Kerasoft®3 Fitting Guide - UltraVision Group
Kerasoft®3 Fitting Guide - UltraVision Group
Kerasoft®3 Fitting Guide - UltraVision Group
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.kerasoft.co.ukKeraSoft ® 3 <strong>Fitting</strong> ProcedureInsert the initial trial lens from the KeraSoft ® 3 trial set and determine the optimum fitPerform an over-refraction with the trial lens on the eye to establish which powers areneeded, noting the orientation of the laser markIt can sometimes be helpful to perform keratometry or topography over the trial lens in-situ, toestablish the cylinder and axis requiredTo assist with initial orders, single lenses come with a fitting warranty.To order a single lens please state the following:•details of the trial lens used•over-refraction result and orientation of laser mark•back vertex distance (BVD)•the overall diameter (OD) required•for multifocals, please also state which eye is the dominant eye.