EU-SICHERHEITSDATENBLATT Heizöl S - Solid Fuel ABSCHNITT ...

Heavy Fuel Oil Components9.9. Use of Heavy Fuel Oil in Road and Construction Applications– Professional9.9.1. Exposure ScenarioSection 1 Exposure Scenario Title Heavy Fuel OilsTitleUse in Road and Construction ApplicationsUse DescriptorSector(s) of Use 22Process Categories8a, 8bFurther information on the mapping and allocation ofPROC codes is contained in Table 9.1Environmental Release Categories8d, 8fSpecific Environmental Release Category ESVOC SpERC 8.15.v1Processes, tasks, activities coveredCovers the use of surface coatings and binders within closed or contained systems, includingincidental exposures during material transfers and filling operations.Assessment MethodSee Section 3.Section 2 Operational conditions and risk management measuresSection 2.1 Control of worker exposureProduct characteristicsPhysical form of product LiquidVapour pressure (kPa) Liquid, vapour pressure 20°C above ambientConditions affecting temperature). OC7. Assumes a good basic standard of occupationalexposurehygiene is implemented G1.Contributing Scenarios Specific Risk Management Measures and Operating ConditionsGeneral measures(carcinogens) G18CS3 Material transfersCS39 Equipment cleaningConsider technical advances and process upgrades (includingautomation) for the elimination of releases. Minimise exposure usingmeasures such as closed systems, dedicated facilities and suitablegeneral / local exhaust ventilation. Drain down systems and clear transferlines prior to breaking containment. Clean / flush equipment, wherepossible, prior to maintenance.Where there is potential for exposure: Restrict access to authorisedpersons; provide specific activity training to operators to minimiseexposures; wear suitable gloves and coveralls to prevent skincontamination; wear respiratory protection when its use is identified forcertain contributing scenarios; clear up spills immediately and dispose ofwastes safely. Ensure safe systems of work or equivalent arrangementsare in place to manage risks. Regularly inspect, test and maintain allcontrol measures. Consider the need for risk based health surveillance.G20Ensure material transfers are under containment or extract ventilationE66 Avoid carrying out activities involving exposure for more than 15minutes OC26. Limit the substance content in the product to 1 % OC16.Wear chemically resistant gloves (tested to EN374) in combination withintensive management supervision controls PPE18.Drain down and flush system prior to equipment break-in or maintenance2010-08-10 CSR 148