Stripdown of the HW97K and installation of a venom kit - Cape Air Rifle

More documents

Recommendations

Info

- remove the underlever carefully, don't put any force on the cocking shoe as it israther fragile.- carefully remove the cocking shoe from the compression tube, don't useexcessive force.
- the anti-bear trap system is set free as well, don't forget to install it againlater on. If you want to be able to decock the HW97K, don't install the anti-beartrap again, but be carefull when loading the gun if you don't want to lose anyfingers.- time to remove the trigger housing block. Often it is very tight. Find a metalbar that fits nicely in the sleeve and hit it with a hammer. Put some rags aroundthe bar to avoid damaging the action.
Page 1 and 2: Stripdown of the HW97K and installa
Page 3: - don't loose the small screw at th
Page 6 and 7: - after removal of the 2 pins, the
Page 8: - pay attention not to lose that ti
Page 13 and 14: experience or don't feel comfortabl
Page 15 and 16: - time for a new and better piston
Page 17 and 18: ... and off it goes.- all parts are
Page 19 and 20: - the seal and piston are treated w
Page 21 and 22: - with the spring completely tarred
Page 23: - complete the re-installation and

Stripdown of the HW97K and installation of a venom kit - Cape Air Rifle

Create successful ePaper yourself

Delete template?

Save as template?