to use. SURE-CRAFT Universal Antifreeze/Coolantshould not be used in concentrated form. A 50% dilution is generally recommended for the best balance ofprotection against freezing, corrosion and summer boil over. For increased freeze protection in extremelycold areas, a 60% volume concentration can be used. Concentrations of greater than 70% by volume arenot recommended. High quality soft, de-ionized or distilled water should always be used to dilute coolantconcentrate. For added value and convenience, this product is available in a ready to use format, predilutedto 50% volume using deionized water.Typical Product PropertiesCharacteristic Performance Test MethodpH a 10 – 11 ASTM D1287Specific gravity b 1.110 - 1.140 ASTM D1122Freeze point a , °C/°F -37/-34 ASTM D1177Foam volume, ml 150 max. ASTM D1881Foam break time, second 5 max. ASTM D1881Reserve Alkalinity, ml 6.0 min. ASTM D1121Chloride, ppm 25 max. ASTM D3634Silicon (from silicate), ppm 250 max. ASTM D6130ColourGreenGlycol Content (wgt.%)95 min.Inhibitors and Water Content (wgt.%)5 max.a50% volume aqueous solutionbMeasured at 15.6ºC/60ºFCreated on 7-Apr-08Page 1 of 2

SURE-CRAFT UNIVERSAL Antifreeze/CoolantTypical Coolant Performance Testing ResultsMetal TypeASTM D 1384GLASSWARE CORROSIONASTM D 2570SIMULATED SERVICETest Results¹ Max. Spec. Test Results¹ Max. Spec.Copper 1 10 2 20Solder 4 30 0 60Brass 2 10 1 20Steel 2 10 1 20Cast Iron 3 10 0 20Aluminum 3 30 -1 60¹ Weight loss, except negative sign which indicate weight gain, per coupon in milligrams. Values are for coolant made from virginethylene glycol.Test Results¹SpecificationASTM D4340 Heat Rejecting Aluminum Corrosion(mg/cm²/week)ASTM D2809 Aluminum Water PumpCavitation- Erosion Corrosion Rating0.2 1.0 maximum9 8 minimum¹ Weight loss per coupon in milligrams (average for 2 tests). Values are for coolant made from virgin ethylene glycol.NOTICE: This product is shipped in compliance with applicable laws and regulations regarding classification, packaging, shipping and handling. The performance andphysical property data described for this product are typical results not sale specifications, except where maximum or minimum is indicated. Refer to Material SafetyData Sheets for further information.Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsible for determining whetherproduct and the information in this document are appropriate for their use and for ensuring that their workplace and disposal practices are in compliance with applicablelaws and other governmental enactments. The manufacturer’s warranty is limited to the claims of product meeting stated performance specifications. It is theresponsibility of the end-user to determine product suitability as recommended in the owner’s manual and to follow engine manufacturer’s instructions.Created on 7-Apr-08Page 2 of 2