Mercer's 2015/2015 Product Catalogue

SEASTAR HELM PUMPS
Helm rotor supported by three roller bearings for durability. Ball bearing piston race for smooth operation. Easily
replaceable shaft seal for fast field repair. 1/4” NPT ports. Built-in lock valve for positive rudder lock, no extra
plumbing. Patented bleed tubes make bleeding the helm a snap. Internal air pocket eliminates oil expansion
overflow. Integral relief valve.
SEASTAR 1 “FRONT MOUNT” HELM PUMP
Compact, stylish design. 1.7 cubic inch displacements.
Convenient front of dash fill. Small 3.0" hole cutout on
dash. . Complete with elbow fittings and ORB to NPT. For
light displacement boats up to approx. 30’.
42-441K .........................HH5271-3 ..................595.00
SEASTAR 1 “TILT MOUNT” HELM PUMP
5 wheel positions allow adjustment to most
comfortable steering position. 48 degree tilt range (18
down - 30 up). 1.7 cubic inch displacements. Convenient
front of dash fill. Complete with elbow fittings. For light
displacement boats up to approx. 30’.
42-033K.........................HH6541-3 ...................869.00
BAYSTAR “FRONT MOUNT” HYDRAULIC
STEERING HELM
Super low friction, fixed displacement helm pump from
the world’s foremost manufacturer of manual hydraulic
steering systems. Provides 4 1/2” turns lock-to-lock when
used with Baystar outboard cylinder. Suitable for use on
outboard installations up to 150HP. Requires a 3” diameter
cut-out. 1/4” NPT ports. 3/4” standard taper shaft.
42-620K ....................... HH4314.......................389.00
Steering,Controls & Cables
SEASTAR 1 “REAR MOUNT” HELM PUMP
Behind dash mounting configuration. 1.7 cubic inch
displacements. Top of dash fill point. Complete with
elbow fittings. For light displacement boats up to
approx. 30’.
42-032K.........................HH5261-3 ...................680.00
SEASTAR 1 “PRO-TILT MOUNT” HELM PUMP
Pre loaded dual taper bearings ensures minimal excess
free play. Smooth operation and feel. Shaft seals to
prevent water ingress. 48 degrees of tilt articulation. 5
positive lock positions. Compact footprint. Maintenance
free. Fits most styled and formed dashes.For light
displacement boats up to approx. 30’.
42-438K.........................HH6489-3 ...................965.00
BAYSTAR “TILT” HYDRAULIC STEERING HELM
BayStar allows you to install all of the safety, reliability and
comfort of hydraulic steering onto your boats rated to a
MAXIMUM of 150 HP (total). Displacement: 1.4 cu inch.
Shaft: 1/2" threaded. Mounts:(3) 3/16" diameter holes.
Cutout: 3" diameter. Designed for smaller outboards. 4.5
turns from lock-to lock. Super low friction helm for smooth
comfortable steering.
42-621K ....................... HH4315.......................638.00
SEASTAR REPLACEMENT PARTS & ACCESSORIES
SEASTAR 2 HELM PUMP
Specifically designed to be used on smaller fishing
vessels involved in the Lobster and Crabbing Industries.
The Commercial Helm Pumps are designed with a
stainless steel shaft and heavy duty shaft seal and
wiper. This new shaft and seal help protect the Helm
Pump from the abrasive effects of sediment that is
brought on board by the operator handling Traps or
Pots. 2.4 cu.in. displacement. For light displacement
boats up to approx. 36’.
42-442K..............HH5224 Commercial .............809.00
2.4 cu.in. displacement. For light displacement boats up
to approx. 36’.
42-440K .............HH5272 Front Mount ............685.00
Replacement Helm Nut Kit
Includes nut, key, shaft seal, and seal plate.
42-306P........................HP-6032 .........................11.75
Compression Tee with Nuts
For use with 3/8” hose.
42-199R ..........................................................5.90/ea.
Fitting Kit for Copper to Nylon Tubing
42-016P........................HF-5507 .........................39.25
SEASTAR OIL
For use with SeaStar I & II Systems.1 litre.
42-029K...............................................................24.95
20° Wedge Kit
This kit is designed to mount the helm at a
20° angle to the mounting surface. 4
possible mounting configurations are
available.
42-351K...............HA5419...............76.95
Prices are subject to change. Check our website for up to date prices. www.mercersmarine.com 61