SYSTEM KAN-therm KAN-therm SYSTEM - broen-sei

More documents

Recommendations

Info

KAN-therm Push System - technical information 2Attention:For assembly of fittings made of PPSU plastic you have to use, from the fitting side, black inserts marked with a letter T (12,14, 18 or 25) and from the sleeve side straight nickel inserts. Plastic fitting should be supported against the flange directlyadjacent to stub pipe on which a sleeve is slid.straight nickel insertstraight black insertIn the case of PPSU fitting of ∅32 mm in diameter assembly use, from the fitting side, straight nickel insert ∅25 mm, and apress jaw from the sleeve side.straight nickel insert ∅25mmpress jawAssemble brass elements using straight nickel inserts.straight nickel insert- 10 -
2 KAN-therm Push System - technical informationPush toolsHydraulic Push tool with foot-operated drive - case set.214683751. Hydraulic Push tool with foot drive.2. Expanding tool for pipes PE-Xc and PE-RT.3. Cutter for pipes PE-Xc and PE-RT.4. Expanding head (12×2; 14×2; 18×2;18×2,5; 25×3,5; 32×4,4)5. Insert set (12, 14, 18, 25) - 2 pcs.6. Insert set (T12, T14; T18; T25) - 1 pcs.7. Allen's key.8. Tool case.Mechanical hand Push tool - case set.834512761. Manual mechanical Push tool2. Expanding tool for pipes PE-Xc and PE-RT.3. Cutter for pipes PE-Xc and PE-RT.4. Expanding head (12×2; 14×2; 18×2;18×2,5; 25×3,5; 32×4,4)5. Insert set (12, 14, 18, 25) - 2 pcs.6. Insert set (T12, T14, T18, T25)) - 1 pcs.7. Jaws for manual mechanical Push tool indiameter range 12-18 mm and 25-32 mm.8. Tool case.- 11 -
Page 1 and 2: SYSTEM KAN-therm KAN-thermSYSTEMinf
Page 3 and 4: KAN-therm Push SystemISO 9001 : 200
Page 5: 1 KAN-therm Push SystemKAN-therm Pu
Page 9 and 10: 2 KAN-therm Push System - technical
Page 11: 2 KAN-therm Push System - technical
Page 15 and 16: 3 KAN-therm Push System - screwed c
Page 17 and 18: 4 KAN-therm Push System - for water
Page 33 and 34: 7 KAN-therm System - screw fittings
Page 35: 8 KAN-therm System - Push toolsKAN
Page 38 and 39: ContentsPageKAN-therm Press System
Page 40 and 41: KAN-therm Press System - technical
Page 48 and 49: KAN-therm Press System 10KAN -therm
Page 50 and 51: KAN-therm Press System 10KAN -therm
Page 52 and 53: KAN-therm Press System - screw fitt
Page 54 and 55: KAN-therm System - Press tools 12KA
Page 56 and 57: ContentsPageKAN-therm System - fitt
Page 58 and 59: KAN-therm System - fittings for eur
Page 60 and 61: KAN-therm System - connections for
Page 62 and 63:
KAN-therm System - general purpose
Page 64 and 65:
KAN-therm System - manifolds 16KAN
Page 66 and 67:
KAN-therm System - accessories for
Page 68 and 69:
KAN-therm System - cabinets 18KAN -
Page 70 and 71:
KAN-therm System - cabinets 18KAN -
Page 72 and 73:
KAN-therm System - installation equ
Page 74 and 75:
ContentsPageKAN-therm Steel System
Page 76 and 77:
KAN-therm Steel System - technical
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
KAN-therm Steel System 22KAN -therm
Page 90 and 91:
KAN-therm Steel System 22KAN -therm
Page 92 and 93:
KAN-therm System - tools for Steel
Page 95 and 96:
KAN-therm Inox SystemISO 9001 : 200
Page 97 and 98:
24 KAN-therm Inox System - technica
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
25 KAN-therm Inox SystemKAN -therm
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119:
26 KAN-therm System - tools for Ino
Page 122 and 123:
ContentsPageThe underfloor heating
Page 124 and 125:
The underfloor heating of KAN-therm
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
KAN-therm Rail System - pipe fasten
Page 142 and 143:
KAN-therm NET System - pipe fasteni
Page 144 and 145:
KAN-therm System - manifolds and ac
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
KAN-therm System - underfloor heati
Page 152 and 153:
KAN-therm System - automatics eleme
Page 155 and 156:
KAN-therm SYSTEM - fastening system
Page 157 and 158:
38 KAN-therm System - fastening sys
Page 159:
38 KAN-therm System - fastening sys
Page 162 and 163:
ContentsPageIndex . . . . . . . . .
Page 164 and 165:
Index 39Code page Code page Code pa
Page 166 and 167:
Page 168:
Page 171 and 172:
KAN Sp. z o.o.ul. Zdrojowa 5116-001
show all

SYSTEM KAN-therm KAN-therm SYSTEM - broen-sei

Create successful ePaper yourself

Delete template?

Save as template?