general notes chain link safety fence-new structures general notes

cL of PostcL of Pipe2’-9’’cL of Top Rail1.660’’ O.D. pipe,weighing 3.00 #/ft.’’ x ’’4’-9 ’’Stretcher Bar2’’-#6 gauge chainlink fence screen.Attach Anti-climb shield tofence post by small sectionsof pipe to each vertical postwith fillet weld.Pipe connector to be shapedto have full contact witheach post.4’-8’’Stretcher BarAttachment (Typ.)spaced as shown.’’ plate-see DETAIL BTop of ParapetBAcL of Bottom RailBwith hex. nuts and washers’’ anchor stud withhex. nut and washer(@ each end) or ’’hex. head anchor bolt(head down) with hex.nut and washer.*hex. head anchor bolt(head down) with hex.nuts and washers.F-Shape Parapet*Vertical Parapet*As an option, the Contractor may set theanchor studs after placing concrete barrierusing ’’ dia. cored holes and an approvedepoxy grout. Nuts and washers shall be omittedfrom the embedded ends of anchor studs. Noadditional compensation will be allowed for thisoption.Note:For Sections A-A and B-B see Sheet2 of 2 of this standard.FHWA APPROVALDATE: 10-3-80DATE:SHA1-11-883-13-017-26-019-2-03APPROVAL6/3/76REVISIONSDIRECTOROFFICE OF STRUCTURESFHWA6-8-90Note:TYPICAL SECTIONScale: ’’= 1’-0’’Straight back parapet shown, see TypicalSection for exact configuration.STATE OF MARYLANDDEPARTMENT OF TRANSPORTATIONSTATE HIGHWAY ADMINISTRATIONOFFICE OF STRUCTURESANTI-CLIMB SHIELD FORCHAIN LINK SAFETY FENCES TYPES I AND I ISTANDARD NO. BR-SS(3.05)-75-25SHEET 1 OF 2SUPER-FENCING NEW STRUCT.