16 Mirrors.pdf - Qioptiq Q-Shop

The LINOSMirrorsMirrors

The LINOS MirrorsMetallic, hybrid, dielectric: the standard lineof LINOS products includes a large selectionof mirrors for a variety of applications. Bothbroadband and highly reflective mirrors forthe most common discrete wavelengths areavailable directly from the factory. Many ofthe dielectric mirrors can also be used as dichroiticbeam splitters. We can prepare aquote for a tailored solution, whether forlarge or small quantities, upon request. Justcontact us!Our quality criteria:• High-quality materials• Continuous process monitoring• Coatings for stringent demands inscience and industry• Laser-suitable coatings• Expert consultation, from the developmentphase to the finished product!Special features:To facilitate the development processwe look forward to createpreliminary designs, free of charge,based on your specifications.We can also supply catalog itemswith customized dimensions uponrequest.Ideal areas of application:Laser and high-performance optics;precision optics; illuminationoptics; beam splitting or superimposing.554 Phone numbers: US +1 585 223 2370 UK +44 2380 744 500 Singapore +65 6499 7766

Singlets Achromats Laseroptics MV Lenses Zoom Optics Plano Optics Polarization OpticsGold Plane Mirrors; Laser QualityØ ​(mm) Size ØxL ​(mm) Thickness d ​(mm)Gold Plane Mirrors, Laser Quality• Front surface gold mirror gold for the ​IR spectral range up to 25 µm• Resistant against environmentalinflu ences• Constant high reflection within a ​broad spectral and angle-of-incidence ​range without absorption bands• Average reflection > 98 % in the range ​of 0° ≤ AOI ≤ 60°, unpolarized• Low expansion material• Dielectric protection layer for ​improved environmental stabilityTolerance d ​(mm)Tolerance Ø ​(mm)Example: RAU-E (AOI=45°, unpolarized)Flatness ​(λ)Part No.ϯ 12.7 5 ±0.2 -0.08 1/10 G34 0575 000ϯ 25.4 5 ±0.2 -0.10 1/10 G34 0576 000ϯ 50 10 ±0.2 -0.12 1/10 G34 0577 00022.4x31.5 3.5 ±0.2 -0.10 1/10 G34 0578 000ϯ Recommended mounts: Lees TM Mirror Mounts in chapter Mirror Mounts.556 Phone numbers: US +1 585 223 2370 UK +44 2380 744 500 Singapore +65 6499 7766

MirrorsSilver Circular Plane Mirrors, Laser Quality• Front surface circular mirrors• Metal mirrors are fabricated from low ​expansion material• Highest reflectance for 450 nm to12 ​μm wavelength• Equal reflectance without absorption ​band• Angle of incidence from 0° to 45°• Resistant against environmentalinflu ences• Double dielectric protection layer• Suitable for short-pulse applications• Damage threshold H∞ > 1.5 J/cm 2 at1064 nm with 11 ns laser pulses(s-on-1) at 10 HzSilver Circular Plane Mirrors, Laser QualityØ (mm) Thickness d (mm) Tolerance Ø (mm) Tolerance d (mm) Flatness (λ) Part No.10 2 -0.06 ±0.2 1/10 G34 0333 40012.7 2.5 -0.08 ±0.2 1/10 G34 0513 000ϯ 12.7 5 -0.08 ±0.2 1/10 G34 0509 00018 4 -0.08 ±0.2 1/10 G34 0334 40022.4 4 -0.10 ±0.2 1/10 G34 0069 400ϯ 25.4 5 -0.10 ±0.2 1/10 G34 0525 00031.5 5 -0.12 ±0.2 1/10 G34 0008 40040 8 -0.12 ±0.2 1/10 G34 0010 400ϯ 50 10 -0.12 ±0.2 1/10 G34 0550 00063 10 -0.14 ±0.2 1/10 G34 0097 400ϯ Recommended mounts: Lees TM Mirror Mounts in chapter Mirror Mounts.A closer lookFor helpful hints on mountingmirrors and filters in mechanicalholders please see our brochure"Microbench, Bench and Rail systems- Introduction, solutions andapplications".MirrorsYou will find the brochure fordownload at www.qioptiq.com.Phone numbers: Germany +49 551 69 350France +33 47 25 20 420557

Singlets Achromats Laseroptics MV Lenses Zoom Optics Plano Optics Polarization OpticsSilver Rectangular Plane Mirrors, Laser QualitySize bxL (mm) Thickness d (mm) Tolerance b (mm) Tolerance L (mm) Tolerance d (mm) Flatness (λ) Part No.10x15 2 -0.09 -0.11 ±0.2 1/10 G34 0331 40020x30 4 -0.13 -0.13 ±0.2 1/10 G34 0536 00060x85 8 -0.19 -0.22 ±0.2 1/10 G34 0332 400Selection guideRecommended holder for size20x30 mm to mount in the LINOSMicrobench:Silver Rectangular Plane Mirrors, Laser Quality• Front surface rectangular mirrors• Low expansion material• Highest reflectance for 450 nm to12 ​μm wavelength• Equal reflectance without absorption ​band• Angle of incidence from 0° to 45°• Resistant against environmentalinflu ences• Double dielectric protection layer• Suitable for short-pulse applications• Damage threshold H∞ > 1.5 J/cm 2 at1064 nm with 11 ns laser pulses(s-on-1) at 10 HzCube 30 with built-in rotatableplate holder for plano-optics 20 x30 mm (Beam-deflector cube,G06 1084 000 on page 36)558 Phone numbers: US +1 585 223 2370 UK +44 2380 744 500 Singapore +65 6499 7766

