10.07.2015 Views

Jerr-Dan MDL 280 14-Ton Independent - Twin State Equipment

Jerr-Dan MDL 280 14-Ton Independent - Twin State Equipment

Jerr-Dan MDL 280 14-Ton Independent - Twin State Equipment

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>MDL</strong> <strong>280</strong>/110<strong>MDL</strong> 320/110Custom forks and adaptersare available.Unique double-door tool storageand slide out dolliesspeed up the job.Lighted compartments holda full array of tools.


DualWinchBodyWrecker BoomModularComposite BodyLightingControls<strong>MDL</strong><strong>14</strong> TON<strong>280</strong>/110COMPOSITE BODYSTANDARD EQUIPMENT<strong>MDL</strong> 320/11016 TONTwo Stage <strong>Independent</strong>Underlift• Lifting Capacity:Retracted 28,000 lb. (<strong>14</strong> T) / 32,000 lb. (16 T)Extended<strong>14</strong>,000 lb.• Lifting Height at 45° (may vary with chassis) 191”• Boom Reach past Tail Section 76”• Boom Maximum Working Angle 45°• Boom Minimum Working Angle 0°• Wire Rope/Cable Boom Paint ProtectorsSTD• Lifting Capacity:Retracted11,000 lb.Extended8,500 lb.• Power Tilt & FoldSTD• Power Tilt-Positive Up 30°• Power Tilt-Negative Down 10°• Tie-Down ChainsSTD• Hydraulic Extension 30”• Reach (Maximum) C L Rearmost Axle to Forks C L 112”• Four Sets Underlift ForksSTD• One Set Spring Lift AttachmentsSTD• “L” Arms (5,000 lb.)STD• Cable TensionersSTD• Dual Planetary Gear Winch (capacity each winch)15,000 lb.• Airshift Free WheelSTD• Cable/Wire Rope - 6x37 Steel; IWRC 7/16” Dia. x 150’HydraulicSystemOther• Tool Compartment Lighting• Federal Standard 108 Lighting• Light Pylon with Winch Light• Lower Hookup Lights (Rubber) Pair• Hydraulic Valve with Variable Flow Control• System Pressure• Tandem, Gear Driven Pump-System Protection Relief• Reservoir with Sight Gauge, Fluid Cut-Off’s and MagneticClean Out Plugs• Two 10 Micron Return Line Filters• Remote Pendant Plug-In Controls All Underlift Functions• PTO/Dual Pump combination with Cable Shift• Manual Controls-Fully Proportional-Both sides• Aluminum Sub-Structure with Composite Panels• <strong>Independent</strong>ly Rubber Shock Mounted• Built-In Tool Storage and Chain Racks• Six Recovery Anchors-Each side• Stainless Steel Paddle Latches• Gas Door Closures• 60” Crossover Box with Double Doors• Alloy Steel Safety Chains with Storage Pockets• Mud FlapsSTDSTDSTDSTDSTD3,000 psiSTDSTDSTDSTDSTDSTDSTDSTDSTDSTDSTDSTDSTDSTDSTDOPTIONAL EQUIPMENTLIghting• 108” CA = 56” Body + 49” Crossover Box• 138” CA = 56” Body + 49” Crossover Box + 30” Tunnel Toolbox• 150” CA = 56” Body + 60” Crossover Box + 30” Tunnel Toolbox• 8,000 lb. Towbar with Chains• Hydraulic Controlled Rear Stabilizers with Multiple Position Spade 45°or 90°• Manual Controlled Rear Stabilizers with Multiple Position Spade 45°or 90°• Medium-Duty Tow Package (Air Hookup, Gland Hands and 7 Way Plug)• Paint• High Visibility Light Bar with Stop and Turn Signals• Switch Panels (9-6 switches)• Emergency Light Package• Upper Work Lights• Upper and Lower Hookup Lights• Deluxe Work Lights• Various Directional Lights AvailableOther ControlsUnderlift• In-Cab Underlift Controls (6-9) (Not Available With Radio Remote)• Control Cover• 7,500 lbs. Medium-Duty Tire Lift Attachment• Custom Forks and Adapters• Trailer Towing Packages• Pintle Hook with Ball Type-- 3,000 lbs. Vertical Lift Capacity16,000 lbs. Gross Trailer Weight• Bolt-On Ball Adapter--5,000 lbs. Gross Trailer Weight• Towing Chains-1/2” dia. x 96” long-High Test-1 Pair• Snatch Block (6” Sheave, each)• Factory Frame Stretch and Installation• Inside Sliding Storage and Axle Holder for Dollies• Steering Wheel Clamp• Chain Lift AdapterChassisUNDERLIFT SPECIFICATIONSA. Center-line of Rear Axle to TailboardB. Tailboard to Center-line of ForkC. Tailboard to Center-line of ForkD. Tailboard to Center-line of Wheel GridE. Tailboard to Center-line of ForkF. Tailboard to Center-line of “L” ArmRECOMMENDED CHASSIS REQUIREMENTS• Minimum GVW Rating28,000 lbs.• Minimum Cab-To-Axle 108”• RBM Each Frame Rail850,000 in/lbs.INCHES35”41”47”77”77”84”WEIGHT11,000 lbs11,000 lbs7,500 lbs8,500 lbs5,000 lbs• Minimum Chassis Requirements (Cab-To-Axle)Front Axle Minimum GAWR8,000 lbs.Rear Axle Minimum GAWR20,000 lbs.• Maximum Frame Height 41”Note: All Import Chassis and automatic transmissions require factory quote. A heavy-duty suspension is recommended. Certain air suspensions may be incompatible with this model.41”28,000 <strong>14</strong>,0006”76”11,0008,500 (Grid)7,500 (Forks)5,000(L-ARM)77”**Tow Rating24,500 lbs**The Tow Rating of your Recovery <strong>Equipment</strong> is limited to the actual GVWR (Gross Vehicle Weight) Rating of yourRecovery Vehicle. For example, the GVWR of your Recovery Vehicle should not be exceeded by the GCW (GrossCombined Weight) of both Towing and Towed Vehicles. This is the Actual Weight of the Towing Vehicle plus the TowedVehicle(s) including payload, driver, passenger(s), and fuel. (Everything that moves with your equipment)ABCDEFPatents: 5,782,596 & 5,839,775 and Other Patents PendingThe payload-carrying capacity of any truck is determined by the GVWR of the cab chassis. It is importantthat you determine that your truck has satisfactory carrying capacity and axle ratings for your specificapplication. <strong>Jerr</strong>-<strong>Dan</strong>’s® authorized sales representatives are available to assist you in this regard.Specifications subject to change without prior notification. Some equipment shown may be optional.6/021080 Hykes Road•Greencastle, PA 172251-800-926-9666www.jerr-dan.com

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!