Part #30808 GM Column Turn Signal Connector ... - Painless Wiring

2501 Ludelle StreetFort Worth, Texas 76105817-244-6898 phone817-244-4024 fax800-423-9696 ordersE-Mail: painless@airmail.netWebSite:http://www.painlesswiring.comPart #30808GM Column Turn Signal ConnectorInstallation InstructionsThis kit is for installing the mating connector for plugging the steering column wires intothe chassis turn signal wires for those columns that have been damaged or reproducedwithout an attaching plug.Attach each of the eight (8) wires coming out of the column to the terminals providedby crimping or soldering and then insert the wires into the plastic housing in the ordershown in the chart below.Note:After inserting all wires into the gray plastic housing the color codes of thecolumn wires and the color codes of the chassis wires should match. Insome instances, the color codes of the column wires are a stripe on ablack wire instead of a solid color wire.Turn Signal ConnectionGM Color Designation Turn Signal Conn. PortBlack Horn GLight Blue Left Front Turn Signal HDark Blue Right Front Turn Signal JBrown Hazard Flasher KPurple Turn Flasher LYellow Left Rear Turn Signal MGreen Right Rear Turn Signal NWhite Stop Lamp Switch PG:\SHARE\INSTRUCT\30808.doc 2/6/071

Painless Performance Limited Warrantyand Return PolicyChassis harnesses and fuel injection harnesses are covered under a lifetime warranty.All other products manufactured and/or sold by Painless Performance are warranted tothe original purchaser to be free from defects in material and workmanship undernormal use. Painless Performance will repair or replace defective products withoutcharge during the first 12 months from the purchase date. No products will beconsidered for warranty without a copy of the purchase receipt showing the sellersname, address and date of purchase. You must return the product to the dealer youpurchased it from to initiate warranty procedures.Copyright © 2007 by Perfect Performance Products, LLC2