PRODUCT MANUAL Rada-Presto TF2000/TF2000S/TF2010S

SpecificationsImportant Points:1. The installation, commissioning and maintenance of this product must be carriedout in accordance with instructions given in this Manual, and must be conductedby designated, qualified and competent personnel.2. Installations must comply with all Local/National Water Supply AuthorityRegulations/Bye-laws, and Building and Plumbing (UK: BS6700) Regulations.3. Rada-Presto products are precision-engineered and should give continuedsuperior and safe performance, provided:• they are installed, commissioned, operated and maintained in accordancewith these recommendations• periodic attention is given as necessary to maintain the product ingood functional order. Recommended guidelines are given in section:'Maintenance'.4. Warning! Continued use of this product in conditions outside the limits listed inthis section can severely affect the performance and reduce the effective servicelife, and can present potential risk to users.Normal Operating Conditions are considered as:• inlet dynamic pressures nominally balanced to within 10% of each otherduring flow• Stop valves with check valves to isolate system supplies.• daily usage of 1-6 hours• installation and usage environment not subject to extremes of temperature,unauthorised tampering or wilful abuse.Operating Parameters:Temperature range:The temperature of stored water should never exceed 65°C. A stored watertemperature of 60°C is considered sufficient to meet all normal requirements andwill minimise the deposition of scale in hard water areas.Pressure:Minimum maintained pressure 0.15 barMaximum maintained pressure 10.0 bar