READ MORE - King Industries, Inc.

NEW NACORR Rust & Corrosion Inhibitors …New Chemistries for Waterborne CoatingsFor over four decades, the NACORR ® trade name has been synonymous with extremely effective,sulfonate based rust and corrosion inhibitors. Known for their synergy with environmentallyacceptable anti-corrosive pigments, NACORR inhibitors have long been used to formulatechromate-free coatings. The next generation of NACORR inhibitors in this flyer not only representthree new chemical technologies but continue to provide outstanding performance in waterbornesystems while offering a path to chromate-free coatings.NACORR 1389TechnologyAppearance%Active SolventAttributesSulfonateCarboxylateComplexClear brownliquid45 2-butoxyethanol Versatility - effective in WB & SBcoatings Can act synergistically withanti-corrosive pigments Improves water resistance byproviding a barrier effect andreducing water permeationNACORR XR-417MetalComplexClearliquid50 2-butoxyethanol Easily incorporated/dispersed inwaterborne coatings Effective in WB & SB systems Can act synergistically withanti-corrosive pigmentsRegulatoryProductUSATSCACanadaDSLEuropeECCJapanMITIAustraliaAICSKoreaECLPhillipinesPICCSChinaIECSCNACORR1389NACORRXR-417√ √ √ √ √ √ √ √√ √ √ √ √ √ √ √

NACORR 1389 PerformanceBaked Water Reducible Acrylic/HMMM500 Hours Salt SprayAir Dry Water Reducible Alkyd Enamel250 Hours Salt SprayControl 2% NACORR 1389 Control 2% NACORR 1389NACORR XR-417 PerformanceAir Dry Styrene Acrylic Enamel250 Hours Salt SprayAir Dry Water Reducible Primer250 Hours Salt SprayControl 2% NACORR XR-417 Control 2% NACORR XR-417

Use Levels & IncorporationNACORR Typical Use Levels IncorporationNACORR 13891.0 to 2.0% as supplied onformulation depending onapplicationCan be added to the mill base or post added with good shearNACORR XR-417 1.0 to 2.0% as supplied onformulation depending onapplication requirementsCan be added to the mill base or post added with good shearAdditional InformationVisit us at:www.kingindustries.comKing Industries, Inc - USACoatings Additives DivisionScience Rd.Norwalk, CT 06852Phone (203) 866-5551Email:coatings@kingindustries.comKing Industries - EuropeMr. Marcel GroenewoudNoordake 642741 EZ WaddinxveenThe NetherlandsPhone: +31 182-631360Email: mg@kingintl.nlKing Industries - AsiaDr. Zhiqiang Alex He42 Ju Lin Ya YuanRich Mond Hill (Juhaoyuan)Bo Ai 7th RoadZhongshan, Guangdong,China 528403Phone: +86 760-88229866Email:alex.he@kingindustries.comThe conditions of your use and application of our products, technical assistance and information (whether verbal, written or by way of product evaluations), including any suggested formulations andrecommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance and information to determine to your own satisfaction whether they are suitable foryour intended uses and applications. Such testing has not necessarily been done by King Industries, Inc. ("King"). The facts, recommendations and suggestions herein stated are believed to be reliable;however, no guaranty or warranty of their accuracy is made. EXCEPT AS STATED, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS OR OTHER-WISE. KING SHALL NOT BE HELD LIABLE FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES. Any statement inconsistent herewith is not authorized and shall not bindKing. Nothing herein shall be construed as a recommendation to use any product(s) in conflict with patents covering any material or its use. No license is implied or granted under the claims of anypatent. Sales or use of all products are pursuant to Standard Terms and Conditions stated in King sales documents.NACORRNEWA4/32013