DRY-BATH INCUBATOR MODELS I-G35, I-G55, I-120 ... - Mesa Labs

More documents

Recommendations

Info

OperationPlug the incubator power cord into power source and into incubator.Monitor temperature indicator strip (current temperature indicated by illuminationof the background to a green color) located on the aluminum block (underneaththe plastic rack for ProSpore and ProSpore2 units) to ensure preset temperaturehas not changed during shipment or due to climatic conditions.WARNINGDISCONNECT FROM POWER SOURCE BEFORE CLEANING OR SERVICING6
TroubleshootingPROBLEMREMEDYPower indicator light does notcome on.Check that the unit is plugged in.Check power source.Thermal fuse has blown andrequires manufacture repair.Orange heating elementindicating light does notilluminate.Incubator heating element is outand requires manufacturer repair.Unit does not heat to incubationtemperature.Return to manufacturerUnit heats above incubationtemperature.Return to manufacturerNOTE:There are no serviceable parts. Return unit to manufacture for repair if remedycan not fix the problem, or call technical support at 1-800-728-5702.WARNINGRISK OF ELECTRICAL SHOCK- NO USER SERVICABLE PARTS LOCATEDINSIDE ENCLOSER-DO NOT USE IF UNIT IS SUSPECTED TO BE DAMAGEDOR UNSAFE TO USE.7
Page 1 and 2: DRY-BATH INCUBATORMODELS I-G35, I-G
Page 3 and 4: Safety InformationPRECAUTIONS:DO NO
Page 5: InstallationPositioning the Incubat
Page 9 and 10: Technical SpecificationsModel I-G35

DRY-BATH INCUBATOR MODELS I-G35, I-G55, I-120 ... - Mesa Labs

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?