MirrorsSilver Rectangular Plane Mirrors, Standard Quality• Front surface rectangular mirrors• Low expansion material• Highest reflectance for 450 nm to12 ​μm wavelength• Equal reflectance without absorption ​band• Angle of incidence from 0° to 45°• Resistant against environmentalinflu ences• Double dielectric protection layer• Suitable for short-pulse applications• Damage threshold H∞ > 1.5 J/cm 2 at1064 nm with 11 ns laser pulses(s-on-1) at 10 HzQ-enabledBesides high-quality standard optics, Qioptiq is a provider of customdesignedoptics. For customized optics and higher volumes pleasecontact our sales team for your individual quotation.Silver Rectangular Plane Mirrors, Standard QualitySize bxL (mm) Thickness d (mm) Tolerance b (mm) Tolerance L (mm) Tolerance d (mm) Flatness (λ) Part No.10x10 2 -0.09 -0.09 ±0.2 1/4 G34 0611 00010x15 2 -0.09 -0.11 ±0.2 1/2 G34 0614 00015x20 2 -0.11 -0.13 ±0.2 1/2 G34 0615 00020x30 2.5 -0.13 -0.13 ±0.2 1/2 G34 0636 00040x58 8 -0.16 -0.19 ±0.2 1/4 G34 0642 00060x85 8 -0.19 -0.22 ±0.2 1 G34 0662 00080x120 8 -0.19 -0.22 ±0.2 2 G34 0682 000100x150 10 -0.22 -0.25 ±0.2 4 G34 0066 400A closer lookThe tempered glass used for some mirrors is a borosilicate glass withnd = 1.47 and an expansion coefficient of α 20 - 300 °C= 3.3​*10 -6 /K (i.e. Pyrex,DURAN, Tempax,​Borofloat).MirrorsCustomized versions (for example, with different substrates andcoatings) are available on request for large-volume orders.Phone numbers: Germany +49 551 69 350France +33 47 25 20 420559

Singlets Achromats Laseroptics MV Lenses Zoom Optics Plano Optics Polarization OpticsSilver Circular Plane Mirrors, Standard QualityØ (mm) Thickness d (mm) Tolerance Ø (mm) Tolerance d (mm) Flatness (λ) Part No.6 1 -0.05 ±0.2 1/4 G34 0506 00010 2 -0.06 ±0.2 1/4 G34 0610 00012.7 2.5 -0.08 ±0.2 1/4 G34 0613 00018 4 -0.08 ±0.2 1/2 G34 0618 00021 4 -0.10 ±0.2 1/4 G34 0621 00022.2 4 -0.10 ±0.2 1/2 G34 0622 000ϯ 25.4 5 -0.10 ±0.2 1/2 G34 0625 00031.5 5 -0.12 ±0.2 1/2 G34 0631 00040 8 -0.12 ±0.2 1/2 G34 0640 000ϯ 50 5 -0.12 ±0.2 1 G34 0650 00063 10 -0.14 ±0.2 1 G34 0663 00080 12.5 -0.14 ±0.2 2 G34 0680 000ϯ Recommended mounts: Lees TM Mirror Mounts in chapter Mirror Mounts.Silver Circular Plane Mirrors, Standard Quality• Front surface circular mirrors• Metal mirrors are fabricated from low ​expansion material• Highest reflectance for 450 nm to12 ​μm wavelength• Equal reflectance without absorption ​band• Angle of incidence from 0° to 45°• Resistant against environmentalinflu ences• Double dielectric protection layer• Suitable for short-pulse applications• Damage threshold H∞ > 1.5 J/cm 2 at1064 nm with 11 ns laser pulses(s-on-1) at 10 HzSelection guideHolders for mounting unmountedmirrors, e.g. centering holders, arelisted under "Mounts, Posts andHolders" and "Mirror Mounts."560 Phone numbers: US +1 585 223 2370 UK +44 2380 744 500 Singapore +65 6499 7766

MirrorsSilver Elliptical Plane Mirrors, Laser Quality• Front surface elliptical mirrors• Low expansion material• Highest reflectance for 450 nm to12 ​μm wavelength• Equal reflectance without absorption ​band• Angle of incidence from 0° to 45°• Resistant against environmentalinflu ences• Double dielectric protection layer• Suitable for short-pulse applications• Damage threshold H∞ > 1.5 J/cm 2 at1064 nm with 11 ns laser pulses(s-on-1) at 10 HzSilver Elliptical Plane Mirrors, Laser QualitySize ØxL (mm) Thickness d (mm) Tolerance Ø (mm) Tolerance d (mm) Flatness (λ) Part No.22.4x31.5 3.5 -0.10 ±0.2 1/10 G34 0523 000Silver Elliptical Plane Mirrors, Standard Quality• Front surface elliptical mirrors• Equal reflectance without absorption ​band• Angle of incidence from 0° to 45°• Resistant against environmentalinflu ences• Double dielectric protection layer• Suitable for short-pulse applications• Damage threshold H∞ > 1.5 J/cm 2 at1064 nm with 11 ns laser pulses(s-on-1) at 10 HzMirrorsSilver Elliptical Plane Mirrors, Standard QualitySize ØxL (mm) Thickness d (mm) Tolerance Ø (mm) Tolerance d (mm) Flatness (λ) Part No.10x14 2 -0.06 ±0.2 1/2 G34 0612 00012.5x18 2 -0.08 ±0.2 1/2 G34 0616 00022.4x31.5 3.5 -0.10 ±0.2 1/2 G34 0623 00031.5x45 4 -0.12 ±0.2 1/2 G34 0632 00050x71 6 -0.12 ±0.2 1 G34 0651 00080x113 12.5 -0.14 ±0.2 1/4 G34 0681 000Phone numbers: Germany +49 551 69 350France +33 47 25 20 420561

Singlets Achromats Laseroptics MV Lenses Zoom Optics Plano Optics Polarization OpticsAluminized Plane Mirrors - Circular plane• Standard aluminium mirrors for thespectral ranges VIS to IR up to 10 µmor UV to 3 µm, respectively• High reflection within a broad spectraland angle-of-incidence range• Protected by an SiO 2overcoating (RAL)or MgF 2protective overcoating for theUV-region (RAL UV)• Low expansion material• RAL UV: Damage threshold H∞> 200 mJ/cm 2 at 193 nm with 30 nslaser pulses (s-on-1) at 10 Hz• RAL VIS: Damage threshold H∞> 1.5 J / cm 2 at 1064 nm with 11 nslaser pulses (s-on-1) at 10 HzA closer lookThe tempered glass used for some mirrors is a borosilicate glass withnd = 1.47 and an expansion coefficient of α 20 - 300 °C= 3.3​*10 -6 /K (i.e. Pyrex,DURAN, Tempax,​Borofloat).Customized versions (for example, with different substrates andcoatings) are available on request for large-volume orders.562 Phone numbers: US +1 585 223 2370 UK +44 2380 744 500 Singapore +65 6499 7766

