Stahlwille aerospace. Tool solutions for aerospace.

Applying a correct torque. It is as easy as that.Torque tools.Applying the correct torque to a fastener is essential formany of today’s high-tech products and applications toavoid the risk of damage or failure. Tightening and looseninghas become a governed science in its own right.Stahlwille torque tools make the science simple again.STAHLWILLE torque tools allow you to precisely apply theright torque when tightening fasteners. They also increaseproductivity, thanks to their ease of use and theirQuickRelease safety lock, which enables you to rapidlychange insert tools.Manoskop® 7141 Patented electromechanical torque/angle wrench(Type I & Type II)1 Can be used as a click and indicating torque wrench1 Measurement ranges from 1-1000 N m1 Angle measurement without reference arm,can be ratcheted1 Measurement values can be saved and exported (softwareand cable included) inclusive of time and date stamp1 User programmable interface: configurable direct modeat the wrench or set presets via software1 Settings and sequences can be easily configured and stored1 Advance warning points via visual, tactile and aural signals1 Side mounted LEDs for visual indication when the displaycan not be seen1 Large multi-colour high resolution OLED display1 Audit functions for optimized use of torque and anglecapabilities1 Multiple languages supported1 Password protection1 Accurate to +/-2% or 1°1 Optionally: Lithium-Ion battery and chargerSensotork® 713R1 Electronic indicating torque/angle wrench (Type I)1 Angle measurement without reference arm, can be ratcheted1 Measurements values can be saved and exported1 Automatic force application lever arm compensation1 User programmable interface: both at the wrench orvia software1 Settings and sequences can be easily configured and used1 Advance warning points via visual, tactile and aural signals1 Large easy read display for both text and numbers1 Multiple languages supported1 Password protection1 Accurate to +/-1% or 2°Manoskop® 730D1 Patented electromechanical torque wrench (Type I & Type II)1 Combines a precise electronic measurement with theclassic mechanical click1 Can be used as a click and indicating torque wrench1 Easy to read and backlit display alerts red or green basedon user defined tolerances1 Measure and record values inclusive of time and date stamp1 Data can be transferred via optional software andUSB-Adaptor1 Ergonomic 2-component handle1 Accurate to +/-2%1 Angle measurement via optional 7395-1 adapterManoskop® 730N / 7301 Simple to adjust and use1 Exceptionally robust and durable1 The switching mechanism wears in, not out1 Measurement ranges from 2-800 N m1 No need to reset to zero when not in use – no coil spring1 Can be calibrated without disassembly1 Positive and detectable click even at the lowest of settings1 Easy to read and set dual scale with micrometer fineadjustment (730N)1 Lightening fast to set slide scale (730)1 Accurate to +/-3% (730N), +/-4% (730)36