HP Integrity NonStop NS5000T and NS5000CG Servers data

The NSVA of the Integrity NonStop NS5000 serversdoes not use the NSAA hardware elements such asthe Logical Synchronization Unit (LSU), and there is noDual Modular Redundancy (DMR) or Triple ModularRedundancy (TMR) option. There is a single logicalprocessor in the NSVA architecture, as opposed to twoor three logical processors in the NSAA architecture.However, NSVA is still an N + 1 architecture, meaningthat the other processors in the cluster can take overwhen one processor fails using NonStop operatingsystem software. HP ServerNet fabric connectivity fromthe processors is provided by a ServerNet from PCIadapter.The NonStop software architecture remains the samein the Integrity NonStop NS5000 server as in otherIntegrity NonStop servers, providing support for faulttolerance. Therefore, the NSVA provides the samesoftware fault tolerance as the other servers in theproduct family.Manageability is designed into Integrity NonStopservers, not added later. Advanced manageabilityfeatures are delivered right out of the box, even for themost demanding workloads. You can manage largeapplications with a single system image. Availabilityfeatures are built in and automatically configured. Nocomplex reconfiguring is required.Ultimately, with Integrity NonStop servers, HP isdelivering an architecture with value-added innovationby using industry-standard servers and NonStopsoftware fault tolerance.Support of the Signaling System 7 protocolFor Intelligent Network (IN) applications, HP providesvia the HP OpenCall Intelligent Network Serversoftware several interfaces between the IntegrityNonStop NS5000T and NS5000CG Servers andSignaling System 7 (SS7) networks. The availableSS7 protocols all offered on the Tigereye III controllerinclude:• Channelized T1/E1 low-speed links• SS7 over ATM (SAAL) on T1/E1 high-speed links(HSLs)• Unchannelized T1/E1 HSLs (also called clearchannel)• SS7 over IP/M3UA (SIGTRAN)Compliance for MTP, SCCP, TCAP, and ISUP protocollayers is per ITU-T White Book and the ANSI Issue3 standards. Support for China and Japan TTC SS7standards is also provided.HP ServicesHP’s end-to-end Service Solutions built on the Solution Lifecycle (SLC)process, offers consistent quality and service levels for the IntegrityNonStop servers. The SLC process helps achieve rapid productivityand maximum availability by examining specific needs at each offive distinct phases (Plan, Design, Integrate, Install and Manage) andthen designing solutions around those needs. We offer three differentService Solutions designed to meet customer needs. They are:HP Critical Service Solution• Startup and Deployment Services—build the solution to your exactspecifications, complete the installation, and make the solutionapplication-ready.• Assessment and Design services—define requirements and translateyour business and technical needs into a solution that melds thenecessary hardware and software• Deployment Management—upfront project coordination from HP• Education Services—training curriculums relevant to needs andexisting expertise based upon a needs analysis• HP Critical Service—comprehensive ongoing support designed tohelp minimize the business impact of downtime for mission-criticalapplicationsHP Proactive Service Solution• Startup and Deployment Services• HP Proactive 24 Service—integrated hardware and softwaresupport, including proactive and reactive services to improve stabilityand availability across your IT environmentHP Foundation Service Solution• Startup and Deployment Services• HP Support Plus 24 Service—integrated hardware and softwaresupport services designed specifically for your technology.For more information: www.hp.com/services/nonstop