MirrorsAluminized Plane Mirrors - Circular PlaneSurface CoatingØ ​(mm)Thickness d ​(mm)Tolerance Ø ​(mm)Tolerance d ​(mm)Flatness ​(λ)Part No.RAL-Coating 380 nm ​- 10 μm 6 1 -0.05 ±0.2 1/4 G34 0080 000RAL-Coating 380 nm ​- 10 μm 10 2 -0.06 ±0.2 1/4 G34 0081 000RAL-Coating 380 nm ​- 10 μm 10 2 -0.06 ±0.2 1/10 G34 0333 331RAL-Coating 380 nm ​- 10 μm 12.7 2.5 -0.08 ±0.2 1/4 G34 0082 000RAL-Coating 380 nm ​- 10 μm 12.7 2.5 -0.08 ±0.2 1/10 G34 0341 000ϯ RAL-Coating 380 nm ​- 10 μm 12.7 5 -0.08 ±0.2 1/10 G34 0207 000RAL-Coating 380 nm ​- 10 μm 18 4 -0.08 ±0.2 1/2 G34 0083 000RAL-Coating 380 nm ​- 10 μm 18 4 -0.08 ±0.2 1/10 G34 0334 331RAL-Coating 380 nm ​- 10 μm 21 4 -0.10 ±0.2 1/4 G34 0084 000RAL-Coating 380 nm ​- 10 μm 22.2 4 -0.10 ±0.2 1/2 G34 0005 000RAL-Coating 380 nm ​- 10 μm 22.2 4 -0.10 ±0.2 1/10 G34 0069 000ϯ RAL-Coating 380 nm ​- 10 μm 25.4 5 -0.10 ±0.2 1/2 G34 0085 000ϯ RAL-Coating 380 nm ​- 10 μm 25.4 5 -0.10 ±0.2 1/10 G34 0086 000RAL-Coating 380 nm ​- 10 μm 31.5 5 -0.12 ±0.2 1/2 G34 0087 000RAL-Coating 380 nm ​- 10 μm 31.5 5 -0.12 ±0.2 1/10 G34 0008 000RAL-Coating 380 nm ​- 10 μm 40 8 -0.12 ±0.2 1/2 G34 0088 000RAL-Coating 380 nm ​- 10 μm 40 8 -0.12 ±0.2 1/10 G34 0010 000ϯ RAL-Coating 380 nm ​- 10 μm 50 5 -0.12 ±0.2 1 G34 0000 000ϯ RAL-Coating 380 nm ​- 10 μm 50 10 -0.12 ±0.2 1/10 G34 0016 000RAL-Coating 380 nm ​- 10 μm 63 10 -0.14 ±0.2 1 G34 0089 000RAL-Coating 380 nm ​- 10 μm 63 10 -0.14 ±0.2 1/10 G34 0097 000RAL-Coating 380 nm ​- 10 μm 80 12.5 -0.14 ±0.2 2 G34 0090 000RAL-Coating 380 nm ​- 10 μm 80 12.5 -0.14 ±0.2 1/10 G34 0098 000RAL UV-Coating 220 ​nm - 3 μm 6 1 -0.05 ±0.2 1/4 G34 0080 332RAL UV-Coating 220 ​nm - 3 μm 10 2 -0.06 ±0.2 1/4 G34 0340 000RAL UV-Coating 220 ​nm - 3 μm 10 2 -0.06 ±0.2 1/10 G34 0333 000RAL UV-Coating 220 ​nm - 3 μm 12.7 2.5 -0.08 ±0.2 1/4 G34 0082 332RAL UV-Coating 220 ​nm - 3 μm 12.7 2.5 -0.08 ±0.2 1/10 G34 0341 332ϯ RAL UV-Coating 220 ​nm - 3 μm 12.7 5 -0.08 ±0.2 1/10 G34 0304 000RAL UV-Coating 220 ​nm - 3 μm 18 4 -0.08 ±0.2 1/2 G34 0342 000RAL UV-Coating 220 ​nm - 3 μm 18 4 -0.08 ±0.2 1/10 G34 0334 000RAL UV-Coating 220 ​nm - 3 μm 21 4 -0.10 ±0.2 1/4 G34 0084 332RAL UV-Coating 220 ​nm - 3 μm 22.2 4 -0.10 ±0.2 1/2 G34 0092 000RAL UV-Coating 220 ​nm - 3 μm 22.2 4 -0.10 ±0.2 1/10 G34 0335 000ϯ RAL UV-Coating 220 ​nm - 3 μm 25.4 5 -0.10 ±0.2 1/2 G34 0343 000ϯ RAL UV-Coating 220 ​nm - 3 μm 25.4 5 -0.10 ±0.2 1/10 G34 0346 000RAL UV-Coating 220 ​nm - 3 μm 31.5 5 -0.12 ±0.2 1/2 G34 0344 000RAL UV-Coating 220 ​nm - 3 μm 31.5 5 -0.12 ±0.2 1/10 G34 0336 000RAL UV-Coating 220 ​nm - 3 μm 40 8 -0.12 ±0.2 1/10 G34 0010 332ϯ RAL UV-Coating 220 ​nm - 3 μm 50 10 -0.12 ±0.2 1/10 G34 0337 000RAL UV-Coating 220 ​nm - 3 μm 63 10 -0.14 ±0.2 1/10 G34 0097 332ϯ Recommended mounts: Lees TM Mirror Mounts in chapter Mirror Mounts.MirrorsPhone numbers: Germany +49 551 69 350France +33 47 25 20 420563

