®A700 - Series - Sherborne Sensors

Schaevitz ® A700 - SeriesDC-Operated,Single and Dual Axis AccelerometerGeneral Specification for -0001 (and -0101 before error correction)Full Scale Acceleration 0.5 1 2 5 ± gSignal OutputAnalogFull Scale Output ±1.000 ± 0.020 ±2.000 ± 0.040 VoltsZero Offset Voltage 2.5 ± 0.1 VoltsNon-linearity < ± 0.5 %FSOBand Width (nominal) 800 Hz (-3dB)Rise Time < 1 SecondWarm Up Time < 60 SecondsPower Supply +6.5 to 18 Volts DcPower Dissipation < 30 mWElectrical Connection Integral cable 500mm longWeight < 50 GramsCompensated Temperature Range -18 to +70 Degrees COperating Temperature Range -25 to +85 Degrees CThermal Zero Shift 0.03 %FRO/°CThermal Sensitivity 0.03 %Reading/°CMechanical Shock > 3500 g (0.5mS, ½ sine)Humidity/ImmersionIP55Insulation Resistance > 100 MΩ @ 25 volts dcAdditional Specification for -0101 (after error correction)Accuracy X-Axis < ± 1 milli gAccuracy Y-Axis < ± 1 milli gTemperature Output 1 µA / kelvinCharacteristic error correction equation supplied with each unit for each axisAcceleration (g) =(V - AT + C)G × (BT + D)+Ewhere V and T are voltage and temperature outputs respectively from the accelerometer, andA, B, C, D, E and G are calibration constants.Self-Test FeatureThe sensor is fitted with a self-test feature. When activated by applying 5 volts to theself-test connection the output will change by approximately 4 volts.DESIGNATION & ORDERING CODESeries Number1 - Single Axis2 - Dual Axis0 – Standard1 – TemperatureCharacterisationincluded0.5 - ±0.5g1 - ±1.0g2 - ±2.0g5 - ±5.0gA 7 0 - 0 0 1 - G1 Ringway Centre, Edison Road, Basingstoke, Hampshire, RG21 6YH, United KingdomTel: +44 (0) 870 444 0728 Fax: +44 (0) 870 444 0729 Email: sales@sherbornesensors.comWebsite: www.sherbornesensors.comA700 Series - Iss 4.doc