ESA-E Series Spectrum Analyzer - Agilent Technologies

More documents

Recommendations

Info

AmplitudeSpecifications (continued)ESA-E spectrum analyzer(express or custom configuration)EXA signal analyzerSpurious responses Typical values shown in italicThird order intermodulationdistortion (TOI)For two –30 dBm signals at inputmixer a and > 50 kHz separationFor two –30 dBm signals at input mixer withtone separation > 5 times IF prefilter bandwidth,20 to 30 °C, see specification guide for IFprefilter bandwidths10 to 100 MHz 7 dBm, characteristic NA100 to 400 MHz < –85 dBc, +12.5 dBm; +16 dBm TOI –80 dBc, +10 dBm, +14 dBm400 MHz to 1. 7 GHz –82 dBc, +11 dBm, +15 dBm1.7 to 3.0 GHz –86 dBc, +13 dBm, +17 dBm3.0 to 3. 6 GHz < –82 dBc, +11 dBm; +18 dBm TOI3.6 to 6.7 GHz –82 dBc, +11 dBm, +15 dBm6.7 to 7.0 GHz < –75 dBc, +7.5 dBm; +12 dBm TOI7.0 to 13.2 GHz –82 dBc, +11 dBm, +15 dBm13.2 to 13. 6 GHz < –75 dBc, +7.5 dBm; +11 dBm TOI13.6 to 26.5 GHz –78 dBc, +9 dBm, +14 dBmSecond harmonic distortion2 to 750 MHz - 40 dBm toneat input mixer a10 to 500 MHz - 30 dBmtone at input mixer a500 MHz to 1.5 GHz - 30dBm tone at input mixer a1.5 to 2.0 GHz - 10 dBm toneat input mixer a> 2 GHz - 10 dBm toneat input mixer a< –65 dBc, +35 dBm SHI< –75 dBc, +45 dBm SHI< –85 dBc, +75 dBm SHI< –100 dBc, +90 dBm SHISee EXA Data Sheet or EXA Specification Guidefor SHI detailsa. Mixer power level (dBm) = input power (dBm) - input attenuation (dB).10
AmplitudeSpecifications (continued)Display rangeLog scaleSTD/STG expressanalyzer or ESAwith Option AYXESA spectrum analyzerCOM express analyzeror ESA withOption B7D/B7E0.1, 0.2, 0.5 dB/division1 to 20 dB/division in 1 dB steps (10 displaydivisions)EXA signal analyzerAll frequency ranges0.1 to 1 dB/division in 0.1 dB steps1 to 20 dB/division in 1 dB steps (10 display divisions)Linear scale 10 divisions 10 divisionsScale unitsdBm, dBmV, dBµV, dBµA, A, V, W, and Hz(Option BAA or AYQ)dBm, dBmV, dBµV, dBmA, dBμA, V, W, and ATrace detectorsPeak, negative peak, sample, rmsb, videoaveragingPeak, negative peak, sample, normal,log power average, RMS average, and voltage averageStandard analyzer orESA with Option AYXResolution bandwidth switching uncertaintyESA spectrum analyzerCommunications testanalyzer or ESA withOption B7D/B7EReferenced to 1 kHz at reference levelEXA signal analyzerAll frequency rangesReferenced to 30 kHz RBW1 Hz, 3 Hz RBW±0.3 dB (Option 1DR,Option 1D5)±0.3 dB (Option 1D5)10 Hz, 30 Hz RBW ±0.3 dB (Option 1DR) ±0.3 dB100 Hz, 300 Hz RBW ±0.3 dB (Option 1DR) ±0.3 dB1 Hz to 1. 5 MHz RBW ±0.08 dB1 kHz to 1.5 MHz RBW±0.3 dB1.5 to 3 MHz RBW 1.6 to 3 MHz RBW ±0.1 dB5 MHz RBW ±0.6 dB 4, 5, 6, 8 MHz RBW ±1.0 dB11
Page 5: FrequencySpecifications (continued)
Page 8 and 9: AmplitudeSpecificationsAmplitude ra
Page 12 and 13: AmplitudeSpecifications (continued)
Page 14 and 15: Tracking GeneratorIn order to gain
Page 16 and 17: General SpecificationsESA-E spectru
Page 18: www.agilent.comwww.agilent.com/find

ESA-E Series Spectrum Analyzer - Agilent Technologies

Create successful ePaper yourself

Delete template?

Save as template?