FITNET FFS –MK7 – <strong>Annex</strong> CLeggatt, R H, Interim recommendations for treatment of residual stresses in defect assessment of fast reactor,Report FRDCC/SIWG/DASG/P(87)143 Issue 2 (1987).Repair WeldsBryan, R H, Merkle, J G, Iskander, S K, Whitman, G D, Holz, P P, Test of a thick vessel with a flaw in residualstress field, Proc. Conf. on Pressure vessels and piping, San Francisco, ASME, June (1979).Dong, P, Hong, J K, Zhang, J, Rogers, P, Bynum, J, Shah, S, Effects of repair weld residual stresses on widepanelspecimens loaded in tension, Approximate Methods in the Design and Analysis of Pressure Vesselsand Piping Components, 125-139, ASME (1997).Hepworth, J K, Surface residual stress in weld repairs made without preheat or post weld heat treatment,CEGB Report TPRD/M/1427/R84 (confidential), July (1984).Junek, L, Ochodek, V, Slovacek, M, The effect of repair welding residual stress on steam generator lifetime,PVP-373, Fatigue, Fracture, and <strong>Residual</strong> <strong>Stress</strong>es, 377-386, ASME (1998).Leggatt, R H, <strong>Residual</strong> stress measurements at repair welds in pressure vessel steels in the as-weldedcondition, The Welding Institute Report 315/1986, October (1986).Leggatt, R H, Interim recommendations for treatment of residual stresses in defect assessment of fastreactor, Report FRDCC/SIWG/DASG/P(87)143 issue 2 (1987).Lidbury, D P G, The significance of residual stresses in relation to the integrity of LWR pressure vessels, Int JPres Ves Piping 17, 197-328 (1984).Ma, N X, Ueda, Y, Measuring methods for three-dimensional residual stresses with the aid of distributionfunctions of inherent strain (Report II) Trans JWRI 23, no. 2, 239-247 (1994).Ueda, Y, Kim, Y C, Garatani, K, Yamakita, T, Bang, H S, Mechanical characteristics of repair welds in thickplate (Report 1), Distributions of three dimensional welding residual stresses and plastic strains and theirproduction mechanisms, Trans JWRI 15, no.2, 359 (1986).Transition WeldsDarbyshire, J M, Some effects of strain gauge position and orientation on residual stresses in welded joints asmeasured by the centre hole technique, CEGB Report RD/L/2049N81, July (1981).Faure, F M, Leggatt, R H, Martin, B A, Measurements of residual stresses in an austenitic ferritic transitioncircular joint, The Effects of Fabrication Related <strong>Stress</strong>es on Product Manufacture and Performance, paper33, p213, 1987, ISBN 0-85300190-1 (1987).Williams, J A, <strong>Residual</strong> stresses in austenitic:ferritic transition joints fabricated with austenitic weld metal,CEGB Report RD/M/N1122 (1981).Patch in Plate WeldsDarbyshire, J M, <strong>Residual</strong> stress measurements on a commercial PWR nozzle weldment, CEGB ReportRD/L/3332/R88, July (1989).Fidler, R, <strong>Residual</strong> stresses associated with welds in austenitic steel, CEGB Report R/M/N953, August(1977).<strong>Annex</strong> C.46© FITNET 2006 – All rights reserved
(01 May 2006) FITNET MK7Fidler, R, The effect of time and temperature on residual stresses in austenitic welds, CEGB memoMM/STRUCT/TC 153 (confidential).Leggatt, R H, Investigation of proposed procedures for the inclusion of residual stresses in the revised fracturesections of PD 6493, The Welding Institute Report 7011/01.87/584.1, November (1987).Cylinder to Dome WeldsDevonshire H F, Suggested alternative as-welded residual stress profiles, AEA-RS-4325, March (1993).Fidler, R, Collaborative programme on the correlation of test data for the design of welded steam pipes. Ananalysis of the residual stress data from the pipe welds, CEGB Report RD/M/1162/R81 (confidential), July(1981).Leggatt, R H, Interim recommendations for treatment of residual stresses in defect assessment of fast reactor,Report FRDCC/SIWG/DASG/P(87)143 issue 2 (1987).Lidbury, D P G, The significance of residual stresses in relation to the integrity of LWR pressure vessels, Int JPres Ves Piping 17, 197-328 (1984).Narasimha Murthy, Y V L, Venkata Rao, G, Krishna Iyer, P, Analysis of residual stresses in hemisphericalhead to cylindrical shell joints of steam generator by weld cycle simulation, J Mater Process Technol 44, 273-280 (1994).Ueda, Y, Nakacho, K, Distributions of welding residual stresses in various welded joints of thick plates, TransJWRI 15 No. 1, ll3 (1986).© FITNET 2006 – All rights reserved <strong>Annex</strong> C.47
- Page 1 and 2: (01 May 2006) FITNET MK7Annex CResi
- Page 3 and 4: (01 May 2006) FITNET MK7L,BσRLongi
- Page 5 and 6: (01 May 2006) FITNET MK7C.3 Stress
- Page 7 and 8: (01 May 2006) FITNET MK7r0and0(i.e.
- Page 9 and 10: (01 May 2006) FITNET MK7z = distanc
- Page 11 and 12: (01 May 2006) FITNET MK7C.10 Set on
- Page 13 and 14: (01 May 2006) FITNET MK7C.12 Transi
- Page 15 and 16: (01 May 2006) FITNET MK7Table C. 1
- Page 17 and 18: (01 May 2006) FITNET MK7(c) Transve
- Page 19 and 20: (01 May 2006) FITNET MK7(c) Transve
- Page 21 and 22: (01 May 2006) FITNET MK7(b) Longitu
- Page 23 and 24: (01 May 2006) FITNET MK7(c) Transve
- Page 25 and 26: (01 May 2006) FITNET MK7(c) Transve
- Page 27 and 28: (01 May 2006) FITNET MK7Distributio
- Page 29 and 30: (01 May 2006) FITNET MK7(c) Transve
- Page 31 and 32: (01 May 2006) FITNET MK7(c) Transve
- Page 33 and 34: (01 May 2006) FITNET MK7K is define
- Page 35 and 36: (01 May 2006) FITNET MK7Longitudina
- Page 37 and 38: (01 May 2006) FITNET MK7Janosch, J
- Page 39 and 40: (01 May 2006) FITNET MK7Stout, R D,
- Page 41 and 42: (01 May 2006) FITNET MK7Coleman, M
- Page 43 and 44: (01 May 2006) FITNET MK7Leggatt, R
- Page 45: (01 May 2006) FITNET MK7Mohr, W C,
- Page 49 and 50: (01 May 2006) FITNET MK71.0LBW, But
- Page 51 and 52: (01 May 2006) FITNET MK71.0FSW, But
- Page 53 and 54: (01 May 2006) FITNET MK7C.15.2 Lase
- Page 55 and 56: (01 May 2006) FITNET MK7Through thi
- Page 57 and 58: (01 May 2006) FITNET MK7Mises stres
- Page 59 and 60: (01 May 2006) FITNET MK7Mises stres
- Page 61 and 62: (01 May 2006) FITNET MK7Elastic str