Singlets Achromats Laseroptics MV Lenses Zoom Optics Plano Optics Polarization OpticsRectangular Plane MirrorsSurface ​CoatingSize bxL ​(mm)Aluminized Plane Mirrors - Rectangular plane• Standard aluminium mirrors for thespectral ranges VIS to IR up to 10 µmor UV to 3 µm, respectively• High reflection within a broad spectraland angle-of-incidence range• Protected by an SiO 2overcoating (RAL)or MgF 2protective overcoating for theUV-region (RAL UV)Thickness d ​(mm)Tolerance b ​(mm)Tolerance L ​(mm)• Low expansion material• RAL UV: Damage threshold H∞> 200 mJ/cm 2 at 193 nm with 30 nslaser pulses (s-on-1) at 10 Hz• RAL VIS: Damage threshold H∞> 1.5 J / cm 2 at 1064 nm with 11 nslaser pulses (s-on-1) at 10 HzTolerance d ​(mm)Flatness ​(λ)Part No.RAL-Coating 380 nm ​- 10 μm 10x10 2 -0.09 -0.09 ±0.2 1/4 G34 0063 000RAL-Coating 380 nm ​- 10 μm 10x15 2 -0.09 -0.11 ±0.2 1/2 G34 0056 000RAL-Coating 380 nm ​- 10 μm 10x15 2 -0.09 -0.11 ±0.2 1/10 G34 0331 331RAL-Coating 380 nm ​- 10 μm 15x20 2 -0.11 -0.13 ±0.2 1/2 G34 0057 000RAL-Coating 380 nm ​- 10 μm 20x30 2.5 -0.13 -0.13 ±0.2 1/2 G34 0060 000RAL-Coating 380 nm ​- 10 μm 20x30 4 -0.13 -0.13 ±0.2 1/10 G34 0301 000RAL-Coating 380 nm ​- 10 μm 40x58 8 -0.16 -0.19 ±0.2 1/4 G34 0064 000RAL-Coating 380 nm ​- 10 μm 60x85 8 -0.19 -0.22 ±0.2 1 G34 0058 000RAL-Coating 380 nm ​- 10 μm 60x85 8 -0.19 -0.22 ±0.2 1/10 G34 0332 331RAL-Coating 380 nm ​- 10 μm 80x120 8 -0.19 -0.22 ±0.2 2 G34 0065 000RAL-Coating 380 nm ​- 10 μm 100x150 10 -0.22 -0.25 ±0.2 4 G34 0066 000RAL-Coating 380 nm ​- 10 μm 150x225 15 -0.25 -0.29 ±0.2 5 G34 0067 000RAL-Coating 380 nm ​- 10 μm 200x300 20 -0.29 -0.35 ±0.2 6 G34 0068 000RAL UV-Coating 220 ​nm - 3 μm 10x15 2 -0.09 -0.11 ±0.2 1/2 G34 0300 000RAL UV-Coating 220 ​nm - 3 μm 10x15 2 -0.09 -0.11 ±0.2 1/10 G34 0331 000RAL UV-Coating 220 ​nm - 3 μm 15x20 2 -0.11 -0.13 ±0.2 1/2 G34 0057 332RAL UV-Coating 220 ​nm - 3 μm 20x30 2.5 -0.13 -0.13 ±0.2 1/2 G34 0093 000RAL UV-Coating 220 ​nm - 3 μm 20x30 4 -0.13 -0.13 ±0.2 1/10 G34 0302 000RAL UV-Coating 220 ​nm - 3 μm 40x58 8 -0.16 -0.19 ±0.2 1/4 G34 0064 332RAL UV-Coating 220 ​nm - 3 μm 60x85 8 -0.19 -0.22 ±0.2 1 G34 0308 000Q-enabledBesides high-quality standard optics, Qioptiq is a provider of customdesignedoptics. For customized optics and higher volumes please contactour sales team for your individual quotation.564 Phone numbers: US +1 585 223 2370 UK +44 2380 744 500 Singapore +65 6499 7766

Singlets Achromats Laseroptics MV Lenses Zoom Optics Plano Optics Polarization OpticsDielectric-Coated Plane Mirrors DLHS VUV 157 nm• For high-power / high-energy laser ​applications• Polished back surface• Extreme low scattering losses• Mirror with dielectric VUV High-power ​coating• Beam steering mirror for 45° angle of ​incidence, 90° beam deflection• Flatness λ / 4• Front surface RMS ≤ 1 nm polished• CaF2 substrate• > 90 % reflection at 157 nm• Damage threshold LIDT > 400 mJ / cm 2 ​for 15 ns laser pulses at 1000-on-1Dielectric-Coated Plane Mirrors DLHS VUV 157 nmØ (mm) Thickness d (mm) Part No.25 5 G34 0703 000A closer lookFor helpful hints on mountingmirrors and filters in mechanicalholders please see our brochure"Microbench, Bench and Rail systems- Introduction, solutions andapplications".You will find the brochure fordownload at www.qioptiq.com.566 Phone numbers: US +1 585 223 2370 UK +44 2380 744 500 Singapore +65 6499 7766

MirrorsDielectric-Coated Plane Mirrors DLHS VUV 193 nm• For high-power / high-energy laser ​applications• Beam steering mirror for 45° angle of ​incidence, 90° beam deflection• Polished back surface• Extreme low scattering losses• Mirror with dielectric VUV High-power ​coating• Flatness λ / 4• Front surface RMS ≤ 1 nm polished• CaF2 substrate• > 94 % reflection at 193 nm• Damage threshold LIDT > 1 J / cm 2 for ​20 ns laser pulses at 1000-on-1Dielectric-Coated Plane Mirrors DLHS VUV 193 nmØ (mm) Thickness d (mm) Part No.25 6.35 G34 0701 000Dielectric-Coated Plane Mirrors DLHS UV 248 nm• For high-power / high-energy laser ​applications• Beam steering mirror for 45° angle of ​incidence, 90° beam deflection• Polished back surface• Extreme low scattering losses• Mirror with dielectric VUV High-power ​coating• Flatness λ / 10• Fused silica substrate• Front surface RMS ≤ 1 nm polished• > 80 % transmission for λ > 300 nm(additional AR coating required)• Damage thresholds H∞ > 5 J / cm 2 at308 nm with 15 ns laser pulses (s-on-1)at 10 HzDielectric-Coated Plane Mirrors DLHS UV 248 nmMirrorsØ (mm) Thickness d (mm) Part No.25 5 G34 0723 00050 10 G34 0725 00063 10 G34 0726 000Q-enabledBesides high-quality standard optics, Qioptiq is a provider of customdesignedoptics. For customized optics and higher volumes please contactour sales team for your individual quotation.Phone numbers: Germany +49 551 69 350France +33 47 25 20 420567

Singlets Achromats Laseroptics MV Lenses Zoom Optics Plano Optics Polarization OpticsDielectric-Coated Plane Mirrors DLHS UV 266 nm• For high-power / high-energy laser ​applications• Beam steering mirror for 45° angle of ​incidence, 90° beam deflection• Polished back surface• Extreme low scattering losses• Elliptical and circular plane mirrors• Mirror with dielectric VUV High-power ​coating• Also suitable as dichroic / longpassDielectric-Coated Plane Mirrors DLHS UV 266 nm• Flatness λ / 10• Fused silica subtrate• Front surface RMS ≤ 1 nm polished• Guaranteed reflection > 99.5 % at 266nm, both with AOI = 0° or AOI = 45°(average polarization)• > 80 % transmission for λ > 300 nm(additional AR coating required)• Damage thresholds H∞ > 5 J / cm 2 at308 nm with 15 ns laser pulses (s-on-1)at 10 HzSize Ø or ØxL (mm) Thickness d (mm) Part No.12.7 5 G34 0721 000Elliptical 22.4x31.5 5 G34 0722 00025 5 G34 0724 000StandardPlusIf you require standard mirrors with a smaller diameter please contactour sales team for a quick price information. We can easily downsizeour standard mirrors as StandardPlus-option.Dielectric-Coated Plane Mirrors DLHS UV 308 nm• For high-power / high-energy laser ​applications• Beam steering mirror for 45° angle of ​incidence, 90° beam deflection• Polished back surface• Extreme low scattering losses• Mirror with dielectric VUV High-power ​coating• Also suitable as dichroic / longpass• Flatness λ / 10• Fused silica substrate• Front surface RMS ≤ 1 nm polished• Guaranteed reflection > 99.5 % at 308nm, both with AOI = 0° or AOI = 45°(average polarization)• > 80 % transmission for λ > 400 nm(additional AR coating required)• Damage thresholds H∞ > 5 J / cm 2 at308 nm with 15 ns laser pulses (s-on-1)at 10 HzDielectric-Coated Plane Mirrors DLHS UV 308 nmØ (mm) Thickness d (mm) Part No.25 5 G34 0733 00050 10 G34 0735 000568 Phone numbers: US +1 585 223 2370 UK +44 2380 744 500 Singapore +65 6499 7766

