SK-S12(X) Series and ZK-S12(X) Series User's Manual

More documents

Recommendations

Info

Getting Started3Click the “Next >” button.7. Depending on your Windows settings, the following warning mayappear.iNote: this warning is related to the fact that the USB driverused by the Starter Kit is not digitally signed by Microsoft,and Windows considers it to be potentially malfunctioningor dangerous for the system. However, you can safelyignore the warning, since every kind ofcompatibility/security test has been carried out by SofTecMicrosystems.Page 20
SK/ZK Series User's ManualClick the “Continue Anyway” button.8. Windows will install the driver files to your system. At the end of theinstallation, the following dialog box will appear.3Click the “Finish” button to exit from the “Found New HardwareWizard” procedure.9. The Starter Kit’s USB driver is now installed on your system.3.6 Application TutorialThis section will provide a step-by-step guide on how to launch your projectand get started with the CodeWarrior user interface.1. Ensure that the Starter Kit is connected to the PC (via the USB cable)and that the board is powered.2. Make sure that all of the Starter Kit’s jumpers are set to their factoryposition (see the “Summary of Jumper and Connector Settings” sectionin the Starter Kit’s specific manual).3. Start CodeWarrior Development Studio by selecting “Start > Programs> SofTec Microsystems > SK and ZK-S12(X) Series > CodeWarriorDevelopment Studio”. CodeWarrior Development Studio will open.Page 21
Page 1: SK-S12(X) SeriesZK-S12(X) SeriesSta
Page 4 and 5: We want your feedback!SofTec Micros
Page 6 and 7: Contents3.4 Installing the Software
Page 9 and 10: SK/ZK Series User's Manual1 Overvie
Page 11 and 12: SK/ZK Series User's Manual1.3 CodeW
Page 13: 2 Hardware FeaturesSK/ZK Series Use
Page 17 and 18: SK/ZK Series User's Manual3 Getting
Page 19 and 20: SK/ZK Series User's Manual3.3 Host
Page 21: SK/ZK Series User's Manual1. Instal
Page 25 and 26: SK/ZK Series User's Manual36. From
Page 27: SK/ZK Series User's Manualfeatures,
Page 30 and 31: Debugging Features4First, ensure th
Page 32 and 33: Debugging Features44. On the CodeWa
Page 34 and 35: Debugging Features4.4.4 “WAIT”
Page 36 and 37: Debugging Features4.5 DataBlaze Pro
Page 38 and 39: Debugging Features• In the “Aut
Page 40 and 41: Troubleshooting55.1.2 Communication
Page 44: Copyright © SofTec Microsystems®.

SK-S12(X) Series and ZK-S12(X) Series User's Manual

Create successful ePaper yourself

Delete template?

Save as template?