Elips30 Leviton 30 Degree Spot Light - Alectro Systems Inc.

5/50 Ellipsoidal - 30˚650-035............................Features• Insulated handle centers lamp within reflector• Lamp housing secured by bottom insulated handle• Peak/Flat fields easily achieved by moving lamphousing within reflector housing• Lamp housing removes completely for easylamp replacement• Yoke hardware includes positive locking clutch diskfor tilt control• Shutters equipped with thermal insulated fingerholes• Lens tube moves outside of shroud and is securedby top insulated handle• Rugged DIE-CAST lens tube mounts ALL 4-1/2AND 6” diameter lens. Includes integral colorframe holder• Achieves 20˚, 30˚ or 40˚ by relocating lenses5/50 Ellipsoidal - 30˚BCADimensional Data – in. [cm] lbs.[kg]A 15.0 [38.10]B 25.5 [64.77]C 28.0 [71.12]Weight 20.9 [9.48]US Patent 4,187, 534P.O. Box 2210 • Tualatin, Oregon 97062 Phone: (503) 404-5500 • Fax: (503) 404-5600Copyright © 1995, 2002, Leviton Mfg. Co. Inc.

5/50 Ellipsoidal - 30˚650-035............................Specifications• Housing shall be constructed of die-castaluminum, sheet steel and aluminum, with ahigh temperature black finish.Mechanical• Optical Train consists of a medium two-pinsocket accommodating 500-1000 watt tungstenhalogen lamps, specular Alzak ® double-flattedelliptical reflector and plano convex lense(s) oflow expansion, borosilicate glass. Lensconfiguration 1-(4-1/2" x 9", 6”x 9”) will providea field angle of 30˚.• The gate assembly contains four adjustablenickel/chromium stainless steel framing shuttersand a pattern slot. Each shutter operates in anindependent plane, with plus or minus 30˚ ofrotation throughout the gate. Maximum angularrotation between adjacent shutters is 120˚.Shutter blades are equipped with thermallyinsulated handles with fingerholes. Optionalcustomer-installed Iris assembly is available.• The socket assembly is designed for a rapidfilament alignment by use of a thermoplasticfocus handle on socket housing which permitsprecise peak/flat field control. The entireassembly may be removed without tools forlamp replacement.• Socket shall be precision type TP-22 ULrecognized, steatite insulated, die-cast aluminumconstruction rated 600 volts, 1000 watts, 250˚C,continuous operation. Lamp seal temperatureswill not be exceeded.• Performance with 1000 watt, 200 hour 3200˚klamp shall be 154,000 beam candlepower with30˚ field, as shown in reference chart.• Mounting unit is provided with heavy steelyoke, painted malleable iron C-Clamp for up to2" I.D. pipe with a tapped and threaded hangerpin. Fixtures will rotate vertically through theyoke for simple focusing.Electrical• The electrical unit shall be provided with 36"3-wire VHT leads, with connector as specified byoption number.DescriptionCat. No.Ellipsoidal unit with3-wire lead only 650-035Same with 20 amp, 2-pole, 3-wiregrounding pin connector OPT-00002Same with 3-wire U-Gnd(household) connectorNEMA 5-15Same with 20 amp, 2-pole,3-wire twistlockNEMA L5-20PSame with variation onstandard (describe)OPT-00004OPT-00006OPT-00007AccessoriesCat. No.Color Frame 120-005Pattern Holder 138-003Iris Kit 138-009Safety Cable 138-059C-clamp for 1-2" ID pipe 158-003Glass Pattern Holder 1-9201Peak FocusIllumination at 385 171 96 62Beam Center (footcandles)Field Diameter (feet) 10.8 16.2 21.6 27.0Distance (feet) 20 30 40 50Donut 120-060LampsCat. No.1000W, ANSI-FEL, 3200˚K,300 Hrs., 1.0 Multiplier 176-033Distance (meters) 7 11 15 19Field Diameter (meters) 3.8 5.9 8.1 6.3Illumination at 3143 1273 684 427Beam Center (lux)Photometric Performance• 5/50 Series 30˚ Ellipsoidal w/1000W Lamp No. 176-033, FEL• For illumination from any distance, divide candlepower by the distance squared• For field diameter at a specific distance, multiply field multiplier by distanceField Angle Beam Angle Candlepower Field MultiplierPeak (Cosine) Peak (Cosine)30˚ 11.0(20.0˚) 154,000(118,000) .54Beam Angle(50% of max. int.)Field Angle(10% of max. int.)750W, ANSI-EHG, 3200˚K,500 Hrs., .75 Multiplier 176-185750W, ANSI-EHF, 3200˚K,2000 Hrs., .56 Multiplier 176-187500W, ANSI-EHC/EHB, 3200˚K,500 Hrs., .50 Multiplier 176-029500W, ANSI-EHD, 3200˚K,2000 Hrs., .35 Multiplier 176-031575W, ANSI-FLK/HX600, 3200˚K,300 Hrs., .81 Multiplier 176-200575W, ANSI-HX601, 3200˚K,2000 Hrs., .63 Multiplier 176-6011000W, ANSI-FEP, 3200˚K,250 Hrs., .63 Multiplier 176-0961000W, ANSI-FEP, 3200˚K,250 Hrs., .63 Multiplier 176-095Specifications subject to change without noticeLiterature # 008-MKCTN-000P.O. Box 2210 • Tualatin, Oregon 97062 Phone: (503) 404-5500 • Fax: (503) 404-5600Copyright © 1995, 2002, Leviton Mfg. Co. Inc.