MirrorsDielectric-Coated Plane Mirrors DLHS UV 351-355 nm• For high-power/high-energy laser ​applications• Beam steering mirror for 45° angle of ​incidence, 90° beam deflection• Polished back surface• Extreme low scattering losses• Elliptical and circular plane mirrors• Mirror with dielectric VUV High-power ​coating• Also suitable as dichroic / longpass• Flatness λ / 10• Fused silica substrate• Front surface RMS ≤ 1 nm polished• Guaranteed reflection > 99.5 % at351 - 355 nm, both with AOI = 0° orAOI = 45° (average polarization)• > 80 % transmission for λ > 450 nm(additional AR coating required)• Damage thresholds H∞ > 5 J / cm 2 at308 nm with 15 ns laser pulses (s-on-1)at 10 HzDielectric-Coated Plane Mirrors DLHS UV 351 - 355 nmSize Ø or ØxL (mm) Thickness d (mm) Part No.12.7 5 G34 0741 000Elliptical 22.4x31.5 5 G34 0742 00025 5 G34 0743 00050 10 G34 0745 000Selection guideRecommended mirror holder forelliptical mirrors 22.4x31.5 mm:• Beam steering mirror holder 30,(G06 5087 000 on page 54)• Beam steering mirror holder,adjustable (G06 5096 000 onpage 104)MirrorsG06 5087 000 G06 5096 000Phone numbers: Germany +49 551 69 350France +33 47 25 20 420569

Singlets Achromats Laseroptics MV Lenses Zoom Optics Plano Optics Polarization OpticsDielectric-Coated Plane Mirrors DLHS UV 405 nm• For high-power/high-energy laser ​applications• Beam steering mirror for 0 - 50° angle ​of incidence• Polished back surface• Extreme low scattering losses• Elliptical and circular plane mirrors• Mirror with dielectric UV High-power ​coating• Also suitable as dichroic / longpassDielectric-Coated Plane Mirrors DLHS UV 405 nm• Flatness λ / 10• Fused silica substrate• Front surface RMS ≤ 1 nm polished• Guaranteed reflection > 99.5 % at405 nm, both with AOI = 0° orAOI = 45° (average polarization)• < 10 % reflection for 480 nm< λ < 1100 nm (at 45° AOI)• Damage thresholds H∞ > 5 J / cm 2 at308 nm with 15 ns laser pulses (s-on-1)at 10 HzSize Ø or ØxL (mm) Thickness d (mm) Part No.12.7 5 G34 0704 00025 5 G34 0706 000Elliptical 22.4x31.5 *) 5 G34 0705 000*) Recommended mirror holder:Beamsteering mirror holder 30 (G06 5087 000 on page 54)Beamsteering mirror holder, adjustable (G06 5096 000 on page 104)Dielectric-Coated Plane Mirrors DLHS 532 nm• For high-power / high-energy laser ​applications• Beam steering mirror for 45° angle of ​incidence, 90° beam deflection• Polished back surface• Extreme low scattering losses• Elliptical and circular plane mirrors• Also suitable as dichroit / longpass• Flatness λ / 10• Fused silica substrate• Front surface RMS ≤ 1 nm polished• Guaranteed reflection > 99.8 % for532 nm for AOI = 0° or AOI = 45°(average polarization)• > 90 % transmission for λ > 750 nm(additional AR coating required)• Damage threshold H∞ > 10 J / cm 2 at532 nm with 15 ns laser pulses (s-on-1)at 10 HzDielectric-Coated Plane Mirrors DLHS 532 nmSize Ø or ØxL (mm) Thickness d (mm) Part No.12.7 5 G34 0751 000Elliptical 22.4x31.5 *) 5 G34 0752 00025 5 G34 0753 00050 10 G34 0755 000*) Recommended mirror holder:Beamsteering mirror holder 30 (G06 5087 000 on page 54)Beamsteering mirror holder, adjustable (G06 5096 000 on page 104)570 Phone numbers: US +1 585 223 2370 UK +44 2380 744 500 Singapore +65 6499 7766

MirrorsDielectric-Coated Plane Mirrors DLHS 633 nm• For high-power / high-energy laser ​applications• Beam steering mirror for 45° angle of ​incidence, 90° beam deflection• Polished back surface• Extreme low scattering losses• Elliptical and circular plane mirrors• Also suitable as Dichroic / longpass• Flatness λ / 10• Fused silica substrate• Front surface RMS ≤ 1 nm polished• Guaranteed reflection > 99.8 % for633 nm for AOI = 0° or AOI = 45°(average polarization)• > 90 % transmission for λ > 850nm(additional AR coating required)• Damage threshold H∞ > 10 J / cm 2 at532 nm with 15 ns laser pulses (s-on-1)at 10 HzDielectric-Coated Plane Mirrors DLHS 633 nmSize Ø or ØxL (mm) Thickness d (mm) Part No.12.7 5 G34 0756 000Elliptical 22.4x31.5 *) 5 G34 0757 00025 5 G34 0758 00050 10 G34 0759 000*) Recommended mirror holder:Beamsteering mirror holder 30 (G06 5087 000 on page 54)Beamsteering mirror holder, adjustable (G06 5096 000 on page 104)A closer lookFor helpful hints on mountingmirrors and filters in mechanicalholders please see our brochure"Microbench, Bench and Rail systems- Introduction, solutions andapplications".You will find the brochure fordownload at www.qioptiq.com.MirrorsPhone numbers: Germany +49 551 69 350France +33 47 25 20 420571

