Operating instructions - EWM Hightec Welding GmbH

Machine description – quick overviewInside view4.3 Inside viewItem Symbol Description 0Figure 4-31 Label, Wire feed parts subject to wear2 Wire spool holder3 Wire feed unit4 Key button, Gas testCurrentless gas test5 Changeover switch for machine operation (operating point)The operating point (wire speed/welding voltage) can be set at the wire feed unitcontrol, with a remote control or using an up/down welding torch.Set operating point with up/down welding torch.Set operating point at the wire feed unit control or remote control (standard).6 Changeover switch, remote control on/offON Set the welding performance via the remote controlOFF Set the welding performance via the machine control7 Button, Wire inchingFor inching the wire electrode when changing the wire spool.The welding wire is inched into the tube package with the current off and without thegas being expelled.18099-005208-EW50110.04.2014