KerasoftÂ®3 Fitting Guide - UltraVision Group

More documents

Recommendations

Info

www.kerasoft.co.ukIntroducing KeraSoft ® 3KeraSoft ® 3 is a new soft lens for keratoconus and postgraft fitting. It has a front surface toric design and isproduced in Definitive Silicone Hydrogel 74%* material.The improved design gives good, stable vision with greatercomfort and longer wearing times.ImportantKeraSoft ® 3 is quite different in design and material fromKeraSoft ® 2 and thus cannot be fitted from KeraSoft ® 2 trialsets or ordered using current KeraSoft ® 2 lens parameters.*Definitive is a trademark of Contamac Ltd
www.kerasoft.co.ukKeraSoft ® 3 Lens TechnicalSpecificationsMaterialModulusDefinitive Silicone Hydrogel 74% water content0.38 MPa (Typical of mid water content materials)Base Curves Series 8.00mm (A), 8.20mm (B), 8.40mm(C), 8.60mm(D) *DiameterLens designPower RangeHandling TintDKModalityPack size14.00mm 14.50 mm 15.00mmFront Surface Asphere or Aspheric Toric prism ballasted withbalanced overall thickness. Wavefront Aberration ControlSphere: +30.00DS to -30.00DS (in 0.25 steps) **Cylinder: -0.50 to -11.00DC (in 0.25 steps)Axis: 0° to 180° (in 1° steps)Add up to +3.00 (in 0.25 steps)Clear60 x 10 11 (cm 2 /sec)[ml0 2 /(ml x mmHg)]3-monthly lenses for daily wearSingle lens, 2-pack* 8.80 and 9.00 available if required** Extended range of powers available to orderDefinitive is a trademark of Contamac Ltd
Page 4 and 5: www.kerasoft.co.ukKeraSoft ® 3 Tri
Page 6 and 7: www.kerasoft.co.ukBenefits of Silic
Page 8 and 9: www.kerasoft.co.ukRemoving KeraSoft
Page 10 and 11: www.kerasoft.co.ukKeraSoft ® 3 Fit
Page 12 and 13: www.kerasoft.co.ukOrdering KeraSoft
Page 14 and 15: www.kerasoft.co.ukKeraSoft®3 Case
Page 16 and 17: www.kerasoft.co.ukKeraSoft ® websi

KerasoftÂ®3 Fitting Guide - UltraVision Group

Create successful ePaper yourself

Delete template?

Save as template?