Singlets Achromats Laseroptics MV Lenses Zoom Optics Plano Optics Polarization OpticsDielectric Coated Plane Mirror DLHS 755-840 nm, Ti:Sa• With broadband dielectric coating ​designed for Ti:Sapphire lasers• For high-power/high-energyapplica tions• Beam steering mirror for 45° angle of ​incidence, 90° beam deflection• Polished back surface• Extreme low scattering losses• Use at 0 - 45° angle of incidence• Elliptical, circular and rectangular ​plane mirrors• Circular mirrors with flatness λ / 10• Fused silica substrates• Guaranteed reflection > 99 % for theHR range 755 nm to 840 nm for0° ≤ AOI ≤ 45° (average polarization)• Damage threshold H ∞ > 10 J/cm 2 at1064 nm with 11 ns laser pulses(s-on-1) at 10 HzTi:Sapphire Mirrors 755-840 nmSize Ø or bxL (mm) Thickness d (mm) Material Part No.12.7 5 Fused silica G34 0801 000Elliptical 22.4x31.5 *) 5 Fused silica G34 0802 00025 5 Fused silica G34 0803 00020x30 2.5 Fused silica G34 0804 00050 10 Fused silica G34 0805 000*) Recommended mirror holder:Beamsteering mirror holder 30 (G06 5087 000 on page 54)Beamsteering mirror holder, adjustable (G06 5096 000 on page 104)Q-enabledBesides high-quality standard optics, Qioptiq is a provider of customdesignedoptics. For customized optics and higher volumes please contactour sales team for your individual quotation.572 Phone numbers: US +1 585 223 2370 UK +44 2380 744 500 Singapore +65 6499 7766

MirrorsDielectric-Coated Plane Mirrors DLHS NIR 1064 nm• For high-power / high-energy laser ​applications• Beam steering mirror for 45° angle of ​incidence, 90° beam deflection• Polished back surface• Extreme low scattering losses• Elliptical and circular plane mirrors• Mirror with dielectric VUV High-power ​coating• Also suitable as dichroic / shortpass• Flatness λ / 10• Fused silica substrate• Front surface RMS ≤ 1 nm polished• Guaranteed reflection > 99.8 % for1064 nm for AOI = 0° or AOI = 45°(average polarization)• > 90 % transmission for 500 nm < λ< 750 nm (additional AR coatingrequired)• Damage threshold H∞ > 30 J/cm 2 at1064 nm with 11 ns laser pulses(s-on-1) at 10 HzDielectric-Coated Plane Mirrors DLHS IR 1064 nmSize Ø or bxL (mm) Thickness d (mm) Part No.12.7 5 G34 0761 000Elliptical 22.4x31.5 *) 5 G34 0762 00025 5 G34 0763 00050 10 G34 0765 000*) Recommended mirror holder:Beamsteering mirror holder 30 (G06 5087 000 on page 54)Beamsteering mirror holder, adjustable (G06 5096 000 on page 104)Dielectric-Coated Plane Mirrors DLHS NIR 1540 nm• For high-power / high-energy laser ​applications• Beam steering mirror for 45° angle of ​incidence, 90° beam deflection• Polished back surface• Extreme low scattering losses• Elliptical and circular plane mirrors• Mirror with dielectric High-power ​coating• Also suitable as dichroic / shortpass• Flatness λ / 10• Fused silica substrate• Front surface RMS ≤ 1 nm polished• Guaranteed reflection > 99.8 % for1540 nm for AOI = 0° or AOI = 45°(average polarization)• > 90 % transmission for 800 nm < λ< 1200 nm (additional AR coatingrequired)• Damage threshold H∞ > 30 J/cm 2 at1064 nm with 11 ns laser pulses(s-on-1) at 10 HzMirrorsDielectric-Coated Plane Mirrors DLHS IR 1540 nmSize Ø or bxL (mm) Thickness d (mm) Part No.12.7 5 G34 0771 000Elliptical 22.4x31.5 *) 5 G34 0772 00025 5 G34 0773 00050 10 G34 0775 000*) Recommended mirror holder:Beamsteering mirror holder 30 (G06 5087 000 on page 54)Beamsteering mirror holder, adjustable (G06 5096 000 on page 104)Phone numbers: Germany +49 551 69 350France +33 47 25 20 420573

Singlets Achromats Laseroptics MV Lenses Zoom Optics Plano Optics Polarization OpticsDielectric-Coated Plane Mirrors DLB SBB 350-950 nm• For high-power / high-energy laser ​applications• Beam steering mirror for 45° angle of ​incidence, 90° beam deflection• Polished back surface (only fused silica)• Extreme low scattering lossesDielectric-Coated Plane Mirrors DLB SBB 350 - 950 nmDimensions (mm) Thickness d (mm) Material Part No.Ø 10.0 2 fused silica G34 0780 000Ø 12.7 5 tempered glass G34 0781 000elliptical Ø 22.4x31.5 *) 5 fused silica G34 0782 000Ø 25.4 8 tempered glass G34 0783 00020x30 2.5 fused silica G34 0784 000Ø 50.0 10 fused silica G34 0785 000*) Recommended mirror holder:Beamsteering mirror holder 30 (G06 5087 000 on page 54)Beamsteering mirror holder, adjustable (G06 5096 000 on page 104)Dielectric-Coated Plane Mirrors LBSM-UV• Dielectric coated plane mirror LBSM ​for laser applications• Fused silica substrate• R abs > 98 % at 350 - 950 nm (AOI =45°, unpolarized) and at 400 - 1050 nm(AOI = 0°, unpolarized)• R avg > 99 % at 350 - 950 nm (AOI =45°, unpolarized) and at 400 - 1050 nm(AOI = 0°, unpolarized)• 1" (25.4 mm) diameter, 8 mm thickness• Broadband reflection > 99 %• Flatness λ / 10• Substrate: Borofloat• Deflection mirror for 0 - 45° angles• Reflection > 99 % for 300 - 550 nm for ​any polarization• Damage threshold 500 kW / cm 2 (cw), ​0.3 J / cm 2 (10 ns pulses)Dielectric-Coated Plane Mirrors LBSM-UVØ (mm) Thickness d (mm) Part No.25.4 8 G38 3078 050574 Phone numbers: US +1 585 223 2370 UK +44 2380 744 500 Singapore +65 6499 7766

