Technical Manual - ODYSSEY Batteries

More documents

Recommendations

Info

Watts or amps per 12V unitPC1800-FT performance data at 25°C, per 12V module Time Watts(W)10000100010010WattsAmps10.01 0.10 1 10Hours to 10.02V @ 25ºC (77ºF)100Amps(A)Capacity(Ah)Energy(Wh)ENERGY AND POWER DENSITIESW/liter Wh/liter W/kg Wh/Kg2 min 4422 491.4 16.4 147.4 199.6 6.7 73.7 2.55 min 4422 491.2 40.9 368.5 199.6 16.6 73.7 6.110 min 4422 454.7 75.8 737.0 199.6 33.3 73.7 12.315 min 3984 373.3 93.3 996.0 179.8 44.9 66.4 16.620 min 3384 312.7 104.2 1128.0 152.7 50.9 56.4 18.830 min 2610 238.3 119.2 1305.0 117.8 58.9 43.5 21.845 min 1968 177.8 133.4 1476.0 88.8 66.6 32.8 24.61 hr 1590 143.1 143.1 1590.0 71.8 71.8 26.5 26.52 hr 936 82.2 164.4 1872.0 42.2 84.5 15.6 31.23 hr 666 58.3 174.9 1998.0 30.1 90.2 11.1 33.34 hr 522 45.4 181.6 2088.0 23.6 94.2 8.7 34.85 hr 426 37.3 186.5 2130.0 19.2 96.1 7.1 35.58 hr 282 24.6 196.8 2256.0 12.7 101.8 4.7 37.610 hr 234 20.2 202.0 2340.0 10.6 105.6 3.9 39.020 hr 126 10.9 218.0 2520.0 5.7 113.7 2.1 42.0Watts or amps per 12V unit31-PC2150 & 31M-PC2150 performance data at 25°C,per 12V module100001000100101WattsAmps0.01 0.1 1 10Hours to 10.02V @ 25ºC (77ºF)100TimeWatts(W)Amps(A)Capacity(Ah)Energy(Wh)ENERGY AND POWER DENSITIESW/liter Wh/liter W/kg Wh/Kg2 min 7025 678.5 22.4 231.8 515.3 17.0 199.0 6.65 min 4740 438.5 36.4 393.4 347.7 28.9 134.3 11.110 min 3176 285.9 47.7 530.4 233.0 38.9 90.0 15.015 min 2428 215.5 53.9 607.0 178.1 44.5 68.8 17.220 min 1980 174.1 58.0 659.2 145.2 48.4 56.1 18.730 min 1460 127.0 63.5 730.0 107.1 53.5 41.4 20.745 min 1059 91.2 68.4 793.9 77.6 58.2 30.0 22.51 hr 835 71.5 71.5 835.2 61.3 61.3 23.7 23.72 hr 461 39.0 78.0 922.2 33.8 67.7 13.1 26.13 hr 322 27.1 81.4 966.8 23.6 70.9 9.1 27.44 hr 249 20.9 83.8 996.8 18.3 73.1 7.1 28.25 hr 204 17.1 85.6 1020.0 15.0 74.8 5.8 28.98 hr 134 11.2 89.7 1070.4 9.8 78.5 3.8 30.310 hr 110 9.2 91.9 1095.9 8.0 80.4 3.1 31.020 hr 60 5.0 100.3 1191.9 4.4 87.4 1.7 33.8PC2250 performance data at 25°C, per 12V moduleTime Watts Amps Capacity Energy Energy and power densities(W) (A) (Ah) (Wh) W/liter Wh/liter W/kg Wh/kgWatts or amps per 12V unitWatts Amps1000010001001010.01 0.1 1 10 1002 min 7090 671.6 22.4 236.1 1143.0 14.75 181.8 6.15 min 4820 443.8 37.0 401.5 301.2 25.1 123.6 10.310 min 3291 296.4 50.4 559.5 205.6 35.0 84.4 14.415 min 2553 227.1 56.8 638.3 159.5 39.9 65.5 16.420 min 2107 185.8 61.3 695.3 131.7 43.5 54.0 17.830 min 1583 137.9 69.0 791.5 98.9 49.5 40.6 20.345 min 1170 100.9 75.7 877.5 73.1 54.8 30.0 22.51 hr 937 80.2 80.2 937.0 58.6 58.6 24.0 24.02 hr 536 45.2 90.4 1072.0 33.5 67.0 13.7 27.53 hr 382 32.0 96.0 1146.0 23.9 71.6 9.8 29.44 hr 299 25.0 100.0 1196.0 18.7 74.7 7.7 30.75 hr 247 20.6 103.0 1235.0 15.4 77.2 6.3 31.78 hr 165 13.8 110.4 1320.0 10.3 82.5 4.2 33.910 hr 137 11.4 114.0 1370.0 8.6 85.6 3.5 35.120 hr 76 6.3 126.0 1520.0 4.75 95.0 2.0 39.0Hours to 10.02V @ 25˚C (77˚F)10 www.odysseybattery.comPublication No: US-ODY-TM-001 - April 2011
®Peukert’s ExponentThe capacity of a battery depends on the rate at which itis discharged. For example, the ODYSSEY ® 31-PC2150battery is rated at 92Ah when discharged at the 10-hourrate (9.2A for 10 hours) and 100Ah when discharged at the20-hour rate (5.0A for 20 hours). This variability in batterycapacity makes it problematic to estimate the support timeone can expect for a given current draw. This is where thePeukert equation, shown below comes in handy.Capacity = I n x tlog T 2 – log T 1n = ------------------––––––log I 1 – log I 2In the first equation, n is called the Peukert’s coefficient;I 1 and I 2 are two discharge current rates and T 1 and T 2 arethe corresponding discharge durations. Knowing the ratedcapacity of the battery and the coefficient (given in the tablebelow) one