PRODUCT MANUAL Rada-Presto TF2000/TF2000S/TF2010S

More documents

Recommendations

Info

Knob Removal1. Isolate the water supply.2. Insert a 3 mm hexagonal key in the hole in the skirt and engage it in the knobhexagon. Turn it 1/2 a turn anticlockwise against the stop, do not force.3. Remove the hexagonal key from the knob hexagon and pull off the knob.4. Remove the spring (certain models).5. Replacement is the reverse procedure.3 mmHexagonal KeySkirt and Cartridge RemovalKnob Removal1. Isolate the water supply.2. Remove the knob.3. The skirt is a push/pull fit located in the tap body by a protruding dowel. Pull theskirt free of the tap body.4. Unscrew the head nut from the tap body with the special tool or a suitable boxspanner.5. Remove the head assembly and the attached cartridge.6. Replacement is the reverse procedure.Special ToolUpper StopHead NutSkirtSkirt and Cartridge Removal16
Flow Straightener1. Insert the special tool in the flow straightener spout and unscrewanticlockwise.Flow Regulator(Optional)FlowStraightenerSpecial ToolFlow Straightener RemovalFlow Regulator (optional)1. An optional 4 l/min flow regulator is available (refer to section: 'Spare Parts').2. Remove the flow straightener using the special tool (available from CustomerSupport)3. Insert the flow regulator into the back of the flow straightener.4. Install the flow straightener/regulator assembly using the special tool.Flow RegulatorFlow StraightenerFlow Regulator AssemblySpecial Tool17
Page 3 and 4: IntroductionRada-Presto taps are sp
Page 5 and 6: DimensionsTF2000 / TF2000S126 mm66
Page 8: Time cycle:Supplied in position 1,
Page 13: OperationTF2000The TF2000 is simple
Page 18 and 19: Spare Parts887.11 Blue skirt (cold)
Page 20: Customer Care1063825-W2-A(1506)20©

PRODUCT MANUAL Rada-Presto TF2000/TF2000S/TF2010S

Create successful ePaper yourself

Delete template?

Save as template?