MirrorsDielectric-Coated Plane Mirrors LBSM-VIS• Dielectric coated plane mirror LBSM ​for laser applications• 1" (25.4 mm) diameter, 8 mm thickness• Broadband reflection > 99 %• Flatness λ / 10• Substrate: Borofloat• Deflection mirror for 0 - 45° angles• Reflection > 99 % for 450 - 700 nm for ​any polarization• Damage threshold 500 kW / cm 2 (cw), ​1.0 J / cm 2 (10 ns pulses)Dielectric-Coated Plane Mirrors LBSM-VISØ (mm) Thickness d (mm) Part No.25.4 8 G38 3079 050Dielectric-Coated Plane Mirrors LBSM-NIR• Dielectric coated plane mirror LBSM ​for laser applications• 1" (25.4 mm) diameter, 8 mm thickness• Broadband reflection > 99 %• Flatness λ / 10• Substrate: Borofloat• Deflection mirror for 45° angles• Reflection > 99 % for 700 - 900 nm• Damage threshold 500 kW / cm 2 (cw), ​10 J / cm 2 (28 ns pulses)Dielectric-Coated Plane Mirrors LBSM-NIRØ (mm) Thickness d (mm) Part No.25.4 8 G38 3080 050MirrorsPhone numbers: Germany +49 551 69 350France +33 47 25 20 420575

Singlets Achromats Laseroptics MV Lenses Zoom Optics Plano Optics Polarization OpticsMI1000-TiD 750-940 nm at 0° AOIGDD [fs²]100806040200-20-40-60-80-100700 750 800 850 900 950 1000Wavelength [nm]Dielectric-Coated Plane Mirrors LBSM-YAG• Dielectric coated plane mirror LBSM ​for laser applications• 1" (25,4 mm) diameter, 8 mm thickness• Broadband reflection > 99 %• Flatness λ / 10• Substrate: Borofloat• Deflection mirror• Reflection > 99 % for 0 - 45° angles at ​1064 nm• Damage threshold 1 MW / cm 2 (cw),5 J ​/ cm 2 (10 ns pulses)Dielectric-Coated Plane Mirrors LBSM-YAGØ (mm) Thickness d (mm) Part No.25.4 8 G38 3082 050High-Energy Dispersion-Free Laser MirrorsFor ultrafast Ti:Sapphire and fiber lasers, ​LINOS offers a line of dispersion-free ​mirrors that offer both broadband ​reflectivity and high laser-damage ​thresholds. These laser mirrors are ion ​beam sputtered; thus the coatings are ​dense, easy to clean and insensitive to ​moisture.• Ideal for high-energy Ti:Sapphire and ​microscopy applications• Dispersion-free mirrors andbeamsplit ters• Substrate material fused silica• Wavefront λ/10 flatness (p-v at 633 nm, ​after coating with power subtracted)• Surface Quality 20-10• Damage threshold ~ 2 J/cm2 for 500 fs ​laser pulsesMI1000-TiD 750-940 nm at 0° AOI - GDD ModelMI1045-TiD 740-980 nm at 45° AOIMI1045-TiD 740-980 nm at 45° AOI - GDD ModelHigh-Energy Dispersion-Free Laser MirrorsItem Title Ø D (mm) Wavelength range ​(nm) Reflectivity (%) Thickness (mm) Part No.MI 1000-TiD 25.4 750-940 99.8 6.35 G39 0335 000MI 1045-TiD 25.4 750-970 99.8 6.35 G39 0336 000576 Phone numbers: US +1 585 223 2370 UK +44 2380 744 500 Singapore +65 6499 7766

MirrorsPlane Mirror SILFLEX / ALFLEXSILFLEX-VIS 50x50 mm• Mirrors for multimedia-, show- and ​projection systems• No polarization and light effects• Long-life• High stability due to patented Sputter ​technique• Substrate: heat-resistant Borosilicate ​glass• SILFLEX-VIS: Extremly high reflection in ​the VIS (R > 98 % for 420 - 680 nm,α = ​0° - 45°)• ALFLEX-B: High reflection in the VIS (R ​> 89 % for 400 - 700 nm, α = 25° - 45°)• ALFLEX-UV: High reflection in the UV ​(R > 88 %, 200 - 250 nm; R > 85 %,200 ​- 700 nm, α = 25° - 45°)StandardPlusSpecial sizes up to 160 x 110 mm available on request.Plane Mirror SILFLEX / ALFLEXItem Title Dimensions (mm) Part No.SILFLEX-VIS 160 x 110 G38 0359 050ALFLEX-B 160 x 110 G38 0359 030ALFLEX-UV 160 x 110 G38 0364 030SILFLEX-VIS 50 x 50 G38 0359 056SILFLEX-VIS 25 x 25 G38 0359 053SILFLEX-VIS Ø = 50 G38 0359 055SILFLEX-VIS Ø = 25 G38 0359 052MirrorsPhone numbers: Germany +49 551 69 350France +33 47 25 20 420577