can use this equation to estimate the batterysupport time for a given amp draw.Suppose you have a 15A load you want to run off theODYSSEY 31-PC2150 battery, which is rated at 92Ah andyou want to know approximately how long it will supportthe load. From the table below, n is 1.112 for the Group 31battery; its capacity is 92Ah and I is 15A. Substituting thesevalues into the Peukert equation yields a support time t ofabout 4-1/2 hours before the battery is fully depleted.Table 1ODYSSEY ®Battery ModelPeukertCoefficientODYSSEY ®Battery ModelPeukertCoefficientPC310 1.072 PC1350 1.147PC535 1.078PC545 1.10725-PC1400(all variations)34-PC1500(all variations)1.0341.133PC625 1.107 PC1700 1.091PC680 1.129 65-PC1750 1.081PC925 1.100 PC1800-FT 1.150PC1200 1.10631-PC2150(all variations)1.112PC1220 1.132 PC2250 1.18075-PC1230(all variations)1.074Cycle life and depth ofdischarge (DOD)Applications in which the battery is frequently dischargedand recharged are called cyclic. A complete cycle starts witha charged battery that is discharged and then brought backto a full charge. Battery life in these applications is stated asthe number of cycles the battery will deliver before its capacitydrops to 80% of its rated value. For example, suppose abattery is rated at 100 amp-hours (Ah) and has a publishedcycle life of 400. This means that the battery can be cycled400 times before its delivered capacity drops to 80Ah.Proper charging and DOD are the two key factors thatdetermine how many cycles a battery will deliver before itreaches end of life. The DOD is simply the ratio of capacityextracted from the battery to its rated capacity expressedas a percentage. If a 100Ah battery delivers 65Ah and thenrecharged it is said to have delivered a 65% DOD cycle.The relationship between DOD and cycle life for ODYSSEYbatteries is shown in Figure 1. The lower the DOD the higherthe number of cycles the battery will deliver before reachingend of life.Figure 1Number of cycles1000000100000100001000100Charge profile: Full recharge at 14.7V with a 1C current limitDepth of discharge, DOD %The true dual purpose design of ODYSSEY batteriesis reflected in the cycle life results shown in the graphbelow. The two ODYSSEY 65-PC1750 battery sampleswere discharged at 25A (the reserve capacity rate) for 108minutes (80% of 135 minutes, which is the 100% rate for thisbattery), rested for an hour then charged for 5 hours at 14.7Vwith a 50A current limit. Since five hours are not sufficient tocharge them completely, both batteries were given 20-hourcharges every ten cycles. Sample 1 cycled 581 times andSample 2 lasted 544 cycles before reaching end of life.Some battery monitoring systems (BMS) offer the optionof entering the Peukert coefficient so that the BMS canestimate the time left for the battery to be fully dischargedat a given discharge rate. If you have such a system, youcan use the table above to find the value of your batterymodel. An important point to keep in mind here is that thisestimation is valid only for an ambient temperatureof 25°C (77°F).Run Time in Minutes14012010080604020End of Life - Sample 1 - Cycle 581 / Sample 2 - Cycle 544www.odysseybattery.com00 50 100 150 200 250 300 350 400 450 500 550 600 650CyclePublication No: US-ODY-TM-001 - April 201111
Page 4 and 5: Extended discharge characteristicsI
Page 6 and 7: Watts or amps per 12V unitPC680 & E
Page 8 and 9: Watts or amps per 12V unit75-PC1230
Page 12 and 13: Float lifeFloat life refers to the
Page 14 and 15: Extreme cold temperature performanc
Page 16 and 17: Another class of chargers is design
Page 21 and 22: ®Is the ODYSSEY ® battery a dry b
Page 23 and 24: ®Noteswww.odysseybattery.comPublic

Technical Manual - ODYSSEY Batteries

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?