Peltor Lite-Com II - Lp3

Peltor Lite-Com II

On/OffSwitches the headset on and off.UP (+)Increases the level ofthe selected function.DOWN (-)Decreases the level of theselected function.MODEFunction key for selecting betweenthe functions in the menu.SETMemory key for fourmemory slots.PTTSpeech button for transmittingthrough the Lite-Com radio.PTT AUXSpeech button for transmitting through externalcommunication equipment.Lite-Com II with headbandLite-Com II with attachmentfor hardhatTECHNICAL DATAFrequency:Channels:Channel steps:Deviation:Output:Range:Traffic method:Power consumption:Usage time:Battery:Weight including batteries:LPD 433433,075-434,775 MHz6925KHzMax. ±6 kHz10 mW ERPOutdoors about 1,000 metresdepending on conditionsSimplexStand-by and reception 40 - 90 mATransmission, approx. 190 mA10---35 hours (depending on type ofbattery and usage)2 st 1,5 V AAHeadband 390 g MT7H7A430 EUHelmet version 410 g MT7H7P3E430 EUPMR 446446.00625 - 446.09375 MHz812,5KHzMax. ±2,5 kHz150/25 mW ERPOutdoors about 2,000 metresdepending on conditionsSimplexStand-by and reception 40 - 90 mATransmission, approx. 180 mA (lowpower), approx. 250 mA (high power)10---35 hours (depending on type ofbattery and usage)2 st 1,5 V AAHeadband 390 g MT7H7A440Helmet version 410 g MT7H7P3E440SPARE PARTS AND ACCESSORIESHygiene kit – HY79Easy-to-replace hygiene kit.Clean – single-use protectors – HY100APackages of 100 pairs, which are easy to apply tothe ear cushions.Microphone protector – HYM1000Moisture, wind and hygienic protection for thespeech microphone. Packages of 5 metres, approx.50 replacements.Wind protection for speech microphone – M40/1Effective protection from wind hiss.One per package.Wind protection for ambient-noise microphones – M60/2Effective protection from wind hiss. One pair perpackage.Battery cover – 1173 SVBattery cover of rugged polypropylene.Connection cables for external equipmentFL6S for mobile phones, with moulded 2.5-mmstereo plug.FL6T for other equipment, with moulded 3.5-mmstereo plug.Attenuation values, headband versionAttenuation values, helmet combinationsThe Peltor Lite-Com II is tested and approved as a hearing protector according to PPE directive 89/686/EEC andapplicable parts of the European EN352-1:1993/prEN 352-3 standard.

Peltor Lite-Com IIReliable communication innoisy environmentsPilots, race car drivers and rescuers are not the onlypeople whose lives are at risk when they lose contactwith the people who give them instructions. Reliablecommunication between workers is a necessityat all workplaces to meet demands for safetyand effectiveness. Noisy environments often makeit impossible to communicate without special equipment.This makes the communication equipment evenmore important. You must be able to communicatewith your colleagues, both near and far. At the sametime, you must be able to hear machine noises –engine revs, things that “sound wrong”, alarms andwarning cries – without endangering your hearing.

Combines safe communicationwith the best hearing protectionThe Peltor Lite-Com II was designed for you and your colleagues.It gives nearly unlimited opportunities for communication while protectingyou against harmful noise. Everything that makes this possibleis built into a headset that you wear just like a regular hearing protectoron your head or helmet. This gives first-class contact with your surroundingsand effectively protects your hearing in noisy environments.Some valuable characteristics• Built-in licence-free communication radio.• Stereo active-volume function lets you listento the environment while protecting youfrom harmful noise.• Allows mixing between radio communicationand ambient noise.• Can be used as a headset for anexternal com radio or mobile phone.• Battery-saving function meanslonger usage time.• Charging jack for easy batterycharging (if rechargeable batteriesare used).• Automatic shut-off after 2 hours ifno function is activated.• Setting levels are confirmed with avoice message and displayed on an LCD.• The latest settings are stored at shut-off.P018239 Peltor Support, DB1LC-GBCopy: Holmgren Kommunikation ABPeltor® is a registered trademark of Peltor AB. Member of BPS. © Peltor AB 1999.Peltor is always in the process of product development and we reserve the right to implementchanges in our product range without prior notice.Peltor ABBox 2341, SE–331 02 Värnamo, SwedenTel +46 (0)370-69 42 00, Fax +46 (0)370-149 02e-mail: info@peltor.se, www.peltor.se