Mercer's 2015/2015 Product Catalogue

Pumps,Hoses & Plumbing
3700 BILGE PUMPS
Heavy duty construction for both commercial and
pleasure boat use. 1 1/2” discharge outlet. For automatic
use, a “Superswitch” is recommended.
32-012P ..........12v, 15.5 amps, 3700 gph ..........277.45
32-013P ...........24v, 6.9 amps, 3500 gph ...........291.20
32-014P ...........32v, 5.0 amps, 3500 gph ...........288.05
32-099P ....................Repl. Strainer........................9.50
GENERAL PURPOSE PUMPS
This model is designed for use as a washdown pump, but
can also be used for fire fighting. This unit is not self
priming and must be mounted below the waterline.
Although not designed as a high pressure pump, it
delivers lots of water.
Requires 1 1/2” intake and discharge hose.
32-015P ...........12v,15.5 amps, 3800 gph ..........309.00
32-314P............24v, 6.9 amps, 3700 gph ...........316.25
32-016P............32v, 5.0 amps, 3700 gph ...........344.50
RULE-MATE AUTOMATIC BILGE PUMPS
Automatic Bilge Pumps feature a pump and a nonmercury
float switch in a single, compact housing. There
is no on/off cycling and therefore, no power use until the
pump comes on. The pump remains on until the float
drops and the pump senses no load against the impeller.
1 1/8” discharge hose.
32-337P............12v, 4.8 amps, 1500 gph ...........249.65
32-338P............12v, 8.4 amps, 2000 gph ...........321.45
2000 BILGE PUMPS
Engineered to commercial standards, the rule 2000 is the
best selling, high capacity, submersible pump in the
world. 1 1/8” discharge outlet.
32-084P....................12v, 8.4 amps ...................167.45
32-085P .....................24v, 4 amps.....................183.90
32-086P....................32v, 3.1 amps ...................184.85
32-098P ....................Repl. Strainer......................10.05
1000 BILGE PUMP
Very popular pump for many deep “V” hull boats. Gas
resistant strainer base measures 2 3/4” x 2 1/2” for
installation in very small areas. 1 1/8” discharge outlet.
32-082P....................12V, 2.9 amps .....................56.65
ECO-FRIENDLY RULE-MATE AUTOMATIC BILGE
PUMPS
No float switch required. Pump activates when water
reaches 2 3/4” and shuts off when water is pumped out.
The 500gph pump has a 3/4” outlet, and the 1100gph
has 1 1/8” outlet. Supplied with one straight and one
90 degree adaptor.
32-335P ..............12v, 2 amps, 500 gph................80.75
32-336P............12v, 3.4 amps, 1100 gph ...........135.40
1500 BILGE PUMP
High pumping capacity and reliability at a lower cost.
More exclusive design features than any comparable
competitive pump. 1 1/8” discharge outlet.
32-083P .....................12V, 4 amps.....................121.20
32-098P ....................Repl. Strainer......................10.05
500 BILGE PUMP
This unit offers many design features while keeping size
and cost to a minimum. Pumps 500 gph and has 3/4”
outlet.
32-081P....................12v, 1.9 amps .....................34.55
Bulkhead mounting bracket
32-097P.................................................................6.75
LOPRO 900 GPH BILGE PUMP
900 GPH Low Profile Bilge Pump. Fits into hard to reach
places. Threaded discharge ports with mulitiple fittings
available (3/4” , 1” & 1 1/8” fittings). Features a tricuspid
check valve to minimize back flow of water. Height of
the pump is only 2-1/4". The entire discharge body
swivels up to 180° for ease of installation. The hose
attached can also swivel 360° to route the hose
perfectly.
Non-automatic
requires float and or panel switch to automate.
32-024P .....................12V, 4 amps.......................61.45
Automatic
32-025P .....................12V, 4 amps.......................82.75
94 Visit www.mercersmarine.com for all the latest pricing and information.