Q-Railing - Morse Industries

RAILING SYSTEMS • Panelgrip systemPANELGRIP DRY GLAZE SYSTEM - Patent PendingAluminum Base ShoePanelGrip Base Shoe is extruded from 6005-T5 in mill finish.Aluminum Base Drain BlockPlaced under exterior installed base shoes to provide drainage space forwater runoff. Great for balconies and decks. 10 blocks per package.1.93”.410”.410”1.68”Part# MeasurementA42-0013-10 2 1/4” x 2 1/2” x 3/8”3 1/4”4 1/8”3 1/4”4 1/8”Steel Weld Block3/4”1 1/4”3/4”1”Part# MeasurementS42-0013-10 2-1/4” x 2-1/2” x 1/2”1 3/4”2 3/4”A42-0074Stocked in:10’ & 20’ lengths -CB, CS & Undrilled(PanelGrip System)For use with 3/4”glassScrews & BoltsA42-0075Stocked in:10’ & 20’ lengths -CB, CS & Undrilled(PanelGrip System)For use with 1/2”glassPart# Description MeasurementF92-0075FH Stainless Steel Flat 1/2” - 13 x 1 1/4”Head Screws (10 per pkg)F92-0075WB Zinc Plated Wedge-Bolt ® 3/8” x 4”Orange Tip (10 per pkg)1 3/4”2 1/2”Please refer to page 16 for custom drilling patterns.CladdingStainless Steel.035 gauge/thickness, #8 polished or #4 brushed finishes are standard.Part# A B Length Base SectionS16-0075 13/16” 4 1/8” 10’, 12’ A42-0075S16-0074 13/16” 4 1/8” 10’, 12’ A42-0074Aluminum.050 gauge/thickness, available in clear satin and dark bronze.Part# A B Length Base SectionA16-0075 13/16” 4 1/8” 10’, 12’ A42-0075A16-0074 13/16” 4 1/8” 10’, 12’ A42-0074AABBS16-0075A16-0075S16-0074A16-0074Recommended Attachment OptionsTake care to properly align cladding before pressing into place.1. Apply two rows of tape to the verticalface of the cladding and apply asilicone bead between the rows.2. Apply three rows of tape to thevertical face of the cladding.3. Apply silicone to the vertical faceof the cladding. Use clamps tohold the cladding in place until thesilicone cures.All drawings shown in inches0 1 2 3 4 5 6 7 8See Metric Converter, page 60Nationwide Supplier of Railing Systems & Components5