YAWL - User Manual - Polytechnic of Namibia - Mirrors

44 CHAPTER 4. THE EDITORAlignment OptionsThese buttons can be used to assist with the alignment of objects within your specification, when multipleobjects have been selected. Left-to-right, they allow you to align selected objects based on:• top edges;• centres horizontally;• bottom edges;• left sides;• centres vertically;• right sidesThe first selected object is used as the reference to align the other objects to.Object SizesTo increase or decrease the size of an object or objects within your specification, select the object(s) and thenuse these buttons.Cancellation SetsThese buttons allow you to include in and/or exclude elements from the cancellation set of a task.Process ConfigurationThese buttons allow you to preview (left) and apply (right) process configuration settings for a net.Zoom OptionsThese buttons allow you to apply zoom functionality to the currently selected net. From left-to-right, resetthe zoom to the actual size, zoom the entire net out, zoom the entire net in, and zoom into the currentlyselected net elements. You may also zoom in and out on the currently selected net by holding down theShift key and using the mouse wheel, while holding down the Shift + Ctrl keys and using the mouse wheelwill scroll the net’s view left and right.4.2.2 The MenubarThis section provides a brief overview of the YAWL Menus located along the top of the YAWL Editor. Themajority of menu choices are also available via the menu toolbar.