Singlets Achromats Laseroptics MV Lenses Zoom Optics Plano Optics Polarization OpticsLaser-Mirror Substrates, Fused-Silicar ​(m​m)Ø​(m​m)dm ​(m​m)dm ​Tol​era​nce​(m​m)Laser-Mirror Substrates, Fused-Silica• Extreme low scattering losses• High surface quality• Substrate for dielectric or metallic ​coatings• Surface quality: λ/10 for concave​surfaces (P-V)• Surface quality: λ/4 for flat surfaces​(P-V)StandardPlusCustom substrates offering other​ diameters, focal lengths, materialsfor​higher quantities upon request.dr ​(m​m)Ø ​Tol​era​nce ​(m​m)Sur​fac​e ​Qu​alit​yTes​ted ​are​a Ø ​(m​m)Part No.-10 12.7 4 ±0.2 6 -0.11 1x0.​063 8 G34 0160 000-​25.4​8 12.7 5.3 ±0.2 6 -0.11 1x0.​063 8 G34 0162 000-​50.1​2 12.7 5.6 ±0.2 6 -0.11 1x0.​063 8 G34 0164 000-100 12.7 5.8 ±0.2 6 -0.11 1x0.​063 8 G34 0168 000-​149.​62 12.7 5.9 ±0.2 6 -0.11 1x0.​063 8 G34 0170 000-​251.​19 12.7 5.9 ±0.2 6 -0.11 1x0.​063 8 G34 0174 000-​349.​74 12.7 5.9 ±0.2 6 -0.11 1x0.​063 8 G34 0176 000-​501.​19 12.7 6 ±0.2 6 -0.11 1x0.​063 8 G34 0178 000-​697.​83 12.7 6 ±0.2 6 -0.11 1x0.​063 8 G34 0180 000-​1000 12.7 6 ±0.2 6 -0.11 1x0.​063 8 G34 0182 000-​1496​.2 12.7 6 ±0.2 6 -0.11 1x0.​063 8 G34 0184 000-​1995​.3 12.7 6 ±0.2 6 -0.11 1x0.​063 8 G34 0186 000-​3006​.9 12.7 6 ±0.2 6 -0.11 1x0.​063 8 G34 0188 000-​5308​.8 12.7 6 ±0.2 6 -0.11 1x0.​063 8 G34 0190 000-​1214​4 12.7 6 ±0.2 6 -0.11 1x0.​063 8 G34 0192 000-​251.​19 25.4 5.7 ±0.2 6 -0.13 3x0.​063 20 G34 0175 000-​349.​74 25.4 5.8 ±0.2 6 -0.13 3x0.​063 20 G34 0177 000-​501.​19 25.4 5.8 ±0.2 6 -0.13 3x0.​063 20 G34 0179 000-​1000 25.4 5.9 ±0.2 6 -0.13 3x0.​063 20 G34 0183 000-​1995​.3 25.4 6 ±0.2 6 -0.13 3x0.​063 20 G34 0187 000-​3006​.9 25.4 6 ±0.2 6 -0.13 3x0.​063 20 G34 0189 000-​5308​.8 25.4 6 ±0.2 6 -0.13 3x0.​063 20 G34 0191 000-​1214​4 25.4 6 ±0.2 6 -0.13 3x0.​063 20 G34 0193 000A closer lookMore information regarding laser​mirror coatings in chapter "Thin Film​Coatings".578 Phone numbers: US +1 585 223 2370 UK +44 2380 744 500 Singapore +65 6499 7766

MirrorsFront Surface Mirrors for Illumination Systems• Designed for illumination systems• Substrates are fabricated from low ​expansion material• Aluminum coatings with a protective ​SiO 2overcoating (RAL)• Mirror radii = 2 • f• The matching aspheric lenses are ​stated in the table.Front Surface Mirrors for Illumination Systemsf ± 5 % ​(mm)Ø ​(mm​)Mount, ​outer-Ø D ​(mm)Clear Ø ​(mm)Rm ​(mm)Tolerance ​Ø (mm)Tolerance ​Rm (mm)Flatness​(λ)Matching ​asph. lens ​Part No.Part No.8 22.4 2 -0.5 ±0.3 3 G31 7​704 000 G34 0070 00012.5 1 ) 22.2 5 3 ) -0.5 ±0.3 2 G31 7​704 000 G34 0025 00012.5 22.2 5 3 ) -0.5 ±0.3 2 G31 7​704 000 G34 0029 00014 31.5 2 -0.5 ±0.3 3 G31 7​707 000 G34 0071 00019 50 3 -0.5 ±0.3 5 G31 7​708 000 G34 0072 00020 71 20.5 3 ) -0.5 ±0.3 2 G31 7​705 000 G34 0023 00025 63 4 -0.5 ±0.3 5 G31 7​705 000 G34 0073 00031.5 50 7.7 3 ) -0.5 ±0.3 2 G31 7​705 000 G34 0024 000Í 8 22.4 25 20 2 -0.5 ±0.3 3 G31 7​704 000 G06 3612 000Í 12.5 1 ) 22.2 25 2) 20 5 3 ) -0.5 ±0.3 2 G31 7​704 000 G06 3611 000Í 12.5 22.2 25 2) 20 5 3 ) -0.5 ±0.3 2 G31 7​704 000 G06 3617 000Í 14 31.5 35 29 2 -0.5 ±0.3 3 G31 7​707 000 G06 3619 00031.5 50 50 48 7.7 3 ) -0.5 ±0.3 2 G31 7​705 000 G03 4024 000Í In mount fitting directly to Microbench1 ) RAL UV-coating for the UV spectral region2 ) adjustable3 ) planar second surfaceFront Surface Mirrors for Imaging Systems• Designed for imaging systems• High-precision flatness• Substrates are fabricated from low ​expansion material• Aluminum coatings with a protective ​SiO 2overcoating (RAL)• Mirror radii = 2 • fMirrorsFront Surface Mirrors for Imaging Systemsf ± 1 % (mm) Ø (mm) Rd max. (mm) Tolerance Ø (mm) Tolerance Rd (mm) Flatness (λ) Part No.1000 100 13 -0.22 ± 1.5 1/10 G34 0021 0001500 150 25 -0.25 ± 1.5 1/10 G34 0022 000Phone numbers: Germany +49 551 69 350France +33 47 25 20 420579

Singlets Achromats Laseroptics MV Lenses Zoom Optics Plano Optics Polarization OpticsFront Surface Parabolic Mirrors for Imaging Systemsf ± 2 % (mm) Ø (mm) Rd max. (mm) Tolerance Ø (mm) Tolerance Rd (mm) Flatness (λ) Part No.660 100 approx. 19 -0.22 ± 1.5 1/10 G34 0030 000900 150 approx. 28 -0.25 ± 1.5 1/10 G34 0031 0001200 200 approx. 34 -0.29 ± 1.5 1/10 G34 0032 0001500 250 approx. 45 -0.29 ± 1.5 1/10 G34 0033 000Q-enabledFront Surface Parabolic Mirrors for Imaging Systems• Designed for imaging systems• No spherical aberration• High-precision flatness• Substrates are fabricated from low ​expansion material• Aluminum coatings with a protective ​SiO 2overcoating (RAL)• Mirror radii = 2 • fQioptiq has been a leading manufacturer of optics for surveillance, tracking andimaging systems form UV to infrared spectral range for decades. Together with ourdefense business partners in Europe, we develop and manufacture surveillance andtracking systems for defense applications. Sophisticated surveillance and imagingsystems are a core technology to observe and track any kind of targets or to detectthreats related with any kind of light emission. Surveillance and tracking systemscan have also commercial applications like inspection equipment or security systems.Qioptiq has many years of experience in this field, ranging from the optical and mechanicalsystem design up to manufacturing and assembly of highly complex optomechanicalmodules. Sophisticated selfdeveloped assembly and precise mountingtechnologies as well as special test equipment are used for development and productionof optics for surveillance, target tracking and imaging systems optics.580 Phone numbers: US +1 585 223 2370 UK +44 2380 744 500 Singapore +65 6499 7766